Screen image moves when moving the mouse

I inadvertently changed either the mouse or expose settings last evening and now my screen is magnified so that some icons are off screen. If the mouse is moved the screen image jerks over to reveal the hidden areas in a horrible way. Does anyone have any idea how I can get things back to normal? AJ

You should be able to change the magic mouse's settings
and perhaps select to turn off some of the features which
have enabled the unwanted effects.
Since I have an older single-button Apple Pro black mouse
with the clear case and black/green circuit board inside, I
can understand the issues a newer design mouse brings.
Several multiple-button mouse products I've tried (not wi-fi)
were unsatisfactory due to the unwanted effects set into
motion by various accidental activations.
The Magic Mouse has a touch-surface, so you may have
to try and find out what settings have triggered the effects
you have no need for, & either change them, or turn them off.
The touch gestures sometimes activated by just trying to
use the sensor-laden top section of the Magic Mouse is
an area you may have to do some searches into; some
sites had discussed different matters regarding this item
and some topics include custom gestures. There may be
some kinds of custom software to modify the unit, too.
One site with a list of motions that produce more effects:
• "Add more gestures to your Magic Mouse"
http://stagingkiller.wordpress.com/2009/11/26/add-more-gestures-to-your-magic-mo use/
{There probably are some other sites with helpful hints
about how to disable some of the existing ones. The
control settings in System Preferences may be a start.}
• MagicPrefs is a must download for Magic Mouse owners (freeware)
http://www.tuaw.com/2009/12/31/magicprefs-is-a-must-download-for-magic-mouse-own ers/
Other preference selection software to control gestures can be read
about in this linked web page with some comparison products:
http://www.geeksology.com/how-to-add-additional-gestures-to-apples-magic-mouse/
Sorry to not be as much help as initially thought; and
hopefully some other answers will be forthcoming.
Good luck & happy computing!

Similar Messages

  • HT1436 My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

    My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

    Great clue Lukas...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • FM9 crashing when moving the mouse to the pods

    Hi,
    I've FM9 (on XP SP3) frequently crash when moving the mouse cursor over one of the hidden "pods" in the lower side of the window (Conditional Text, to be precise).
    I've sent Adobe several of the crash logs, but it seems there is no update fixing this issue.
    Is someone else having this problem? I feel I alread asked this in this forum, but I can no longer find the thread.
    Paolo

    Paolo, just to be clear, "undocking" the pods by moving them away from your work area is different from actually "de-podding" -- which means stopping the pod from being displayed  -- by changing your workspace settings.
    There are some instructions about creating a custom workspace, in which you can stop the pods from being displayed or being "active" even when they are being minimizd, here:
    Workspaces in FrameMaker 9
    Adobe Forums: Steps to "de-pod" workspaces in FM 9

