Screen is slightly blurry / has bad quality

I bought new Samsung 24" LCD monitor S24C300 and new video card Nvidia GT 630. Monitor is connected with DVI cable.
Problem is that when I'm using native resolution 1920 x 1080, the screen is really small and I have to use the DPI setting thing to make screen bigger, but, when I apply the DPI settings, some programs come annoying blurry.
At the resolution 1280 x 720 the screen is good size, but the text has slightly bad quality and is little blurry, so what to do?
I have adjusted the monitors sharpness settings and I also have ClearType on, but that doesn't help.
Could somebody help me with this issue? Thanks in advance!

Please first install the latest drivers for video and moniotr.
Some times a blurry screen can be caused by a poor cable, check with anothe if possible.
You can also try other port to test this issue, like HDMI.
I'd like to share the following articles with you as a convenience to yuo.
Getting the best display on your monitor
http://windows.microsoft.com/en-in/windows/getting-best-display-monitor#getting-best-display-monitor=windows-7
Ways to improve display quality
http://windows.microsoft.com/en-in/windows/improve-display-quality#1TC=windows-7
Regards
Yolanda
TechNet Community Support

Similar Messages

My exported 2015 iMovie file has bad quality.

Hello.
I just got a new MacBook pro, OS X Yosemite 10.10.3. Using iMovie 10.0.7 (the latest version to my knowledge.)
I realize that this question has been beaten to death all over the internet, but I haven't made any headway STILL. I just completed an edit that looks AMAZING in iMovie, and when I export it, the file is very distorted. I'm exporting at the highest quality (1080p) and the file ends up being 8GB (8 minute movie) which I would think a big file like that would produce good quality.
I'm stuck. Any help would be greatly appreciated.
Here's the upload (notice the distortion and grainy-ness during motion, again looks AMAZING in iMovie.)
https://www.youtube.com/watch?v=eeQ85ybI_II
Mike

iMovie file has bad quality.
hmmm, really?
I pick up a scene ...
<click for fullsize>
This is a 'killer' for any encoder! Those ultra-soft gradient in the sky shows no banding!
Not to say: superb! Compare to a less encoded version:
<click for fullsize>
you see? THAT is bad quality! Tons of banding in the sky...
... post a scene, which doesn't fullfill your standards …
btw: what camera in use? settings? a GoPro I assume, those 'cinema' settings?
PS: you let YT play it in as 720/1080? ....

A song I bought has bad quality, what do I do?

I bought 3 songs on iTunes and they have bad quality, I wanted to report a problem but when I did it automatically took me to my receipt... What should I do?

Try playing the files with Quicktime player. Is it really the files or is it iTunes?
If it is the files, contact iTunes Store support staff through the report a problem links in your account history or,
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html

Video import from AE to PP blurry and bad quality video.

Hi all, Im having a weird problem with AE cs6 and Premiere pro cs6. Whenever i import an AE to Premiere Pro, the quality becomes bad and blurry. When the project is rendered from AE to a video project (like QT) the quality is great. The videos I am working with are all HD and all my projects are using the size 720x480, so its not an issue of making the video bigger than what it is and thats the reason why it looks so bad. when i start a new project, i just click ok and go with the standard project settings. All videos that i just directly add into Premiere Pro look fine, only import AE projects look bad. Whats weird is when i double click an AE project i mported to premiere thats in the "project" tab, it opens in the "source" tab which allows you to trim, etc the video before adding it to your project and thats normal, anyways when it is in the "source" tab it is in its normal good quality but when i drag it to the sequence timeline in my project, thats when the quality goes down. So, what am i missing here? why would it be ok in the "source" tab but once added to the sequence it goes bad?

If this were my project I would create a different comp for each name by simply duplicating the comps in the Project Panel then changing the name. I would remove the background video, duplicate the comps, change the names, then render each title using the Render Cue or AME using the Lossless With Alpha preset. The rendered titles would be brought into PPro and added above appropriate shot in the sequence.
If you have CC 2014 I would work differently. I would create a Text Template in AE for Premiere Pro. This is a much more efficient workflow. Here's how: How to create text templates in After Effects for Premiere Pro | Adobe After Effects CC tutorials

My HP TrueVision Webcam has bad quality. How can i fix it via settings. If not why call it HD???????

I have a HP PAVILION DV7-6108EO
This question was solved.
View Solution.

