Screen goes to neon colors in Intel HD Graphics control panel

This computer comes with an Nvidea 850 GTX + 4gb card
Whenever I try to change brightness settings in the HD Graphics control panel, my entire screen become illegibly pixelated and turns to neon colors. I can't read or see anything exept pixels and neon colors when this happens. This happens when I move the slider, I don't even need to apply the settings for it to happen.
The only way to get back to a normal display is to close my screen and open it back up again.
How can I fix this? I just got this computer after sending another one back for a hardware issue?
Thanks!
UPDATE
This problem is no longer occuring, please mark this as solved! I don't know what the solution was, I haven't done anything.
Thanks!
This question was solved.
View Solution.

Hi @Emmaus7
Thank you for visiting the HP Support Forums and Welcome. I think that a restart updated the software which has resolved this issue.
Thanks for sharing with us.
Have a good week.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

My imac screen is glowing neon colors works fine just has black backround and glowing icons so i can see anything in regular color

my imac screen is glowing neon colors works fine just has black backround and glowing icons so i can see anything in regular color

Check Universal system preferences --> seeing --> display

Color Laserjet pro MFP M176n control panel not working

the control panel in the Color Laserjet pro MFP M176n is not working, is all blank, i can´t see anithhing in it. Is there a reset button or should i take it to the store where i buy it for a checkup?
thank you

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Screen going bad. Colors are streaked and messed up

Bad screen. Original iPad. Colors on screen are full of lines as if the color projection has gone bad.

Have you tried resetting your iDevice?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

My IBook G4 died, Screen goes through some colors then nothing

It was running ok, I put it to sleep, then this morning it would not turn on. Nothing. I tried taking battery out and put it in and the screen displayed, orange then green, then blue then white then black. No hard drive sound. Yery dead. Same with external power. Bot a little over 1 year ago so warantee gone. Suggestions?

Logicboard failure, prepare for a hefty bill. It could also be that you cracked one of the video chips, how do you handle it? If you pick it up by the lower left corner occasionally, this will happen, apple still hasn't admitted this is a problem, but there has been thousands.

MBP Screen goes black and then restores. NVIDIA graphics card issue?

I've got a mid-2007 MBP, 2.4 GHz, 4 GB RAM, running 10.6.2.
Over the past couple of days I am having random losses of video screen. I will be on a webpage, doing nothing with it, and the screen will go momentarily black. It normally lasts for a few seconds, then restores. Nothing I do seems to affect the blacking out or the restoration.
I have the NVIDIA GeForce 8600M GT graphics card.
Any suggestions / input on whether I am experiencing the failure? FWIW, computer is still under Applecare.
Thanks

See this KB article:
http://support.apple.com/kb/TS2377
I have similar issues with my MBP. However there is also a widespread issue on the forums in which the trackpad and keyboard stops responding, and it may be difficult to tell if the problem is loss of video or loss of input ability when the display goes to sleep automatically. I'm currently in this boat. I'm not quite sure if I have a video problem of if this is the issue with the trackpad/keyboard connection.
The video card issue appears that apple will pay for out of warranty but they are not addressing the widespread problem with trackpad and keyboard loss of function and if you are out of warranty you are out of luck.
Message was edited by: Bryan Brindeiro

Apple PowerMac G5 Powers up Half way from desktop loading up screen goes

Hi All I have A Apple PowerMac G5, Just given free Powers up, i hear the apple chime, It starts to boot/load up, i can see the round spinning thing, happening, but then just about Half way from desktop loading up, the screen goes blank,
I have tried replacing the graphics card, tried replacing the memory, but still nothing, if anyone has any suggestions i would be grateful

Resetting PMU:
http://docs.info.apple.com/article.html?artnum=300341
http://www.felipecruz.com/reset-pmu-and-non-volatile-ram-g5.php
Installing software:
http://www.info.apple.com/kbnum/n106692
Once you determine if this is DOA or worth dealing with...
I would buy a copy of Tiger 10.4.6 now on DVD.
You are going to want/need more than 256MB RAM, too.
I would never rely on a pre-installed system other than when bought new/ref'd from Apple. I would always just wipe it totally clean.
You can find 160-300GB SATA drives for $68 - 120US.
PMU reset would be good idea. and I would make sure that it can boot into the Open Firmware screen where you can also reset nvram. If it can't get into that screen, which is not dependent on OS etc. then you have a more serious hardware or logicboard problems.
Might want to start with Apple's Mac 101 Help:
http://www.apple.com/support/mac101/help/
boot into Open Firmware Reset NVRAM
boot into Single User Mode and runafter any freeze or hard restart or when you need to check the integrity of the drive's catalog directory.
Then, try
Repairing Drives
Complete FAQ
Diagnose & Fix System
Kernel Panics
MacWorld FAQ
Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
G4 MDD 1.25 1.75GB UL3D 15K/10K RAID Mac OS X (10.4.6) SoftRAID 3.5
G4 MDD 1.25 1.75GB UL3D 15K/10K RAID Mac OS X (10.4.6) SoftRAID 3.5