  • Xorg hangs and is unkillable, but only when moving the mouse

    Hello everyone!
    I have a special problem related to Xorg, my graphics card and my mouse, as it seems.
    My Setup
    I have the following setup:
    Archlinux 3.6.2-1-ARCH i686 (everything should be pretty much up-to-date)
    Motherboard: Abit BH6 (quite old though)
    2 Video Adapters: One 3Dfx Voodoo 3 (rev 01), PCI at 0:f:0 and an ATI Rage 128, AGP at 1:0:0
    Standard Microsoft PS/2 Mouse (has been working fine ever since I bought it around 2001!)
    Edit: (forgot to mention)
    My BIOS is set up to use the AGP Card to Boot, VGA BIOS Caching, Shadowing and Video RAM Shadowing are disabled alltogether.
    End Edit
    I installed Xorg as described in https://wiki.archlinux.org/index.php/Xorg. (Please find the contents of my /etc/X11/xorg.conf.d/10-configuration.conf below)
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "Dac6Bit" # [<bool>]
    #Option "Dac8Bit" # [<bool>]
    #Option "DMAForXv" # [<bool>]
    #Option "ForcePCIMode" # [<bool>]
    #Option "CCEPIOMode" # [<bool>]
    #Option "CCENoSecurity" # [<bool>]
    #Option "CCEusecTimeout" # <i>
    #Option "AGPMode" # <i>
    #Option "AGPSize" # <i>
    #Option "RingSize" # <i>
    #Option "BufferSize" # <i>
    #Option "EnablePageFlip" # [<bool>]
    #Option "Display" # <str>
    #Option "PanelWidth" # <i>
    #Option "PanelHeight" # <i>
    #Option "ProgramFPRegs" # [<bool>]
    #Option "UseFBDev" # [<bool>]
    #Option "VideoKey" # <i>
    #Option "ShowCache" # [<bool>]
    #Option "VGAAccess" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "RenderAccel" # [<bool>]
    Identifier "Card0"
    Driver "r128"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "UsePIO" # [<bool>]
    #Option "ShowCache" # [<bool>]
    #Option "VideoKey" # <i>
    #Option "NoSLI" # [<bool>]
    #Option "TexturedVideo" # [<bool>]
    #Option "DRI" # [<bool>]
    Identifier "Card1"
    Driver "tdfx"
    BusID "PCI:0:15:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    How to reproduce the problem
    I initially had twm installed but now I have gdm, both of which (seem to) show the exact same behavior, when doing the following:
    Start Xorg using xinit (or even startx, doesn't make a difference)
    Start your dm, for example:
    gdm dbus-launch gnome-control-center
    Move your mouse around a bit, try to login, anything will do, and wait for it to hang up - it never takes longer than a Minute
    After that, killing X using signal 15 or 9 won't work, I have to restart my computer to get another try.
    The last lines of dmesg are:
    [ 1550.681449] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
    [ 1550.715635] EXT4-fs (sdb1): re-mounted. Opts: data=ordered,commit=0
    [ 1800.843311] INFO: task X:297 blocked for more than 120 seconds.
    [ 1800.843333] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 1800.843345] X D 016bde74 0 297 296 0x00400000
    [ 1800.843368] d26bded0 00000082 0826cde0 016bde74 00000000 c060c220 c06dd6c0 c06dd6c0
    [ 1800.843401] 9c9af169 0000017e d3a826c0 d26a1f20 00000000 00000000 00000000 00000003
    [ 1800.843431] d26bdeb0 00000000 d26bdec0 d2ecc136 00000000 00000000 d26bdec4 c02f39af
    [ 1800.843462] Call Trace:
    [ 1800.843517] [<c02f39af>] ? string.isra.4+0x2f/0xa0
    [ 1800.843545] [<c04d0fc3>] schedule+0x23/0x60
    [ 1800.843576] [<c039a077>] vga_get+0xe7/0x150
    [ 1800.843616] [<c016af00>] ? try_to_wake_up+0x240/0x240
    [ 1800.843637] [<c039a31e>] vga_arb_write+0x8e/0x4e0
    [ 1800.843667] [<c02abe34>] ? security_file_permission+0x24/0xb0
    [ 1800.843703] [<c02337c3>] ? rw_verify_area+0x63/0x110
    [ 1800.843723] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 1800.843743] [<c0233b48>] vfs_write+0x88/0x160
    [ 1800.843762] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 1800.843783] [<c0233e3d>] sys_write+0x3d/0x80
    [ 1800.843808] [<c04d7e1f>] sysenter_do_call+0x12/0x28
    [ 1800.843828] INFO: task Xorg:439 blocked for more than 120 seconds.
    [ 1800.843837] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 1800.843846] Xorg D 01cebe74 0 439 438 0x00400000
    [ 1800.843865] d1cebed0 00003082 bf8b2890 01cebe74 00000000 d1cf8000 c06dd6c0 c06dd6c0
    [ 1800.843896] 00000000 00000176 d3a826c0 d2156450 00004000 00000000 00000000 d1cebea4
    [ 1800.843926] c014b8e5 00000000 d1cebec0 d2ecc4b6 00000000 00000000 d1cebec4 c02f39af
    [ 1800.843957] Call Trace:
    [ 1800.843992] [<c014b8e5>] ? __set_task_blocked+0x35/0x80
    [ 1800.844016] [<c02f39af>] ? string.isra.4+0x2f/0xa0
    [ 1800.844037] [<c04d0fc3>] schedule+0x23/0x60
    [ 1800.844057] [<c039a077>] vga_get+0xe7/0x150
    [ 1800.844082] [<c016af00>] ? try_to_wake_up+0x240/0x240
    [ 1800.844102] [<c039a31e>] vga_arb_write+0x8e/0x4e0
    [ 1800.844124] [<c02abe34>] ? security_file_permission+0x24/0xb0
    [ 1800.844147] [<c02337c3>] ? rw_verify_area+0x63/0x110
    [ 1800.844167] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 1800.844188] [<c0233b48>] vfs_write+0x88/0x160
    [ 1800.844207] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 1800.844228] [<c0233e3d>] sys_write+0x3d/0x80
    [ 1800.844248] [<c04d7e1f>] sysenter_do_call+0x12/0x28
    [ 1920.843300] INFO: task X:297 blocked for more than 120 seconds.
    [ 1920.843321] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 1920.843333] X D 016bde74 0 297 296 0x00400000
    [ 1920.843356] d26bded0 00000082 0826cde0 016bde74 00000000 c060c220 c06dd6c0 c06dd6c0
    [ 1920.843389] 9c9af169 0000017e d3a826c0 d26a1f20 00000000 00000000 00000000 00000003
    [ 1920.843419] d26bdeb0 00000000 d26bdec0 d2ecc136 00000000 00000000 d26bdec4 c02f39af
    [ 1920.843450] Call Trace:
    [ 1920.843503] [<c02f39af>] ? string.isra.4+0x2f/0xa0
    [ 1920.843530] [<c04d0fc3>] schedule+0x23/0x60
    [ 1920.843561] [<c039a077>] vga_get+0xe7/0x150
    [ 1920.843600] [<c016af00>] ? try_to_wake_up+0x240/0x240
    [ 1920.843620] [<c039a31e>] vga_arb_write+0x8e/0x4e0
    [ 1920.843650] [<c02abe34>] ? security_file_permission+0x24/0xb0
    [ 1920.843685] [<c02337c3>] ? rw_verify_area+0x63/0x110
    [ 1920.843705] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 1920.843726] [<c0233b48>] vfs_write+0x88/0x160
    [ 1920.843745] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 1920.843765] [<c0233e3d>] sys_write+0x3d/0x80
    [ 1920.843789] [<c04d7e1f>] sysenter_do_call+0x12/0x28
    [ 1920.843812] INFO: task Xorg:439 blocked for more than 120 seconds.
    [ 1920.843821] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 1920.843830] Xorg D 01cebe74 0 439 438 0x00400000
    [ 1920.843849] d1cebed0 00003082 bf8b2890 01cebe74 00000000 d1cf8000 c06dd6c0 c06dd6c0
    [ 1920.843880] 00000000 00000176 d3a826c0 d2156450 00004000 00000000 00000000 d1cebea4
    [ 1920.843910] c014b8e5 00000000 d1cebec0 d2ecc4b6 00000000 00000000 d1cebec4 c02f39af
    [ 1920.843941] Call Trace:
    [ 1920.843975] [<c014b8e5>] ? __set_task_blocked+0x35/0x80
    [ 1920.844000] [<c02f39af>] ? string.isra.4+0x2f/0xa0
    [ 1920.844021] [<c04d0fc3>] schedule+0x23/0x60
    [ 1920.844042] [<c039a077>] vga_get+0xe7/0x150
    [ 1920.844066] [<c016af00>] ? try_to_wake_up+0x240/0x240
    [ 1920.844086] [<c039a31e>] vga_arb_write+0x8e/0x4e0
    [ 1920.844108] [<c02abe34>] ? security_file_permission+0x24/0xb0
    [ 1920.844132] [<c02337c3>] ? rw_verify_area+0x63/0x110
    [ 1920.844151] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 1920.844171] [<c0233b48>] vfs_write+0x88/0x160
    [ 1920.844191] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 1920.844211] [<c0233e3d>] sys_write+0x3d/0x80
    [ 1920.844232] [<c04d7e1f>] sysenter_do_call+0x12/0x28
    [ 2040.843288] INFO: task X:297 blocked for more than 120 seconds.
    [ 2040.843308] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 2040.843319] X D 016bde74 0 297 296 0x00400000
    [ 2040.843341] d26bded0 00000082 0826cde0 016bde74 00000000 c060c220 c06dd6c0 c06dd6c0
    [ 2040.843374] 9c9af169 0000017e d3a826c0 d26a1f20 00000000 00000000 00000000 00000003
    [ 2040.843404] d26bdeb0 00000000 d26bdec0 d2ecc136 00000000 00000000 d26bdec4 c02f39af
    [ 2040.843435] Call Trace:
    [ 2040.843489] [<c02f39af>] ? string.isra.4+0x2f/0xa0
    [ 2040.843515] [<c04d0fc3>] schedule+0x23/0x60
    [ 2040.843544] [<c039a077>] vga_get+0xe7/0x150
    [ 2040.843581] [<c016af00>] ? try_to_wake_up+0x240/0x240
    [ 2040.843601] [<c039a31e>] vga_arb_write+0x8e/0x4e0
    [ 2040.843630] [<c02abe34>] ? security_file_permission+0x24/0xb0
    [ 2040.843665] [<c02337c3>] ? rw_verify_area+0x63/0x110
    [ 2040.843684] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2040.843705] [<c0233b48>] vfs_write+0x88/0x160
    [ 2040.843724] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2040.843745] [<c0233e3d>] sys_write+0x3d/0x80
    [ 2040.843768] [<c04d7e1f>] sysenter_do_call+0x12/0x28
    [ 2040.843790] INFO: task Xorg:439 blocked for more than 120 seconds.
    [ 2040.843799] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 2040.843808] Xorg D 01cebe74 0 439 438 0x00400000
    [ 2040.843827] d1cebed0 00003082 bf8b2890 01cebe74 00000000 d1cf8000 c06dd6c0 c06dd6c0
    [ 2040.843858] 00000000 00000176 d3a826c0 d2156450 00004000 00000000 00000000 d1cebea4
    [ 2040.843888] c014b8e5 00000000 d1cebec0 d2ecc4b6 00000000 00000000 d1cebec4 c02f39af
    [ 2040.843919] Call Trace:
    [ 2040.843953] [<c014b8e5>] ? __set_task_blocked+0x35/0x80
    [ 2040.843977] [<c02f39af>] ? string.isra.4+0x2f/0xa0
    [ 2040.843997] [<c04d0fc3>] schedule+0x23/0x60
