Screen is black, screen is black
Just bought my computer 2 months ago. Came home ... send an email... closed my computer then woke up the next day and the screen is black. The keys still light up and the volume buttons are still makeing sounds. Tryed to restart the computer with option, command, p and r. Still nothing. Also tryed putting it on safe mode... still nothing. Im in the navy and there is no apple store where I'am at at the moment. Any sugestions?
Can you boot into Recovery (command-R at startup)? If not, it's a hardware fault.
Similar Messages
-
Screen goes black when hooking up to TV via mini-DVI to video adapter...
Hello,
Ever since I upgraded my PB12" to 10.5.x (now running 10.5.5, but this issue has been there since upgrading to 10.5.1), when I hook up the mini-DVI to video adapter (different adapter than for hooking up to an external display as the mini-DVI to video adapter has composite and sVideo out) to my TV, the PB screen goes black. It's set up to mirror the PB on the TV, and the PB continues to run, picture works on the TV, but I loose picture on the PB. Only way to get it back is to reboot the PB (with the mini-DVI to video adapter unplugged). So, basically, if I try and use the mini-DVI to video adapter, I loose picture on the PB. This never happened under 10.4.x — only since upgrading to 10.5.x.
Anyone have this issue? Know of a fix?
Thanks,
Kristin.If you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.
If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that can combine video and audio to HDMI.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2 -
HAVE NEW 13.3 MAC AIR (previously, still have 13.3 MCbook pro which works captures what I am looking for an answer to)
when i open sites in safari the page opens fine if it is not a pdf based page.
Once i open a site that has a link to another page that is a pdf based page the page comes up as a black screen with no info showing
If I open a site that gices me an open to save a file to a word, excel type document or a pdf , everything works fine until I try to save the information to a PDF and again the screen goes black
I have tried the safari help site but to no avail, does anyone have a solution to thid problem. (I do have the abode ofr mac program loaded)If you delete all the Adobe Reader stuff it will probably fix this. For almost everything, the Apple pdf handling works better.
-
Hello,
I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
Thanks ever so much for your advice!
Lillibet
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 9:53 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2012) (Technical Specifications)
MacBook Air - model: MacBookAir5,2
1 1.8 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 0:22:41
Disk Information: ℹ️
APPLE SSD SM256E disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple Inc. Apple Keyboard
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/WD +TURBO Installer.app
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.USB-64HP (1.0.3) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.14) [Click for support]
/System/Library/Extensions
[not loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
[loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Agents: ℹ️
[running] com.mcafee.menulet.plist [Click for support]
[running] com.mcafee.reporter.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[failed] com.apple.spirecorder.plist
[running] com.mcafee.ssm.Eupdate.plist [Click for support]
[running] com.mcafee.ssm.ScanManager.plist [Click for support]
[running] com.mcafee.virusscan.fmpd.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
TouchP-150M Application (/Applications/Canon P-150M/TouchP-150M.app)
iPhoto Application (/Applications/iPhoto.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
JavaAppletPlugin: Version: Java 8 Update 45 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
FUSE for OS X (OSXFUSE) [Click for support]
Java [Click for support]
MacFUSE [Click for support]
NTFS-3G [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
Destinations:
My Passport Edge for Mac [Local]
Total size: 499.94 GB
Total number of backups: 27
Oldest backup: 2013-01-31 21:15:26 +0000
Last backup: 2015-05-02 11:33:09 +0000
Size of backup disk: Adequate
Backup size 499.94 GB > (Disk used 82.42 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
3% fontd
2% VShieldScanManager
0% taskgated
0% notifyd
Top Processes by Memory: ℹ️
745 MB Google Chrome Helper(8)
439 MB kernel_task
246 MB VShieldScanner(3)
160 MB Google Chrome
127 MB Finder
Virtual Memory Information: ℹ️
130 MB Free RAM
3.87 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
May 2, 2015, 09:30:08 PM Self test - passed
May 2, 2015, 08:52:59 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
May 2, 2015, 09:28:53 AM /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
May 1, 2015, 05:45:24 PM /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
May 1, 2015, 05:38:54 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
May 1, 2015, 05:38:43 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
May 1, 2015, 05:38:32 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
May 1, 2015, 05:38:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
May 1, 2015, 05:38:10 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
May 1, 2015, 05:38:00 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
May 1, 2015, 05:37:49 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
May 1, 2015, 05:37:38 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
May 1, 2015, 05:37:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
May 1, 2015, 05:37:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
May 1, 2015, 05:37:06 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
May 1, 2015, 05:36:55 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
May 1, 2015, 05:36:44 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
May 1, 2015, 05:36:33 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
May 1, 2015, 05:36:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
May 1, 2015, 05:36:17 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
May 1, 2015, 05:36:01 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
May 1, 2015, 05:35:50 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
May 1, 2015, 05:35:39 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
May 1, 2015, 05:35:28 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
May 1, 2015, 05:20:29 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
May 1, 2015, 04:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
May 1, 2015, 02:53:58 PM /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
Apr 20, 2015, 09:31:20 PM /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
Start-up problems, black screen or open firmware
My iBook G4 1.33GHz Dual USB, with 1 gb RAM memory has been troublesome lately. It's installed with the latest version of OS 10.4.9
When starting up the ibook, it will sometimes only show a black screen after the boot chime. Repeated force restart sometimes makes it boot up the open firmware (white screen).
