Screen goes blank after windows boots up.

i just updated my graphics driver through HP SUPPORT ASSISTANT when suddenly my laptop went blank and restarted on its own and after the windows logo i got a blank screen but the process is running in the background,just the display is gone.i rebooted in safe mode and disabled my graphics driver Radeon HD 6490M and it booted normally but with a lower resolution.i am not sure what the problem is.
my laptop model is HP PAVILION dv6-6119tx
This question was solved.
View Solution.

yes the issue is solved.just boot into safe mode and disable the ATI graphics driver.then boot the into normal WINDOWS.the screen resolution will be low and now UNINSTALL INTEL graphics driver.then restart your system.now when you boot into WINDOWS,the INTEL driver will get installed automatically.if you are connected to the internet,the driver will be downloaded from WINDOWS UPDATE.so you need to skip that step.and the driver will get installed from existing folders.after it gets installed reboot your system.and it should work fine

Similar Messages

  • My screen goes blank after I see the white start up screen

    My screen goes blank after I see the white start up screen

    What kind of iMac do you have?  A PowerPC G3, G4, G5, or an Intel-based iMac?  What OS are you using?  OS 9, OS 10.2.x Jaguar, 10.3.x Panther, 10.4.x Tiger, 10.5.x Leopard, 10.6.x Snow Leopard, 10.7.x Lion, 10.8.x Mountain?
    This particular forum is for older PowerPC G3, G4, G5 iMacs running OS 10.5.8 or older.  If your iMac was made after 2006, then you have an Intel-based iMac.
    That being said, here are a few tips to try:
    Option 1
    Restart the computer while holding down the Option key.  This will tell the computer to look for bootable drives.  If it finds your normal startup disk, select let, then click the right pointing arrow to boot up the computer.  Now open up System Preferences> System> and select your normal Startup OS as the default startup disk.
    Option 2
    Reset your PRAM.  Press and hold down the Command Option P R keys while starting your computer.  You will hear the startup chime.  continue holding down those keys until you hear the startup chime a second time.  Release the keys.  If the computer restarts, you will need to reset your Date and Time.  It might be time to replace your PRAM battery.
    Option 3
    Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer.  Let it sit for one minute.  Press and hold the power on button on the back of the iMac while plugging in the power cord.  Release the power on button.  Count to five, the press the power on button again.
    Option 4
    Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer.  (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.) 
    Continue holding the C key until you see the OS starting to load.  DO NOT do an OS installation.  At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility.  On the left side of the window that opens,select your normal OS drive.  Click First Aid at the top middle of the window if it isn't already selected.  Click Repair Disk from the lower right area of the window.  When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
    When that is done, quit Disk Utility.  From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk.  Restart the computer.  If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
    Good luck.

  • When i open the itunes store, the screen goes blank after 2 seconds so I cant order music

    When I open the itunes store, the screen goes blank after 2 seconds, so I cant order any music?

    same thing with me have you found an answer? the only thing i cant think of is to download the new itues but when i try they are haveing problems with the site or something and i cant dowload it.

  • IPhone 4 screen goes blank after lock screen

    My iPhones screen works perfectly on the lock screen but as soon as i enter the passcode it goes blank.
    Its still fully functional in terms of recieving calls, vibrating, screenshotting etc. but what could i do to fix it.
    I've already tried reseting the settings by holding the home and sleep button at the same time.
    What else can I do?

    I'm sorry, but this makes no sense. What do you mean by "screenshotting"? How can you tell anything is working if the screen goes blank after you enter the passcode?
    If a reset didn't fix it, try a restore. If that doesn't fix it, restore it as a new device.

  • Satellite A100: Screen goes blank after a while of no action and can't be reactivated

    Hi all
    I am after a bit of advise/help. I have a satellite A100 & after its been on for an extended period with no keyboard input (like burning dvds), the screen goes blank. It doesn't matter which keys I press I can't make it come back on. The only way out of it that I have found is to restart the machine.
    Any help would be greatly appreciated
    Thanks
    Gary

    Hi,
    normally this means the machine is in standby mode (power LED is blinking orange). To reactivate you have to push the power button. Then it should bring back all opened windows as before going into standby.
    You can deactivate standby function in the power management. (Start -> control panel -> power management)
    Bye

