Screen is black on macbookpro

using macbook pro and screen went blank.. have tried several options to troubleshoot..nothing seems to work... any ideas?

"Mac friends"
The best kind!
"had said they were super reliable. "
In general they are but we have had our dogs over the years.
"late 2014 MacBookPro"
So you should still be under warranty. Take it back to the Apple Store and make them fix it.

Similar Messages

  • My 2yo MacBookPro comes on but the screen is black and blank. After about 30 seconds it powers down. Any ideas?

    my MacBookPro comes on but the screen atys black and blank. After about 30 seconds, it shuts down. Itx less than 2 years old and has very few hours of use.
    anyone one have any ideas?
    katherine

    If you have attempted the reset, which is holding the home button and sleep/wake button, was it still connected to the computer? Have you tried to do that when not connected. You stated it never came on, how long did you hold the buttons together? If you cannot get it to connect to iTunes then you would not be able to restore the device. You can see if you can put the device into Recovery Mode by following the instructions in this support document. If that does not work, then you are correct, make an appointment at the Apple Store. If you can't update or restore your iOS device

  • Help! MacbookPro screen went black

    I am lost, my computer was on sleep mode and I went to turn it back on and the screen went black even though I could see a faint view of my screen in the background of the black screen, it was also making a lot more noise than normal so I turned it off and then it wouldn't boot up. It would start too for about 2 seconds, literally, and then the screen would go back dark. I took it to be fixed and had the hardrive replaced but it won't work. Is my computer a lost cause, is my motherboard damaged? Help ... What can I do I need it for school!

    Apparently the folks who fixed it didn't. So take it back.

  • HELP! When I shut my MACBOOKPRO then open it my screen goes black.

    PLEASE HELP ME!
    Ok so when I shut my 13 inch Macbook Pro the screen goes black. I can move the curser and I still hear music being played. When it is shut I can hear videos and music being played aswell. I have never dropped my laptop and it is excellent condition. I am scared I have broken it, what can I do?
    Thank you soo much

    It sounds like you have a defective sleep switch.  There is a magnet in the lid which comes into close proximity to a sensor on the battery status board cable when you close the lid.  This sensor tells the computer to sleep.  This is a common problem.
    Take it to an Apple Store or repair shop.  They can diagnose it for sure.
    -Joseph Kouyoumjian
    MicroReplay

  • Have a MacBook Pro. the computer will not boot up, the screen has black and white stripes and multi color bands as well.

    Have a MacBookPro. The computer will not boot up. the screen has black and white bands with multi color bands as well.

    Yeah it's dead. Take it to an Apple Genius Bar and have it checked out. Then buy a new one.

  • IMessage in Mavericks - the screen goes black

    the screen goes black if I am not using it. Messages works fine, but it's annoying to have to click on the window to get the screen from black to text

    Hi,
    Use CMD+Shift+ 4 anf the scribe round the window (with some other space around it) and then use the camera icon in a Post to navigate to it (the Screen grab should be on your Desktop) and post a pic here please.
    You may want to use Preview or some other app to anonymise any info shown.
    I can't say I have heard of this.
    10:08 pm      Thursday; March 13, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Screen goes black when hooking up to TV via mini-DVI to video adapter...

    Hello,
    Ever since I upgraded my PB12" to 10.5.x (now running 10.5.5, but this issue has been there since upgrading to 10.5.1), when I hook up the mini-DVI to video adapter (different adapter than for hooking up to an external display as the mini-DVI to video adapter has composite and sVideo out) to my TV, the PB screen goes black. It's set up to mirror the PB on the TV, and the PB continues to run, picture works on the TV, but I loose picture on the PB. Only way to get it back is to reboot the PB (with the mini-DVI to video adapter unplugged). So, basically, if I try and use the mini-DVI to video adapter, I loose picture on the PB. This never happened under 10.4.x — only since upgrading to 10.5.x.
    Anyone have this issue? Know of a fix?
    Thanks,
    Kristin.

