Screen goes pink ....

Screen goes pink with static lines and MBP freezes up.  Typically happens when opening iPhoto. Going on for 2 months now, becoming unusable.  Is this a hardware or software fault?

It would be hardware.  Do you see the problem anywhere else?
Try changing graphic processors to isolate the issue: http://codykrieger.com/gfxCardStatus
You can run the Apple Hardware Test, but I do not see this a definitive answer: http://support.apple.com/kb/ht1509
I would take it to an Apple Retail Store or an Apple Authorized Service Provider  (AASP) for evaluation, or call your nearest Apple Contact Center. Visit the Genius Bar at the Apple Retail Store,  make a reservation.

Similar Messages

  • Why does my screen going pink?

    screen goes pink every now & again. Need to shut down for 5 minutes then all is fine.

    Bring your phone in to Apple for evaluation. 

  • My MBP's screen goes pink

    When I plugged the charger and turn the power on, my mid 2009 MBP's screen goes pink completely.
    I thought it caused by software problems so I restart, but the screen is still pink.
    What should I do now?

    It may be that the MBP overheated and that the internal shut down was engaged.  Run an Apple Hardware Test and see if it develops any issues:
    http://support.apple.com/kb/ht1509
    Ciao.
    The test may have to be started by pressing the OPTION D keys.
    Message was edited by: OGELTHORPE

  • The whole screen goes pink suddenly with vertical lines.

    Our iMac is 3 years old and lately we've been getting this thing where the screen suddenly goes pink with lines down it and we have to turn the power off to get ris of it. Once it went white. I'm really hoping this is something we can deal with and fix before it becomes fatal. We absolutely cannot afford a new computer right now. Anyone had this happen? Know what it's about? Below are my computers specs.
    Model Name:          iMac
      Model Identifier:          iMac8,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.66 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          2 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          IM81.00C1.B00
      SMC Version (system):          1.29f1

    i already tried to move or tilt the screen and even press it but still the screen is pink... Yes perhaps I need to bring this again at the service center  Thanks!

  • Screen goes Pink/Redish under Windows XP

    Hello All,
    I am currently running 10.5 on my wifes Macbook 13". My wife using XP on the macbook for her real estate. However when it gets hot the screen turns pink in color and redish. I have a fan blowing air in it now via USB. However if i boot to the Mac side right away it stays like that. However if i am running it on the Mac side the whole time the screen never does that? Any Ideas.

    Hi
    I have connected the dynadock to my Vista notebook and to an external LCD display.
    Everything seems to be ok. No flickering!!!
    I dont know why your external monitor flickers but maybe you should try to change the screen resolution and the screen refresh rate
    Try this

  • Hpx2301 screen goes pink and green

    so far so good

    Hello skidrowe. I'm not sure exactly sure what is happening. Please let me know and I can try to assist you if necessary.
    Mario
    I worked on behalf of HP.

  • Screen going crazy, pink horizontal lines, frequent random crashes?

    Hi all,
    First post here... I felt compelled to post as usually Googling a problem will bring me to a solution from one of these discussions but in this case there are many similar instances of my problem but no-one seems to be able to offer an explanantion that fits my particular circumstances.
    I have a late 2011 MBP 15"
    Processor = 2.2 GHz i7
    Memory = 4 GB 1333 MHz DDR3
    Graphics = Intel HD Graphics 3000 384 MB
    OS = OS X 10.9.2
    Recently, my screen started randomly going crazy, all blocky and with horizontal pink lines all over. Then it would go either fully black or fully white. This usually happens when I open another tab or app. Sometimes it crashes and powers off. Sometimes it restarts.
    If it powers off and I restart it or it restarts itself, the horizontal pink lines appear on the startup/spinning gear screen.
    Then the screen goes fully white and the fans go crazy. Now it sometimes just stays hung like this and sometimes it powers off after about 3 minutes of crazy fans.
    I switch it back on and it does the same thing.
    It gets stuck in this loop for ages and often, if I just leave it and come back to it some other time, it powers up just fine however sometimes it will continue to refuse to power up.
    If I try to boot into recovery mode, it blue screens.
    If I try to boot into safe mode, it blue screens.
    If I try diagnositics, it blue screens.
    What could the problem be and how do I fix it?

