Screen help
How do I make my screen light up when my phone gets a call or messege
Screen are supposed to be automatically lighten up whenever a call is received!! Is it not happening for you? For SMS this will not happen.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit
Similar Messages
-
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
my iphone 3 when turned on shows a picture of the jack and an arrow pointing to Itunes. I can't get it off this screen. help!
Do what you are being told. Plug the phone into a computer running iTunes and restore the phone.
-
I need to fix my ipod and i don't know how, i am hoping that if i leave it alone over night that it will fix itself,
its on the lock screen and i cant do anything with the screen, i tried restarting it and it didnt work, so because i restarted it, it is not connected to wifi.
please help.
will getting a new screen help? or is there an easier, less expensive way?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch 8th 3rd gen is stuck on the connect to iTunes screen and won't let me do anything and iTunes won't restore it or do anything because there is a password on it and I can't type it in on the touch since it's stuck on this screen help please I've tried doin the power and menu button to restart it and it goes right back to connect to iTunes someone please helpme
Try again placing the iPod in recovery mode. It can be tricky. The computer should say it discovered an iPod in recovery mode. Recovery mode bypasses the passcode (and erases the iPod). If not successful, try placing the iPod in DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????
Might want to post your question in the correct forum. This is the iPHONE forum.
-
I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)
@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson -
Hi,
I would apprecite very much if somebody could explain me how to use a Screen Help component.
Thanks in advance.
AGThere is not much to the inline help component. It is just like a static text field with some style automatically applied. Here is what the Delving Into Components tutorial says (http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/about_components.html):
You use the Inline Help component to display short, help-type information on a page. Typically, you set the component's type property to field so that the help is in a smaller font and doesn't take up too much real estate. -
hi,
can anyone tell me about the following helps
1)what is screen help?
2)what is menu help?I'd try the DVD on your computer and in another DVD player/TV to see if it's a TV setting or an iDVD issue.
John -
The app store says I've downloaded facebook, but the icon is not on my screen - help!
I downloaded the facebook app from the app store, and it SAYS it is installed, but ther eis no icon on my home screen - help!
https://discussions.apple.com/thread/4055605
To fix your Facebook app:
Go to "Settings"
Select "General"
Go to "Usage"
Find "Facebook" in the list of apps installed
Swipe across "Facebook"
Press "Delete"
Reinstall "Facebook" -
Providing on-screen help in flash RIA application
Dear Friends,
I have a requirement to implement a feature like providing on-screen help related to the panel/control/form(which helps the use who is using my application) i loaded in the browser.
Any idea or any direction is appreciated.
Regards,
Prakash.Hi nikos,
Thanks for your reply. which file format i have to use so that the team who is creating help, can give me that file format. and i can access. usually .hlp file is using for standalone project. for web which file format is best to fetch help details.
The senario is, if i press F1 on textbox, it should give me a help from the help document and produce information about that field entry.
I am using flash builder to develop my application.
Please give me any idea..
Regards,
Prakash. -
my ipod was doing the latest update of ios (think it was 6) and it froze so i tried to reset it now all i get is a light blue screen. help please.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When i boot my cd to install mac ox a lock logo appers in the screen. help what will i do?
when i boot my cd to install mac ox a lock logo appers in the screen. help what will i do? macbook pro thanks for the help..
Provide the computer's firmware password and press Enter. If you don't know the password and can't turn firmware password protection off, contact Apple.
(79746) -
I replaced my 2010-2011 iMac internal HD i dont have an install disk i created one with my external HD but when i go to install lion onto my imac it stays at the apple logo screen.HELP ME PLEASE!
Boot from the original Install disc that came with the computer and then format the drive Mac OS Extended (Journaled) using the GUID partition. Then you can re-install OS X. If you no longer have the original media call AppleCare with the serial number of the machine (look on the bottom of the stand) and for a nominal fee they will ship you replacement media.
The chances are very good you will have fan problems if you used an off-the-shelf HD, beginning in 2009 Apple began using HD's from vendors that incorporated heat sensors into the HD. If you did not buy the same type of HD your computer will think the HD is overheating causing the fans to run at full speed. -
MacBook pro won't power up! Acting asleep, black screen, fans don't fire up. Light nr catch pulsing, have taken batt out and reset but still blank screen, help!!
You may want to try this.
Solution A
Start up your MBP while pressing Option (alt)|, Command, P, R until your hear 3 chimes rather than 2 as indicated by apple. This worked for me the first time.
Solution B
Start your MBP while pressing Option (alt), Command, S
Hold until you see the computer automatic routine. When it finally stops type the following followed by "return":
fsck -fy
It will probably indicate some problem related to "pcscd.pub" (should be 16 instead of 17). I haven't figured out what this means but somewhere in the Internet i read it is related to scan cards...
More importantly this routine will fix any problems with your HDD similarily to disk repair. When it ends, it will tell you if it has fixed/modified anything. If it has, run the routine again by typing again "fsck -fy"
Lastly, reboot by typing "reboot" (followed by "return")
Solution C
Start up your MBP while pressing option (alt), command, S
hold keys until you see computer commands scrolling
when the routine stops type the following, each line followed by the "return" key:
mount -uw /
chmod 775 /
chmod 1775 /
reboot
After which your computer should reboot on it's own.
Each of the above has worked for me at one time or another. Once your computer has rebooted from the DVD you can reinstall OS X. If your problems started after installing 10.5.6, then I don't suggest updating until 10.5.5.
I'm very very disappointed with my 2007 MBP, it started to give me problems after 1 year. had to change the HDD and lately when I isntalled 10.5.6 it suddenly refused to start up., My previous Mac laptop (2003 866Mhz) worked for 4 years without a hitch. Ironically I've had to use it to access the internet and find solutions for my current MBP.
best of luck -
My ipod touch 4g wont turn on its on a black screen help
can some one help me please i need this ipod
I TRIED TO TURN IT ON BUT IT NEVER TURN ON
AND ITS ON A BLACK SCREEN
HELP FOR GOD SAKETry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How can I implement this? I tried to use: (this.numChildren - 1) But it doesn't work. I want to use this code because I have 8 boxes, each are 100px X 100px. You hover each box and they flip over but the "backside" of these cards are larger in both l
-
Automate Firewire Target disc mode?
I'm thinking of getting a Mac Mini as a backup machine (both as a data back up and also in the sense that if the G5 blows up I'll have a machine to work on whilst it's repaired). In order for this to be effective, I want to automate backing up to the
-
Question: Keep getting "Renew Subscription" message
I purchased the Creative Cloud educator package, so I am charged monthly access for the entire year. I am able to open Photoshop just fine, but when I try to open Illustrator, I keep getting a pop-up that says, "Renew Your Subscription." I follow the
-
Migrating to 10g ( Using webutil )
Hello, I'm migrating a app from 4.5 to 10gr2, rigth now i'm replacing the source code from my pll, and deployng the webutil.pll, i replaced the several calls to text_io and host, with client_tex_io and client_host, should i do the same to win_api? Th
-
Properties panel, the Link listbox, pre-loading URL strings
Is there a way to customize the Link (URL) listbox, so that I could select from a better list of previously-used links, rather than entering or pasting or dragging a URL? The Link listbox seems to store URL strings only from the current DW session. I