Screen is blank on a t43. PLEASE help me!

I have a thinkpad t43. When I push power, it seems to turn on, but the screen is blank. When it turns on though it make beep signals, however, none of the suggested beep signals on the lenovo website match my beep signals. It makes four short beeps, followed by three long beeps. and the screen is blank. When its powered on, the power lights appear, and the CPU is clearly running. Frankly I don't know what to do. Please help me.

Yea i tried that already with every screen in my house and they all didnt work. I tried your idea of playing with the lighting, and that didnt seem to work either. I have been looking online and it seems that the security board is most likely the one to blame. Only problem is they cost half as much as the darn computer did. But i hope that im wrong.

Similar Messages

Blue screen 109 error, mini dump attached, please help

Hi Experts,
I am frequently getting blue screen error in my laptop. Please help. The link to minidump file is given below. I am using Windows 7 ultimate operating system.
I have tried a lot of things to avoid this dump but it keep recurring.
https://onedrive.live.com/redir?resid=49561AD592663106!107&authkey=!AFI9kcFyy6ncfJ8&ithint=file%2c.dmp
regards,
Ayaz

AA
This one DMP file was inconclusive please run driver verifier to find the underlying cause
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Since it is more likely to be a driver please run verifier first.
1-Driver verifier (for complete directions see our wiki here)
2-Memtest. (You can read more about running memtest here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

My ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me

my ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me

- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again.

I cracked my iPod screen..how much would it cost to replace the screen? The iPod works perfectly still, but the screen pieces are falling off. Please help!

I cracked my iPod touch screen...how much would it cost to replace the screen? The iPod works perfectly, but the pieces of the screen are chipped and cracked. Please help!

Contact Apple or a third party repair center and ask.

Whenever i open any tab on the app store such as games or entertainment or travel its starts loading and all i see is a blank page...Please HELP!!!

whenever i open any tab on the app store such as games or entertainment or travel its starts loading and all i see is a blank page...Please HELP!!!

Try updating to iTunes 10.4.1 -> http://www.apple.com/itunes/download/
If that doesn't work, try resetting Winsock. It looks like that worked for quite a few people in this thread -> With iTunes 10.4 I can access iTunes store.
MTG68 wrote - In windows 7, click on your start menu, go to accessories, right click on the command prompt icon and choose "run as administrator". Once it opens, type in the following command...
netsh winsock reset
hit enter and it should say something like winsock reset successful now reboot your computer.

My iphone volume turns down randomly own its own. It will turn up on the buttons, but will turn back down by itself and i have to fight the volume to keep it from muting. Plus, the mute logo stays on the screen when it mutes itself. Please help.

My iphone volume turns down randomly own its own. It will turn up on the buttons, but will turn back down by itself and i have to fight the volume to keep it from muting. Plus, the mute logo stays on the screen when it mutes itself. Please help.

Unfortunately this is probably a hardware issue and you will need to take it to an Apple Store.

My iphone 4 screen has gone blank and its still on it vibrates when i put it on charge ive tried turning it off and the screen is still not showing anything please help

my iphone 4 screen has gone blank and its still on it vibrates when i put it on charge ive tried turning it off and the screen is still not showing anything please help

Hi Ellen,
Welcome to Apple Support Communities.
It sounds like your iPhone 4 has a dim or blank black screen but responds to some commands like enabling vibrate. I understand this may be a frustrating situation, but the troubleshooting suggestions in the article below will help you solve the issue.
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
If your screen is too dim, too bright, or you see only faint images
Try to adjust the brightness. If the screen doesn’t respond when you adjust the brightness, open several apps to make sure it’s not an issue with only one app.
If you have a screen protector, try removing it. Try removing your case if it includes a screen protector.
If you see the issue in multiple apps, restart your device.
If restarting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Take care,
-Jason

[solve] Screen resolution changed after upgrading xorg please help?