    I've had a similar issue with my mid-2012 13" non-retina MacBook Pro twice. First time I dropped it and it fell hard ( I mean it fell down a flight of stairs). It sounds like your graphics card and/or logic board and possibly the RAM sticks might have an issue. For me, a new logic board costs about $480 but Apple covered it twice since its less than a year old. Other issues I've had it would have a "checker-board" on startup and it would have a similar glitch when I would move it or set it down. It would also freeze and even shut down. I've also pulled it out of my bag, and it would be a lot hotter than when I put it in. I'd say set up a Genius Bar appointment or take it to a local certified apple service technician or if you really wanted to, setup an appointment and find out what's wrong and then repair it yourself, just make sure your data is backed up. I would suggest back it up to both iCloud and an external hard drive that can hold more data than the internal drive on your mac.

  • Screen is pink and purple at startup

    When I turn on my 2011 MacBook Pro, the screen is pink and purple at startup. What is happening? Is my screen going out?

    Please make a Genius Appointment and take it in for service.

  • Itunes 8 main screen is PINK!

    Hi guys
    I've just updated to v8 and the screen is as per pic. It looks the normal colours (grey) when first started but then goes pink when I click anything!
    I'm using XP home and had no such problems with v7.
    Any help would be welcome. Kind regards,
    [IMG]http://img216.imagevenue.com/loc98/th91429_itune8_12298lo.jpg[/IMG]

    Sorry about that, Problam with the pic.

  • Tecra 8100: solid vertical white & screen goes blank

    Hello,
    My Tecra 8100 has (or used to have) what seems to be a 'known fault': screen goes blank, can be got back by pressing fn+f5 or the little metal button.
    It also acquired a solid vertical white line about 1mm wide and about 30mm from the left hand edge. I managed to stop the blanking (backlight?) problem (thankyou to those who replied to my previous, now locked, question!) by taking the cover off the screen and unplugging and replugging the inverter. So now the screen always stays on. Unfortunately the white line is still there, and whereas previously the screen was normal except for the line, now everything to the right of it (i.e. all but 1" of the screen) is just multicoloured stripes.
    What do you think? I've been told that all the inverter does is power the backlight, which suggests the lines problem is something else. But they happened at the same time. Also, as far as I can remember, when I was fiddling about with the inverter connection the lines problem came and went (then came and stayed). Could it still be a bad inverter connection? Or a broken inverter? Or more likely to be something else?
    cheers,
    George

    If it indeed is a loose connection its really no more difficult then when you undone the display to reconnect the inverter. A few more screws and you will be able to lift the display off the harness and check the connector in that connects the display to the inverter (not the white and pink wires, thats the inverter backlights, but the wire that plugs in to the left side of the inverter and goes up the back of the display and connects to it. It is a flat cable) When you reattach this cable if you choose not to take it to an ASP, make sure to tape it down good so it does not come loose again. After this if the problem is not resolved, your display is broken and will need to be replaced. It can be costly.

  • Screen goes black when hooking up to TV via mini-DVI to video adapter...

    Hello,
    Ever since I upgraded my PB12" to 10.5.x (now running 10.5.5, but this issue has been there since upgrading to 10.5.1), when I hook up the mini-DVI to video adapter (different adapter than for hooking up to an external display as the mini-DVI to video adapter has composite and sVideo out) to my TV, the PB screen goes black. It's set up to mirror the PB on the TV, and the PB continues to run, picture works on the TV, but I loose picture on the PB. Only way to get it back is to reboot the PB (with the mini-DVI to video adapter unplugged). So, basically, if I try and use the mini-DVI to video adapter, I loose picture on the PB. This never happened under 10.4.x — only since upgrading to 10.5.x.
    Anyone have this issue? Know of a fix?
    Thanks,
    Kristin.

    If you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.
    If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that can combine video and audio to HDMI.
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

  • Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  What's wrong and how do I fix it?  Help!

    Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  Tried it 10 times with the same result.  What's wrong and how do I fix it?  Help!

        Oh no Mr.Ected!
    I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
    AmberF_VZW
    Follow us on Twitter @VZWSupport

  • Computer Screen going blank and computer not responding

    I have had a problem when in the middle of doing something my computer screen goes blue and all you can do is power it down. Any suggestions??

