Screen input not getting cleared
Hi All,
I got a peculiar problem,
In my dialog screen(ztcode), i have make a field input enable based on machine and position(Ztable). Now my problem is, when this field gets input enabled im getting some value with this(some 30.12), i really dont know where it is comming from. Even i have cleared this field before endmodule (last stmt in PBO).
Now this looks strange when i jus change my code to screen-input = 0 without anyother modification, its coming disabled with value cleared (0.000). I need to get the value cleared when the input is on. Kindly let me know how to solve this.
if zmach = 'TCE1' and zpos = '01'.
loop at screen.
if screen-name = 'BASE_QTY'.
screen-input = 1.
endif.
modify screen.
endloop.
endif.
cleart base_qty.
endmodule.
Plz its urgent.
Will reward u definetly .
Regards,
Senthil
Hi,
Check in the debugging of when is this getting populated..
Steps
/h in the command field..Switch on the debugging..
Create a watch point on the field BASE_QTY.
Then press F8..It will stop where the field is getting modified..
Thanks,
Naren
Similar Messages
-
JSF: Error Message are not getting cleared
Hi,
I am facing some problem with error messages in JSF.
Here is what I am doing
1. User submits a form, server validates and sends back the error to the client error message added to Faces Context.
2. User checks the messages, changes the input and submits. assuming everything is correct now.
3. On server, it validates and writes data to response for download using the following code.
FacesContext faces = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse)faces.getExternalContext().getResponse();
DownloadResponse.sendDownload( response, is, fileName );
faces.responseComplete();
}4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen.
It seems I am missing something in JSF req-response life cycle. Anyone please point out the mistake.SudhirMongia wrote:
4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen. Wrong. The problem is that the view is not rerendered, which makes sense because you are not sending view content to the browser but your file.
Your real question probably is: how do I cause a file download and still rerender the view afterwards to show the results? To that I myself do not have the answer unfortunately, but I have seen that question come by a few times already, so doing some searches in these forums may yield you an answer. -
Open Item not getting Cleared automatically
Dear Sir,
For a GL "Cenvat Clearing" , we have ticked the option "open Item Management" in FS00 .
Our business scenario is as below :
After MIGO , we do excise posting using J1IEX and here in the posted Fi document the GL "Cenvat Clearing" gets Credited . Subsequently during the MIRO this GL i.e "Cenvat Claering" gets Debited .
My problem is that when I see in FBL3n for this GL the relevant transaction still appear under the open Items . Pl guide me , as what is the reason for this entry not getting cleared automatically .
Regards
B Mittal
RegarPO number cannot be taken as sort feild hence the value is in blank always.
You need to identify some value for this feild and as a process you need to tell your users to incorporate the same at the time of doing MIRO.
Or other wise you can take out the assignment of sort key to this GL account, and as a process you can instruct your user to use reference feild and input a value. If you fell that this is a tedious process,
the Identify another feild that is common for both debit and credit line items and try to post with a common valuie using, one ABAP program which will update this feild. Mind that this feild need to be in the OB74.
reward if useful
sarma -
SOCO requiremnts not getting cleared.
Hello Freinds,
I am working on SRM 5.0 classic scenario( with support pack 11). The requiremnts are not getting cleared although follow on docs are created for them ( PO). This is happening for only goods shopping carts and not for the limit.
Any inputs on this will be highly appriciated.
Regards
SRM USERHi Muthu ,
I have check the code , But i sisnt see any difference , Infact we didn done any change recently . It was working fine beofre support pack and still working fine in another system aftter support pack .this Badi code is same in the both systems .
you can also have look into this code.zsrm_sourcing is a custom table where we are maintaing document type and account assignment catogory for catalog items.
Thank you .
Get details of shopping cart.
CALL FUNCTION 'BBP_PD_SC_ITEM_GETDETAIL'
EXPORTING
i_guid = item_bbp_guid
IMPORTING
E_ITEM = ls_item
ET_ATTACH = lt_attach
TABLES
E_ACCOUNT = lt_account
E_PARTNER = lt_partner.
If lt_attach got any records sourcing needs to be done.
SET SOURCING parameter to 'X'.
IF lt_attach[] IS NOT INITIAL.
SOURCING = 'X'.
EXIT.
ENDIF.
If lt_partner doenst contain a fixed vendor, sourcing
needs to be carried out.
READ TABLE lt_partner TRANSPORTING NO FIELDS
WITH KEY partner_fct = c_vendor. " Fixed vendor
IF NOT sy-subrc IS INITIAL.
SOURCING = 'X'.
EXIT.
ELSE.
If there is a fixed vendor, but item is not assigned to
account assignment category, EXPENSE or INTERNAL ORDER .
