Screen has zoomed in and wont go out again

my ipod touch has suddenly decided to zoom in really far and wont go back out again therefore cant really use any of the apps and is generally more difficult to use.
please help

It sounds like the Accessibility feature Zoom has been turn on. To reduce the zoom double click the screen with three fingers. To turn off zoom go to Settings > General > Accessibility and turn Zoom off.

Similar Messages

  • We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years) and the screens has gone black and wont turn on.  Phone is charged. We have tried force quit- home screen and top button. help pls

    We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on.  Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer.  help pls

    FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.

  • Screen has zoomed in and will not zoom out

    Suddenly my screen has zoomed itself in to max zoom and the screen no longer responds to my touches to zoom it back out. I can manage to make the screen wiggle a little left or right, but not up or down. I tried to manually reset the phone (sleep/home button pressed for 10 seconds) and now the unlock screen is zoomed in so far I cannot access the 'slide to unlock' feature. This is a "4" and is about two weeks old.
    How can I get my screen zoomed back out so I can at least unlock the phone to answer calls?

    iphone frozen in a mega zoomed state?
    Same thing happened to my iphone 4. I could not unlock or even see any portion of the screen except the last number in the time, and it was about the size of the full screen!
    If the three finger double tap is not working for you like it did not work for me,
    Try this...
    1.)perform a hard reset--hold the home button and the sleep button (bottom and top buttons) until you see a silver apple.
    2.)wait till the screen comes back to life and see if is working again, if not connect your iphone to your computer and itunes.
    3.)right click on the name of the iphone and select "transfer purchases"
    4.)once transfered click the restore button in itunes
    5.)chose back up
    6.)once it is restored and it asks to restore as new or restore from back up JUST DISCONNECT YOUR IPHONE by ejecting it normally
    7.)Check to see if your screen is unfrozen and back to working use, this will show if you had a software problem or a content problem. If it doesn't work it is most likely a hardware problem and you need to take the iphone to a apple retailer for repair, I was told by a rep from apple it would be free.
    8.)if it does work normally simply plug it back into itunes and click restore from back up.
    This worked for me when no other solution worked, and it was fairly simple just took about 30 minutes to complete.
    Good Luck!
    null

  • My Iphone 5(purchased in Jan 2013) has suddenly developed a multicolored hue in the center of the **** screen. it looks pathetic and totally whacked out. Its rainy and humid where I stay this time of the year. Apple guys are you reading this?

    my Iphone 5(purchased in Jan 2013) has suddenly developed a multicolored hue in the center of the **** screen. it looks pathetic and totally whacked out. Its rainy and humid where I stay this time of the year. Apple guys are you reading this? does the management go through this website.? Hey Apple guys, can you replace my phone for me.Its so slippery and slides out very easily from my hands. I have owned smartphones before but yours is a real slimy slider. so while I was shooting pics in varanasi in march it fell out of my palm (it was drizzling) and the rear screen (the section next to the camera) kinda cracked real ugly and obviously due to this the camera is behaving kinda crazy too. can you guys help me out here.?

    If your phone is defective (aside from the accidental damage) Apple will fix or replace the phone. You saud you purchased the phone in January so it is still under warranty. 
    If you have an Apple Store in your area, make a Genius Bar appointment.
    If not, Contact Apple Service Center:
    http://support.apple.com/kb/index?page=servicefaq&product=iphone

  • My iphone has a blank screen no apple logo and wont turn on. my computer wont pick it up either, what is going on?, my iphone has a blank screen no apple logo and wont turn on. my computer wont pick it up either, what is going on?

    my iphone has a blank screen no apple logo and wont turn on. my computer wont pick it up either, what is going on?, my iphone has a blank screen no apple logo and wont turn on. my computer wont pick it up either, what is going on?

    You repeat yourself frequently frequently.  Perhaps your iPhone is not charged.
    Too, you might look in the section "More Like This", right over here  ----->

  • IPhone home screen is zoomed in and will not zoom out. How do I get it back to normal?

    My iPhone 6 home screen is zoomed in and will not return to normal, How do I get it back to normal?

    If that did not work, then try triple-tapping the home button. If that does not work, then double-tap 3 fingers and hold on the screen, dragging to change the zoom level. If you need to move the screen around to be able to access something to get the device unlocked, then use 3 fingers to drag the screen around after trying to change the zoom level.

  • My iPod Touch 4G's screen has gone white and has lines on the screen. How do I fix it? Help!

    Hello everyone,
    I've had an iPod Touch 4th generation for a few years now, and, today, for the first time, the screen has gone white and their are vertical lines on it. What happened was I accidentally dropped my iPod Touch on tile and it landed on its back. I tried it out right afterwards to see if it was still working and it seemed like it was perfectly fine. Later on, I got an email from one of my friends, so I slid the email button on the lock screen to see the email. In the email, there was a link to a gif image, so I opened it in Safari. After I was done with it, I closed that tab. I also had a second tab open from earlier, so I wanted to close that tab as well. When I clicked on the button to see all tabs and close one, the screen completely froze. I held on to the on/off button on the top of the iPod, and, after about a minute, the screen switched to a completely white screen with lines on it. I've tried holding onto the on/off button again and it doesn't work. I also tried plugging it into my Windows 7 computer and opening iTunes, but my computer doesn't even recognized it is plugged in. It won't appear under the "computer" section in Windows Explorer, which will allow me to do USB-related tasks with it. iTunes doesn't recognize that it is plugged in either, so I can't do anything like restore the iPod to factory settings. The home button on my iPod hasn't been working for a while so i've always been using the accessibility feature that gives me a home button on the screen. Now that I can't access that, I can't hold down both the on/off button and the home button at the same time. What should I do? Should I send it in to Apple for repairs (which I won't do and would rather buy a new iPod Touch)? I am thinking of just leaving it to, hopefully, have the battery drain and the iPod would die. Then, I could charge it and see what happens. Other than that, i'm just clueless right now and I have no idea what I should do. Please help me!
    My iPod Touch is an iPod Touch 4th generation model with 8GB. It is running iOS 5.1.1.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My ipod screen has turned white and I can't read it