Then I see the error message:
"Illegal instructions at: %SRR0:ff85e778 %SRR1:00081000"
When I continue on with "mac-boot", I get the blue screen with a question marked box. So it can't find the startup disk.
This usually only happens when I'm done working for the day and close the lid on my ibook without manually clicking on the sleep mode when I put in in my drawer,. I've seen several times that the screen is still on when I close the lid, so it will continue to burn battery time.
I've managed to get the ibook to boot properly after removing the battery and letting it "cool-down" for 15-20 min. Also, zapping pram, vram sometimes works, but I don't know how much that actually helped. It worked once when I typed in the reset-nvram in the open firmware screen too.
I'd rather not have this happen at all! Any suggestions? Is this the much-talked about RAM memory failure?
Any suggestions would be very appreciated.
Message was edited by: antony chenHI,
*"I get the blue screen with a question marked box."*
That can mean several things. One, the drive is failing. Two, your iBook can't find a System Folder to boot from. Try booting while holding down the Option key which will prompt the Startup Manager window.
MemTest
Boot from your install disk and check the hard disk for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 15% free disk space. Not enough disk space can cause directory corruption.
If you cannot boot from your install disk, try booting in Safe Mode
A flashing question mark appears when you start your Mac
Carolyn -
My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?
DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money. -
right now it is the middle of april and i bought the ipod at the beging of Agust the year befor so it still has not been a year. currently it is thursday and the screen changed to the white and black corner on the monday earlier in the week (so 4 days ago). i had just broken up with my gril friend and we were fighting. in anger i through my ipod at the wall. i was aiming for my pillow on my bed so it would hit something soft but i missed and it hit the hard concrete wall in my room. when i looked at my ipod it had turn itself off and when turn on the screen was white with a little black in one corner. i have tryed to restart it by holding down the power and home button till it restarted but the screen only got brighter and then eventually went back the the brightness it was before and turn off. i can still turn the screen on but cant unlock. i know it is still working cause my alram still goes off in the morning. the ipod is a 4th generation ipod touch 16 GB memory and is black. can this be fixed at home on my own or do i have to take it in to apple. can apple even fix it or is my ipod past the point of repair. any advice would be nice. thanks in advance.
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $99 fr a 16 GB 4G. They do not fix yours.
Apple - iPod Repair price -
A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.
Hi 22chill,
I recommend that we delete and re-download the movie from your purchase history:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M. -
as of today when i plug my 7th generation ipod that i just got for christmas 2012 my pc shuts down to a blue screen with alot of writing then to black screen with alot of writing then to an all black screen then and windows error message my computer is ingood condition no malicious malware and has been clean i need help
thank ycjlet me get back with the answer with what the messages say on the blue screen and the black screen if i can read them fast enough before it shuts down i have windows 7 professional
-
[solved]black screen with xorg 1.6 after resume (intel)
after upgrading to xorg-server 1.6 no matter if i use s2ram or s2disk, first resume works fine, the second suspend and resume results in a black screen without any chance to swich to any tty.
i have read about bug like this which was resolved with using intel legacy driver. however my problem still occures.
maybe there is some module i should load/unload/reload on hibernate/wake-up?
