Screen is white, what does this problem note mean?

My screen went blank and was shaking but recovered on button shutdown and restart ... several days later it went to white/gray vertical lines with same recovery... today it went blank and will not recover... the apple and the progress circle did appear but then nothing else.
Immediately after recovering from the 2nd incident this message appeared, which I grabbed (and sent to Apple). Can someone tell me what the problem likely is or, at least, whether it is one with hardware or software?

Sorry, that is the wrong OS ... I am on the latest version of Mavericks.
Also, searching "white screen" I have now learned it is likely due to a "kernel panic" most often caused by conflicting software ... ( I just updated OS X, Numbers, Pages, and Keynote + WindowMizer ... and still had the old iWorks folder in the App folder ... could be other cause though too. )
Here is the most helpful article I found:
file:///Users/michael/Desktop/OS%20X-%20When%20your%20computer%20spontaneously%2 0restarts%20or%20displays%20%22Your%20computer%20restarted%20because%20of%20a%20 pr….webloc
If you get in this case that explanatory window, don't choose the "more info" option because you will just get the obscure message I posted ... rather, choose to let the conflicting software be automatically trashed. Otherwise you cannot get back to that option, and/or can't get back to your desktop, and would have no idea what the conflict was.

Similar Messages

My ipad mini is displaying a pad lock with a circled arrow around it and the screen is white. what does this mean?

my iPad mini is displaying a padlock with a circled arrow around it. what does this mean?

The padlock with the circled arrow around it means the orientation lock is on & the screen will not change from portrait or landscape mode when you rotate your device.

What does this error message mean? disc recording not found

What does this error message mean? disc recording not found

Often it suggests issues with device filters in your registry. But it's probably best to check the situation more closely.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found: /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder. You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again. This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do. The article on how to do this is here. (http://www.apple.com/macosx/recovery/) I have had to do this before and it works like a charm. It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
Product and Software: This article applies to AP-105.
The root cause of this error is that the AP cannot perform a code upgrade.
Scenario 1
Check the ArubaOS code.
The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
Scenario 2
If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
Scenario 3
The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
apboot> setenv ipaddr <ip address>
apboot> setenv netmask <netmask>
apboot> setenv gatewayip <ip address of the gateway>
apboot> setenv master <ip address of the master>
apboot> setenv serverip <ip address of the TFTP server>
apboot> setenv bootcmd tftp
apboot> save
apboot> boot
Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
Built: 2011-01-07 at 13:42:04Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
DHCP broadcast 1
DHCP IP address: 192.168.x.xx
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.x.xx
DHCP DNS server: 192.168.x.xx
DHCP DNS domain: xx
ADP multicast 1
ADP broadcast 1
ADP multicast 2
checksum bad
ADP broadcast 2
checksum bad
ADP multicast 3
checksum bad
checksum bad
checksum badRetry count exceeded
DNS request 1 for aruba-master to 192.168.x.xx
checksum bad
checksum bad
checksum bad
T Using eth0 device
TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: checksum bad
T T checksum bad
T checksum bad
checksum bad
checksum bad
T checksum bad
checksum bad
T T checksum bad
T checksum bad
checksum bad
T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum badARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplexchecksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad ThanKs :)

What does this message icon mean on a blackberry?

What does this message icon mean on a blackberry? so when i send a text message it normally place a check mark with a small D above it. But i just got one with just a check mark, with no D above it. and i was wondering what it meant? oh and i have the blackberry tour, but it may be the same on all blackberry phones.

check means sent over network
D means delivered.
R means read.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

TS1846 What does this error message mean?

What does this error message mean? I am trying to burn a project to DVD...
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

The project is 1:22:30 - 1080P HD (4.9GB)...I am using the share drop down and hitting DVD...I am using a DVD+R Dual Layer 8.5GB...It processes for about an hour and a half the status bar gets almost done and then the error message comes up...thanks for any help you can give me

What does this Bridge message mean?

I have a new Mac (and Photoshop Elements 11) and when I open Bridge I get this message:
OLSException in OLS Adapter Startup
/OLS/development/main/bridge/3.2.0/build/mac/../../sdk/src/COLS.cpp#19 : 16
Should I be worried?
(I've tried using PSE Organizer and I hate it. I'd rather stick with Bridge unless I'm headed for trouble.)
What does this Bridge message mean?

Bridge came with an earlier version of PSE, PSE6 I think. The Organizer comes with PSE 9 and PSE11. Like some other PSE users, I much prefer Bridge to the Organizer. I had no trouble using Bridge with PSE9 and an older Mac. But with PSE11 and my new Mac, I started getting this message. I wonder if anyone knows what this message means, if it portends trouble for me, if there is anything I should do to correct it?
I posted this question on the Elements Forum and was told that it should be addressed on the Bridge Forum.

