Screen is big and keeps moving

I cleaned my keyboard, and probably touched some key,
now my imac screen is a little oversized and keeps on moving when I use the mouse.
Anybody knows what I did wrong, and how to stop this?

Are your SEEING settings in UNIVERSAL ACCESS turned off?...

Similar Messages

  • IPad mini keeps clicking when open and green bars highlight and keep moving around the screen

    MY iPad mini when open keeps clicking and a green bar keeps moving around the screen highlighting things, how do I stop it?

    Go to Settings > General > Accessibility > Switch Control and turn this OFF.

  • Screen is big and can't get it to do anything

    everything on the screen is huge and i can't get it to do anything...i've restored it and shut it down and nothing is working

    Like gdgmacguy said. Or Click Settings Icon > General > at bottom Accessability > Zoom turn it OFF.

  • All the letters on the screen became big and the apps and everything. what do i do i get back to normal???

    can someone please tell me what to do?
    when i connected the ipod to itunes everyhting became enlarged alll of a sudden and now i cant see the whole screen.
    How can i fix it???

    Turn Settings > General > Accessibility > Zoom to Off.

  • Iphone 5 Screen is black and keeps vibrating on charge

    Hi, the other day I replaced my iphone 5 screen and it was working up until last night when I noticed a gap between the glass and the housing up the top of the phone, i opened the phone, thinking that I hadnt put the screen in properly, I repositioned the screen and closed the phone but now for some reason the phone wont turn on with a hard reboot or normal turn on. When I plug the phone into the charger it just constantly vibrates, would you have any idea what the cause is? I think I may have damaged one of the screens flex cables but I cant find any damage

    Did you found a solution yet?

  • My iPod screen is white and keeps turning back on white

    My iPod Touch screen has gone white, I am able to turn it off and sometimes use the touch screen but it always comes back white even when I restart it. I have tried to turn it off which I am able to but the screen comes back white. I sometimes can use the touch screen but I can't see what I'm touching. This happened after I dropped my iPod. My iPod is 4th generation, not jail broken or anything. The screen has had a problem of not sticking to the interieur of the iPod ever since I had to replace the cracked screen. What could I do to get it back to the way it was?

    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. However, then may be unwilling to do anything since you took it apart. Problem could be due to a loose connection or something is broke.
    Apple Retail Store - Genius Bar                                     

  • Sometimes my download "freeze", but when I move and keep moving my mouse cursor into the small download window it runs again, if I stop moving it, it stops. So instead of keeping moving my mouse endlessly I choose to restart Firefox and then it works.

    this occur with megaupload download (which represents 99% of my downloads)
    And this occur from time to time maybe 1 every 20 dnloads or more, and maybe when this happens I have 4 or five windows opened. I use FF4 but with version 3 I had the same problem.
    It feels like a bug
    Thanks
    Joey

    Right-mouse on the Synaptics toolbar icon  to bring up Mouse Properties, select the Device Settings tab, press Settings to bring up Properties for Synatpics ClickPad, on the left open Pointing... Sensitivity... Palm Check.  This is a feature to prevent accidental touchpad movement by your palm while you're typing.  So it prevents use of the touch pad when keys are directly used.
    Good luck!

  • When using Facebook thr Firefox the screen size is too big and cannot find way of reducing it to fit for seeing and reading?

    When I open Facebook the print is very large and the page does not fit the screen so need to keep moving back and forth across to be able to read it. It was not like this before.
    Please can you find a solution for me
    Thank you

    See this: <br />
    https://support.mozilla.com/en-US/kb/Page+Zoom

  • Installed Mountain Lion really white screen then message error keeps rebooting

    Mountain Lion white screen error message and keeps rebooting.

    I'm not sure if this will help, but I was having a similar problem. I unplugged my external hard drive and it seems to have resolved the problem

  • I turned on my Mac and the screen stays white and nothing ever shows up., I turned on my Mac and the screen stays white and nothing ever shows up.

    I have a 3 year old imac and turned it on the other day and the screen stayed gray and never moved away from it.  Any suggestions on things to try?