    [ 2040.844018] [<c039a077>] vga_get+0xe7/0x150
    [ 2040.844043] [<c016af00>] ? try_to_wake_up+0x240/0x240
    [ 2040.844063] [<c039a31e>] vga_arb_write+0x8e/0x4e0
    [ 2040.844085] [<c02abe34>] ? security_file_permission+0x24/0xb0
    [ 2040.844109] [<c02337c3>] ? rw_verify_area+0x63/0x110
    [ 2040.844129] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2040.844149] [<c0233b48>] vfs_write+0x88/0x160
    [ 2040.844168] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2040.844188] [<c0233e3d>] sys_write+0x3d/0x80
    [ 2040.844209] [<c04d7e1f>] sysenter_do_call+0x12/0x28
    [ 2160.843271] INFO: task X:297 blocked for more than 120 seconds.
    [ 2160.843291] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 2160.843302] X D 016bde74 0 297 296 0x00400000
    [ 2160.843326] d26bded0 00000082 0826cde0 016bde74 00000000 c060c220 c06dd6c0 c06dd6c0
    [ 2160.843359] 9c9af169 0000017e d3a826c0 d26a1f20 00000000 00000000 00000000 00000003
    [ 2160.843389] d26bdeb0 00000000 d26bdec0 d2ecc136 00000000 00000000 d26bdec4 c02f39af
    [ 2160.843419] Call Trace:
    [ 2160.843473] [<c02f39af>] ? string.isra.4+0x2f/0xa0
    [ 2160.843499] [<c04d0fc3>] schedule+0x23/0x60
    [ 2160.843529] [<c039a077>] vga_get+0xe7/0x150
    [ 2160.843567] [<c016af00>] ? try_to_wake_up+0x240/0x240
    [ 2160.843587] [<c039a31e>] vga_arb_write+0x8e/0x4e0
    [ 2160.843615] [<c02abe34>] ? security_file_permission+0x24/0xb0
    [ 2160.843650] [<c02337c3>] ? rw_verify_area+0x63/0x110
    [ 2160.843670] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2160.843690] [<c0233b48>] vfs_write+0x88/0x160
    [ 2160.843710] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2160.843730] [<c0233e3d>] sys_write+0x3d/0x80
    [ 2160.843753] [<c04d7e1f>] sysenter_do_call+0x12/0x28
    [ 2160.843774] INFO: task Xorg:439 blocked for more than 120 seconds.
    [ 2160.843783] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 2160.843793] Xorg D 01cebe74 0 439 438 0x00400000
    [ 2160.843812] d1cebed0 00003082 bf8b2890 01cebe74 00000000 d1cf8000 c06dd6c0 c06dd6c0
    [ 2160.843843] 00000000 00000176 d3a826c0 d2156450 00004000 00000000 00000000 d1cebea4
    [ 2160.843873] c014b8e5 00000000 d1cebec0 d2ecc4b6 00000000 00000000 d1cebec4 c02f39af
    [ 2160.843903] Call Trace:
    [ 2160.843938] [<c014b8e5>] ? __set_task_blocked+0x35/0x80
    [ 2160.843963] [<c02f39af>] ? string.isra.4+0x2f/0xa0
    [ 2160.843983] [<c04d0fc3>] schedule+0x23/0x60
    [ 2160.844003] [<c039a077>] vga_get+0xe7/0x150
    [ 2160.844028] [<c016af00>] ? try_to_wake_up+0x240/0x240
    [ 2160.844048] [<c039a31e>] vga_arb_write+0x8e/0x4e0
    [ 2160.844070] [<c02abe34>] ? security_file_permission+0x24/0xb0
    [ 2160.844094] [<c02337c3>] ? rw_verify_area+0x63/0x110
    [ 2160.844114] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2160.844133] [<c0233b48>] vfs_write+0x88/0x160
    [ 2160.844153] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2160.844173] [<c0233e3d>] sys_write+0x3d/0x80
    [ 2160.844194] [<c04d7e1f>] sysenter_do_call+0x12/0x28
    [ 2280.843266] INFO: task X:297 blocked for more than 120 seconds.
    [ 2280.843285] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 2280.843296] X D 016bde74 0 297 296 0x00400000
    [ 2280.843319] d26bded0 00000082 0826cde0 016bde74 00000000 c060c220 c06dd6c0 c06dd6c0
    [ 2280.843352] 9c9af169 0000017e d3a826c0 d26a1f20 00000000 00000000 00000000 00000003
    [ 2280.843382] d26bdeb0 00000000 d26bdec0 d2ecc136 00000000 00000000 d26bdec4 c02f39af
    [ 2280.843413] Call Trace:
    [ 2280.843465] [<c02f39af>] ? string.isra.4+0x2f/0xa0
    [ 2280.843491] [<c04d0fc3>] schedule+0x23/0x60
    [ 2280.843521] [<c039a077>] vga_get+0xe7/0x150
    [ 2280.843558] [<c016af00>] ? try_to_wake_up+0x240/0x240
    [ 2280.843579] [<c039a31e>] vga_arb_write+0x8e/0x4e0
    [ 2280.843606] [<c02abe34>] ? security_file_permission+0x24/0xb0
    [ 2280.843641] [<c02337c3>] ? rw_verify_area+0x63/0x110
    [ 2280.843661] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2280.843681] [<c0233b48>] vfs_write+0x88/0x160
    [ 2280.843700] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2280.843720] [<c0233e3d>] sys_write+0x3d/0x80
    [ 2280.843743] [<c04d7e1f>] sysenter_do_call+0x12/0x28
    [ 2280.843764] INFO: task Xorg:439 blocked for more than 120 seconds.
    [ 2280.843774] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 2280.843783] Xorg D 01cebe74 0 439 438 0x00400000
    [ 2280.843802] d1cebed0 00003082 bf8b2890 01cebe74 00000000 d1cf8000 c06dd6c0 c06dd6c0
    [ 2280.843833] 00000000 00000176 d3a826c0 d2156450 00004000 00000000 00000000 d1cebea4
    [ 2280.843863] c014b8e5 00000000 d1cebec0 d2ecc4b6 00000000 00000000 d1cebec4 c02f39af
    [ 2280.843893] Call Trace:
    [ 2280.843927] [<c014b8e5>] ? __set_task_blocked+0x35/0x80
    [ 2280.843952] [<c02f39af>] ? string.isra.4+0x2f/0xa0
    [ 2280.843972] [<c04d0fc3>] schedule+0x23/0x60
    [ 2280.843993] [<c039a077>] vga_get+0xe7/0x150
    [ 2280.844018] [<c016af00>] ? try_to_wake_up+0x240/0x240
    [ 2280.844038] [<c039a31e>] vga_arb_write+0x8e/0x4e0
    [ 2280.844059] [<c02abe34>] ? security_file_permission+0x24/0xb0
    [ 2280.844083] [<c02337c3>] ? rw_verify_area+0x63/0x110
    [ 2280.844103] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2280.844123] [<c0233b48>] vfs_write+0x88/0x160
    [ 2280.844142] [<c039a290>] ? vga_tryget+0xa0/0xa0
    [ 2280.844163] [<c0233e3d>] sys_write+0x3d/0x80
    [ 2280.844183] [<c04d7e1f>] sysenter_do_call+0x12/0x28
    My Logfiles
    The contents of my /var/log/Xorg.0.log are (with Xorg still running but hung)
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 1502.702] X Protocol Version 11, Revision 0
    [ 1502.703] Build Operating System: Linux 3.6.2-1-ARCH i686
    [ 1502.704] Current Operating System: Linux bora 3.6.2-1-ARCH #1 SMP PREEMPT Sat Oct 13 07:19:40 CEST 2012 i686
    [ 1502.705] Kernel command line: root=/dev/sda1 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 1502.706] Build Date: 19 October 2012 03:58:01PM
    [ 1502.707]
    [ 1502.708] Current version of pixman: 0.26.2
    [ 1502.709] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1502.710] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1502.713] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 24 04:30:43 2012
    [ 1502.819] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1502.871] (==) ServerLayout "X.org Configured"
    [ 1502.871] (**) |-->Screen "Screen0" (0)
    [ 1502.871] (**) | |-->Monitor "Monitor0"
    [ 1502.872] (**) | |-->Device "Card0"
    [ 1502.873] (**) |-->Screen "Screen1" (1)
    [ 1502.873] (**) | |-->Monitor "Monitor1"
    [ 1502.874] (**) | |-->Device "Card1"
    [ 1502.874] (==) Automatically adding devices
    [ 1502.874] (==) Automatically enabling devices
    [ 1502.874] (==) Automatically adding GPU devices
    [ 1502.953] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 1502.953] Entry deleted from font path.
    [ 1502.953] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1502.954] Entry deleted from font path.
    [ 1502.954] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1502.954] Entry deleted from font path.
    [ 1502.955] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1502.955] Entry deleted from font path.
    [ 1502.955] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1502.956] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1502.956] Entry deleted from font path.
    [ 1502.956] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1502.956] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 1502.956] Entry deleted from font path.
    [ 1502.956] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1502.956] Entry deleted from font path.
    [ 1502.956] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1502.956] Entry deleted from font path.
    [ 1502.957] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1502.957] Entry deleted from font path.
    [ 1502.957] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1502.957] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1502.957] Entry deleted from font path.
    [ 1502.957] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1502.957] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/misc/
    [ 1502.957] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 1502.957] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 1502.980] (II) Loader magic: 0x825a620
    [ 1502.980] (II) Module ABI versions:
    [ 1502.981] X.Org ANSI C Emulation: 0.4
    [ 1502.981] X.Org Video Driver: 13.0
    [ 1502.981] X.Org XInput driver : 18.0
    [ 1502.981] X.Org Server Extension : 7.0
    [ 1502.987] (--) PCI: (0:0:15:0) 121a:0005:121a:0036 rev 1, Mem @ 0xda000000/33554432, 0xdc000000/33554432, I/O @ 0x0000ec00/256, BIOS @ 0x????????/65536
    [ 1502.987] (--) PCI:*(0:1:0:0) 1002:5246:1002:0008 rev 0, Mem @ 0xd4000000/67108864, 0xd9000000/16384, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
    [ 1502.988] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 1502.999] Initializing built-in extension Generic Event Extension
    [ 1503.000] Initializing built-in extension SHAPE
    [ 1503.001] Initializing built-in extension MIT-SHM
    [ 1503.002] Initializing built-in extension XInputExtension
    [ 1503.002] Initializing built-in extension XTEST
    [ 1503.003] Initializing built-in extension BIG-REQUESTS
    [ 1503.004] Initializing built-in extension SYNC
    [ 1503.005] Initializing built-in extension XKEYBOARD