here is my xorg.conf, lspci, Xorg.0.log.old (the one i had to kill with black screen) and Xorg.0.log
xorg.conf
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Cursor" "SendCoreEvents"
InputDevice "Stylus" "SendCoreEvents"
InputDevice "Eraser" "SendCoreEvents"
EndSection
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "Mode" "Absolute"
Option "BottomY" "18432"
Option "BottomX" "24576"
EndSection
Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "TPCButton" "off"
Option "BottomY" "18432"
Option "BottomX" "24576"
Option "Mode" "Absolute"
EndSection
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "BottomY" "18432"
Option "BottomX" "24576"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "xtrap"
Load "dbe"
Load "dri"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "base"
Option "XkbModel" "pc105"
Option "XkbLayout" "de, ru"
Option "XkbVariant" "nodeadkeys, winkeys"
Option "XkbOptions" "grp:caps_toggle"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "FramebufferCompression" "on"
Option "AccelMethod" "EXA"
Option "Tiling" "on"
Option "TrippleBuffer" "true"
Option "MigrationHeuristic" "greedy"
Option "RenderAccel" "true"
Option "ExaNoComposite" "false"
Option "EnablePageFlip" "true"
Option "DRI" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "dri"
Mode 0666
EndSection
lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
Xorg.0.log
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:54 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Cursor"
(**) |-->Input Device "Stylus"
(**) |-->Input Device "Eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/local,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "DRI" "on"
(**) intel(0): Option "FramebufferCompression" "on"
(**) intel(0): Option "Tiling" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xA0080000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xa0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
(II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
(II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
(II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "TrippleBuffer" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "EnablePageFlip" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de, ru"
(**) Keyboard0: XkbLayout: "de, ru"
(**) Option "XkbVariant" "nodeadkeys, winkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
(**) Option "XkbOptions" "grp:caps_toggle"
(**) Keyboard0: XkbOptions: "grp:caps_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "SendCoreEvents"
(**) Cursor: always reports core events
(**) Cursor device is /dev/ttyS0
(**) Cursor is in absolute mode
(**) Cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Cursor: keeps shape
(**) Option "BottomX" "24576"
(**) Cursor: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Cursor: bottom y = 18432
(**) Option "BaudRate" "9600"
(**) Cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Stylus: always reports core events
(**) Stylus device is /dev/ttyS0
(**) Stylus is in absolute mode
(**) Stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Stylus: keeps shape
(**) Option "BottomX" "24576"
(**) Stylus: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Stylus: bottom y = 18432
(**) Stylus: threshold = 15
(**) Stylus: max x set to 24576 by xorg.conf
(**) Stylus: max y set to 18432 by xorg.conf
(**) Stylus: max z = 255
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(**) Stylus: serial speed 9600
(II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
(==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Eraser: always reports core events
(**) Eraser device is /dev/ttyS0
(**) Eraser is in absolute mode
(**) Eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Eraser: keeps shape
(**) Option "BottomX" "24576"
(**) Eraser: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Eraser: bottom y = 18432
(**) Eraser: threshold = 15
(**) Eraser: max x set to 24576 by xorg.conf
(**) Eraser: max y set to 18432 by xorg.conf
(**) Eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) Eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
(==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) config/hal: Adding input device ThinkPad Extra Buttons
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
Xorg.0.log.old
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:40 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Cursor"
(**) |-->Input Device "Stylus"
(**) |-->Input Device "Eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/local,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "DRI" "on"
(**) intel(0): Option "FramebufferCompression" "on"
(**) intel(0): Option "Tiling" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xA0080000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0c00
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xa0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
(II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
(II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
(II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "TrippleBuffer" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "EnablePageFlip" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de, ru"
(**) Keyboard0: XkbLayout: "de, ru"
(**) Option "XkbVariant" "nodeadkeys, winkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
(**) Option "XkbOptions" "grp:caps_toggle"
(**) Keyboard0: XkbOptions: "grp:caps_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "SendCoreEvents"
(**) Cursor: always reports core events
(**) Cursor device is /dev/ttyS0
(**) Cursor is in absolute mode
(**) Cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Cursor: keeps shape
(**) Option "BottomX" "24576"
(**) Cursor: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Cursor: bottom y = 18432
(**) Option "BaudRate" "9600"
(**) Cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Stylus: always reports core events
(**) Stylus device is /dev/ttyS0
(**) Stylus is in absolute mode
(**) Stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Stylus: keeps shape
(**) Option "BottomX" "24576"
(**) Stylus: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Stylus: bottom y = 18432
(**) Stylus: threshold = 15
(**) Stylus: max x set to 24576 by xorg.conf
(**) Stylus: max y set to 18432 by xorg.conf
(**) Stylus: max z = 255
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(**) Stylus: serial speed 9600
(II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
(==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Eraser: always reports core events
(**) Eraser device is /dev/ttyS0
(**) Eraser is in absolute mode
(**) Eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Eraser: keeps shape
(**) Option "BottomX" "24576"
(**) Eraser: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Eraser: bottom y = 18432
(**) Eraser: threshold = 15
(**) Eraser: max x set to 24576 by xorg.conf
(**) Eraser: max y set to 18432 by xorg.conf
(**) Eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) Eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
(==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8079000 at 0xb78f7000
(II) intel(0): [drm] Closed DRM master.
anyone clue?
Last edited by lynucs (2009-05-09 18:38:01)took a look into everything.log.
that line looks pretty suspicious:
kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
it occures around the time i did the last resume.
here is a relevant snippet from everything.log:
Apr 14 18:35:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:35:58 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:36:00 thinky acpid: client connected from 9040[0:0]
Apr 14 18:36:00 thinky acpid: 1 client rule loaded
Apr 14 18:38:04 thinky ntpd[6265]: adjusting local clock by -87.862975s
Apr 14 18:42:04 thinky ntpd[6265]: adjusting local clock by -87.769493s
Apr 14 18:42:55 thinky acpid: client 6223[0:0] has disconnected
Apr 14 18:42:55 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
Apr 14 18:42:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:43:07 thinky kernel: PM: Syncing filesystems ... done.
Apr 14 18:43:07 thinky kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
Apr 14 18:43:07 thinky kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Apr 14 18:43:07 thinky kernel: Suspending console(s) (use no_console_suspend to debug)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D3
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 14 18:43:07 thinky kernel: serial 00:09: disabled
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PME# disabled
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B disabled
Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# enabled
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ACPI: Preparing to enter system sleep state S3
Apr 14 18:43:07 thinky kernel: Disabling non-boot CPUs ...
Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
Apr 14 18:43:07 thinky kernel: Intel machine check architecture supported.
Apr 14 18:43:07 thinky kernel: Intel machine check reporting enabled on CPU#0.
Apr 14 18:43:07 thinky kernel: Back to C!
Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
Apr 14 18:43:07 thinky kernel: Force enabled HPET at resume
Apr 14 18:43:07 thinky kernel: ------------[ cut here ]------------
Apr 14 18:43:07 thinky kernel: WARNING: at kernel/hrtimer.c:625 hres_timers_resume+0x41/0x50()
Apr 14 18:43:07 thinky kernel: Hardware name: 1866WBA
Apr 14 18:43:07 thinky kernel: hres_timers_resume() called with IRQs enabled!Modules linked in: ipv6 aes_i586 aes_generic i915 drm i2c_algo_bit ext2 pcmcia psmouse thinkpad_acpi rfkill nvram i2c_i801 serio_raw iTCO_wdt iTCO_vendor_support i2c_core sg yenta_socket rsrc_nonstatic sdhci_pci sdhci pcmcia_core mmc_core video output uhci_hcd ehci_hcd usbcore intel_agp agpgart evdev thermal fan button battery ac fuse snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ath_pci wlan ath_hal(P) arc4 ecb ath5k mac80211 led_class cfg80211 tg3 libphy cpufreq_powersave cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table processor rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod ata_piix ahci ata_generic pata_acpi libata scsi_mod
Apr 14 18:43:07 thinky kernel: Pid: 9512, comm: s2ram Tainted: P 2.6.29-ARCH #1
Apr 14 18:43:07 thinky kernel: Call Trace:
Apr 14 18:43:07 thinky kernel: [<c012f9d7>] warn_slowpath+0x87/0xe0
Apr 14 18:43:07 thinky kernel: [<c011ec25>] default_spin_lock_flags+0x5/0x10
Apr 14 18:43:07 thinky kernel: [<c01164d0>] lapic_next_event+0x10/0x20
Apr 14 18:43:07 thinky kernel: [<c01500e3>] clockevents_program_event+0xa3/0x170
Apr 14 18:43:07 thinky kernel: [<c0151312>] tick_dev_program_event+0x32/0xb0
Apr 14 18:43:07 thinky kernel: [<c0150447>] tick_notify+0x97/0x3c0
Apr 14 18:43:07 thinky kernel: [<c01491a6>] notifier_call_chain+0x36/0x70
Apr 14 18:43:07 thinky kernel: [<c0147ea1>] hres_timers_resume+0x41/0x50
Apr 14 18:43:07 thinky kernel: [<c014cc3a>] timekeeping_resume+0x11a/0x140
Apr 14 18:43:07 thinky kernel: [<c0299d91>] __sysdev_resume+0x11/0x50
Apr 14 18:43:07 thinky kernel: [<c0299e0f>] sysdev_resume+0x3f/0x70
Apr 14 18:43:07 thinky kernel: [<c015b410>] suspend_devices_and_enter+0x160/0x190
Apr 14 18:43:07 thinky kernel: [<c015bb7f>] freeze_processes+0x4f/0xa0
Apr 14 18:43:07 thinky kernel: [<c015b58a>] enter_state+0xfa/0x150
Apr 14 18:43:07 thinky kernel: [<c015b674>] state_store+0x94/0xd0
Apr 14 18:43:07 thinky kernel: [<c015b5e0>] state_store+0x0/0xd0
Apr 14 18:43:07 thinky kernel: [<c0224a74>] kobj_attr_store+0x24/0x30
Apr 14 18:43:07 thinky kernel: [<c01f3351>] sysfs_write_file+0xa1/0x100
Apr 14 18:43:07 thinky kernel: [<c01f32b0>] sysfs_write_file+0x0/0x100
Apr 14 18:43:07 thinky kernel: [<c01a8df0>] vfs_write+0xa0/0x160
Apr 14 18:43:07 thinky kernel: [<c01a8f81>] sys_write+0x41/0x80
Apr 14 18:43:07 thinky kernel: [<c0103ea3>] sysenter_do_call+0x12/0x2f
Apr 14 18:43:07 thinky kernel: ---[ end trace 2b9e3dc85bad025f ]---
Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x68000000)
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xa0211000)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: restoring config space at offset 0x3 (was 0x5008, writing 0xa808)
Apr 14 18:43:07 thinky kernel: ACPI: Waking up from system sleep state S3
Apr 14 18:43:07 thinky kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PME# disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: PME# disabled
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb2: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb3: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb4: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb5: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:1e.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# disabled
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Apr 14 18:43:07 thinky kernel: serial 00:09: activated
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Starting disk
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
Apr 14 18:43:07 thinky kernel: ata1: EH complete
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 14 18:43:07 thinky kernel: usb 4-2: reset full speed USB device using uhci_hcd and address 2
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: Restarting tasks ... done.