TS1702 0xE8000004-what does this error message mean?

0xE8000004-what does this error message mean? I get it when trying to sync my Garmin USA app.

See http://support.apple.com/kb/TS3221.

What does this error message mean? MFMessageErrorDomain error 1028.

What does this error message mean?
MFMessageErrorDomain error 1028.
I can't seem to delete a message from my mailbox. The above error message comes up every time and the message then reappears in my inbox.

Back up all data. Rebuild the mailbox. Try to delete the message again. If you still can't, continue.
From the Mail menu bar, select
Mail > Preferences > Accounts > Advanced
From the menu labeled
Keep copies of messages for offline viewing
choose
Don't keep copies of any messages
Close the window and save the change. Relaunch Mail and test.

I have many photos that are visible as thumbnails in the Pictures Library, however when I try to open them in a big screen they show a back screen with an exclamation mark in a triangle. What does this exclamation mark mean ?

I can see my images in the libarary as thumbnails but when i try to edit/email some of them become Exclamation Marks in a triangle.
What does the exclamation mark mean and how to i retrieve the photo

The exclamation make is an indication that iPhoto has broken the file path to the original photo.
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

What does this error message mean? (link to picture)

My MacBook has been not working very well this morning, so I did the verify disk thing and it returned the message that something was corrupt and I had to start up from the Mac OS X installation DVD and repair the disk. What does the message here mean?

OK, I'll try: it means that there's a missing directory record; that is, there's an item in the directory pointing to a record that doesn't exist. What else can I tell you? All such errors need repairing.

What does this popup message mean that I have been getting since the update

I got the update the other day and now when I open some of my projects this message pops up twice
"the previous selected audio interface is not available. Built in audio input and outputs of the computer will be used instead for this session".
What does this mean? How will it affect my project? or should I just ignore it. I am assuming this must be caused by the new update, since it did it the next day when I opened one of my projects. thanks

You could try to re-select your audio input and output settings under "Preferences > Audio" then save your song, quit and re-launch, and see if the message disappears. Maybe the update did something to your previous audio settings.
Hopefully this helps.
- Jay

What does this log entry mean - Cancel initiated for Exchange Producer

Is there anybody who can tell me what could this log entry mean:
--Cancel initiated for Exchange Producer: <<66800621>> DbGateway Exchange*
I'm asking because I have problem. In two physical sources (physical databases) I have two tables TABLE_1 has 60k rows TABLE_2 has 1 row. Next step these tables are "Binary Join" by BI server
so it looks like here:
-------------------- Sending query to database named OBI (id: <<66800621>>):
select T7101.SYMBOL as c1,
T7101.TABLE_1 as c2
from
TABLE_1 T7101 /* TABLE_1_ALIAS */
order by c2
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Sending query to database named OBI_BACK (id: <<66800638>>):
select T46142.KATEGORIA as c1,
T46142.FIRMANO as c2
from
TABLE_2 T46142
order by c2
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800638>>, Close Row Count = 1, Row Width = 24 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Cancel initiated for Exchange Producer: <<66800621>> DbGateway Exchange
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800621>> DbGateway Exchange, Close Row Count = 3, Row Width = 80 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800638>> DbGateway Exchange, Close Row Count = 1, Row Width = 24 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800654>> Binary Join, Close Row Count = 0, Row Width = 104 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800582>> Projection, Close Row Count = 0, Row Width = 76 bytes
As you see first is executed select from TABLE_2 (Node: <<66800638>>, Close Row Count = 1) and this is correct number of close row count
next we have
Cancel initiated for Exchange Producer:(for node with SELECT ROM TABLE_2) - and I don't know what that's mean
and after this we have
Execution Node: <<66800621>> DbGateway Exchange, Close Row Count = 3
And this is incorrect number of CloseRowCount (should be aprox. 60k)
Finally result is wrong because we have no records (inner join by BI Server doesn't work :( )
Thank you for help
Edited by: markog on Mar 3, 2010 2:03 PM

I'm wrestling with getting all of this to work myself.
Can you see the job in XGrid Admin? It sounds as if the job is failing, but I can't be sure. Clicking on the job in XGrid Admin should give you a "play by play" and tell you where it is failing.
My experience has shown me that permissions is the root cause of alot of issues, and I cannot find any clear reference on what permissions the "Podcasts" folder needs to make all of this work.
Following the documentation, the "pcastxgrid" user doesn't actually get assigned any permissions via the file system or Group membership, so I'm not sure how all of this needs to be set.
Hope this helps.

My screen is white. what does that mean?

What does it mean when the screen goes white and none of the "pushing of buttons" work?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Screen is white, what does this problem note mean?

Similar Messages

Maybe you are looking for