    [ 1503.006] Initializing built-in extension XC-MISC
    [ 1503.006] Initializing built-in extension SECURITY
    [ 1503.007] Initializing built-in extension XINERAMA
    [ 1503.008] Initializing built-in extension XFIXES
    [ 1503.009] Initializing built-in extension RENDER
    [ 1503.009] Initializing built-in extension RANDR
    [ 1503.010] Initializing built-in extension COMPOSITE
    [ 1503.010] Initializing built-in extension DAMAGE
    [ 1503.010] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1503.011] Initializing built-in extension DOUBLE-BUFFER
    [ 1503.011] Initializing built-in extension RECORD
    [ 1503.012] Initializing built-in extension DPMS
    [ 1503.012] Initializing built-in extension X-Resource
    [ 1503.013] Initializing built-in extension XVideo
    [ 1503.013] Initializing built-in extension XVideo-MotionCompensation
    [ 1503.014] Initializing built-in extension XFree86-VidModeExtension
    [ 1503.014] Initializing built-in extension XFree86-DGA
    [ 1503.015] Initializing built-in extension XFree86-DRI
    [ 1503.015] Initializing built-in extension DRI2
    [ 1503.015] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 1503.015] (II) LoadModule: "glx"
    [ 1503.033] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1503.133] (II) Module glx: vendor="X.Org Foundation"
    [ 1503.133] compiled for 1.13.0, module version = 1.0.0
    [ 1503.133] ABI class: X.Org Server Extension, version 7.0
    [ 1503.133] (==) AIGLX enabled
    [ 1503.135] Loading extension GLX
    [ 1503.135] (II) LoadModule: "r128"
    [ 1503.153] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
    [ 1503.218] (II) Module r128: vendor="X.Org Foundation"
    [ 1503.218] compiled for 1.13.0, module version = 6.9.1
    [ 1503.218] Module class: X.Org Video Driver
    [ 1503.218] ABI class: X.Org Video Driver, version 13.0
    [ 1503.219] (II) LoadModule: "tdfx"
    [ 1503.220] (II) Loading /usr/lib/xorg/modules/drivers/tdfx_drv.so
    [ 1503.269] (II) Module tdfx: vendor="X.Org Foundation"
    [ 1503.269] compiled for 1.13.0, module version = 1.4.5
    [ 1503.269] Module class: X.Org Video Driver
    [ 1503.270] ABI class: X.Org Video Driver, version 13.0
    [ 1503.270] (II) R128: Driver for ATI Rage 128 chipsets:
    ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
    ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
    ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
    ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
    ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
    ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
    ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
    ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
    ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
    ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
    ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
    ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
    ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
    ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
    ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
    ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
    ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
    ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
    ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
    ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
    ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
    ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
    ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
    ATI Rage 128 Pro ULTRA TU (AGP?)
    [ 1503.275] (II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
    3dfx Voodoo3, 3dfx Voodoo5
    [ 1503.276] (--) using VT number 2
    [ 1503.281] (II) TDFX(1): PIO base = 0xec00
    [ 1503.281] (II) R128(0): PCI bus 1 card 0 func 0
    [ 1503.282] (==) R128(0): Depth 24, (--) framebuffer bpp 32
    [ 1503.282] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 1503.282] (==) R128(0): Default visual is TrueColor
    [ 1503.282] (II) Loading sub module "vgahw"
    [ 1503.282] (II) LoadModule: "vgahw"
    [ 1503.287] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 1503.331] (II) Module vgahw: vendor="X.Org Foundation"
    [ 1503.331] compiled for 1.13.0, module version = 0.1.0
    [ 1503.331] ABI class: X.Org Video Driver, version 13.0
    [ 1503.332] (II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
    [ 1503.332] (==) R128(0): RGB weight 888
    [ 1503.332] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
    [ 1503.332] (II) Loading sub module "int10"
    [ 1503.332] (II) LoadModule: "int10"
    [ 1503.333] (II) Loading /usr/lib/xorg/modules/libint10.so
    [ 1503.368] (II) Module int10: vendor="X.Org Foundation"
    [ 1503.369] compiled for 1.13.0, module version = 1.0.0
    [ 1503.369] ABI class: X.Org Video Driver, version 13.0
    [ 1503.369] (II) R128(0): initializing int10
    [ 1503.392] (II) R128(0): Primary V_BIOS segment is: 0xc000
    [ 1503.392] (--) R128(0): Chipset: "ATI Rage 128 GL RF (AGP)" (ChipID = 0x5246)
    [ 1503.392] (--) R128(0): Linear framebuffer at 0xd4000000
    [ 1503.392] (--) R128(0): MMIO registers at 0xd9000000
    [ 1503.393] (--) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1)
    [ 1503.393] (**) R128(0): Using external CRT for display
    [ 1503.424] (II) R128(0): Primary Display == Type 1
    [ 1503.424] (WW) R128(0): Can't determine panel dimensions, and none specified.
    Disabling programming of FP registers.
    [ 1503.424] (II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=25000; xclk=9000
    [ 1503.424] (II) Loading sub module "ddc"
    [ 1503.424] (II) LoadModule: "ddc"
    [ 1503.424] (II) Module "ddc" already built-in
    [ 1503.424] (II) Loading sub module "vbe"
    [ 1503.425] (II) LoadModule: "vbe"
    [ 1503.425] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 1503.438] (II) Module vbe: vendor="X.Org Foundation"
    [ 1503.439] compiled for 1.13.0, module version = 1.1.0
    [ 1503.439] ABI class: X.Org Video Driver, version 13.0
    [ 1503.440] (II) R128(0): VESA BIOS detected
    [ 1503.440] (II) R128(0): VESA VBE Version 2.0
    [ 1503.440] (II) R128(0): VESA VBE Total Mem: 16384 kB
    [ 1503.440] (II) R128(0): VESA VBE OEM: ATI RAGE128
    [ 1503.440] (II) R128(0): VESA VBE OEM Software Rev: 1.0
    [ 1503.440] (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
    [ 1503.440] (II) R128(0): VESA VBE OEM Product: R128
    [ 1503.440] (II) R128(0): VESA VBE OEM Product Rev: 01.00
    [ 1503.441] (II) Loading sub module "ddc"
    [ 1503.441] (II) LoadModule: "ddc"
    [ 1503.441] (II) Module "ddc" already built-in
    [ 1503.534] (II) R128(0): VESA VBE DDC supported
    [ 1503.534] (II) R128(0): VESA VBE DDC Level 2
    [ 1503.534] (II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
    [ 1504.071] (II) R128(0): VESA VBE DDC read successfully
    [ 1504.072] (II) R128(0): Manufacturer: AOC Model: a781 Serial#: 11653
    [ 1504.072] (II) R128(0): Year: 2003 Week: 18
    [ 1504.072] (II) R128(0): EDID Version: 1.3
    [ 1504.072] (II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 1504.072] (II) R128(0): Sync: Separate
    [ 1504.072] (II) R128(0): Max Image Size [cm]: horiz.: 34 vert.: 27
    [ 1504.072] (II) R128(0): Gamma: 2.20
    [ 1504.073] (II) R128(0): DPMS capabilities: Off; RGB/Color Display
    [ 1504.073] (II) R128(0): First detailed timing is preferred mode
    [ 1504.073] (II) R128(0): redX: 0.631 redY: 0.354 greenX: 0.294 greenY: 0.596
    [ 1504.073] (II) R128(0): blueX: 0.143 blueY: 0.087 whiteX: 0.300 whiteY: 0.340
    [ 1504.073] (II) R128(0): Supported established timings:
    [ 1504.073] (II) R128(0): 720x400@70Hz
    [ 1504.074] (II) R128(0): 640x480@60Hz
    [ 1504.074] (II) R128(0): 640x480@67Hz
    [ 1504.074] (II) R128(0): 640x480@72Hz
    [ 1504.074] (II) R128(0): 640x480@75Hz
    [ 1504.074] (II) R128(0): 800x600@56Hz
    [ 1504.074] (II) R128(0): 800x600@60Hz
    [ 1504.074] (II) R128(0): 800x600@72Hz
    [ 1504.074] (II) R128(0): 800x600@75Hz
    [ 1504.074] (II) R128(0): 832x624@75Hz
    [ 1504.075] (II) R128(0): 1024x768@60Hz
    [ 1504.075] (II) R128(0): 1024x768@70Hz
    [ 1504.075] (II) R128(0): 1024x768@75Hz
    [ 1504.075] (II) R128(0): 1280x1024@75Hz
    [ 1504.075] (II) R128(0): Manufacturer's mask: 0
    [ 1504.075] (II) R128(0): Supported standard timings:
    [ 1504.075] (II) R128(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1504.075] (II) R128(0): Supported detailed timing:
    [ 1504.075] (II) R128(0): clock: 135.0 MHz Image Size: 340 x 270 mm
    [ 1504.076] (II) R128(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 1504.076] (II) R128(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 1504.076] (II) R128(0): Serial No: T7SJ34AZ11653
    [ 1504.076] (II) R128(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 135 MHz
    [ 1504.076] (II) R128(0): Monitor name: LM720/LM720A
    [ 1504.076] (II) R128(0): EDID (in hex):
    [ 1504.077] (II) R128(0): 00ffffffffffff0005e381a7852d0000
    [ 1504.077] (II) R128(0): 120d010368221b782aa69ca15a4b9824
    [ 1504.077] (II) R128(0): 164c57bfef0081800101010101010101
    [ 1504.077] (II) R128(0): 010101010101bc34009851002a401090
    [ 1504.077] (II) R128(0): 1300540e11000018000000ff00543753
    [ 1504.077] (II) R128(0): 4a3334415a3131363533000000fd0037
    [ 1504.077] (II) R128(0): 4b1e530d000a202020202020000000fc
    [ 1504.077] (II) R128(0): 004c4d3732302f4c4d373230410a00d5