Apr 14 18:43:07 thinky acpid: client 9040[0:0] has disconnected
Apr 14 18:43:07 thinky logger: ACPI group/action undefined: processor / CPU
Apr 14 18:43:07 thinky acpid: client connected from 9040[0:0]
Apr 14 18:43:07 thinky acpid: 1 client rule loaded
Apr 14 18:43:08 thinky dhcpcd[7651]: wlan0: carrier lost
Apr 14 18:43:08 thinky kernel: wlan0: deauthenticating by local choice (reason=14)
Apr 14 18:43:08 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
Apr 14 18:43:09 thinky kernel: ath5k phy0: noise floor calibration timeout (2452MHz)
Apr 14 18:43:13 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
Apr 14 18:43:13 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:13 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:13 thinky kernel: wlan0: authenticated
Apr 14 18:43:13 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:13 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:14 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 2
Apr 14 18:43:14 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:14 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:14 thinky kernel: wlan0: authenticated
Apr 14 18:43:14 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:14 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:15 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 3
Apr 14 18:43:15 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:15 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:15 thinky kernel: wlan0: authenticated
Apr 14 18:43:15 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:15 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:16 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b timed out
Apr 14 18:43:19 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
Apr 14 18:43:19 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 19:27:27 thinky syslog-ng[5106]: syslog-ng starting up; version='3.0.1'
Apr 14 19:27:27 thinky kernel: Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
Apr 14 19:27:27 thinky kernel: KERNEL supported cpus:
Apr 14 19:27:27 thinky kernel: Intel GenuineIntel -
[SOLVED] intel 855GM, Xorg 1.6.1 and black screen
Just installed Arch on my desktop and have the following problem:
I have generated x.conf.new using X -configure and that resulted in two Device sections for
cards - "0:2:0" and "0:2:1" Bus ID. With this configuration X refused to load with message
"Can not set Bus ID", buy either removing section with "0:2:1" completely or by just removing
"Bus ID" parameter I was able to start X, but it presents only black screen and hangs.
I have seen several issues like mine on this boards but neither has a solution to fix my problem:
1) I tried to switch to xf86-video-intel-legacy - same behavior
2) Tried to use i810 driver instead of intel - "no devices found"
3) Tried to start X without config file (only using hal) - just hangs badly, black screen and non responsive
4) Tried disabling autoconfiguration - black screen
5) Tried disabling DRI - black screen
6) Tried switching to XAA - black screen
7) Tried "ForceEnablePipeA "true" - black screen
8) Tried ignoring one of the monitors using "monitor-VGA", "monitor-LVDS" in device section - black screen
Anything else I can try? Video Adapter is Intel 82852/855GM at 00:02.0
Xorg log file with "ModeDebug" true
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux darkzone-mobile 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 9 20:32:36 2009
(++) Using config file: "xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Internal LCD"
(**) | |-->Device "Card0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfeb00000/524288, I/O @ 0x0000dc00/8
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfea80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile IntelВ® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "XAA"
(**) intel(0): Option "DRI" "False"
(**) intel(0): Option "ModeDebug" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFEB00000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(**) intel(0): Using XAA for acceleration
(II) intel(0): Hardware state on X startup:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section External VGA
(**) intel(0): Option "Ignore" "True"
(II) intel(0): Output LVDS using monitor section Internal LCD
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): found backlight control method /sys/class/backlight/asus-laptop
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): Resizable framebuffer: not available (0 2)
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 50176 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 200700 kB available
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
(Cannot allocate memory)
(II) intel(0): Allocating 3072 scanlines for pixmap cache
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
16 256x256 slots
6 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0011ffff: fake bufmgr (1024 kB)
(II) intel(0): 0x00120000-0x0012ffff: xaa scratch (64 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x000000000d6b8000 physical
(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x000000000b04c000 physical
(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000000b08d000 physical
(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x000000000b040000 physical
(II) intel(0): 0x007e9000-0x007e9fff: overlay registers (4 kB, 0x000000000d7fa000 physical
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB)
(II) intel(0): 0x08000000: end of aperture
(WW) intel(0): Chosen PLL clock of 48.0 Mhz more than 2% away from desired 50.4 Mhz
(II) intel(0): Mode for pipe B:
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): chosen: dotclock 48000 vco 1344000 ((m 140, m1 23, m2 13), n 3, (p 28, p1 2, p2 14))
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Mode for pipe A:
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): chosen: dotclock 31500 vco 1008000 ((m 126, m1 20, m2 14), n 4, (p 32, p1 8, p2 4))
(II) intel(0): Hardware state at EnterVT:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000001
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x0001feff
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x00000008
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0xd9000000 (enabled, pipe B)
(II) intel(0): DSPASTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x025703ff (1024, 600)
(II) intel(0): DSPABASE: 0x01000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x0004140e (n = 4, m1 = 20, m2 = 14)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x90860000 (enabled, non-dvo, default clock, DAC/serial mode, p1 = 8, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x033f027f (640 active, 832 total)
(II) intel(0): HBLANK_A: 0x033f027f (640 start, 832 end)
(II) intel(0): HSYNC_A: 0x02bf0297 (664 start, 704 end)
(II) intel(0): VTOTAL_A: 0x020701df (480 active, 520 total)
(II) intel(0): VBLANK_A: 0x020701df (480 start, 520 end)
(II) intel(0): VSYNC_A: 0x01ea01e8 (489 start, 491 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x58000000 (disabled, pipe A)
(II) intel(0): DSPBSTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x01000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x03ff0257 (1024, 600)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x0003170d (n = 3, m1 = 23, m2 = 13)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0xa204008e (disabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 31500 n 4 m1 20 m2 14 p1 8 p2 4