Hi
Please find the link given below might help you to resolve your issue.
Fixing Webcam Problems in Windows
Adjusting the Webcam Settings to Improve the Video Quality
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

N95 has bad quality cover

I dont no whey NOKIA started to put this cover to this good phone,now i wendring too sell it out and returen back to N73.When i paid for the N95 $900.

Hi Alexey
I am sorry for your disappointment but please be advised that this is a user to user forum and will not elicit a response from Nokia. Please use "Contact us" at top right of your screen to bring this shortcoming to Nokia's attention
Happy to have helped forum in a small way with a Support Ratio = 37.0

Screen display is blurry or ripple effect when scrolling

I have a 15 inch 2.53 Pro and when I am in Safari the screen has a horizontal ripple effect across the screen when I am scrolling. This is slightly worse when I use the vertical scroll bar vs. two-finger scrolling. The overall effect is that the screen is slightly blurry and hard on the eyes to read until the scrolling is stopped. This is a new machine and I have just installed Word suite for students. Any suggestions? I have an iMac that is a few years old and this does not happen on it. Thanks.
Message was edited by:

Mine too have this on my new MBP ( September 2009).
It's more evident in Safari, but show also in finder while scrolling. It is not related to font antialiasing because enlarging page text in Safari (cmd +) the blurry effect is still there.
I'm very disappointed of lcd screen quality, too much fatigue to eyes.
Could be considered a screen hardware defect?
Message was edited by: fascox

ACNS 5.5 / Troubleshooting bad quality VIDEO (MMS-over-http)

Hello community,
For an unexplanable reason I have to deal with an ACNS problem which is not my domain at all ! ACNS 5.5.15 is on a WAE-512-K9 working with CDM.
Please can someone advice me on how to start the basic troubleshooting steps on the following issue :
============================
- Users in Sydney are complaining of bad quality when they watch a video from an Intranet server in Frankfurt.
Video flow has bad quality (buffering ..) and/or stops before the end of the video.
- Users browsers are configured to use the WAE as local proxy on ports 3129 (.pac file). Requested Video on the intranet is in the Windows Media format and flows are MMS-over-http.
- No multicast distribution is used, neither content pre-positioning.
============================
We did a wireshark trace on the user PC watching a video which ends up unexpectidely with error code 500 => We follow the TCP stream, Time/Sequence graph is linear until ACNS sent [PSH,ACK] tcp flags to the user PC. Then PC answers with [FIN, ACK] etc...and the stream ends.
I have checked the show-tech (i have attached some commands from the sh tech) especially TCP statistics but I do not if the values are normal or not.
I am thinkink to open a TAC case but before contacting Cisco I prefer to try some basic tests if they can help.
Any recommendation on how to start a troubleshoot or any advice would be gretly appreciated.
Thanks.
Karim

Hi Defcom,
Thanks for the quick reply. I have tried changing and resetting the bandwidth limits at both ends last week at both ends but no joy!
I am going to try the solution on the Gerry's link above later but have to wait for my brother to be free as he has an airport as well(had a baby yesterday (hence why we are setting this up)).
Dave

Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do

Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do??

I had the same problem on my iPad v2 IOS 7. But it sorted itself after a hard reset (power and home button) followed by a soft rest ( just power) . I lost all sound at this point. Then restarted again with a hard reset.
Hope that fixes your iPad v2
Mo

I get bad quality like blurry videos and photos on internet

Whenever i go on the internet and see videos or photos on any site it shows them in a bad quality and when i asked around other people they said the video looked just fine and it was only me. I dont know how to fix it. Anyone Help?

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Does anyone experienced bad quality when burning a DVD?

Does anyone experienced bad quality when burning a DVD?
Using OS 10.6.8 and Magiv Video in iDVD, I am having a hard time creating a decent DVD. The videos per se are fine, but the intro menu and menu text and images are extremely poor quality and hard to read. What is going on?

Hi my notes on this - might be of help
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser and as Large (NOT HD or other resolutiona as result will suffer) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

[SOLVED] Logo on the website in bad quality?

Hello,
Since some days I've noticed that the logo on the website is very bad quality:
Screenshot taken in debian lenny (at the office) with iceweasel 3.0.1
Has something changed or am I or my setup to blame?
Zl.
/EDIT: the img-tags on the forum seem to enlarge the image, also worsening the image quality AND giving the impressions my whole screen is F***ed. No such thing though: only the image itself has jagged edges...
Last edited by zenlord (2008-08-28 09:40:19)

Dusty wrote:
Hmmm, maybe we should have a slightly higher resolution image here to cover the 'normal' range of font sizes.... Thayer?
Dusty
Sounds great in theory, but unfortunately the logo would then looked squished when viewed at normal font sizes (e.g. false resizing).

