Screen isn't working, but the ipod does!

the screen is totally black with a lime green line and a blue line next to it on the left side.
i click menu a lot..scroll down four times and press the center button to shuffle my music.
to switch to the next song i have to press the next button like 5 times.
i can use it fine that way, but i cant view anything at all.
is there anyway i can fix the screen?
its not cracked, broken or leaking.
thanks.

oboewan,
I have the old Classic Nano Ipod and I was having the same problem. The display had actually frozen on the song that had been playing. I could fast forward to the next song and rewind to the previous song, but I could not see what was happening. I tried what you said, *+"Try a reset (flip the hold switch on and off, then hold the Menu and Center buttons one finger on one button, one on the other for 6-8 seconds http://the Apple logo should appear, but this might not be an option for you.)"+ It worked!! My classic Ipod Nano display is working just fine now. I guess I can cancel my appoint with the "Genius" at the Apple Store. You're awesom!! Thanks So Much!!

Similar Messages

  • HT5622 Do you think that apple would exchange my ipod gen 5 for another one because this one well, the screen isn't broken but the inside is half black and other colors? When it happened it was in its otter box, and i lost the receipt and got it on may?

    Do you think that apple would exchange my ipod gen 5 for another one because this one well, the screen isn't broken but the inside is half black and other colors? When it happened it was in its otter box, and i lost the receipt and got it on may? How much do you think it would cost please help me.

    If covered by warranty. See:
    Apple - Support - Check Your Service and Support Coverage
    Then if the iPod is within warranty, not abused Apple will exchange it at no cost. You can do it at an Apple store
    Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • IPad3 Speaker isn't working but the headphone is working fine.

    iPad3 Speaker isn't working but the headphone is working fine. I have resetted the all settings and restore to old backup also but it doesn't work.
    Let me know the steps to resolve the issue!

    Check System Preferences > Network > active connection > Proxies tab. Are there proxy servers enabled? If you aren't behind a proxy server (which you probably aren't), uncheck those boxes. (Firefox bypasses the OS's proxy settings, so it's not affected by those settings.)
    Hope this helps...

  • Curve 8520 screen isn't working, but everything else is.

    All night my curve has been making the noise when you put the charger inside and pull it out.
    I woke up this morning and the screen was white, but the led was still working which meant i had a text.
    I pressed jut about everything and the screen wasn't changing so I took the battery out for 30 seconds, put it back in, waited for the device to re-boot and it turned on, the keyboard lit up, the LED was working and it made the noise when it was turned on.
    I tried this process again but with the charger plugged in and it still wasn't working.
    If anyone knows how to resolve this it would be a great help 
    Thanks

    Try following these steps: http://www.apple.com/support/ipod/five_rs/nano2gen/#

  • HT4864 I use Outlook 2011 for Mac. My @me works but the @ mac does not.

    I use Outlook 2011 for Mac on a 2011 MacBook Pro. My @me mail works but my @mac mail does not.

    I'm not familiar with your Bose but perhaps the phone is muting the music so you can hear the call.

  • My iphone 5s screen won't work but the touch screen works perfectly...I've tried resetting it several times but it  continues to stay black. How can I fix this?

    Iphone screen is black but the touch screen works and everything else, I just can't see anything on the screen . I tried resetting it but that did nothing.

    You held down the home & power buttons until the Apple logo appeared? This could take as long as 30 seconds or more.

  • Help! my screen is not working but my ipod still plays music

    my ipod screen is not working - i can get music to play and the backlight still comes on when i press menu i just can't c any writing. I have charged it for hours and reset it. What is wrong with it???

    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Itunes comes up an the store works but the library does not

    tried to update itunes that failed,, have uninstalled an reinstalled,, itunes wont come up,, when i use a restore point to go to an older version itunes comes up,, but,,, the store works,, when i try to go to my library it is stuck on my movies,, if i try to change to something else it shuts down,, i searxh my music on the toolbar but when i click on my music itunesshuts down,, afraid to plug my phone into it so not sure how that will work
    am running windows 7
    latest version of itunes untill this last update an everythin went to heck
    also when tried to reinstall it tells me moblile device not found,, so ihave to ignore that to install...

    Gave it a look, tried all the troubleshooting. My IP addresses are the same, so now I really don't understand. I'm just super confused. If it hadn't ever worked, I would just write it off as my university network being too strict... but now that it has worked once and really... nothing changed... I am just very confused.