Sourcing needs to be carried out for this case.
Load table with sourcing rules
SELECT * FROM zsrm_sourcing
INTO TABLE lt_sourcing.
CLEAR SOURCING.
LOOP AT lt_account ASSIGNING <fs_account>.
READ TABLE lt_sourcing TRANSPORTING NO FIELDS
WITH KEY acc_cat = <fs_account>-acc_cat
skip_sourcing = c_x.
IF sy-subrc IS NOT INITIAL.
SOURCING = 'X'.
EXIT.
ENDIF.
ENDLOOP.
ENDIF. -
HT201412 Touch screen input not responsive.
Touch screen input not responsive. Cannot slide to power off. Appear message "iCloud Backup: This ipad hasn't been backed up in 2 week. Backups happen when this ipad is plugged in, locked, and connected to wi-fi" Touch OK but nothing change. Does follow instruction but nothing works
Thank you for your help.
I did all of trouble shooting procedures but it did not work.
I called Apple Care and explained what kind of problem i had and they booked me up with Genius Bar @ Apple Retail Store.
I went to them last Saturday and they replace my troubled iPhone with the new.
they said it is very rare problem reported so far and i could be the first few ones.
it was no hassle and they all were very kindly listened to me.
anyway, problem solved with replacement and i was lucky to have back up for iPhone.
Anyone has same problem, call 800-MY-IPHONE and book yourself to nearest Genius Bar to get your iPhone served or replaced.
thanks -
Deperaction Area 32 screen is not getting dispalyed in Production Via ABAA.
Hi,
When we are trying to Post the unplanned depreciation on prior-year acquisitions (640) via ABAA, we are getting an error message that Deprecation Area 32 should be Zero, We have check the OADB ( Display view asset accounting: define depreciation area) configuration setting, where Posting to G\L is maintained as u2013 0 (No values are posted in General Ledger). Then we have advised the key user to make the value ZERO for Deprecation 32 when he posts the unplanned depreciation on prior-year acquisitions via ABAA.
But the problem here we are facing in Pre production server (XZB) when we post unplanned depreciation on prior-year acquisitions via ABAA where we are getting THREE Pop window screens like Deprecation Area 02, 32, 90 but when we are doing the same in Production Server (PZB) where we are getting TWO Pop window screens like Deprecation Area 02, 90, Deprecation area 32 pop window screen is not getting displayed, can some help me in resolving this Issue.
Thanks a lot in advance.
Rajesh Kumar Mantrihi,
Check in t-code OABU whether your area allows UP depreciation.The setting in OABU should NOT be contradictory to the
selection made inside the depreciation area .Means,if you select the option "no values allowed" for unplaned depreciation, in the
definition od depreciation area, then it wil overwrite the setting in OABU.
I guess this is the reason fior your issue.
Hope this helps.
Regards
Raghav -
GR/IR Clearing a/c not getting cleared..
Dear All,
My GR/IR clearing account is not getting cleared automatically after Invoice posting..is it the standard behavior or anything
missing?
For example- GR/IR Clearing a/c is 13110100,when GRN is done it is getting credited and once invoice is posted it gets
debited so it should show cleared when we run FS10N / FBL3N
please let me know whether it is needed to clear manually?
NarenHi
F.13 is for executing the setting configured under Financial Accounting -> General Ledger Account -> Business Transactions ->Open item clearing - > Prepare Automatic clearing. In this place, the GL account needs to be updated with the relevant criteria like, what are the fields to be matched for clearing like Reference field, assignment, etc.
After that, if F.13 is executed for this GL account then it will clear based on the criteria specified above.
Hope it clarifies
Regards
Lakshmanan Krishnan -
Vendor Account not getting Cleared.
Dear All,
First of all thanks everyone for your support till date.
I have an issue. When I am trying to clear a vendor account from F-44 its not getting cleared. Its showing a negative balance of Cash discount and is not getting adjusted with any account.
However when I am processing the open item for the same vendor in FBL1N. The total is 0.
Can any one suggest how to go ahead and clear this account.
Thanks & regards
Om Prakash guptaDear All,
Any updates on this issue as it has become a serious problem here. There ia an objection from Auditor.
Kindly Suggest.
Regards
OM -
UWL items not getting cleared after performing action
Hello
We are on EP 7.0.
We are experiencing a strange behaviorin UWL.
When end users receive workitems in their inbox and they take the appropriate actions, the workitems still stay in the inbox. Normally they should no longer appear.
I have tried the refresh in the UWL iview but no luck.
It seems to work in DEV and other landscape. It does no work in Production. The software installation of UWL are the same across all landscapes.