    That didn't work. On trying to install a new driver I got the error the graphics driver could not find compatible graphics hardware. Is there anything else that can be done to at least prevent the hanging of the computer even if it means less features from Firefox being available?

  • Mid 2010 MacBook Pro crash - screen goes black

    There is a major problem with the mid 2010 Mac Book Pro's and Lion.  I suspect that it is related to the drivers for the NVIDIA GeForce GT 330M 512MB video card and perhaps the i7 processor.  The crashes are random and most often occur after a mouse click then the screen suddenly goes black and a restart is forced.  There is a thread on MacRumors that describes many others with the same problem: http://forums.macrumors.com/showthread.php?t=1182104
    The crash occurs less frequently when the power and external monitors are connected.  When the MBP is unteathered it crashes every 20 minutes.  I am really surprised and disappointed that a bug this severe made it through final testing. Looking forward to 10.7.1.
    Scott

    im so glad im not the only one with this problem. at least i know its not because some careless things i unconciously did that makes my mac gone berzerg like this.
    i also encounter the exact same problem with all of you. problems started a month ago. at first it was just once in a while then it became a frequent thing especially when my battery left with 20-30%. then after i plugged in the magsafe, its okay. lately, nothing safes the mac from crashing, particularly when im running adobe and/or autocad. i thought it was software problems so i backed up my files, performed erase and install snow leopard then made an even bigger mistake by upgrading to lion. after finish upgrading, the crashings got even more often. every starting up, after i got a glimpse of login in, pufffttt, screen goes black but keyboard still on. googled it up and say reseting smc will do the trick. eeekkkk nothing! then resetting the pram. worked okay for quite some times then puufffttt, crash! ask a question on yahoo answers and got a help from lovely person to install gfsxcard-something and told to opt for integrated only. worked fine for 2 days and still went back to crashing. opened up the mac, testing each rams, reshuffling em, still got nothing. the only thing that enables me to do my work with this Majestic mac is resetting pram everytime i turn it on.
    since im living in singapore (bought this mac june'09 in melbourne,australia), there is no genius bar to be found, running a diagnostic only at any apple service cost me 120 bucks and if i have to change the logicboard, its gonna cost me ard 1000++ dollas since i dont have any applecare and my warranty expired 4mnths ago. so, i might be killing myself soon! yauuzaaaa

  • Help I just installed the latest update on my IPhone4 and now I can't open any of my stored podcasts. When I hit the podcast icon, the screen goes white for a second and the goes back to the opening page with all the icons. What happened?

    Help! I just installed the latest update on my IPhone 4 and now I can't access my podcasts. When I hit the podcast I on, the screen goes blank for a second and then opens to the home screen with all my icons. What happened?

    Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.

Maybe you are looking for

  • Error in FM RV_MESSAGE_UPDATE in MIGO transaction

    Hi, I am facing the the error in FM RV_MESSAGE_UPDATE for MIGO transaction as below: Report          SAPLMIGO Transaction     MIGO Error details   Class:     FPRUNX     Error Number:    102 - No job started Status : Update was terminated I have check

  • I accidentially deleted podcasts from 2010.  I want to retrieve them, they are no longer available on line.

    I was in ITunes, in my Podcasts list.  I hit the icon (semicircle, with an arrow pointing clockwise) and all my podcasts were deleted.  They were also deleted from my IPod.  The podcasts were from 2010 and are no longer available in ITunes.  Is there

  • Print out of sales tax pre-announcement

    One of our customers demands some changes within the Business One. The support in Ireland advised us to post these requirements in this Forum. At the moment it's not possible to get a print out of the sales tax pre-announcement. In our customers opin

  • Constant Checking in Row Formula for Report Writer

    Dear All, Please advice what is the format to check a constant (string) in the row formula for Report Writer. Let's say if I want to check the cost center group --> If '&1KOSET' = 'ABC' then .... else...... So, what is the format for ABC? Because if

  • Flexconnect with ISE Issue

    Hi Everyone, I have a issue trying to deploy Flexconnect in WLC integrated with ISE. In the scenario, the users are working properly through the wireless network and they are able to authenticate, the NAC agent is invoked and everyone can get authori