    If you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.
    If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that can combine video and audio to HDMI.
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

  • My ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!

    my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!

    Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
    Message was edited by: michael08081

  • Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!   What should I do?

    Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
    What should I do?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

    IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

    It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

  • Itunes makes my screen go BLACK and restart- will not work at all!

    hello fellow apple distressers,
    hoping someone can help me as i would really appericiate it:):)!
    everytime i try and open itunes my computer freezes then the screen goes black. after the screen goes black the computer restarts all on its own! when i log back into windows, after it has restarted, it tells me it has recovered from a +serious error+. when i searched for more information it gave me this error signature:
    BCCode : 100000ea BCP1 : 8A1357A8 BCP2 : 8A0AD290 BCP3 : F78BACB4
    BCP4 : 00000001 OSVer : 512600 SP : 3_0 Product : 768_1
    i have tried uninstalling and reinstalling itunes annnddd quicktime, but still itunes refuses to co-operate, although funnily enough quicktime does work....
    please help as i really need itunes to upload songs on to my ipod.
    Btw, this happened after a virus and although this virus has been removed from the computer i think it may have damaged the itunes files:(
    thanking you for reading this,
    lovelifesmilepeace

    wow blue screen of death that sounds bad...
    Technically they're called STOP messages (because the PC stops after you get one of them). But "blue screen of death" (or BSOD) is the common terminology (because the PC stops after you get one of them).
    C:\DOCUME~1\Abigail\LOCALS~1\Temp\\WERfd36.dir00\Mini012710-01.dmp
    Good ... we've got the PC generating minidumps of the crashes. So we'll be able to interrogate those using Windows debugging tools to try to work out what is causing the crash.
    First, track down where they are being stored on the PC. Usually that will be in the C:\Windows\Minidump\ directory. There should be files in there with names like "Mini(number-numbers).dmp"
    (If you have "Hide filename extensions for known file types" enabled in Windows, the ".dmp" extension may not appear on the dump files. The numbers in the file name will be different for each minidump, if minidumps are present.)
    Once you've found where they're being stored, we'll have a look at them using windbg.
    1. Download and install the Windows debugging tools from here:
    http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
    2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
    Once you open Windbg, you will presented with a blank screen.
    3. Click on "File > Symbol File Path". Here you will enter the symbols
    path. Symbols are needed to effectively debug.
    The path will be:
    SRVc:symbolshttp://msdl.microsoft.com/download/symbols
    4. Enter in this path and click OK. Now, go to "File > Save Workspace"
    so that your symbols path is saved for future use.
    5. Go to "File > Open Crash Dump" and load the file.
    (An "Open Crash Dump" screen will appear ... doubleclick "My Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
    You will/should get a message to save base workspace information. Choose no.
    Now you will get a debugging screen. It takes a little bit to run it,
    as the symbols have to be downloaded as they are needed.
    After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash. (It'll say "Probably caused by" ...)
    Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
    If you can, have a look at several of your crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps?

  • My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?

    My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
    I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse.  I'll be working on my computer and the thing will freeze.  When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally.  Then I try safe mood and it will then boot just fine.  But there are blue stripes on my screen.  The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes.  I haven't tried reinstalling my software because I don't have the startup discs that came with my computer.  If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed.  I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either. 
    Does anyone else have experience with this?  Is it the firmware or what?  I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
    Please help... Thanks!