  • Screen goes blank after a few mins, no matter what I do

    I have a slight problem: I ran an update, which brought me a brand-new shiny kernel and a brand-new shiny xorg-server. It took me a few days until I bothered to reboot my computer and after that things got hairy.
    After a few minutes, screen goes blank.
    I set a screensaver of my Gnome desktop to 2 hours, no effect.
    Power manager sliders have exactly to positions: 2 hours 1 minute and never, neither one has any effect on this.
    I said 'xset dpms force on', no effect.
    Even when I try to watch a movie with mplayer, screen still goes blank after a few minutes (usually mplayer inhibits this kind of stuff).
    Now, I find it really hard to believe that this could be any hardware issue, after all, if video card or display would be faulty, I would probably either get a picture on the screen or don't get a picture on the screen, not some unwanted screen suspend every few minutes.
    So I have to assume it's a software thing. Kernel doesn't seem very likely to be the guilty one, so I guess it is that steaming pile of crap we know as xorg-server, which got upgrade from 1.6.1 to 1.6.1.901 (sounds like wannabe-1.6.2), to be take the blame here.
    There is no 1.6.1 package in the cache or in any repos I checked, so hard to downgrade. Of course I could hack some pkgbuild from AUR and install that, but somebody told me that I would probably also have to compile drivers against that so if that's correct (is it?), then I would consider that as a last option.
    Any ideas?

    http://bbs.archlinux.org/viewtopic.php?id=70733&p=1

  • Screen goes blank after 10 secs when i access hotmail

    my screen has been going blank after 19 secs when I open Hotmail or the farmville game. The audio however is fine but the screen turns blank (grey).
    This problem started after I downloaded IOS 5 for my iPad on the imac and then synchronised my itunes from iMac to iPad. I alsoactivated i Cloud.

    Yeah, I think it must just be an insanely infrequent occurrence, since no one on here has replied in a couple days besides you. I know the screen is supposed to stay on the entire time that there is an incoming call from the lock screen now, since I had a chance to ask a few friends that just got iphones as well. I'm thinking a restore would fix the problem, although I think I'm just going to wait until there is an update, which I would assume would be soon, before I do the restore, since its just an annoyance and not a problem.

  • Windows 7 boot camp screen goes black after windows startup screen!!!!!!

    A few days ago when I tried to start my MacBook Pro in windows 7 (enterprise) I encountered a completly black screen after the startup screen.
    1) Choose start in Windows 7 from boot camp menu (holding option after starting up computer)
    2) Windows start up screen would appear and finish
    3) For a very brief second my cursor pointer would appear and login screen would flash onto the screen, then the screen would go black
    BUT
    I CAN boot windows 7 in safe mode
    The computer is still on when screen goes black (fan still running and i can use keyboard commands to shut down the computer)
    I've been searching the Internet for DAYS to no avail
    PLEASE someone help me....... ive already tried the sfc /scannow and dskchk commands in the command prompt window

    Win 7 Enterprise is not supported by Boot Camp, you may or may not get it to work reliably, (I would not bother to try)
    Read this document then pick a supported version of Windows for your Mac.

  • Home screen goes blank after making calls with OS 4.0 (3G)

    Since the OS 4.0 update, my home screen keeps going blank (black) after making/receiving a phone call. I have to turn the iPhone off and back on again to gets the Apps back up on screen.
    Anyone else having this problem?

    I have had a similar problem. After I make a call, the screen goes black and a random keyboard comes up and does nothing. I have to wait for a while untill it works again

  • Ipod screen goes blank after ios 5 update

    I've been having this issue since the ios 5 update, but it seems that sometimes when I use my ipod on my ipad I hit either playlist, artist, or ect and my screen goes all black. A temp fix is powering the ipad off and on agian. I thought that with the release of the update to ios5 would fix it, but I'm still having the issue.

    Hello Apple,
    I have iPhone 5s and when I updated iOS 8 on my phone,  I am getting same issue "blank screen" and when after few days when iOS 8.0.2 launch I again updated new version but still facing same issue.
    I dont no what is problem with iOS 8, I am going to downgrade my iOS 8 to 7, if apple will fix this issue I will update new version of it.
    Rizvan

  • G62 b05sd screen goes black after windows logo

    Hello,
    My laptop has been turning of at random lately and now the screen turns black after the windows logo appears, though the start-up tune can be heared. I've tried connecting it to different external monitors yet it doesn't work. I've been able to start-up in safe mode and tried updating BIOS using both HP support assistant as well as manually. HP sup. ass. also doesn't indicate updating anything. The battery is essantially dead, yet i've used the laptop for a long time using the adapter only. 
    My next step is to do a windows system recovery, but I want to see if the issue can be resolved differently.
    Thnx

    Hi @frankkilsdonk , 
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP G62-b05SD Notebook and issues with freezing on the Windows logo. It is trying to load something . I would look at what is in your startup file in Windows.
    You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. If you installed new software on the Notebook you might want to uninstall it as this could be the issue as well.
    When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • I have a iq 804 and tried to upgrade to win 8, but the screen goes black after windows update.

    i have been working with microsoft support for 5 hours everyday for the last 5 days. they could not help, now they ask to wait for hp to come out with new drivers to support win 8.any idea if they are going to add those since my computer is 3 years old