    [ 1504.078] (II) R128(0): EDID vendor "AOC", prod id 42881
    [ 1504.078] (II) R128(0): Using EDID range info for horizontal sync
    [ 1504.078] (II) R128(0): Using EDID range info for vertical refresh
    [ 1504.078] (II) R128(0): Printing DDC gathered Modelines:
    [ 1504.078] (II) R128(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz eP)
    ... (more Modelines)
    [ 1504.080] (II) R128(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1504.081] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 1504.081] (II) R128(0): Monitor0: Using hsync range of 30.00-83.00 kHz
    [ 1504.081] (II) R128(0): Monitor0: Using vrefresh range of 55.00-75.00 Hz
    [ 1504.081] (II) R128(0): Monitor0: Using maximum pixel clock of 135.00 MHz
    [ 1504.081] (II) R128(0): Estimated virtual size for aspect ratio 1.2593 is 1280x1024
    [ 1504.081] (II) R128(0): Clock range: 12.50 to 250.00 MHz
    [ 1504.082] (II) R128(0): Not using default mode "640x350" (vrefresh out of range)
    ... (more Not using... - messages)
    [ 1504.087] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
    [ 1504.088] (--) R128(0): Virtual size is 1280x1024 (pitch 1280)
    [ 1504.089] (**) R128(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
    [ 1504.089] (II) R128(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz ezP)
    ... (more Modelines)
    [ 1504.103] (II) R128(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
    [ 1504.103] (**) R128(0): Display dimensions: (340, 270) mm
    [ 1504.103] (**) R128(0): DPI set to (95, 96)
    [ 1504.103] (II) Loading sub module "fb"
    [ 1504.104] (II) LoadModule: "fb"
    [ 1504.104] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1504.161] (II) Module fb: vendor="X.Org Foundation"
    [ 1504.161] compiled for 1.13.0, module version = 1.0.0
    [ 1504.161] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1504.161] (II) Loading sub module "ramdac"
    [ 1504.161] (II) LoadModule: "ramdac"
    [ 1504.161] (II) Module "ramdac" already built-in
    [ 1504.162] (II) Loading sub module "shadowfb"
    [ 1504.162] (II) LoadModule: "shadowfb"
    [ 1504.162] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1504.176] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1504.176] compiled for 1.13.0, module version = 1.0.0
    [ 1504.176] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1504.176] (II) R128(0): Page flipping disabled
    [ 1504.177] (!!) R128(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    [ 1504.177] (II) Loading sub module "vgahw"
    [ 1504.177] (II) LoadModule: "vgahw"
    [ 1504.178] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 1504.178] (II) Module vgahw: vendor="X.Org Foundation"
    [ 1504.179] compiled for 1.13.0, module version = 0.1.0
    [ 1504.179] ABI class: X.Org Video Driver, version 13.0
    [ 1504.179] (II) Loading sub module "int10"
    [ 1504.179] (II) LoadModule: "int10"
    [ 1504.180] (II) Loading /usr/lib/xorg/modules/libint10.so
    [ 1504.180] (II) Module int10: vendor="X.Org Foundation"
    [ 1504.180] compiled for 1.13.0, module version = 1.0.0
    [ 1504.180] ABI class: X.Org Video Driver, version 13.0
    [ 1504.180] (II) TDFX(1): Softbooting the board (through the int10 interface).
    [ 1508.298] (II) TDFX(1): Softbooting the board succeeded.
    [ 1508.298] (==) TDFX(1): Depth 24, (--) framebuffer bpp 32
    [ 1508.298] (==) TDFX(1): RGB weight 888
    [ 1508.298] (==) TDFX(1): Default visual is TrueColor
    [ 1508.299] (--) TDFX(1): Chipset: "3dfx Voodoo3"
    [ 1508.299] (--) TDFX(1): Linear framebuffer at 0xDC000000
    [ 1508.299] (--) TDFX(1): MMIO registers at addr 0xDA000000
    [ 1508.299] (--) TDFX(1): PIO registers at addr 0xEC00
    [ 1508.299] (II) TDFX(1): DRAMINIT1 read 0x40530031, programming 0x40202031 (not Banshee)
    [ 1508.300] (II) TDFX(1): TDFXInitChips: numchips = 1
    [ 1508.300] (II) TDFX(1): TDFXInitChips: cfgbits = 0x00000000, initbits = 0x00000001
    [ 1508.300] (II) TDFX(1): TDFXInitChips: mem0base = 0xda000000, mem1base = 0xdc000008
    [ 1508.300] (II) TDFX(1): TDFXInitChips: mem0size = 0x02000000, mem1size = 0x02000000
    [ 1508.300] (II) TDFX(1): TDFXInitChips: mem0bits = 0x00000005, mem1bits = 0x00000050
    [ 1508.300] (II) TDFX(1): TDFXInitChips: cfgbits = 0x00000055
    [ 1508.301] (II) TDFX(1): TDFXInitChips: MMIOAddr[0] = 0xda000000
    [ 1508.301] (II) TDFX(1): TDFXInitChips: LinearAddr[0] = 0xdc000008
    [ 1508.301] (--) TDFX(1): VideoRAM: 16384 kByte Mapping 32768 kByte
    [ 1508.302] (==) TDFX(1): Using gamma correction (1.0, 1.0, 1.0)
    [ 1508.302] (II) Loading sub module "fb"
    [ 1508.302] (II) LoadModule: "fb"
    [ 1508.302] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1508.302] (II) Module fb: vendor="X.Org Foundation"
    [ 1508.303] compiled for 1.13.0, module version = 1.0.0
    [ 1508.303] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1508.303] (II) Loading sub module "xaa"
    [ 1508.303] (II) LoadModule: "xaa"
    [ 1508.336] (WW) Warning, couldn't open module xaa
    [ 1508.336] (II) UnloadModule: "xaa"
    [ 1508.336] (II) Unloading xaa
    [ 1508.336] (EE) TDFX: Failed to load module "xaa" (module does not exist, 0)
    [ 1508.336] (WW) TDFX(1): No acceleration available
    [ 1508.336] (**) TDFX(1): ShowCache Disabled
    [ 1508.337] (**) TDFX(1): video key default 0x1e
    [ 1508.337] (II) Loading sub module "ramdac"
    [ 1508.337] (II) LoadModule: "ramdac"
    [ 1508.337] (II) Module "ramdac" already built-in
    [ 1508.337] (II) Loading sub module "i2c"
    [ 1508.337] (II) LoadModule: "i2c"
    [ 1508.337] (II) Module "i2c" already built-in
    [ 1508.337] (II) Loading sub module "ddc"
    [ 1508.338] (II) LoadModule: "ddc"
    [ 1508.338] (II) Module "ddc" already built-in
    [ 1508.338] (II) TDFX(1): I2C bus "DDC" initialized.
    [ 1508.338] (II) TDFX(1): I2C device "DDC:ddc2" registered at address 0xA0.
    [ 1508.404] (II) TDFX(1): Manufacturer: AOC Model: a781 Serial#: 2230
    [ 1508.404] (II) TDFX(1): Year: 2003 Week: 20
    [ 1508.404] (II) TDFX(1): EDID Version: 1.3
    [ 1508.404] (II) TDFX(1): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 1508.404] (II) TDFX(1): Sync: Separate
    [ 1508.405] (II) TDFX(1): Max Image Size [cm]: horiz.: 34 vert.: 27
    [ 1508.405] (II) TDFX(1): Gamma: 2.20
    [ 1508.405] (II) TDFX(1): DPMS capabilities: Off; RGB/Color Display
    [ 1508.405] (II) TDFX(1): First detailed timing is preferred mode
    [ 1508.405] (II) TDFX(1): redX: 0.631 redY: 0.354 greenX: 0.294 greenY: 0.596
    [ 1508.405] (II) TDFX(1): blueX: 0.143 blueY: 0.087 whiteX: 0.300 whiteY: 0.340
    [ 1508.406] (II) TDFX(1): Supported established timings:
    [ 1508.406] (II) TDFX(1): 720x400@70Hz
    [ 1508.406] (II) TDFX(1): 640x480@60Hz
    [ 1508.406] (II) TDFX(1): 640x480@67Hz
    [ 1508.406] (II) TDFX(1): 640x480@72Hz
    [ 1508.406] (II) TDFX(1): 640x480@75Hz
    [ 1508.406] (II) TDFX(1): 800x600@56Hz
    [ 1508.406] (II) TDFX(1): 800x600@60Hz
    [ 1508.407] (II) TDFX(1): 800x600@72Hz
    [ 1508.407] (II) TDFX(1): 800x600@75Hz
    [ 1508.407] (II) TDFX(1): 832x624@75Hz
    [ 1508.407] (II) TDFX(1): 1024x768@60Hz
    [ 1508.407] (II) TDFX(1): 1024x768@70Hz
    [ 1508.407] (II) TDFX(1): 1024x768@75Hz
    [ 1508.407] (II) TDFX(1): 1280x1024@75Hz
    [ 1508.407] (II) TDFX(1): Manufacturer's mask: 0
    [ 1508.407] (II) TDFX(1): Supported standard timings:
    [ 1508.408] (II) TDFX(1): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1508.408] (II) TDFX(1): Supported detailed timing:
    [ 1508.408] (II) TDFX(1): clock: 135.0 MHz Image Size: 340 x 270 mm
    [ 1508.408] (II) TDFX(1): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 1508.408] (II) TDFX(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 1508.408] (II) TDFX(1): Serial No: T7AJ35AD02230
    [ 1508.408] (II) TDFX(1): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 135 MHz
    [ 1508.409] (II) TDFX(1): Monitor name: LM720/LM720A
    [ 1508.409] (II) TDFX(1): EDID (in hex):
    [ 1508.409] (II) TDFX(1): 00ffffffffffff0005e381a7b6080000
    [ 1508.409] (II) TDFX(1): 140d010368221b782aa69ca15a4b9824
    [ 1508.409] (II) TDFX(1): 164c57bfef0081800101010101010101
    [ 1508.409] (II) TDFX(1): 010101010101bc34009851002a401090
    [ 1508.409] (II) TDFX(1): 1300540e11000018000000ff00543741
    [ 1508.410] (II) TDFX(1): 4a333541443032323330000000fd0037
    [ 1508.410] (II) TDFX(1): 4b1e530d000a202020202020000000fc
    [ 1508.410] (II) TDFX(1): 004c4d3732302f4c4d373230410a00f7
    [ 1508.410] (II) TDFX(1): EDID vendor "AOC", prod id 42881
    [ 1508.410] (II) TDFX(1): Using EDID range info for horizontal sync
    [ 1508.410] (II) TDFX(1): Using EDID range info for vertical refresh
    [ 1508.410] (II) TDFX(1): Printing DDC gathered Modelines:
    [ 1508.411] (II) TDFX(1): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz eP)
    ... (more Modelines)
    [ 1508.413] (II) TDFX(1): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1508.413] (II) TDFX(1): Monitor1: Using hsync range of 30.00-83.00 kHz
    [ 1508.413] (II) TDFX(1): Monitor1: Using vrefresh range of 55.00-75.00 Hz
    [ 1508.413] (II) TDFX(1): Monitor1: Using maximum pixel clock of 135.00 MHz
    [ 1508.413] (II) TDFX(1): Estimated virtual size for aspect ratio 1.2593 is 1280x1024
    [ 1508.413] (II) TDFX(1): Clock range: 12.00 to 300.00 MHz
    [ 1508.414] (II) TDFX(1): Not using default mode "640x350" (vrefresh out of range)
    ... (more TDFX Not using... - messages)
    [ 1508.419] (II) TDFX(1): Not using default mode "1024x768" (hsync out of range)
