Screen is washed out

Home screen became washed out after dropping phone, how do I reset?

Hello Kevin.
Apple will cover anything that is not accidental damage, or lost or stolen. As long as you are within the 1 year warranty 2 years if you have Apple Care Protection Plan.
To learn more about the iPhone warranty visit the link below.
iPhone Service: Frequently Asked Questions
http://www.apple.com/support/iphone/service/faq/index.html
iPhone Out-of-Warranty Battery Replacement Program Frequently Asked Questions
http://www.apple.com/support/iphone/service/battery/
Apple One (1) Year Limited Warranty
http://images.apple.com/legal/warranty/docs/iphone.pdf

Similar Messages

  • Downloaded the OSX 10.9.1 software & my screen is washed out/pixelated. Any help?

    I'm not sure what happened to my display. I 've tried to re-configure it and it's still washed out. I've restarted my mac and also ran a harddrive check. Any help would be much appreciated! Thanks!

    Been there, done that. Here are some steps that I took to solve this.
    Unplug your monitor, wait a bit, plug it back in.
    With the monitor onscreen controls, reset it to factory defaults
    In System Preferences > Displays > Color tab > Calibrate your monitor
    Boot your Mac in Safe Boot mode. Contrary to some posts, it does work in Mavericks.
    Depending on your monitor manufacturer, this may or may not resolve the excessive washed out appearance. Right now, my Dell 2405FPW looks good via a displayPort to DVI cable.

  • Ipad mini retina screen colours washed out?. Apple has already fixed the issue?

    Hi everyone
    First of all, sorry if i dont write in the best way, i am from Spain and my elglish is medium-basic.
    I am looking to buy an Ipad mini with retina display.
    I readed many reviews from december 2013 that say thar ipad mini 2 screen only covers 63% of adobe srgb colour gamut. Nexus 7 covers 100%
    All this issues where noticed on the end of 2013. I want to know if this is fixed or the problem continues now
    Those of you who have an ipad mini and ipad air too, Can you compare and say me if you notice any colour issue. your ipad mini have to be bought on 2014 becouse its known that ipad mini retina 2013 have the issue.
    Thank! regards

    mdesignffm wrote:
    in terms of colours, i cannot see much difference except saturation being a bit lower on the iPad mini.
    I will agree with this. I have an iPad 3, an iPad 4, an iPad mini (1st gen) and an iPad mini Retina. Direct comparison between the devices reveals lack of color saturation on the mini Retina but it's not as bad as some may make it out to be. I'll also agree about it's looking more natural compared to the others, especialy compared to the iPad 3 & iPad 4 which can almost seem a bit on the garish side as far as saturation goes. It's almost (but not quite) like buying a new LCD TV and using it's default picture setting which is almost always "Dynamic"...and what the stores set it to to get them to "pop" on the display wall. It's nowhere near being a natural image. As was mentioned, yes the saturation is a bit diminished on the mini Retina but I wouldn't consider it much of an issue...
    That being said, I don't know if it has been "corrected" since I don't consider it much of an issue to begin with.

  • Washed out PINK screen

    Nearly everytime I turn on my TV and fios DVR the screen is washed out in a red / purple / pink color.  I have to reboot the STB every day.  I called support and they did a remote firmware download but it has not fixed the problem.
    A reboot always fixes it but is there a more permanent fix?
    The support website does not seem to be working for me today either so can someone post the technical support phone number please too.
    Thanks
    Andy

    In my situation using an HDMI connection to watch an HD channel the picture goes to purple when a local non-HD commercial comes on.  The HDMI signal from the DVR seems to get confused and shorts out when being forced to translate an HD picture one moment and then to a non-HD small format commercial in the next moment.  The only way to correct it is to power down my receiver or DVR and power up again.  I am forced to do that 10 times an hour in some cases.  I ahve tried a new DVR, new HDMI cable, new receiver and nothing changes.  I do not know if it is a unique problem to FIOS or what.  Any ideas?

  • Has anyone else noticed that colors are washed out on screen on the white iPhone?

    Comparing the white and black iPhone 4 side by side, I noticed that colors on the screen are washed out on the white iPhone. This is clearly noticable when clicking on messages and looking at the top where the word messages appears in blue/gray color. When looking at this on the white iPhone, its more white than blue/gray.

    It could be just the contrast in color with your eyes looking at the white iphone vs the black one. Your eyes can sometimes play tricks on you. But in all seriousness, iPhone screens vary in color temperatures. I have seen two black iphones 4s that looked like they had different displays in them.

  • IMac 20" vs iMac 24" : screen WASHED OUT on 20"

    I went to two Apple stores and I noticed that the new Aluminum iMac 20" SCREEN CONTRAST is set different from the 24".
    I tried using two side by side 20" and 24" and I set the screen settings the same. But not matter what I did the contrast on the 20" was pretty bad. 24" was normal but the 20" was Washed out (when viewing photos, there's no detail in the highlight areas).
    Anyone else notice this? Or it just me? I foun this at two stores I went to.