    Here are the specs for your HP TouchSmart IQ804 Desktop Computer. According to the specs, this model shipped with Windows Vista 64-bit and was introduced for sale on or about 27-Aug-2008... making it almost 5 years old. Due to its age, HP has no intention of providing specific support or drivers for this model. Please read HP's position below.
    THIS is HP's position on Windows 8 support and any HP computer not originally supplied with Windows 8;
    1) Not all Windows 8 features may be available on all PCs.
    2) Your particular experience with Windows 8 will be determined by the capabilities of your PC.
    3) HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
    4) If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
    5) Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
    and
    Important information regarding additional limitations and requirements;
    1) Screen Resolution Requirements
    2) Limitations with DVD playback software
    3) Limitations with Blu-ray playback software
    4) Limitations with TV Tuner software
    5) Secure Boot & other UEFI dependent features
    6) Limitations with touch screen capabilities
    "Windows 7 (also includes Windows Vista) PCs with touch screens will not have full Windows 8 touch capabilities after upgrade. HP PCs with touch input hardware designed for Windows 7 will provide a comparable experience for only two touch point applications after the upgrade to Windows 8. HP Windows PCs with touch input hardware will not support Windows 8 applications that require more than two simultaneous touch points. Additionally, Windows 8 edge swipes may not be available due to the recessed bezel on HP touch systems shipped with Windows 7."
    7) HP TouchSmart Magic Canvas and HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before upgrading. Note that content created using the TouchSmart applications such as Graphitti will not be available after upgrading.
    With all of that said, you may be able to install Windows 8 and it may work but many of its features may no longer function under Windows 8. 
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • [Solved] Screen goes blank after ten minutes

    When I let my Asus EEEPC (1005HAB) idle on battery (especially if I'm watching something with VLC), after ten minutes the screen turns off. I can move the mouse or press a key to bring it back, but that gets to be annoying when I'm engrossed in a movie. I'm assuming this has something to do with a screensaver or power management setting. Correct?
    I'm running Mate 1.8.1. The power management is set to put the display to sleep after 1 hour. And running pacman -Q mate-screensaver returns package not found. I have looked through the dconf settings, but haven't been able to find the correct setting to change (if its even in there).
    Last edited by neon612 (2014-07-30 01:30:16)

    xset -q:
    Keyboard Control:
    auto repeat: on key click percent: 0 LED mask: 00000000
    XKB indicators:
    00: Caps Lock: off 01: Num Lock: off 02: Scroll Lock: off
    03: Compose: off 04: Kana: off 05: Sleep: off
    06: Suspend: off 07: Mute: off 08: Misc: off
    09: Mail: off 10: Charging: off 11: Shift Lock: off
    12: Group 2: off 13: Mouse Keys: off
    auto repeat delay: 500 repeat rate: 30
    auto repeating keys: 00ffffffdffffbbf
    fadfffefffedffff
    9fffffffffffffff
    fff7ffffffffffff
    bell percent: 50 bell pitch: 400 bell duration: 100
    Pointer Control:
    acceleration: 2/1 threshold: 4
    Screen Saver:
    prefer blanking: yes allow exposures: yes
    timeout: 600 cycle: 600
    Colors:
    default colormap: 0x22 BlackPixel: 0x0 WhitePixel: 0xffffff
    Font Path:
    /usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,built-ins
    DPMS (Energy Star):
    Standby: 7200 Suspend: 7200 Off: 14400
    DPMS is Disabled

  • Screen goes blank after clicking OK to welcome screen in shared review

    I have a client who cannot view a particular document.  The document is about 150MB and has shared review enabled over WebDAV and has been reader extended.  The client is using Windows 7 and Reader XI 11.0.05.  She can view other shared review & extended documents ont the website just fine.  Others that are using Win7 & the same exact version of reader can view the document just fine (even the others on her network).  So it just seems to be her computer.  When she views the document in IE, the background image comes up fine and she gets the shared review welcome screen.  When she clicks OK, the screen flickers and goes grey and seems to crash IE.  We've tried downloading the file, then opening reader from the desktop and clicking Open and selecting the file, but Reader either never opens or freezes.  We've also tried reinstalling reader and updating it, then rebooting the computer, but it doesn't seem to change anything.  Has anyone else experienced anything similar, or have any suggestions on where to look?

    Hi @rshetty ,
    Have you added a screen protector, a case or a cover for the phone? From the description it sounds as if something is blocking the proximity sensor on the phone. - Has it behaved like this since new?
    Hans

  • My 8330 turns on then 2 seconds after goes blank. Upgraded software and battery and still the screen goes blank after it goes to my home screen. Attached to this post is a video of the phone after I pull the battery and put it back in. I think it is still

    http://www.youtube.com/watch?v=rY_WU8WadXE

    Did you perform a battery pull afterwards?
    With the phone POWERED ON, remove the battery for 15-30 seconds, then reinsert and wait for the phone to completely reboot.
    "Cats may taste like chicken, but they have more bones than rabbits."
    Blackberry 101
    Tips & Tricks
    Videos to learn from on youtube

Maybe you are looking for