(II) intel(0): pipe B dot 48000 n 3 m1 23 m2 13 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Asus Laptop extra buttons
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event5"
(II) Asus Laptop extra buttons: Found 1 mouse buttons
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(**) Asus Laptop extra buttons: YAxisMapping: buttons 4 and 5
(**) Asus Laptop extra buttons: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) TPPS/2 IBM TrackPoint: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Asus Laptop extra buttons: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) intel(0): Comparing regs from server start up to After LeaveVT
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
Latest configuration file which still is not working
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
# Load "dri2"
# Load "dri"
Load "dbe"
EndSection
Section "Monitor"
Identifier "Internal LCD"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "External VGA"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "Ignore" "True"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
Option "DRI" "False" # [<bool>]
Option "AccelMethod" "XAA"
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
Option "monitor-VGA" "External VGA"
Option "monitor-LVDS" "Internal LCD"
Option "ModeDebug" "True"
BoardName "82852/855GM Integrated Graphics Device"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Internal LCD"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card0"
Monitor "External VGA"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by B0b (2009-05-10 21:07:56)firecat53 wrote:
Try the xf86-intel-video-newest package from AUR.
Scott
Installed 2.7.0 from abs testing.. result is the same.. Unfortunately newest from AUR is not compiling complaining about some
macro stuff
Anything else?
This is log file with 2.7.0 module:
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux darkzone-mobile 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 9 23:54:58 2009
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Internal LCD"
(**) | |-->Device "Card0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfeb00000/524288, I/O @ 0x0000dc00/8
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfea80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.7.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile IntelВ® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "XAA"
(**) intel(0): Option "DRI" "False"
(**) intel(0): Option "ModeDebug" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFEB00000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(**) intel(0): Using XAA for acceleration
(II) intel(0): Hardware state on X startup:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section External VGA
(**) intel(0): Option "Ignore" "True"
(II) intel(0): Output LVDS using monitor section Internal LCD
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): found backlight control method /sys/class/backlight/asus-laptop
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): Resizable framebuffer: not available (0 2)
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 50176 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 200700 kB available
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
(Cannot allocate memory)
(II) intel(0): Allocating 3072 scanlines for pixmap cache
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
16 256x256 slots
6 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(WW) intel(0): drmDropMaster failed: Unknown error 4294967295
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x00fe9000 (pgoffset 4073)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0002ffff: xaa scratch (64 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x000000000b26d000 physical
(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x000000000e6c4000 physical
(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000000b157000 physical
(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x00000000099bc000 physical
(II) intel(0): 0x007e9000-0x00fe8fff: fake bufmgr (8192 kB)
(II) intel(0): 0x00fe9000-0x00fe9fff: overlay registers (4 kB, 0x0000000006c1a000 physical
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x08000000: end of aperture
(WW) intel(0): Chosen PLL clock of 48.0 Mhz more than 2% away from desired 50.4 Mhz
(II) intel(0): Mode for pipe B:
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): chosen: dotclock 48000 vco 1344000 ((m 140, m1 23, m2 13), n 3, (p 28, p1 2, p2 14))
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Mode for pipe A:
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): chosen: dotclock 31500 vco 1008000 ((m 126, m1 20, m2 14), n 4, (p 32, p1 8, p2 4))
(II) intel(0): Hardware state at EnterVT:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000001
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x0001feff
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x00000008
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0xd9000000 (enabled, pipe B)
(II) intel(0): DSPASTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x025703ff (1024, 600)
(II) intel(0): DSPABASE: 0x01000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x0004140e (n = 4, m1 = 20, m2 = 14)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x90860000 (enabled, non-dvo, default clock, DAC/serial mode, p1 = 8, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x033f027f (640 active, 832 total)
(II) intel(0): HBLANK_A: 0x033f027f (640 start, 832 end)
(II) intel(0): HSYNC_A: 0x02bf0297 (664 start, 704 end)
(II) intel(0): VTOTAL_A: 0x020701df (480 active, 520 total)
(II) intel(0): VBLANK_A: 0x020701df (480 start, 520 end)
(II) intel(0): VSYNC_A: 0x01ea01e8 (489 start, 491 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x58000000 (disabled, pipe A)
(II) intel(0): DSPBSTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x01000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x03ff0257 (1024, 600)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x0003170d (n = 3, m1 = 23, m2 = 13)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0xa204008e (disabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 31500 n 4 m1 20 m2 14 p1 8 p2 4
(II) intel(0): pipe B dot 48000 n 3 m1 23 m2 13 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Asus Laptop extra buttons
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event5"
(II) Asus Laptop extra buttons: Found 1 mouse buttons
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(**) Asus Laptop extra buttons: YAxisMapping: buttons 4 and 5
(**) Asus Laptop extra buttons: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) TPPS/2 IBM TrackPoint: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Asus Laptop extra buttons: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) intel(0): Comparing regs from server start up to After LeaveVT
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86UnbindGARTMemory: unbind key 6
(WW) intel(0): drmDropMaster failed: Unknown error 4294967295 -
Black screen with GMA 500 (driver psb)
Greetings.