    Click on > Mac OS X: Gray screen appears during startup and follow the troubleshooting steps.

  • Startscreen too big and not reacting right

    Start-screen too big and can't login?
    Here is how to fix it:
    I received the new Air a few weeks ago. It has that new magnifying-feature and a few days ago it magnified the whole start-screen, so I couldn't login. Since I don't use the feature, and didn't recognized my problem as related to the magnifying-feature, I was stuck for several days where I couldn't recover my device through iTunes.
    Finally calling support I was told, that I had to let it run out of batteries. With a fully loaded battery and nothing to do on my iPad, that would properly take me several days.
    My husband googled the Internet and found out, that the magnifiyng-feature can be disabled by double-touching the screen with three fingers. And that worked!
    /Sorry for my poor English, hope it will make sense anyway.

    Your English is fine and your husband found the exact right method. If you don't want your screen to enlarrge you can turn it off by going to settings> general> accessibility> zoom> off.

  • Ipad mini screen keeps moving around and switching screens as though someone else is using it? any ideas what is going on?

    Ipad mini screen keeps moving around as though someone else is fiddling with it while I am using it. Any ideas what is goi g on?

    Hi Deeveeay,
    Try resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). When the Home screen redisplays, see if the issue has resolved itself.
    Cheers,
    GB

  • My web page at 100% is too big for my screen, at 75% it's kinda hard to read. Can I get it to like 85% and keep it there permatly. Now I have to take time to change it on every page! Thanks.

    Every time I cahnge web pages I have to stop and resize to 75%, ehich is a little small. But 100% won't all fit my screen. Can I get to like 80 or 85% and keep it like that so I don't have to resize every page? Thanks.

    Which add-on did you install that shows you the percentage for page zoom?
    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox and there's no display of zoom %.
    Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • Screen not displaying correctly. It keeps moving as the mouse moves

    Screen not displaying correctly. It keeps moving as the mouse moves

    Your problem is not the same as that of the original poster of this thread, and it can be very confusing for everybody if we try to answer more than one question in each thread.
    In order for us to give your problem our undivided attention to try to solve it, would you kindly start your own thread, describing the trouble you are having in the fullest detail, including completing your details to show what Mac or iDevice you are using, what operating system, and what version of the application in question. Please remember to post in the forum relevant to your hardware or version of OS X.

  • My mouse keeps moving the screen around.  How do I reanchor it

    My Mouse keeps moving my screen around.  How do I re-anchor it?

    Goto trackpad in sys pref and try reducing your tracking speed or goto universal access in sys pref and check the mouse and trackpad settings...try altering them to solve your problem

Maybe you are looking for

  • MediaSource - functionality & playli

    Dear all i have a Zen Touch 40Gb, a large music library and a number of gripes. i apologise in advance for the length of my post but i'd be really grateful for any advice you can send my way. i've searched through a large number of similar threads on

  • Error while deploying map: ORA-00942 Table or view does not exist

    Hi OWB experts, I'm having yet another problem with OWB, this time when I try to deploy a mapping I get this error: ORA-06550: line 59, column 3: PL/SQL: ORA-00942: table or view does not exist DIM_01_ESTCON_MAP ORA-06550: line 93, column 3: PL/SQL:

  • Error while running disco report (Help needed urgent)

    Hello All, When i am running a disocoverer report i am getting the following error. ORA-01840 input value not long enough for date format ORA-02063 preceding line from prod The data retrieved by the query is incomplete because it was canclled? Kind R

  • BUG: 1.4.1 beta doesn't like to be in an IFRAME that moves.

    If you are using 1.4.1 beta in an IFRAME which position can be moved by javascript for instance, the plugin will grey out and not refresh. 1.4.0 work perferctly in this regard.

  • Forwarding of Work Item from Approver's Inbox

    Hi All, We are in SRM 5.0 SP07 Classic Scenario. We have a requirement of restricting forwarding of work items from approver's inbox to users who do not have a approver's role. Presently, when the system takes in a user ID who is having a requisition