Screen is locked in magnification mode, cannot shut down??

Screen is locked in magnification, cannot shut down??

Double-tap the screen with three fingers to remove magnification. Go to Settings > General > Accessibility > Zoom and turn this OFF.

Similar Messages

  • Portege 7140CT Shutting Down In Standby Mode - Cannot shut down normally

    Hi. I have purchased a Portege 7140CT laptop for my son. This is a fine unit but has a 'Shutdown' problem - in that it wont shutdown, that is. It appears to power down, but the 2nd indicator from the LHS on the front of the unit flashes slowly. The user guide says this happens when the unit enters 'Standby' mode. I have tried all the FN+F3 options (Shutdown, Standby and Hibernate) with no difference. I have disabled the function key facility in Control Panel. I have disabled 'Hibernate' mode in Control Panel. All to no avail. Anyone any idea why this might be happening and how I might resolve? Many thanks for your assistance. Mike

    Hi,
    I've never heard of this problem, but maybe reinstalling the system can solve it.
    Or maybe reinstalling or updating the BIOS will help.
    Sorry I don't have a better idea.
    Bye

  • After latest updates, cannot shut down or restart, takes me to white screen

    I have a new MBP retina and after the latest Mountain Lion updates which I seem to remember including an iPhoto and Aperture update but also seemed to "flash" the EFI? (not sure), but there seemed to be some OS update included. Either way, my first initial issue was that when I clicked on my user account and typed in password after boot, it took me to a dark gray screen and just stayed there. I finally was able to log into guest account and switch over to my desktop then fiddled with resolution settings and background and shut down applications and rebooted. I can now log into my main user account but I cannot shut down or restart from any account. It will take me to a white/gray screen and hang there perpetually until I hold down the power button.
    I've tried resetting PRAM before and after removing all cables for 2 mins. The issue persists in both my main account and the guest account. The computer simply will not shutdown or restart as it takes me to a white screen.
    Ideas?

    Hey guys, unfortunately I've had to re-install Mountain Lion to get rid of the issue, but here's my experiences after trying many things and contacting AppleCare...
    First, I had Lion and had upgraded to ML. They had me go do the following with limited success:
    1) Reset PRAM (no effect)
    2) Recovery Disk and repair permissions (no effect)
    3) Went to system /Library and User /Library and basically we went through several attempts at removing various files from (/Library/InputMethods, /Library/LaunchAgents, /Library/LaunchDaemons") Once I had essentially removed every file and dragged it into the trash (without deleting), the issue was resolved. So, it seems to point to an application that was not fully supported or giving problems within the ML environment. The plan was to drag them one by one back and do reboot/shutdown until I could isolate the application, but rather than do that, I just did a fresh install to take out any variable that could be present from having to do a Lion/ML upgrade. I was able to put a fresh copy of ML on the computer through the Recovery partition after establishing connection to my router. Everything is working fine now.
    Anyway, hope that helps some of you. It was a frustrating experience but seems to point to application issues wih the OS and not the OS itself. I think developers are still rushing to catch up with full ML support and so you might find yourself having many new updates in drivers or applications over the next month.

  • Frozen systemr won't move, cannot shut down, what can I do?

    Cursor won't move, system not responsive to keyboard commands, cannot shut down the system.

    I have been getting the gray screen and lock-up on my Air. I bought the machine in November. I took it in and got it replaced for a new one - now the new one is doing the same thing. The whole situation is obviously a bit annoying. Sure, I could go and have this one replaced as well, but to what end? Just to wind up having another Air that does the same thing. Eventually my warranty will expire and I will be stuck with a machine that freezes up on us. Not to mention the glitchy way it wakes up from sleeps then goes black for a few seconds before RE-waking up occasionally.

  • My caps lock was stuck and I shut down. Now it's coming back up in safe boot and asking for a password. It won't take my password, I believe because of the caps lock problem. So, how can I get in?