Is there any other setting that is required. In SAP GUI this is not an issue.
Any feedback or tips would be helpful. thanks.
Regards,
SunilHi,
As far as I can remember, this is a known limitation of UWL.
Please, check this thread : UWL work item not getting cleared
I am unsure whether you use the correct button the refresh the UWL (it is well hidden!), check the slide 6 in this document :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6&overridelayout=true
Best regards,
Guillaume -
SD Reversal not getting Cleared
Hi Experts,
When an invoice is getting posted in SD and subsequently when such invoice is cancelled, the line item is not getting cleared. In FBL5n it is showing both the line items as open for all these cases. Please advice
Thanks in AdvanceHi,
VF11 only cancell the invoice and post the reversal document in FI.
First you clear the original document and reversal document manually in FI
use T code F-32 or automatically in F.13
It is related to OB74 setting for this Cusotmer' Recon Acc
please Check the OSS notes 1259505 and Note 400000 -
Not getting cleared with internal working of JSF
Hi All,
I have started with basics of JSF and created some simple apps using netBeans.
However I am not getting cleared with the exact internal working of JSF i.e. how the things are implemented in JSF libraries: jsf-api and jsf-impl.
Please advice or share some links on this.
--SushantHi,
While creating JSP custom tags, we start from scratch by first creating tag handler class then .tld file for that and finally deploying both these files.
I am looking for a similar approach for making our own JSF component.
I don't want to put jsf-impl API into lib directory. Is it possible to make a simple component using jstl standard libraries ?
--Sushant -
DUMMY_BW (0FI_GL_04) delta queue not getting cleared
Hi,
We're using minute based extraction approach for 0FI_GL_04 and thereby have two delta queues for the 0FI_GL_4 extractor in the SAP ERP ECC system: One for the ‘DUMMY_BW’ and the other for the 'real' BI system. The delta queue for DUMMY_BW is not getting cleared automatically in production system and it keeps on adding more records in the queue which is in turn consuming memory in ARFCSDATA. Any thoughts on this would be really helpful.
Regards,
KarthikHi Gurus,
Please help me on how can I check that on what fields 0FI_GL_20 is pulling delta.
I tried to find the MSG Type to check in BD52 for relevant field list, in ROOSGEN table. the entry for MSG type is blank there.
Any help on this is appreciated.
Thanks,
Sourabh Deo -
WCS:- WLC Alarm not getting cleared automatically on WCS
ALarm TAB:-
==========
Severity: Message:
Critical ------------------------------Port 2 is down on Controller.
This Alarm is not getting cleared automatically, Where as the alarms generated for AP's are getting cleared, I would like to know is this the default behaviour or we need to look into some thing here. To clear this i need to manually delete the alarm.
Any help would be greatly appriciated.Alarms are automatically cleared after 7 days. Clear the alarms manually if you want to clear the alarms before 7 days. For more information refer http://www.cisco.com/en/US/products/ps6305/products_qanda_item09186a00807a60f0.shtml#qa11.
-
My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge. Even on long pressing power button - screen doesn't showing anything - not even "needs charging logo".
This is happening only since I have updated to new ios version (ios 8.1).
Is there anyone facing similar issue?? Any suggestion?!?Hi jayla_mora,
Thanks for visiting Apple Support Communities.
It sounds like your iPhone screen is going blank and not responding.
You may find the tips in this article useful for troubleshooting this behavior:
iOS: Not responding or does not turn on - Apple Support
Best Regards,
Jeremy -
I tried to restore from 4.2.1 to 4.3.3 through iTunes my iphone4 was on state after restore it gave error 3194 and my phone got black screen its not getting on what to do to turn on it
http://support.apple.com/kb/TS3694#error3194
Maybe you are looking for
-
How do I set the print area in Numbers?
How do I set the print area in Numbers?
-
Hi, does Cisco provide call center classes with their JTAPI? For instance, i would like to monitor Call center events with the JTAPI application, the same way i can monitor events on Call manager. Regards, Marko
-
Change name of publishedcollection when creating or editing
I need to change the name of the publishcollection when the collection is created or edited. This is to make sure the collection name matchs the name of the one on the remote server. I have tried the following code and it executes ok, but in the end
-
ExecuteUpdate error with mysql
Dear All: i have a wierd error right here, the code is working correctly for the first call to this jsp page but the error come out when second call to this page. the field was update wrongly, credit=credit-1 become credit=credit-2 and Point=Point+1
-
Security Realms, upgrad right in group!
Thank's for your help! Question about my Realm, in the Group operators and Group Adminstrator settings. I am trying to make my group Operator to access some particular pages of my admin console where only group administrator can execute some action.