    I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them  the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

  • Mid 2010 MacBook Pro crash - screen goes black

    There is a major problem with the mid 2010 Mac Book Pro's and Lion.  I suspect that it is related to the drivers for the NVIDIA GeForce GT 330M 512MB video card and perhaps the i7 processor.  The crashes are random and most often occur after a mouse click then the screen suddenly goes black and a restart is forced.  There is a thread on MacRumors that describes many others with the same problem: http://forums.macrumors.com/showthread.php?t=1182104
    The crash occurs less frequently when the power and external monitors are connected.  When the MBP is unteathered it crashes every 20 minutes.  I am really surprised and disappointed that a bug this severe made it through final testing. Looking forward to 10.7.1.
    Scott

    im so glad im not the only one with this problem. at least i know its not because some careless things i unconciously did that makes my mac gone berzerg like this.
    i also encounter the exact same problem with all of you. problems started a month ago. at first it was just once in a while then it became a frequent thing especially when my battery left with 20-30%. then after i plugged in the magsafe, its okay. lately, nothing safes the mac from crashing, particularly when im running adobe and/or autocad. i thought it was software problems so i backed up my files, performed erase and install snow leopard then made an even bigger mistake by upgrading to lion. after finish upgrading, the crashings got even more often. every starting up, after i got a glimpse of login in, pufffttt, screen goes black but keyboard still on. googled it up and say reseting smc will do the trick. eeekkkk nothing! then resetting the pram. worked okay for quite some times then puufffttt, crash! ask a question on yahoo answers and got a help from lovely person to install gfsxcard-something and told to opt for integrated only. worked fine for 2 days and still went back to crashing. opened up the mac, testing each rams, reshuffling em, still got nothing. the only thing that enables me to do my work with this Majestic mac is resetting pram everytime i turn it on.
    since im living in singapore (bought this mac june'09 in melbourne,australia), there is no genius bar to be found, running a diagnostic only at any apple service cost me 120 bucks and if i have to change the logicboard, its gonna cost me ard 1000++ dollas since i dont have any applecare and my warranty expired 4mnths ago. so, i might be killing myself soon! yauuzaaaa

  • Why does my screen turn black when I play iTunes while working on iPhoto?

    Why does my screen turn black when I play ITunes while working on iPhoto? I can't click off of the screen but get a message that reads Shut down computer by pressing button in back then turn computer back on by pushing button in back. That's followed by Chinese letters (which I cannot read). I have had other problems when playing iTunes (actually, a radio station on the Internet) while working on  iPhoto. Before, I got a window that would pop up and tell me I had no disk space available, that I would have to quit applications that were open. Not many were open.
    It would be nice if I could solve this problem once and for all.
    Thanks in advance for all the suggestions. I truly appreciate your help.
    Jan