    GREAT! I thought I'd read all of the down sides to the new 20" iMacs. How'd I miss this? Well, I knew that with the minor CUP speed bump made to the new iMacs and no "Extreme" option on the 20" I was about to take a beating down the road here...very shortly. That "shortly" is already NOW, I guess. My 20" screen was washed out using the iMac's display color setting, so I went into Preferences/Display/Color and played with the RGB profile settings. This helped a lot, but it made me wonder why Apple would have let it be shipped with their poor "iMac" color profile. Geez, I hope changing the setting, making the screen colors pop, won't burn out this monitor!!! GULP!!! If only our old Mac G4 tower hadn't died a few months back, we'd been waiting so long already and a 20" monitor looked big enough to us.
    BTW, where are all of my Apple Loops in the preinstalled iLife '08 GarageBand? I just got this iMac yesterday. Time to do more digging!
    Kat

  • Upgrade to 10.6.7 Fans full blast and Screen washed out

    Update went well but after restart, the icons, finder windows, system preferences all look washed out. It is almost like they are 8 bit color not 24 bit color. At the same time the fans go crazy at login and then settle down later. Logged in with Safe Mode and it did not change anything. I reinstalled from Combo, still no joy. Any ideas?

    Update: The fans seem to have settled down, maybe it was an update to Spotlight?
    Screen still washed out. It looks like when you attach an external monitor and you do not have the cable fully set. In Finder, you don't see light gray lines, in Excel, you don't see the grid. You could also say that the resolution is not at "millions of colors" but at 256 or less.

  • Washed out screen in iPhone 3G - after upgrade to iOS 5.0.1

    I have an older iPhone 3GS. Have been very happy for 18 months. Recently upgraded to iOS 5.0.1.  Immediately afterwards, I started having a washed out screen.  It was intermittent at first, but now the screen is washed out all the time.  The problem started immediately after the iOS upgrade, so it's clearly a software or firmware issue - not glue curing. Any ideas how to get back to the crisp white screen, or go back to iOS 5.0?

    I have an identical problem. Apple recommends doing USB troubleshooting and checking to see if security software is causing the problem. http://support.apple.com/kb/TS3694
    In my case, neither helped.

  • Washed out colors

    I have a new iMac 27" with the
    AMD Radeon HD 6970M 2048 MB
    graphics card.
    Since a few days I find that some screens have washed out colors (see pictures). Has anybody seen this?
    Also the command bar is almost invisible.
    Jan

    Contact AppleCare ASAP, the phone number is in your manual. If you cannot find your manual then use the AppleCare Contact Info link.

  • MacBook Pro starts off in blue washed out tint then goes to grey screen

    So I took out the stock HDD and replace it with a SSD and the laptop with working better then ever. Then later on at night I used the thunderbolt plug to connect it to a TV. After about 5 min the computer froze so I restarted it. But now when it reboots the screen has a blue washed out look. It won't open into OS X, instead the apple logo comes then the screen turns into a solid grey. It recognizes the SSD when I hold option but won't open it up. So I put the HDD back in and it does the same thing. 
    My MacBook Pro is an early 2011 15 inch with anti glare display
    I'm pretty sure it was running on Mountain Lion because I didn't get a chance to upgrade to Mavericks yet.
    The SSD is a 960 Crucial SSD.
    I am past warranty with Apple Care so is there anything I can do to fix this?

    #2 NVRAM reset
    ..Step by Step to fix your Mac
    Use TRIM Enabler on your third party SSD over at MacUpdate.com to enable TRIM in system profiler to check.
    Right or control key click to open past Gatekeeper.

  • 17" Imac core 2 duo cheap one washed out screen

    Just got the $999 imac. The screen looks somewhat washed out. I have it next to my macbook which is hooked up to a Dell external monitor and the icons and everythgin looks much more washed out then on the dell monitor.
    Is there a way to chage the color. The color is more vivid on the dell. and the shadows etc are darker.

    Go to system preferences, select displays, select color, and try another profile.

  • How come start up screen colors look washed out.

    Hi,
    I tried to change the background for the login startup screen on my iMac.  I noticed that the colors from my image appears faded. 
    When I look at the image in other origram(ie. preview) the colors are what they should be.
    So what is OS X(Lion) doing to cause the colrs to look this  way?  And is there a way to fix it?
    Thanks and I look forward to your reply.
    ...Bruce

    I had this problem with my R705 too.  It has to do with one of the bloatware that is already installed from the factory.  The reason that I say this is because after I put in a ssd and did a clean install without any of the bloatware, I don't get the washed out screen effect anymore.  Now which one of the bloatware is responsible for this, i couldn't tell you.

  • Washed out iPhone 5 screen

    This happens when I try and unlock my screen.Occasionally, the screen will be very faded looking. Not bright like an autobright overadjustment, just unsaturated and hazy. Washed out and cloudy, it often dissipates slowly over about 30 seconds to a minute after seeing it or even after locking and unlocking the screen several times. It eventually goes back to normal, but it's something that I definitely notice happening.
    Has anyone else seen this? I tried taking a screen shot of this but the picture was clear when the screen was clear.