The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished.

The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished. It seems to be a bad contact, it would not be normal for a quality product that should have, he has less than two years of use. Not because of the bad use or crash. Someone with the same problem or can help me? It's really a contact problem? I've done all the procedures recommended by the online support. Thanks.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Bad quality preview via HDMI

Hello together!
After searching for days in the www and on this board I hope somebody here knows a solution for this problem:
Im looking for a quality solution to preview the program monitor as a full screen picture on my Panasonic HD-Ready TV. I got it running, but there is a really strange quality problem:
When I just use the TV as a second Windows display and I move the program monitor onto it (no full screen but at 100% display level) the preview looks nice but I can not see the complete picture, because 1280x720 plus the program monitor itself is too big for my screen When I change the display size of the program monitor to something lower than 100% the scaling looks very bad higher than 100% no problem with scaling.
So this is my problem:
When I switch it in the playback settings to playback on extern monitor to view it full screen there is a problem. Diagonal lines get a bad looking aliasing. My idea was that CS3 is scaling something (and this does the program not as good as I tried the preview with trailversions of Edius5 or Vegas8c). Just at 100% CS3 preview looks nice (the same when I just watch the program monitor on the Notebook display).
My Nvidia Card is set to HDMI 720p output. The TV says it is a 720p signal what is coming form my HDMI cable, and last but not least my footage is also filmed in 720p60 (Sony Ex1) and I used the 720p60 EX1 setting in CS3.
So again, when I just watch these clips for example with the Sony clip browser on my TV (also form this Notebook via the same HDMI output) the diagonal lines start not to flicker and are displayed very sharp. So it cant be the graphic card, the TV or the footage at my knowledge.
So why does CS3 scale there something in the full screen preview although from input to output everything is in 720p? Furthermore why is the scale in such a bad quality (Edius does this perfect so maybe I have just a wrong setting somewhere in my CS3 settings). Is CS3 not using the graphic card for scaling?
My system:
Asus V1S Notebook
NVidia GeForce 8600M GT 512MB
Duo T7500
2GB Ram
Windows Vista
Hope somebody here is able to find a solution for this problem, because I dont want to buy an extra video board (like Axio) for it.
Best wishes,
Swen

But often with these cards, you can not work in the CS3 normal nativ settings for Ex1 footage.
At my knowldge when I would like to open a project which with a Blackmagic Card for example and I like to finish the editing on an other computer without that card you'll have a problem (because BM or other cards allway use their own presett window-right?). So you lose a lot of flexibilty by using a card or a third party codec like this. So it's not so future proof as just to work with the NLE Software itself.
I see this now with my old Premiere 6.5 Projects. I used a Canopus Raptor RT2 for this with the Canopus codec. That worked very very well, but now I can't use this project anylonger on a new editing CS3 station, because it doens't support these Canopus transitions and codecs. Also the only Windows Notebook based output solution is the MotuV4 box... not a very cost effectiv solution for a preview.
So again. There must be a sloution to get the problem with the diagonal lines fixed. Why does CS3 scale the preview when 720p footage should be displayed over a 720p output onto a 720p Monitor? No need for scaling? Or am I wrong with this?

Bad quality of web images X1 Carbon 2015

All images (especially the small ones) and icons from internet and some applications have very bad quality as if they had very low resolution. For example, all avatars on Facebook look really bad, I can hardly recognize people. The same holds for all logos and banners with text images. I understand that the images get distorted because of extremely high resolution of the display (2560x1440) - by the way normal text and all Windows images have excellent clarity - however I can hardly beleive that a 2000 EUR machine is not able to provide appropriate image quality even for simle internet surfing! Is that a fact you have to accept when having 2560x1440 or is it somehow possible to get normal image quality? (Otherwise I'll return the laptop).

Here is a screen shot of how it looks like when you open private modus in IE.
At the top you see the blue block [InPrivate] in excellent quality and at the bottom you see how the same thing is displayed when it's an image. Actually both should look the same.

Screen is slightly blurry / has bad quality

Similar Messages

Maybe you are looking for