Windows 7 Control Panel Display and Intel Graphics Media Control Panel Constantly

I have a Nvidia NVS 5200 M running with Intel 4000 and Windows 7 on a Lenovo T430S.
Whenever I load the Control Panel -> Display settings, I can see options just fine, but I click on any of the drop down menus and they appear for a second, then immediately disappear (fast enough that I can't change settings).
There's a similar problem when I look in the Intel Graphics Media Control Panel. It constantly appears to be "loading" - the mouse icon turns into a little blue circle off an on, continuously. Similar thing with the settings, too - they appear and let me change them, but immediately return to the original setting. I can change them if I act SUPER quickly to make the change then click Apply. But 99/100 I'm not fast enough.
All drivers are up to date. I have no idea what to do (reinstall or uninstall this Intel Graphics control panel? How? Or somehow change a setting on my graphics card).
Please help!

Try uninstalling both drivers, then reinstalling them. Sometimes a clean driver update works better.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Intel HD Graphics driver on Yoga 2 Pro fails after Windows 10 upgrade

Yoga 2 Pro. Everything working fine under Windows 8.1. Upgraded to Windows 10 RTM version. Intel HD Graphics device failed, message in Device Manager is "Windows has stopped this device because it has reported problems. (Code 43)". Installed the latest Windows 10 driver for Yoga 2 Pro from the Lenovo support site (driver dated 7/15/2015). This did not fix the problem. Interestingly, the first time I installed the driver from the support site (I tried it twice), I received a message stating "I already have a newer version of the driver installed". I chose to overwrite/install anyhow, as this was the supported driver from Lenovo. In addition, the Intel Graphics Control Panel (that installed with the driver) fails to come up as well. Is this a known problem? Is there anything else to try? How do I determine exactly which version of Intel HD Graphics I have (there seems to be many versions listed on Intel web site).

cdsmith22 wrote:
Update: I've not had stability when using the Windows 8.1 driver on my Yoga 2 Pro running Windows 10. The Intel HD Graphics Family driver shows "Working Properly" after first reverting back to the Windows 8.1 driver and the Micro-HDMI port works initially. At some point though, I end up with the device showing disabled and I'm also having Audio issues. I decided to upgrade the BIOS which went OK (upgraded from Kona BIOS Version 76CN31WW to Version 76CN43WW). Then I re-installed the Windows 10 Intel HD Graphics Family driver from the Lenovo website (Version 10.18.15.2040 showing a data of 7/15/15 on the website but 6/16//15 once installed). However, the driver shows disabled as not working properly so I'm not happy. I'll continue to consider purchasing a support option but figure it'll only reap an apology and perhaps some information confirming the problem but I expect paying for support won't result in a working Windows 10 driver any sooner. I'm not aware how to report a problem like this to Lenovo without paying them to hear about the trouble they're causing me.Let me stop you from wasting your money. I too had the problem you described. What I made sure of was that once I installed that 8.1 driver, and in my case, the one dated March 2014, I went into Windows Update and disabled automatic updates. That is where it kept getting updated for me. That was a week ago and still have stability using the old driver. Hope this helps. Intel needs to make a stable Windows 01 driver like yesterday.