    My caps lock was stuck when I shut down my computer. It is coming back up in safe boot (I had spilled liquid on it).
    It's asking for my password - which has some lower case letters...So now how can I get in?
    Is there a way to change this password or something?
    I have a wireless keyboard, but it wasn't set up - so, It's not recognizing it.
    Any ideas?

    Take your computer to get the keyboard replaced, your lucky it didn't trigger the moisture sensor and brick your machine, so your chances of the machine working well after the keyboard is replaced is likely very good.
    As long as the main keyboard is sending a caps lock signal, it's not going to work even if you get in.
    If you need to remove files off the internal drive, use a Firewire cable (800 to 400 adpater may be needed) and hold T to boot the problem Mac into Firewire Target Disk Mode and connect the cable to another Mac, the hard drive will appear on the desktop which you can then remove/erase files.

  • Is fully locked i cant restart or shut down.

    .is fully locked i cant restart or shut down. After I connected my iPhone 4s itunes you a message appeared asking if I want to upgrade to iOS 8. I say yes and then downloading it another message appeared saying that an error occurred and then iPhone mi died and showed the screen to connect it to itunes, when I connected , it showed on the screen to update , I accepted and my screen updating but gave an error and caught everything , I can do nothing and is not updating .

    .is fully locked i cant restart or shut down. After I connected my iPhone 4s itunes you a message appeared asking if I want to upgrade to iOS 8. I say yes and then downloading it another message appeared saying that an error occurred and then iPhone mi died and showed the screen to connect it to itunes, when I connected , it showed on the screen to update , I accepted and my screen updating but gave an error and caught everything , I can do nothing and is not updating .

  • Cannot shut down the computer !

    I cannot shut down my computer after I click Apple menu>shut down>>shut down again. Then got no response for a while, prompt out "Logout has timed out because the application Finder failed to quit. To try again, quit Finder and choose Log Out from Apple menu." But I have already close Finder by clicking the RED button on top left corner. From the Finder pull down menu, I cannot find the "Quit" command. When I click Apple Menu again and click Force Quit, it prompt out a small window and ask to Re-launch Finder, or Cancel. If I click cancel, nothing happen, if I click re-launch, it flash and keep asking Re-launch. What's happened to my computer? Anyone can help ?

    This is a problem that I've been having with the two IMacs our office uses. It doesn't happen every time, which makes it even more difficult to troubleshoot.
    What happens is the computer goes into shutdown(or logging out) mode, hangs for awhile, then the desktop just comes back on. Often there will be an error message saying something like "Logout timed out due to failure of Safari to quit." And sometimes it will list a different application. But, in all instances, there ARE no applications open. When I launch the Activity Monitor, it confirms that there are no hidden apps running anywhere. It just won't shut down or log out. At that point, you have to force power down with the power button, which is not a healthy way to shut down on a regular basis.
    I've run disk utility and permissions repair off the system disk. I've zapped the PRAM. My latest attempt has been to reset the SMC, so I will have to monitor it to see if it did the trick.
    I'm sure that if I called Applecare at this point that they would tell me to archive and install. But that is a bit drastic a step and isn't really troubleshooting. Not when it will take considerable time to reconfigure these machines for uncertain results. Since A.) the IMacs were right out of the box when this problem began and B.) the MacPros and MacBooks that run the same OS and the same software DO NOT experience a similar problem, I suspect it wouldn't resolve the issue.
    I just want to exhaust all other possibilities before taking the archive and install step, because you always end up losing prefs from third party software, etc...
    Has anyone else experienced this problem before???

  • Cannot shut down restart or log out

    Hi,
    My new macbook pro cannot shut down restart or log out. When click shut down restart or log out. it does NOTHING. no screen comes out, no window telling me that an application is stopping the shut down, just nothing. After I try several times to shut down, I can continue using my macbook normally as if I didnt try to shut down at all. What should I do? What is wrong?