Ive been using arch for almost a year now and have grown to like it a lot. I recently updated my system with pacman -Syu. during this process my xorg was updated and now im having issues.
I usually run my monitor at 1152 x 864 running at 85 for a refresh rate. Id like to continue doing that.
Since updating i now run at 1280x720.
Everything looks retarded as a result.. and id really like to get things back to normal. Ive pasted my xorg.conf here.. the modeline for the correct resolution is still there but it would seem xorg isnt respecting it.
I will admit to using a REALLY old radeon graphics card (radeon 7000) but it has never been an issue in the past with arch or any other distro.
Please help me restore my usual openbox display settings.
Thanks.
thewayofzen
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/artwiz-fonts"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "int10"
Load "vbe"
Load "record"
Load "GLcore"
Load "dbe"
Load "xtrap"
Load "dri"
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 240 # mm
Identifier "Monitor0"
VendorName "DEL"
ModelName "DELL D1025TM"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 120.0
Modeline "1152x864_85.00" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
Gamma 1.71
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "AccelDFS" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "MergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "BIOSHotkeys" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "ConstantDPI" # [<bool>]
Option "AGPMode" "4"
Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# SubSection "Display"
#DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
EndSection
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 24
# EndSubSection
#EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by thewayofzen (2007-11-16 12:22:55)

Is there anything insteresting in /var/log/Xorg.0.log? Have you tried switching the driver to vesa?
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/artwiz-fonts"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "int10"
Load "vbe"
Load "record"
Load "GLcore"
Load "dbe"
Load "xtrap"
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "DEL"
ModelName "DELL D1025TM"
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1152x864"
EndSubSection
EndSection
Try using the above as your xorg.conf file - I've cleaned it up a bit and removed everything that's not essential. If it works you can always add all the that you need from your old xorg.conf file and if it doesn't - well, I guess it won't hurt to try...
Last edited by fwojciec (2007-11-14 07:09:02)

Display/Screen Glitches on Lumia 530! Please help

Hello team,
I had purchased Lumia 530 last week and until today morning (24th Aug), I see white lines/dangling display all over!
I'm surprised over the glitches and I havent installed/deleted any app.. White lines are evident below the navigation bar too (below the back arrow and windows key). Please find the images below.
It seems to be a handset problem.. Please help me.
Attachments:
IMG_20140824_214651.jpg ‏307 KB
IMG_20140824_214724.jpg ‏254 KB
IMG_20140824_214553.jpg ‏355 KB

Thanks for the response. I had purchased it online and would go to nearest Nokia Support Center in the coming days..
jimmyireland wrote:
I have similar on my 530 but does not seem to be as thick as yours seems to be offset a liitle from where the screen ends and placement of the on screen keys.
I would go back to where you bought it and compare it with another if its possible.

Why cant I see my save photos. I saved them from an email but it either comes up a black screen or it say Jpeg. Please help ????

I have some photos I was sent Via email and I would like to save them on my phone but when I saved them when I try and look at them in the camera roll they are black screen or it just says JPEG. Can some please help me on how to fix this??

I have some photos I was sent Via email and I would like to save them on my phone but when I saved them when I try and look at them in the camera roll they are black screen or it just says JPEG. Can some please help me on how to fix this??

Screen wake up problem/ tried everything-please help!

I have had the my G2 since September and have absolutely loved it. A couple of weeks ago, it seemed to get a little "twitchy" with some erratic touch screen behavior (delayed responsiveness, over responsiveness, etc). Then, one day, the "knock on" (double tap to wake up phone) feature quit. Then numerous apps began not working correctly. I uninstalled the 2 apps that have been installed in the last couple months as well as a few others and the problem didn't change. Then, went to put the apps back on and the "install" button in play store is unresponsive. The rest of the screen works fine, just not that little button. Also, the screen that drops down to tell you the notifications on the top bar is super finicky all of a sudden. Checked all settings, tweaked settings, rebooted, Did a hard reboot, safe mode, and factory reset. No resolve. I am not a "heavy" user, only about 10 apps total installed on my phone in the 7 months I've had it. Frustration is mounting and I really don't want to have to take it in. I've already lost all of the settings and everything I had to personalize my phone…Taking it in is last resort. Please Help!