[SOLVED][KDE, intel] Screen goes gray when switching windows

Hello,
on my EEE netbook, since the xorg update, I guess --noticed today, as I use it for school only --, the screen goes gray after I switch windows via alt+tab. This does not happen every time, but eventually it occures. In that case the whole screen has color of not yet painted window, and the DE is seemingly not responding to anything, I can still move my mose though and cursor moves too. Switching to text console works, but xserver restart is needed to get things back to normal.
I have been using graphics system raster, but change to default didn't solved the issue. The same goes for -lcd font filters. System is up-to-date and uses some SELinux packages from the AUR if that matters, but it should not, as they are not graphics nor DE related.
Would you have any sugestions? I should not be doing any potentially risky operations till thursday, as I need the computer for school and don't have any other available.
Thank you.
Will happily provide additional information, if you specify it.
EDIT: The situation is simmilar as when I run a program, first a fullscreen window is painted gray, and when everything is loaded its content is painted. This lasts few second in case of big applications like Kontact. In the case of mentioned bug it is like the content of window never painted.
EDIT: So I recompiled bespin-svn, as I remembered, that this package likes to cause trobles, when it is older, and I wanted to mark this solved, as it behaved during the day, but just few minutes ago, the problem happend again.
EDIT: I don't understand it. On monday it happed several times during day. On tuesday it happend once. Since wednesday it didn't happend. Sould I start to beleave in ghosts?
Last edited by Nicky726 (2010-12-09 16:02:37)

Ok, happend again several times today. Didn't happen at any other PC, but I do not have other Intel based, in case it is graphics related.
As for log (not like I have an idea what to look for) I have error loading fbdev module and some touchpad errors in xorg.log (not imediatelly after the problem), and some Networkmanager warnings.
Damn. Now I failed three times in a row to switch from konsole to rekonq in order to copy those logs. Anyway this is tail -n 50 everything.log (right now X11 screen is just gray and mouse cursor). SELinux can be ignored as it is set permissive.
Oct 13 20:39:46 localhost kernel: ata3.00: configured for UDMA/133
Oct 13 20:39:46 localhost kernel: ata3: EH complete
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-3): re-mounted. Opts: commit=0
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-5): re-mounted. Opts: commit=0
Oct 13 20:39:46 localhost kernel: type=1400 audit(1286995186.522:24): avc: denied { execstack } for pid=16129 comm="ksmserver" scontext=user_u:user_r:insmod_t tcontext=user_u:user_r:insmod_t tclass=process
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-2): re-mounted. Opts: commit=0
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-4): re-mounted. Opts: commit=0
Oct 13 20:39:47 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:39:47 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:39:53 localhost kernel: composite sync not supported
Oct 13 20:39:54 localhost kernel: SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
Oct 13 20:39:54 localhost kernel: type=1401 audit(1286995194.036:25): security_compute_sid: invalid context user_u:user_r:mount_t for scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:mount_exec_t tclass=process
Oct 13 20:39:54 localhost kernel: type=1400 audit(1286995194.036:26): avc: denied { read write } for pid=16308 comm="mount" path="socket:[1171927]" dev=sockfs ino=1171927 scontext=user_u:user_r:mount_t tcontext=user_u:user_r:insmod_t tclass=unix_stream_socket
Oct 13 20:39:54 localhost kernel: type=1400 audit(1286995194.036:27): avc: denied { read write } for pid=16308 comm="mount" path="/dev/fuse" dev=devtmpfs ino=4086 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:fuse_device_t tclass=chr_file
Oct 13 20:39:54 localhost kernel: type=1400 audit(1286995194.039:28): avc: denied { append } for pid=16308 comm="mount" name="mtab" dev=dm-3 ino=37749 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:etc_t tclass=file
Oct 13 20:39:56 localhost kernel: type=1400 audit(1286995196.412:29): avc: denied { execmod } for pid=16256 comm="knotify4" path="/usr/lib/codecs/drvc.so" dev=dm-3 ino=828208 scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:lib_t tclass=file
Oct 13 20:39:59 localhost kernel: type=1400 audit(1286995199.259:30): avc: denied { execmod } for pid=16256 comm="knotify4" path="/usr/lib/libx264.so.104" dev=dm-3 ino=16190 scontext=user_u:user_r:insmod_t tcontext=user_u:object_r:lib_t tclass=file
Oct 13 20:42:02 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:42:02 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:42:02 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
Oct 13 20:43:09 localhost kernel: type=1401 audit(1286995389.304:31): security_compute_sid: invalid context user_u:user_r:mount_t for scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:mount_exec_t tclass=process
Oct 13 20:43:12 localhost kdm[3254]: X server for display :0 terminated unexpectedly
Oct 13 20:43:12 localhost acpid: client 15799[0:0] has disconnected
Oct 13 20:43:12 localhost acpid: client connected from 20364[0:0]
Oct 13 20:43:12 localhost acpid: 1 client rule loaded
Oct 13 20:43:13 localhost kernel: composite sync not supported
Oct 13 20:43:13 localhost kernel: composite sync not supported
Oct 13 20:43:20 localhost kernel: ata3.00: configured for UDMA/133
Oct 13 20:43:20 localhost kernel: ata3: EH complete
Oct 13 20:43:20 localhost kernel: EXT4-fs (dm-3): re-mounted. Opts: commit=0
Oct 13 20:43:21 localhost kernel: EXT4-fs (dm-5): re-mounted. Opts: commit=0
Oct 13 20:43:21 localhost kernel: EXT4-fs (dm-2): re-mounted. Opts: commit=0
Oct 13 20:43:22 localhost kernel: EXT4-fs (dm-4): re-mounted. Opts: commit=0
Oct 13 20:43:22 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:43:22 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:43:24 localhost kernel: SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
Oct 13 20:43:24 localhost kernel: type=1401 audit(1286995404.994:32): security_compute_sid: invalid context user_u:user_r:mount_t for scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:mount_exec_t tclass=process
Oct 13 20:43:25 localhost kernel: type=1400 audit(1286995405.008:33): avc: denied { write } for pid=20701 comm="mount" name="mtab" dev=dm-3 ino=37746 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:etc_t tclass=file
Oct 13 20:43:25 localhost kernel: type=1400 audit(1286995405.008:34): avc: denied { append } for pid=20701 comm="mount" name="mtab" dev=dm-3 ino=37746 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:etc_t tclass=file
Oct 13 20:43:25 localhost kernel: composite sync not supported
Oct 13 20:44:32 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:44:32 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:44:32 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
Oct 13 20:45:44 localhost ntpd[22509]: skew change 53.711 exceeds limit
Oct 13 20:47:02 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:47:02 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:47:02 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
Oct 13 20:49:32 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:49:32 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:49:32 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
This should cover the time of at least one of the failures. Can somebody see something in it?
Last edited by Nicky726 (2010-10-13 18:58:16)