    Ipod Nano screen has turned white and I can't read it

    Hello Redcoupe7
    Check out the article below and pick the iPod that you have to go over some troubleshooting options. If it does not work, there are options for additional assistance to assist you further.
    iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Regards,
    -Norm G. 

  • Ipod mini screen has gone dark, and when backlight goes on v

    Ipod mini screen has gone dark, and when backlight goes on the centre part with writing etc is almost black with light around edge. will this go? do i need to send it back?

    Maybe your backlight is burning out? That's what I would think when the center is black but the edges have light. I'm not sure if a reset would fix the backlight but you can try (hold the menu and center buttons at the same time until you see the Apple logo and then release). If I were I'd send it back to Apple but do you know if you are still under warranty? You should be if you've had your iPod less than a year.

  • Daughter locked screen in zoom mode and can't login!

    My 14month old got hold of my iPhone4 and locked the screen in zoom mode and it won't move. I can't put my password in to login and the reset didn't work. Very frustrating! Please help!

    Double tap with threee fingers to zoom out.  The go into Accessibility and turn it off for good.

  • HT201269 my iphone 5 has been destroyed and wont work or even charge but i was wondering how i could get the pictures and videos off of it to my iphone 4?

    my iphone 5 has been destroyed and wont work or even charge but i was wondering how i could get the pictures and videos off of it to my iphone 4?

    Connect the 5 to a computer and see if it is recognized. If so copy the pictures from phone. If not, you are out of luck.

  • I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black.  My printer guy has been in and checked it out top to bottom and that part is fine.  I have tried to print the same docum

    I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black.  My printer guy has been in and checked it out top to bottom and that part is fine.  I have tried to print the same document and it comes out fine.  Any ideas ?   Using Windows 7 Service Pack 1

    Sorry my bad.  I have tried to print the same document on another printer and all the formatting is fine. 

  • Portege Z830 - screen has been broken and I need to replace it

    Hi
    I have Toshiba Portege z830. My screen has been broken and I need to replace it.
    Is it possible to install some IPS screen instead of original LTN133AT25-601? Which IPS screen is compatible with LTN133AT25-601?

    Hi
    The original LCD which was used in Z830 was an 13.3"(HD) 1366 x 768 TFT Color LCD.
    So if you want to use other display, then you should pay attention to the screen size and the connectors.
    I think these are most important key elements.

  • My iphone 5 has just had an update for candy crush and ever since i opened it the screen has been black and I can't get it to do anything what can I do?

    My iphone 5 has just had an update for candy crush and ever since i opened it the screen has been black and I can't get it to do anything what can I do?

    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)  Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Delete the App, then reinstall it.
    Test the issue after each step.  Make sure to quit the app as described before each followup step.

  • My Kids we on my 24 in iMac.  Now the screen is "Zoomed in" and I can get it to go back to nomal for an application/desktop etc.  The monitor is set at correct resolution.  Help!

    My Kids were on my 24 in iMac.  Now the screen is "Zoomed in" and I can't get it to go back to normal.  Tried resetting resolution, rebooting in safe mode.
    Help!
    Thanks.

    Tap the top of the mouse with two fingers.
    To turn off this feature, Un check the "smart Zoom" box

Maybe you are looking for

  • RE: Video Output to TV Monitor

    Hi people. Im using logic express 7, mostly for audio only but now I need to edit the audio of a short film. I have a canopus advc 100, but could not find where in song settings is the option to play the video to it. So I was wondering if logic expre

  • PHP + MYSQL + DW

    Hi Folks: I am trying to connect to the database and keep getting a 500 internal server error. here is the setup Database server -- mysql 4.1 (linux) on a gentoo linux server -- IP 192.168.0.10 -- srvdb-01 Webserver - Apache2 + PHP 5 on Gentoo Linux

  • Still freezing (!)

    http://discussions.apple.com/thread.jspa?threadID=2294629&tstart=195 I posted a thread a few weeks ago, explaining the issue I was having with my macbook pro 15". The computer would freeze, for a stretch, almost once each day, while I was simultaneou

  • Restict to subject area

    Hi OBIEE Experts, I come to back new requirement in obiee 10g, Kindly share me your valuable inputs. I have three subject areas likes , A,B,C. A and B both are Adhoc reports But C Static reports. All users try to open static subject area , we need to

  • Dynamically call DBMS_XMLINDEX to drop parameter and exit with exception

    Hi All, I am trying to create a procedure to dynamically call DBMS_XMLINDEX.dropparameter. If the parameter does not exist then gracefully exit with exception as 'Parameter does not exist'. But I keep on getting errors due to dynamically passing. Pro