Let's get your LG G2 back to like new condition jess28540! I had similar issues with mine and I resolved by doing a hard reset (I understand that you have done this) and removing an application that was causing my phone to act erratic. What I recommend is doing a hard reset http://vz.to/1bEaoQu (factory reset), then install your third party application one at a time and test for a few hours before installing another application. This process will assist you identifying conflicting applications, then remove them for good and you should be OK. Keep us posted.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

Getting error "Screen output area too small"! Please help!

I am getting an error "Screen output area too small" when looping through some huge internal table and sending to spool "on change of some value" in my internal table. Could someone please help me in correcting this? Rewards assured.
Thanks.
Mithun

Check the simple program and have tested ,it works great( IN ECC 6 Version)
REPORT ztestspool.
DATA : arc_params TYPE arc_params,
v_print_parms TYPE pri_params,
w_valid TYPE char1,
w_valid_spool TYPE char1.
CONSTANTS : lc_paart LIKE sy-paart VALUE 'X_65_132', " Paper Format
lc_locl TYPE sypdest VALUE 'LOCL', " Destination
c_x TYPE char1 VALUE 'X'.
Setup the Print Parmaters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    authority              = space
    immediately            = space
    new_list_id            = c_x
    no_dialog              = c_x
    user                   = sy-uname
IMPORTING
    out_parameters         = v_print_parms
EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params   = 2
    invalid_archive_params = 3
    OTHERS                 = 4.
IF sy-subrc NE 0.
CLEAR : v_print_parms.
ENDIF.
The printer destination has to be set up
IF v_print_parms-pdest = space.
v_print_parms-pdest = lc_locl.
ENDIF.
Explicitly set line width, and output format so that
the PDF conversion comes out OK
*v_print_parms-linsz = c_linsz.
v_print_parms-paart = lc_paart.
NEW-PAGE PRINT ON PARAMETERS v_print_parms NO DIALOG.
*PERFORM display_output.
write :/ 'This is test for spool generation'.
NEW-PAGE PRINT OFF.
Thanks
Seshu

Blue screen errors in W8.1 . Please help !

I've recently started to get these blue screen errors .. Sometimes its system service exception and sometimes its related to irql.. It usually happens when I quit a game or rarely happens while playing games .. Please help me and provide fix for this ..
I have uploaded the dump files to mediafire and given the link below..
https://www.mediafire.com/folder/79hn57a3lcc63ax,h8if650cjm9xojf,2a12po907477sbk/shared

These crashes were related to memory corruption (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Since it is more likely to be a driver please run verifier first.
1-Driver verifier (for complete directions see our wiki here)
If verifier does not find the issue we can move on to this.
2-Memtest. (You can read more about running memtest here)
If you cannot boot after enabling verifier reboot into safe mode
In Vista & win 7 (F8)
In win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Apple TV 1G black screen or green and violet colors please help me

Hi, I have an apple tv 1G and from one day to another is not black screen, the strange thing is that on another monitor "HP w2207" looks good. But I've tested Sony LED TV, LG, .... and does not work in some apple when starting out and color is violet and green and looks bad but does not exit the main menu. I've reinstalled the factory, I tried to change resolution I miss everything but nothing. I'm desperate please help me

I also periodically have this purple/green color showing on the screen when I turn on and sometimes it happens when I turn on Directv so not an Apple TV issue. I believe in my case it is the HDMI cable/port causing it. But it corrects and gives normal picture if I turn off the tv and all devices and turn all on again.

Screen won't work...Please help!

I have tried a reboot and have done it but my screen will still not work.
I cannot swipe anything to get into my phone.
Please help!
Jay

Good evening Jay13,
I am sorry to learn that your phone's screen is not responding. Please run and test in Safe Mode http://vz.to/HcISAL if this does not help, try the alternate method for a hard reset (factory reset) found at this link http://vz.to/z30zKf and keep us posted.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

Screen is blank on a t43. PLEASE help me!

Similar Messages

Maybe you are looking for