I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

Imac 27" Intel Core7 CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

Animations are subdued but the white screens, neon colors and lack of black boarders are still making my eyes feel strained. What's to do about these issues? Oh and calander is still a disaster.

The zooming animations made me overwhelmed with motion sickness and I thank apple for handling that issue. Unfortunately there are still many visual issues that strain my eyes and make my iPhone unpleasant to use. The bright neon colors are childish and unnecessary, the lack of black boarders around icons etc make the eyes work harder to define content on the iPhone, the overuse of white screens and keyboard exhaust the eye, and the calendar is so inefficient and has been rendered useless to me. What about all of those issues? Notes is blinding and I don't use that anymore. I've stopped using calendar which is VITAL to my modern existence. The zooming is gone but all these other factors have still ruined the iPhone for me and I've been using iPhone from the first month it was put on the market. I used to LOVE my iPhone and I was down right snobby about it. Now I am dispassionate about iPhone and Apple and honestly heartbroken by the device IOS 7 turned my beloved into. Sure, there are some cute new tricks but the overall IOS 7 experience is still ruining my iPhone for me. What's to be done about these other issues?! I

Overall, no you can't change iOS 7. There are a number of thrid party calendar apps available in the app store however. You might explore some of those.

I get a 3914 error when I try and restore my iphone 4. my screen goes white and then all different colors. what should I do?

i get a 3914 error when i try and restore my iphone 4. my screen goes white and all different colors what should i do

first try a different usb cable, remove all other usb devices, and try a different port in back on desktops if possible. if no luck see these
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

IMAC 20" intel - System freezes and screen goes blue - why??

this just started yesterday - I did not add any programs or update any software recently. I have since added Norton and scanned for viruses.
PROBLEM: my system freezes and the screen goes blue. It does not "wake" back up right away and after it goes blue a few times, it stays blue and I have to hard boot. If I leave the system off for about an hour, I'll get a few hours out of it before this happens.
DIAG: As stated above, I checked for viruses. I also ran all available diagnostics, and am fresh out of new ideas. Since I can't open my iMac without voiding the warrantee, I can't check for any possible burst or bulging capacitors. I disconnected all perperials and still have the same issue.
HYPOTHESIS: I am heavily leaning toward a hardware problem, but before I take the trip to the Apple store, I wanted to reach out to the forum to see if anyone else has had this problem?
This is an early 2006 Intel based 20" iMac that I have been running (24x7) since late August 2006. I never had an issue with my first iMac (pre-Intel).
HELP!!!
intel IMAC 20" Mac OS X (10.4.8)
intel IMAC 20" Mac OS X (10.4.8)

wrong forum - you should post here:
http://discussions.apple.com/forum.jspa?forumID=1110
max

Screen goes to neon colors in Intel HD Graphics control panel

Similar Messages

Maybe you are looking for