    That was easy. Thanks. Jan
    Interval Since Last Panic Report:  1949305 sec
    Panics Since Last Report:          1
    Thu Feb  6 15:29:32 2014
    panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d89ff3, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0xffffff7acd4a2a7c, CR3: 0x0000000085d3b000, CR4: 0x0000000000000660
    RAX: 0xffffffff4bffff56, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000
    RSP: 0xffffff807867b7c0, RBP: 0xffffff807867b800, RSI: 0xffffff7acd4a2a7c, RDI: 0xffffff8065292000
    R8:  0x0000000000000001, R9:  0x0000000000000000, R10: 0xffffff7f81d44200, R11: 0xffffff800f8b45e8
    R12: 0xffffff8065292000, R13: 0xffffff807867b860, R14: 0x0000000000000001, R15: 0xffffff7acd4a2a7c
    RFL: 0x0000000000010286, RIP: 0xffffff7f81d89ff3, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0xffffff7acd4a2a7c, Error code: 0x0000000000000000, Faulting CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff807867b470 : 0xffffff8000220792
    0xffffff807867b4f0 : 0xffffff80002c4794
    0xffffff807867b6a0 : 0xffffff80002da55d
    0xffffff807867b6c0 : 0xffffff7f81d89ff3
    0xffffff807867b800 : 0xffffff7f81d8a694
    0xffffff807867b890 : 0xffffff7f81d8b4ed
    0xffffff807867b8d0 : 0xffffff7f81d472a1
    0xffffff807867ba40 : 0xffffff7f81d8bd6d
    0xffffff807867bb00 : 0xffffff7f81d44346
    0xffffff807867bb60 : 0xffffff8000655f3e
    0xffffff807867bb80 : 0xffffff800065681a
    0xffffff807867bbe0 : 0xffffff8000656fbb
    0xffffff807867bd20 : 0xffffff80002a3f08
    0xffffff807867be20 : 0xffffff8000223096
    0xffffff807867be50 : 0xffffff80002148a9
    0xffffff807867beb0 : 0xffffff800021bbd8
    0xffffff807867bf10 : 0xffffff80002af140
    0xffffff807867bfb0 : 0xffffff80002dab5e
          Kernel Extensions in backtrace:
             com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d390 00->0xffffff7f81dfbfff
                dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 b0000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f8089e000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80865000
    BSD process name corresponding to current thread: iPhoto
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: iMac10,1 (Mac-F2268CC8)
    System uptime in nanoseconds: 11526391261403
    last loaded kext at 23020191300: com.apple.driver.AppleHWSensor    1.9.5d0 (addr 0xffffff7f8234b000, size 28672)
    last unloaded kext at 522057763087: com.apple.driver.AppleFileSystemDriver    13 (addr 0xffffff7f8254c000, size 12288)
    loaded kexts:
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AppleBluetoothMultitouch    70.12
    com.apple.filesystems.autofs    3.0
    com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
    com.apple.driver.AudioAUUC    1.59
    com.apple.driver.AppleMikeyHIDDriver    122
    com.apple.driver.AppleHDA    2.2.5a5
    com.apple.driver.AppleUpstreamUserClient    3.5.9
    com.apple.driver.AppleMikeyDriver    2.2.5a5
    com.apple.driver.AppleBacklight    170.2.2
    com.apple.driver.AppleMCCSControl    1.0.33
    com.apple.driver.AppleLPC    1.6.0
    com.apple.driver.AGPM    100.12.75
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AudioIPCDriver    1.2.3
    com.apple.driver.ApplePolicyControl    3.1.33
    com.apple.GeForce    7.3.2
    com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
    com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.8f17
    com.apple.driver.AppleUSBCardReader    3.0.6
    com.apple.driver.AppleIRController    312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.iokit.SCSITaskUserClient    3.2.1
    com.apple.iokit.IOAHCISerialATAPI    2.0.3
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.1.0
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleFWOHCI    4.9.0
    com.apple.driver.AirPort.Atheros40    505.67.1
    com.apple.driver.AppleAHCIPort    2.3.1
    com.apple.nvenet    2.0.17
    com.apple.driver.AppleUSBHub    5.1.0
    com.apple.driver.AppleUSBEHCI    5.1.0
    com.apple.driver.AppleUSBOHCI    5.1.0
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.4
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
    com.apple.driver.AppleMultitouchDriver    231.4
    com.apple.driver.IOBluetoothHIDDriver    4.0.8f17
    com.apple.kext.triggers    1.0
    com.apple.iokit.IOSerialFamily    10.0.5
    com.apple.driver.DspFuncLib    2.2.5a5
    com.apple.driver.AppleBacklightExpert    1.0.4
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.driver.AppleSMBusPCI    1.0.10d0
    com.apple.iokit.IOSurface    80.0.2
    com.apple.iokit.IOAudioFamily    1.8.6fc18
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.driver.AppleGraphicsControl    3.1.33
    com.apple.driver.AppleHDAController    2.2.5a5
    com.apple.iokit.IOHDAFamily    2.2.5a5
    com.apple.nvidia.nv50hal    7.3.2
    com.apple.NVDAResman    7.3.2
    com.apple.iokit.IONDRVSupport    2.3.4
    com.apple.iokit.IOGraphicsFamily    2.3.4
    com.apple.iokit.IOFireWireIP    2.2.5
    com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
    com.apple.driver.IOPlatformPluginFamily    5.1.1d6
    com.apple.driver.AppleSMC    3.1.3d10
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
    com.apple.iokit.IOBluetoothFamily    4.0.8f17
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.1
    com.apple.iokit.IOUSBMassStorageClass    3.0.3
    com.apple.iokit.IOUSBHIDDriver    5.0.0
    com.apple.driver.AppleUSBMergeNub    5.1.0
    com.apple.driver.AppleUSBComposite    5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
    com.apple.iokit.IOFireWireFamily    4.4.8
    com.apple.iokit.IO80211Family    420.3
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOUSBUserClient    5.0.0
    com.apple.iokit.IOUSBFamily    5.1.0
    com.apple.driver.NVSMU    2.2.9
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.11
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.DiskImages    331.7
    com.apple.iokit.IOStorageFamily    1.7.2
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.7
    com.apple.iokit.IOACPIFamily    1.4
    System Profile:
    Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: ST3500418ASQ, 500.11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GA11N
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0608, 0x26200000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
    USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0x06400000 / 3
    USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0x06430000 / 4
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 6