    [ 1508.420] (--) TDFX(1): Virtual size is 1280x1024 (pitch 1280)
    [ 1508.421] (**) TDFX(1): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
    [ 1508.421] (II) TDFX(1): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz ezP)
    [ 1508.421] (**) TDFX(1): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
    ... (more modelines from TDFX)
    [ 1508.435] (**) TDFX(1): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
    [ 1508.435] (II) TDFX(1): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
    [ 1508.435] (**) TDFX(1): Display dimensions: (340, 270) mm
    [ 1508.435] (**) TDFX(1): DPI set to (95, 96)
    [ 1508.435] (--) Depth 24 pixmap format is 32 bpp
    [ 1508.436] (II) R128(0): Acceleration of RENDER operations will be enabledupon successful loading of DRI and EXA
    [ 1508.546] (WW) R128(0): Direct rendering is not supported when VGA arb is necessary for the device
    [ 1508.547] (EE) R128(0): [dri] DRIScreenInit failed. Disabling DRI.
    [ 1508.577] (II) R128(0): Filling in EXA memory info
    [ 1508.577] (II) R128(0): Loading EXA module...
    [ 1508.577] (II) Loading sub module "exa"
    [ 1508.577] (II) LoadModule: "exa"
    [ 1508.578] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1508.632] (II) Module exa: vendor="X.Org Foundation"
    [ 1508.632] compiled for 1.13.0, module version = 2.6.0
    [ 1508.632] ABI class: X.Org Video Driver, version 13.0
    [ 1508.632] (II) R128(0): Allocating EXA driver...
    [ 1508.632] (II) R128(0): Acceleration enabled
    [ 1508.633] (II) R128(0): Filled in offs
    [ 1508.633] (II) R128(0): Going to init EXA...
    [ 1508.633] (II) R128(0): Setting up EXA callbacks
    [ 1508.633] (II) R128(0): Initalizing 2D acceleration engine...
    [ 1508.633] (II) R128(0): Initializing EXA driver...
    [ 1508.633] (II) EXA(0): Offscreen pixmap area of 11534336 bytes
    [ 1508.633] (II) EXA(0): Driver registered support for the following operations:
    [ 1508.634] (II) Solid
    [ 1508.634] (II) Copy
    [ 1508.634] (II) R128(0): EXA Acceleration enabled
    [ 1508.634] (==) R128(0): Backing store disabled
    [ 1508.635] (==) R128(0): Silken mouse enabled
    [ 1508.635] (II) R128(0): Using hardware cursor (scanline 13105)
    [ 1508.648] (==) R128(0): DPMS enabled
    [ 1508.648] (WW) R128(0): Direct rendering disabled
    [ 1508.649] (==) RandR enabled
    [ 1508.651] (II) TDFX(1): vgaHWGetIOBase: hwp->IOBase is 0x03d0
    [ 1508.651] (II) TDFX(1): Changing back offset from 0x005ff000 to 0x005fe000
    [ 1508.651] (II) TDFX(1): Not enough video memory available for textures and depth buffer
    and/or back buffer. Disabling DRI. To use DRI try lower
    resolution modes and/or a smaller virtual screen size
    [ 1508.651] (II) TDFX(1): Cursor Offset: [0x00000000,0x00001000)
    [ 1508.651] (II) TDFX(1): Fifo Offset: [0x00001000, 0x00041000)
    [ 1508.651] (II) TDFX(1): Front Buffer Offset: [0x00041000, 0x00692800)
    [ 1508.651] (II) TDFX(1): (NOT USED) Texture Offset: [0x00692800, 0x006927FF)
    [ 1508.651] (II) TDFX(1): (NOT USED) BackOffset: [0x01000000, 0x01500000)
    [ 1508.652] (II) TDFX(1): (NOT USED) DepthOffset: [0xFFFFFFFF, 0x004FFFFF)
    [ 1508.652] (II) TDFX(1): Minimum 270, Maximum 1023 lines of offscreen memory available
    [ 1508.663] (==) TDFX(1): Backing store disabled
    [ 1508.663] (==) TDFX(1): Silken mouse enabled
    [ 1508.664] (==) TDFX(1): DPMS enabled
    [ 1508.664] (WW) TDFX(1): Direct rendering disabled
    [ 1508.665] (==) RandR enabled
    [ 1508.665] (II) Found 2 VGA devices: arbiter wrapping enabled
    [ 1508.734] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 1508.734] (II) AIGLX: Screen 0 is not DRI capable
    [ 1509.746] (II) AIGLX: Loaded and initialized swrast
    [ 1509.746] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 1509.747] (II) AIGLX: Screen 1 is not DRI2 capable
    [ 1509.747] (II) AIGLX: Screen 1 is not DRI capable
    [ 1509.752] (II) AIGLX: Loaded and initialized swrast
    [ 1509.752] (II) GLX: Initialized DRISWRAST GL provider for screen 1
    [ 1510.656] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 1510.656] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1510.657] (II) LoadModule: "evdev"
    [ 1510.658] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1510.701] (II) Module evdev: vendor="X.Org Foundation"
    [ 1510.701] compiled for 1.13.0, module version = 2.7.3
    [ 1510.701] Module class: X.Org XInput Driver
    [ 1510.701] ABI class: X.Org XInput driver, version 18.0
    [ 1510.701] (II) Using input driver 'evdev' for 'Power Button'
    [ 1510.701] (**) Power Button: always reports core events
    [ 1510.702] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 1510.702] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1510.702] (--) evdev: Power Button: Found keys
    [ 1510.703] (II) evdev: Power Button: Configuring as keyboard
    [ 1510.703] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 1510.703] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 1510.703] (**) Option "xkb_rules" "evdev"
    [ 1510.703] (**) Option "xkb_model" "evdev"
    [ 1510.704] (**) Option "xkb_layout" "us"
    [ 1510.903] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 1510.903] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1510.904] (II) Using input driver 'evdev' for 'Power Button'
    [ 1510.904] (**) Power Button: always reports core events
    [ 1510.904] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 1510.904] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1510.904] (--) evdev: Power Button: Found keys
    [ 1510.904] (II) evdev: Power Button: Configuring as keyboard
    [ 1510.905] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 1510.905] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 1510.905] (**) Option "xkb_rules" "evdev"
    [ 1510.905] (**) Option "xkb_model" "evdev"
    [ 1510.905] (**) Option "xkb_layout" "us"
    [ 1510.910] (II) config/udev: Adding input device pac7311 (/dev/input/event4)
    [ 1510.910] (**) pac7311: Applying InputClass "evdev keyboard catchall"
    [ 1510.910] (II) Using input driver 'evdev' for 'pac7311'
    [ 1510.910] (**) pac7311: always reports core events
    [ 1510.910] (**) evdev: pac7311: Device: "/dev/input/event4"
    [ 1510.911] (--) evdev: pac7311: Vendor 0x93a Product 0x260e
    [ 1510.911] (--) evdev: pac7311: Found keys
    [ 1510.911] (II) evdev: pac7311: Configuring as keyboard
    [ 1510.911] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/input/input4/event4"
    [ 1510.911] (II) XINPUT: Adding extended input device "pac7311" (type: KEYBOARD, id 8)
    [ 1510.911] (**) Option "xkb_rules" "evdev"
    [ 1510.912] (**) Option "xkb_model" "evdev"
    [ 1510.912] (**) Option "xkb_layout" "us"
    [ 1510.916] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 1510.916] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1510.917] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 1510.917] (**) AT Translated Set 2 keyboard: always reports core events
    [ 1510.917] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 1510.917] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 1510.917] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 1510.917] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 1510.918] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 1510.918] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 1510.918] (**) Option "xkb_rules" "evdev"
    [ 1510.918] (**) Option "xkb_model" "evdev"
    [ 1510.918] (**) Option "xkb_layout" "us"
    [ 1510.923] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
    [ 1510.923] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
    [ 1510.923] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
    [ 1510.923] (**) ImPS/2 Generic Wheel Mouse: always reports core events
    [ 1510.924] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
    [ 1510.924] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
    [ 1510.924] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
    [ 1510.924] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
    [ 1510.924] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
    [ 1510.924] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
    [ 1510.925] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
    [ 1510.925] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
    [ 1510.925] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 1510.925] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1510.925] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
    [ 1510.925] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
    [ 1510.926] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
    [ 1510.927] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 1510.927] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
    [ 1510.927] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
    [ 1510.928] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
    [ 1510.930] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
    [ 1510.930] (II) No input driver specified, ignoring this device.
    [ 1510.930] (II) This device may have been added with another device file.
    [ 1510.932] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 1510.932] (II) No input driver specified, ignoring this device.
    [ 1510.932] (II) This device may have been added with another device file.
    Any help is appreciated.
    Last edited by e01f (2012-10-24 02:00:49)