I'm trying to install Arch Linux in an Asus eee T91, which has a Intel GMA 500 graphic card. But, this one is not a REAL intel, but a PowerVR. With VESA drivers I achived to have it working but, at 800x600. In order to cope with the problem I'm trying to use the psb driver, which is properly explained on this thread. But, unfortunately, after following the steps, everything I could do is to get a better resolution in shell tty, but still no working X.
After executing X, the screen gets black, and stays that way until it shuts down. (Sometimes I get the tasking bar at the left top of the screen if I execute X from the same PC). I made to see by ssh (method I use to reboot this PC) , that X works, but, after a few seconds, they stop working. The screen is still black, anyway, and keyboard doesn't work either after executing X.
[root@papyrus ~]# while [ 0 -le 1 ]; do ps -e | grep X; date ; done
vie oct 9 22:23:28 CEST 2009
vie oct 9 22:23:28 CEST 2009
vie oct 9 22:23:28 CEST 2009
vie oct 9 22:23:28 CEST 2009
vie oct 9 22:23:28 CEST 2009
3485 tty1 00:00:00 X
vie oct 9 22:23:28 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:28 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:29 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:30 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:30 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:30 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:30 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:30 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:30 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:30 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:30 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:30 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:30 CEST 2009
3485 tty7 00:00:00 X
vie oct 9 22:23:30 CEST 2009
3485 ? 00:00:00 X <defunct>
vie oct 9 22:23:30 CEST 2009
3485 ? 00:00:00 X <defunct>
vie oct 9 22:23:30 CEST 2009
3485 ? 00:00:00 X <defunct>
vie oct 9 22:23:30 CEST 2009
3485 ? 00:00:00 X <defunct>
vie oct 9 22:23:30 CEST 2009
3485 ? 00:00:00 X <defunct>
vie oct 9 22:23:30 CEST 2009
3485 ? 00:00:00 X <defunct>
vie oct 9 22:23:30 CEST 2009
3485 ? 00:00:00 X <defunct>
vie oct 9 22:23:30 CEST 2009
3485 ? 00:00:00 X <defunct>
vie oct 9 22:23:30 CEST 2009
3485 ? 00:00:00 X <defunct>
vie oct 9 22:23:30 CEST 2009
3485 ? 00:00:00 X <defunct>
vie oct 9 22:23:30 CEST 2009
vie oct 9 22:23:30 CEST 2009
vie oct 9 22:23:30 CEST 2009
psb version that i use is from this repositories: http://julienetienne.free.fr/Arch/repository
My kernel version is:
[root@papyrus ~]# uname -a
Linux papyrus 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686 Intel(R) Atom(TM) CPU Z520 @ 1.33GHz GenuineIntel GNU/Linux
X log:
http://pastebin.com/f72073768
xorg.conf
[root@papyrus ~]# cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "dbe"
Load "record"
Load "extmod"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ExaMem" # <i>
#Option "ExaScratch" # <i>
#Option "IgnoreACPI" # [<bool>]
#Option "NoPanel" # [<bool>]
#Option "LidTimer" # [<bool>]
#Option "NoFitting" # [<bool>]
#Option "DownScale" # [<bool>]
#Option "Vsync" # [<bool>]
Option "IgnoreACPI" "true"
Option "AccelMethod" "EXA"
Option "MigrationHeuristic" "greedy"
Identifier "Card0"
Driver "psb"
VendorName "Intel Corporation"
BoardName "System Controller Hub (SCH Poulsbo) Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x600" "800x600" "640x480"
Virtual 1024 600
EndSubSection
EndSection
rc.local:
[root@papyrus ~]# cat /etc/rc.local
#!/bin/bash
# /etc/rc.local: Local multi-user startup script.
modprobe agpgart
modprobe i2c-core
insmod /lib/modules/2.6.30-ARCH/extra/drm.ko
modprobe i2c-algo-bit
insmod /lib/modules/2.6.30-ARCH/extra/psb.ko
rc.conf
[root@papyrus ~]# cat /etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="es_ES.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Madrid"
KEYMAP="es"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!memstick !snd-pcsp acpi_cpufreq ath9k pciehp uvcvideo)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="papyrus"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(@acpid @laptop-mode cpufreq syslog-ng !netfs !crond @hal @network @net-profiles sshd)
lspci:
[root@papyrus ~]# lspci
00:00.0 Host bridge: Intel Corporation System Controller Hub (SCH Poulsbo) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07)
00:1b.0 Audio device: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller (rev 07)
00:1c.0 PCI bridge: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 1 (rev 07)
00:1c.1 PCI bridge: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 2 (rev 07)
00:1d.0 USB Controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #1 (rev 07)
00:1d.1 USB Controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #2 (rev 07)
00:1d.2 USB Controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #3 (rev 07)
00:1d.7 USB Controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB EHCI #1 (rev 07)
00:1f.0 ISA bridge: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge (rev 07)
00:1f.1 IDE interface: Intel Corporation System Controller Hub (SCH Poulsbo) IDE Controller (rev 07)
01:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
[root@papyrus ~]# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH Poulsbo) [8086:8100] (rev 07)
00:02.0 VGA compatible controller [0300]: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07)
00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller [8086:811b] (rev 07)
00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 1 [8086:8110] (rev 07)
00:1c.1 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 2 [8086:8112] (rev 07)
00:1d.0 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #1 [8086:8114] (rev 07)
00:1d.1 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #2 [8086:8115] (rev 07)
00:1d.2 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #3 [8086:8116] (rev 07)
00:1d.7 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB EHCI #1 [8086:8117] (rev 07)
00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge [8086:8119] (rev 07)
00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub (SCH Poulsbo) IDE Controller [8086:811a] (rev 07)
01:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
03:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 8398
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at f3f80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at c880 [size=8]
Memory at d0000000 (32-bit, non-prefetchable) [size=256M]
Memory at f3f40000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 2
Capabilities: [b0] Vendor Specific Information <?>
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: psb
ThanksDriver is said to not work with Xorg server 1.7, see http://aur.archlinux.org/packages.php?ID=31995
There is new IEGD driver out there in the wild, but currently only in the form of some Ubuntu mega kernel patch. See http://www.fit-pc2.com/forum/viewtopic.php?f=46&t=1322 and support my request there with your own voice! So we can adopt IEGD driver to Arch Linux!
Last edited by ypnos (2010-01-24 14:04:18) -
Black Screen before installing windows 7. Lets solve once and for all.
I have a late 2008 macbook pro and have been trying to install windows 7 through boot camp for a number of days now. I have read every forum on the internet and have tried every popular solution (i.e. resetting pram, smc, unplugging, changing screen resolution, etc.) and nothing has worked. I know there are many other people with this problem but none of them have solutions. I had windows 7 installed a few months ago but it stopped working and I had to delete it. Just yesterday I reinstalled Snow Leopard and still nothing. I created the partition and tried to install windows but it just goes to the blinking cursor for one second, then a black screen. I have tried everything possible and nothing works.
Please lets try to get this problem solved because out of every single forum on the internet, none of them have solved this problem.I think after weeks of searching I have finally narrowed it down, based on what I have read, to a disk drive problem. It seems to be something wrong with the EFI or the entire disk drive in general. I am taking it to the apple store tomorrow and I highly doubt they will do anything.
-
Black Screen after login in Window 8.1
After logging in, the screen goes black, with only the mouse visible. I can run programs through task manager and the computer runs normally until after I log in. I would like to know whether this can be fixed asap since I need a computer for school.
This question was solved.
View Solution.Hi:
Follow this useful HP web document:
http://support.hp.com/us-en/document/c04572861
Or David's suggestion here :
http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/Pavilion-x2-pc-goes-black-after-logging-...
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc? -
My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?
Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore
Maybe you are looking for
-
Login settings will not update the local testing server files
When uploading to web server from local testing server, changing login settings in the control panel does not update the local testing server Restrict Access to page files. Causing login on website not to function. It does however update the Connecti
-
HT2534 How can i download from two different store with the same account?
I live in both countries but my credit card is registered in a french bank, therefore it is not recognised by the Aussie store on itunes. There are apps or music i want to get form the Aussie store as well as music and other apps from the french one.
-
Internal hard drives won't appear in Disk Util
I have a bizarre problem with my hard drives now. I'm on a 2.4GHz Core2Duo Macbook Pro 15" with 10.5.4. I've switched the hard drive a couple of times before with no issues whatsoever. Now, with the exception of the brand new one that won't hold an i
-
Hello, I'm new to BI Publisher, hoping to get some expert advice on the setup and usage part. 1. BI Publisher doesn't provide a customizable front-end UI web interface? Other than the enterprise login 'http://<hostserver>:9704/xmlpserver/'. Is that c
-
Question: How can I implement check box in workflow?
Can I implement check box, drop down menu etc in workflow?