  • Help! My iPad's screen is black and unresponsive, but when I plug it in I can hear it make the noise it normally would. I'm unsure what to do and I've been looking all over the internet for solutions and so far none are working.

    As I mentioned, the screen is black and unresponsive. However when ever I plug it into either my charger or my lap top it will make the expected sounds, it also [when plugged into my computer] opens up iTunes how ever the device can't be seen on the side bar. So far to resolve the issue I've tried.
    - Attempting to turn it on
    - A reset using the home/sleep button and the power button
    - Plugging it into my computer to see if I can get it working through iTunes [Which so far is fruitless]
    - Holding 3 fingers down in the screen in case my screen curtain was enabled [Nothing happened with that either]
    - Putting it face down over my knee and slapping the back in case a cable was lose [Done this repeatedly and nothing happened]
    I don't know what's wrong with it and I've been searching for solutions for about 2-3 hour's now. I'm hoping someone here might be able to help me as I would like to go through as many options as possible before trying to take it into the apple store.
    [Side note I had also just updated my iPad two nights before the problems began to occur to the iOS 8 technology.My version of iPad is the iPad 2 with 16GB of memory. I'm not sure how much information will be relevant but I'll give as much as possible is someone is able to help me.]

    Apple does not replace screens and your iPad is clearly out of warranty, not that accidental damage would be covered anyway.  If you want to try to have your iPad fixed, there are 3rd party repair centers you can try.  In your google search bar type the following:
    "ipad repair "xxxxx"
    Put your city in the "xxxx"  for example, "tampa, fl"
    There will likely be some options you could investigate.
    Or, you could sell your iPad, even damaged to Gazelle.com and get yourself a shiny new iPad.  And if you do, make sure you add AppleCare+ for $99.  This not only increases your Apple technical support for two full years, but would get you up to two iPad replacements at $49 each.

Maybe you are looking for

  • Imac 27" 2012 Mountain Lion running very hot

    Please help. My 27" IMac running very hot, especially top left corner. Is there a fix. Tony R

  • TB Display

    My TB display flickered twice and died this morning, no reset button just ran out of warranty, any suggestions?

  • Get instance name

    Hello Is there any dynamic way to obtain an object's instance (variable) name? For example: Object myObject = new Object(); System.out.println( "The object's name is: " + someMethod() ); And the output would be: The object's name is: myObject Thanks

  • Help me,Mass Changes to Reference Rate Routing

    Hi, I need to mass changes to reference rate routing. but i don't know how to do it. by using CA85N i was able to make changes to Normal routing but not reference rate routing. so.so.so. i need your helps. best regards. thanks.

  • Harman Kardon BT noise problem.

    i need to know if my HARKAR BT headphones have a problem. 1 or 2 second right after playing any sound or music in the headphones in wireless mode you can hear an audible noise of interference in the right speaker. I want to know if this is a known an