    Worth noting that the i5 has an ambient light sensor next to the front side camera. It briefly samples the environment when it wakes up and adjusts the screen accordingly. If something is blocking the sensor at that time, the phone will think it is in a dark room and barely light up the display. Once the adjustment is made, no further changes occur, so it will remain dim till next unlock.

  • "Washed out" screen after waking from sleep?

    Over the past couple of months, when either waking from sleep or coming off the screen saver, the display has a washed out look to it. The colors can be restored by either reinitializing the screen saver or putting the computer to sleep and waking it back up again. I tried the PRAM and PMU resets with no success. The problem seems to be getting worse. (more frequent) Any ideas, suggestions would be appreciated.

    hey, just adding my story to yours cause it seems to be a similar issue.
    Every now and the when My MBP wakes from sleep or screensaver, the screen seems to lose its calibration, it gets all blueish. When I go to Display preferences to see what's there, the computer sort of recovers from the flaw and loads proper colors. I can almost her it say Oh yeah, color calibration!..

  • Screen or backlight problem - washed-out colors, fuzzy white overlay

    I've had my iPod for quite a long time now and have been living with this problem for at least a year. Some times, when I start using the iPod, the screen gets all washed-out with a fuzzy white overlay. It looks fine when the backlight turns off from not touching it, so I think the problem might be with the backlight. If I completely recharge the iPod, letting it fully turn off, the screen will usually come back to clarity. Also, if I leave it in the refrigerator for a while, that too will often solve the problem.
    The fuzziness usually happens after having the iPod go to sleep - either from me pressing and holding the pause button, or from the songs being stopped or paused and the iPod not being used for a time. I don't recall, but it might also happen when playing if it's been playing for a fair time and the backlight has been off. It seems like, if the iPod goes into sleep mode when it is warm - room temperature or greater seems to do it - it's fuzzy the next time I start using it. Having it fix itself from being outside in the cold, in the refrigerator or in the basement seems to suggest it as being a heat-related problem.
    So, what part do you think is causing this problem? A light? The screen? A chip or connection somewhere?
    Are there others out there with this problem? It's rather upsetting, as I like to watch videos and play games on it but I can't rely on it having a clear screen.

    All the things that my iPod has been through (in no particular order):
    - Age; I've had the iPod pretty much since they came out
    - Manufacturing problem or Firmware update bugs; I've survived a multitude of problems in the past (seemingly bricked being stuck in a loop of trying to turn on, the videos don't play video or sound problem, the not-recognised-by-iTunes problem, not being recognised by the iPod updater)
    - Slight bending and pressure from by carrying it in my pants pockets (front and back) on occasion over the years
    - Damage from being dropped on occasion
    - Possible damage from being used in a hot, smokey environment for months
    - Being exposed to heat or static from fuzzy jacket pockets
    - Being exposed to heat from my waterbed
    - Being exposed to cold over some very cold winter days
    - Pressure and scratching from a plastic shell I bought to protect it, which turned out to be a very bad idea as it caused many scratches to the screen and may have been too tight as the lcd was showing distortion with it on
    - Probably got some water on it a few times
    Thinking back to when I first had this problem, the causes may be one of:
    - Possible damage from being used in a hot, smokey environment for months
    - Being exposed to heat or static from fuzzy jacket pockets
    - Being exposed to cold over some very cold winter days
    - Probably got some water on it a few times
    - Age; I've had the iPod pretty much since they came out

Maybe you are looking for

  • Sender File Adapter - Fixed Length

    We have a Fixed File(Sender). With 3 fields. NO Header. Space is the separator for each fields VendorNumber  10 bytes VendorName    10 bytes City           5 bytes In the File we can have multiple records. The Root Node is Vendor. I am trying to defi

  • Error install planning 9.3.1

    I need help installing Hyperion planning 9.3.1 version, I have installed Hyperion Essbase and shared services to the datasource when I enter values in the Essbase server is left wondering not continue to the next step. and validate the connection wit

  • Where to post Architecture question regarding Hyp Plan/Essbase installation

    *1st Installation (uses HypDB1 and Hypapp1 server) ----- PRODUCTION* Server HypDB1: <------ Server Hypapp1 ESSBASE1 Hyp Plan1 HYP Shared Service1 Studio1 EAS1 Apache ODI Workspace1 Oracle 11g *2nd Installation (uses HypDB2 and Hypapp2 server BUT Shar

  • Installing CS3 Upgrade on new machine? CS2 registered user on old machine

    I was wondering if I would be able to install a CS3 Upgrade on a new iMac I plan to purchase....I have a fully registered CS2 version on my current iMac, so therefore I think I'd be eligible to only purchase the upgrade...but would I need to install

  • Creating contents page for pdf/rdf

    I have several reports that our anchored together. I want to create a contents page that gives me page numbers of the serveral anchored reports. example one report has a list of cars the next anchored report list trucks, the next is boats, etc... I w