    I added
    Option "SWCursor" "true"
    to my config, and it didn't seem to make a difference. Do those
    [ 1800.843462] Call Trace:
    [ 1800.843517] [<c02f39af>] ? string.isra.4+0x2f/0xa0
    [ 1800.843545] [<c04d0fc3>] schedule+0x23/0x60
    [ 1800.843576] [<c039a077>] vga_get+0xe7/0x150
    traces in dmesg tell you something? I regret that I am relatively new to Linux and therefore don't know much about the way drivers work, but I have been a C/C++/Pascal/PHP/... programmer for many years and have some expereince with assembler programming.
    Thanks again for your support!

  • Entire image moves when using the Healing Brush

    After I alt/click to select the color for the brush, the entire image moves with the mouse.  Any ideas on this?
    Message title was edited by: Brett N

    It'll be the overlay moving. Enable "Clipped" as shown below:

  • Firefox responds generally very slow but fast when moving the mouse

    Firefox respons very slow but speeds up when I move the mouse over the page. Keeping the mouse moving results in normal speed.
    ?? Peter

    Weird thing is that if I revert back to FF15, everything works with HA enabled and full bookmark menu.
    but its a no go with FF16
    PEACE

  • Individual Panels "Jump" when moving the mouse over

    I am using AE CS2. When I move the mouse over individual panels, the panels "jump". They don't change to a new location, they just jump once in place as if they have been bumped. It is quite annoying. What causes this?
    Thanks.

    Microsoft Intellipoint software is known to cause this issue.

  • Stop waking the screensaver when moving the mouse

    I am using Mac OX 10.6.8, i would like to use itunes artwork as screensaver and choose music. But it wake the mac every time i moved my mouse. Is there any solution? Or it doesn't work on my version?

    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • Background image moves when previewing the site

    I set up my background in the master. When I preview my site in the browser, the background location jumps around slightly as I navigate between pages.  Any ideas?

    Hi Brad,
    i'm also getting this. Really odd movement with both shape elements foreground and background and how type is rendering and moving up and down at will, as well as reflowing differently. Used Arial as was web safe so not sure why.
    Also have in sep text boxes as seemed normal way to do it.
    I had a more evolved thing going on with small shape bars between project title and the rationale on left hand side bar but that's all had to go out of the winder since the last update as moving was playing havoc page to page.
    I also had to paste in place my Navigation for site on each page individualy instead of using a MASTER to get to work correctly. Have tried to now put this on a NAV layer above all other content on MASTER as well as pinning it top and causing more movement so didn't upload or save.
    Have some screen grabs of what I am seeing in the PREVIEW in Muse top and bottom of page and also the DESIGN view top and bottom of page.
    As mentioned, haven't saved or uploaded to my ftp as expecting a client to look at some of my work and can't afford them looking when it's busted with some issue or another.
    Any light shed on this issue would be greatly appreciated. As I keep saying, I love the program but there do seem to be some big issues that are making me spend lots and lots of investigatory time with hit and miss results.
    Thanks in advance.
    Site url as it currently stands is: http://www.saraundo.com

  • Screen turns blue when moving the screen up and down

    Hi,
    I work on my laptop everyday and I move the screen in diffent angles for me to see the screen better from where I am sitting, but recently the screen turns completely blue. I can still see everything but all the white colors turn light blue.
    The laptop is brand new.
    Regards,

    Hi there @SanneSA 
    Welcome to the HP Support Forums!
    I understand that your notebook display is behaving a bit erratically.  Since it is new I would recommend calling in to phone support as you will probably resolve the issue faster. You can reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    If you wish to continue here, then i am happy to help, just please post the full product number and operating system for your notebook so I can see what I can find to help. Please read the following documents if you need help in finding those.
    How Do I Find My Model Number or Product Number?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    For now you can take a look at these documents that may help sort through the display issue.
    Resolving Problems with Notebook Displays (Windows 7 and Windows 8)
    Diagnosing a Liquid Crystal Display (LCD) for Damage
    This page is more informational about displays, for your reference.
    About LCD Panel Defects and Terminology for HP Pavilion or Compaq Presario Notebook PCs
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Strange hi pitch noise thru headphones button only when moving the mouse!?