    What happens when you press the power button? It should bring up a dialog box asking if you want to Restart, Sleep, Cancel, or Shutdown.
    Also, try it from the terminal prompt. The Terminal application is in the Utilities folder. The Utilities folder is in the Applications folder.
    Once you've launched Terminal, type:
    sudo shutdown -r now
    Enter your login password when prompted.
    This should initiate a reboot.

  • Laptop won't go to sleep mode and shut down properly.

    hello,           My name is Atul and i upgraded my laptop hp pavilion 15-p017tu from win 8.1 to win 10 on 29h july. My laptop was working great before the upgrade and before upgrading i updraded ( updated ) all the drivers and windows too.          so, after the upgrade i have been facing the same problem which has been shared by many peple here..i.e win doesn't go to sleep mode. In my case when ever i put the sys to sleep mode, the screen turns off but the power button doesn't blinks and i can't go back to the normal mode by using mouse curser or pressing the power button back. I have to physically shut down the system by pressing the power button for 5 seconds.         Also, my system won't shut down properly and it is the same as the sleep mode probem. I have contacted the customer care of microsoft and hp both and they did some setting changes but the problem keeps coming back. I have also told by the hp care that they will take atleast a month or two to fix this as this may be due to hardware not supporting the current driver so this might take time. They also told me to just downgrade to win 8.1 and after sometime when this poblem is fixed i can again install and upgrade win 10. If any of you guys know how to fix this problem do share it here.      thanks!!

    Hi ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15 p017tu Notebook and issues with the sleep mode and shut down not working correctly. Go into the Device Manger and go to display adapters. Update the driver. Select the Automatically search for updated drivers.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating after Windows 10 upgrades . I hope this helps. Thanks.

  • I disconnected my iphone before import was completed. Now I cannot shut down iphoto.  How do I force iphoto to shut down?

    I disconnected my iphone before import was completed. Now I cannot shut down iphoto.  How do I force iphoto to shut down?

    Click on the Apple in the top left corner of your screen and click Force Quit.

  • Cannot shut down my new Satellite notebook

    My new Satellite C series won't wake up. It's working but +screen is blank.+
    Worse I can't reboot because I +cannot shut down the machine+. User Man says hold on/off switch down for a period. But this does not turn off machine.
    User Manual otherwise useless.
    Help.

    The same thing has happened to me twice since I bought my Satellite L series notebook a few months ago.
    *The answer is to unplug the notebook if it is connected to an outlet, then remove the battery, wait for a few minutes, reinsert the battery, wait a few minutes, then restart the computer.*
    This has worked for me twice, but I wonder whether the fact that the screen turns black for no apparent reason while I am working at the computer means that something in the hardware is defective.

  • Mail won't open or quit so I cannot shut down my computer.Mail won't open or quit. computer won't shut down as a result

    Mail wont open or quit so I cannot shut down my computer

    Choose Force Quit from the Apple menu, select that application, and press the Force Quit button. If that doesn't work, save and close everything you can and use the Activity Monitor in the /Applications/Utilities/ folder to force quit the loginwindow process.
    (105346)

  • Macbookpro mail won't quit or open cannot shut down

    macbookpro mail wont quit or open and cannot shut down computer help?  my ipad is ok

    Hi elizabeth,
    Hold down the power button for 5-10 seconds to shut down, then try again.

  • HT1766 my iPad locked up and will not shut down

    my iPad has locked up and will not shut down, I have connected to lap top and it will not connect to itune

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • Can we put RAC database in Archivelog mode without shutting down

    All,
    Can we put RAC database in Archivelog mode without shutting down.
    Currently our new production database (2 node RAC) is in no archive log mode, Need to enable archive log in the database...
    I believe we need to set the cluster_database=false and then put the DB in archive log mode then we need to bounce the database to take effect...
    Just curious to know in 11gR2 ...Can we put the RAC database in archive log mode without any downtime ...?

    Even RAC or non-RAC, database should bounced and enable/disable archive log mode from mount status.

Maybe you are looking for