    So i'm sitting there with a pair of sony headphones working on my intel imac and I notice a high pitch (but very quiet) noise.
    Eventually I work out that it only happens when I move my mouse.
    Does this happen to anyone else?

    I saw these last year!
    http://discussions.apple.com/thread.jspa?messageID=2713451&#2713451
    http://discussions.apple.com/thread.jspa?messageID=2301548&#2301548
    For more go here
    http://discussions.apple.com/search.jspa?threadID=&q=mightymouse+audionoise&objID=c189&dateRange=lastyear&userID=&numResults=15
    17" iMac Intel Core Duo 1.5GB Ram   Mac OS X (10.4.9)   Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano

  • Why does moving the mouse over an IMAQ image display slow the GUI down so much?

    I have a large application with several vi's running simultaneously under labview 8.6.1.  When I mouse over an image display control in one of the vi's, everything slows down a shocking amount in all the other vi's.  The windows task manager does not show a large increase in CPU use.  My pc is has a quad cpu with 4GB of RAM, and the CPU and memory loads do not appear to be terribly taxing to the system.  However, many of my vi's apparently come almost to a standstill if I just move the mouse in a circle around my image control.
    This looks like it is largely a GUI display issue.  If I make a new vi and put a while loop in it that only displays the iteration loop number to an indicator, I can see the iterating occurring, then stopping totally when I mouse inside the image display control.  When I stop moving the mouse inside the control, or when I move it outside the control, the interation loop number jumps up, as if it had been incrementing behind the scenes the whole time.  So only display of the interating was halted.
    This problem occurs even if the vi with the image control is not executing.  If the vi with the image control is open but not running, and I mouse over the image on it, the other guis all come to a screeching halt.
    Does mousing in the image display control really utterly crush all other guis in all other labview windows?  Is this an issue inherent to the image display control?  If so, is there anything I can do about this? 
    Also, this issue is not entirely limited to display.  I started looking at it in greater detail because this issue also exposed what I think is a race condition in my code.  I have a vi that acquires an image from a ccd and puts it into an IMAQ image.ctl.  This image then gets passed up to a vi up the call chain, and is put on a queue and sent over to be de-queued by a vi that has the image display control.  Here's the kicker:  when I mouse over the image display control, the image successfully gets acquired inside the subvi, and if I probe the wire leading to the output IMAQ image display.ctl, I see the image.  If I simultaneously probe the wire coming out of the subvi one level up the call chain, the image gets lost about half the time.  This only happens if I am mousing in the image display control IN A TOTALLY DIFFERENT AND SEPARATE VI.  If I bump up the priority of the ccd image acquisition vi to 'highest priority', the problem only happens about 1% of the time, and I really have to mouse around to make it happen.  Still, it's disturbing that mousing in the GUI in one window results in a failure of a separate subvi to simply pass an image up the call chain.  I understand that IMAQ images are referenced rather than passed by value, but I don't see why there should be a failure to pass the image up the call chain.  I've looked for a race condition, but can't find one.
    Eric

    I have finally been able to replicate the behavior that you are seeing on another computer once the image was large enough.  Here are a few notes about this behavior:
    First. The UI only slows down when the images are large, 16 bit images.  The reason why this is unique to 16 bit images is that they can only be displayed on the front panel as 8 bit images.  The workaround that Weiyuan suggested to change the 16 bit display mapping hints towards the root of the problem...that any time a mouse runs over the indicator, Windows asks the entire image to re-draw (having a separate indicator overlapping the image will create the same behavior).  With a 16 bit image, not only does the image have to re-draw on the screen but the 16 bit pixels need to be mapped to 8 bits.  When setting the 16 bit display mapping to Full Dynamic, this requires mor computation/pixel than 90% dynamic or one of the other mapping schemes.
    This is expected behavior if your program is running and you're trying to display a large 16 bit image.  To fix this behavior there are a couple options:
    Change the 16 bit display mapping to something other than full dynamic.  You can choose which 8 bits to display or if you want to map the bits. 
    Resize the image just for viewing purposes on your front panel (since you aren't going to view every single pixel of you image on the screen). You can use the IMAQ Resample.vi to do this.  This will allow you to take your 1500x1500 pixel image and only display a 500x500 pixel version.
    If you are interested in viewing small details of the large image, consider just displaying a smaller region of interest at a time.
    Let me know if any of these solutions work for you.  Good luck on your application.
    Zach C.
    Field Engineer
    Greater Los Angeles

  • ML: Screen stays black when moving mouse and screen protector kicks in

    This is the second time that this happens to me.
    Setup:
    MBP 5.4
    2 monitors (extended)
    ML 10.8.2 updated to date
    Screen saver kicks in after X minutes
    Require password after Y seconds after sleep / screen saver
    I have set my protector screen to kick in after 10 minutes of inactivity and to turn the monitor off after 30 minutes. Normally, that isn't a problem but today I just happen to move the mouse (trackpad) when the protector screen kicked in, at exactly the same moment.
    The expected behaviour would be that it would go back immediately to my "normal" screen, but instead the screen was just black, I could only see the mouse moving from one side to another. Any key sequence didn't help either. Waiting 5 seconds and than moving the mouse / pressing keys didn't help either. I finally had to hard-reboot the machine. (Pressing power button until it did go out, than boot it as normally).
    What I didn't test was to press alt+cmd+eject key to force sleep (and then wake it again), but either way it should have gone back to my desktop instead of showing just a black screen without it doing anything else.
    I'll be happy to cooperate if you need more information regarding on reproducing this problem.
    Greetings.

     excHi i have exact same problem i turn mine on i see power light hard drive light flashes one time i hear cdrom kick in no sound from speakers no picture so i am assuming no boot mine is toshiba satelite x200 so any help here would be great i have tested memory
    nothing i have this bugger gutted at the moment i do now know after initial turn on the fans turn off after about 5 seconds i dont see nothing broke memory good i am assuming since when i take stick out i get orange flashing light no mater wich stick when i pop em back in it does the above again 

  • When I click on an action, nothing happens unless I keep moving the mouse pointer. This has only happened since I upgraded to version 6. Interestingly, the some situation is with the "SafeCentral" software.

    This happens every time I click on a button or text that does something like, after entering some information then clicking on say, a button to "Continue". The screen freezes and the little symbol on the left hand side of the tab stops rotating, but starts as soon as I move the mouse. If I stop moving the mouse the screen freezes again. I also have installed on my computer the application, '''SafeCentral''', which I know uses Firefox. This problem has only been encountered since I updated to version 6 and also when SafeCentral update the Firefox version they use.
    Wired or what!
    Thank you for any assistance you can offer.
    Regards
    Michael Murray

    Thank you for your prompt reply.
    I think you have identified the problem straight away, well done!
    I first encountered the problem a couple of months ago with an update on Safe Central, (protected environment) software. SC uses the Firefox browser. I won't insult you by explaining what the program does, I'm sure know better that I. I didn't have this problem with Version 5 of Firefox, so I conclude the easiest way to solve this issue would be for me to uninstall v. 6 and reinstall V. 5. As I only use SC for online shopping I can live with this miner irritation. I also notice the Trend Micro Toolbar, though it appears on the Firefox screen, does not monitor the web sites or check email addresses.
    So the TM boffins also have a problem with V.6, but I wager they aren't aware of it yet. Just in closing, I also use Chrome and Internet Explorer that work perfectly well. The problem defiantly lies with Mozilla.
    Kind regards
    Michael

  • Whenever I truy to load a picture or video file, it will stall until I start moving the mouse around. When I stop moving the mouse, it stalls again. I am running Firefox 4.0.1 and Vista

    Any picture or video file I try to load just stalls (with the exception of sound which works OK). I move the mouse and it plays or loads. I stop moving the mouse it stalls again.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Maybe you are looking for