  • A recording that works but the lsmw does not

    Hi,
       I have created a recording of the process which successfully changes the collection specialist in the collections managemenet role in the BP transaction.
    When I process data using this recording in lsmw the batch runs fine and tells me that all transactions processed successfully. However on checking the business partners none of the changes have in fact saved.
    Running the batch in foreground flows exactly the same as performing the manual change with the exception that there is no success message at the botton of the screen after the save button is pressed.
    Has anyone seen this behaviour before and know how to get the transactions to save correctly in SM35?
    kind regards,
    Ross Goodman

    Hi Rahul,
                 I have recorded transaction BP. I just noticed too that in fact the last transaction always saves to the database, but all transactions before that report as running fine in SM35 but in fact make no change. In lsmw when you look at the process log all the "BP nnnnn was changed" messages refer to the bp in the last transaction!!
    Ross

  • Connected monitor works, but the comp. does not  "see" it

    ello,
    When i plug in a monitor it will clone the display, but system prefs only shows the laptop LCD

    Hello, I believe that is the case when the Display is "Mirrored"... how else could it be? You can't change the Rez or Depth of one without the other, can't drag the MenyBar/Dock to the other one!
    If they are Extended Displays, they do show up as separate ones.
    They're essentially one Monitor when Mirrored.

  • I have an ipod touch 8gb that is disabled. on the screen it reads ipod disabled connect to itunes. But when i connect it to itunes, it says that it cant work with the ipod because it is locked with a passcode. what now?

    I have an ipod touch 8gb that is disabled. on the screen it reads ipod disabled connect to itunes. But when i connect it to itunes, it says that it cant work with the ipod because it is locked with a passcode. what now?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    The previous responses did not say how to place in recovery mode or DFU mode

  • HT1212 I just bought a used i pod touch from work but the screen says Ipod is disabled, how do i clear that to get back and enter in the passcode

    I just bought a used i pod touch from work but the screen says Ipod is disabled, how do I clear that to get back and eneter in the passcode?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I replaced the screen of my ipod touch 4 gen the screen is working but the touch is not working what do you think that i break please help

    i just replaced the screen of my ipod touch 4 gen and is working but the touch is not working i took it to a placed call you break it i fix it they told that is was a part that they cant change is a board or something like please help me cant i found that part or is another part like the ribbon cable ?

    Apple really does not repair your iPod except for battery replacments.They exchange your iPod for a refurbished on of the same model. For a 4G, the price is $99, $149, or $199 depending upon the capacity.
    Apple - Support - iPod - Repair pricing
    A third-party place like the following may be less expensive. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Regarding why, we are only users in this forum.  You are not addressing Apple here.

  • My 3rdG iPod Touch is frozen on the home screen and the volume and time works but the screen doesnt, what do I do?

    My 3rdG iPod Touch is frozen on the home screen and the volume and time works but the screen doesnt, what do I do?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My iphone 4s works, but the screen is completely black... does anybody know how to fix this?

    Hi i woke up three days ago to my iphone 4s not working, assuming it had no charge i plugged it in and fully charged the battery.
    when i returned the screen was still black, but the phone was functioning (ringing and accepting text messages etc)...
    The screen has been blank since and have tried things like restoring and hard resets, but this has not worked. a very very vague image appears when in use but it is almost impossible to see.
    Can anybody suggest a way to maybe fix this issue if it is possible?
    If it is not possible would i be entitled to a replacement or free repairs as I have had the phone less than 1 year and should still qualify for the warranty?
    Any help with this problem would be much appreciated.

    Make an appointment at the genius bar and get the phone replaced. It sounds like the backlight has failed.
    If it's under warranty, there will be no charge so long as the phone isn't physically damaged.

Maybe you are looking for

  • Help with multiple devices and one ID

    I am sure this has been asked before but i apologize as I am new at all this. This is my issue... In April I bought my wife and iPad 2 signed up for an ID and started downloading apps..no problems at all so far. Within a month we had downloaded a bun

  • How to merge two folders together

    hi i have a music folder on my desktop. under my "music folder" i have different genre's eg 'rnb folder' 'house folder' 'dance folder' everytime i download new music i put it into which ever folder is dedicated to that specific genre. to keep things

  • The server clock on a website I use is 5 hours behind. When I use Internet explore, the time is correct.

    The server clock on a website I use to make t-times (FORETEES) is 5 hours behind the current correct time. The time has always been correct until this morning. It is necessary for the server clock on this web site to be the same as my current time. I

  • MediaPlayback component intermittent stuttering

    I'm creating a very simple .mp3 player in Flash 8. When the user selects one of four audio files, I set the contentPath of the component instance to the .mp3's filepath. There's also a button that plays/pauses the .mp3 using the myInstance.play() and

  • Importing SCA Via CMS

    Hi, Quick question regarding importing SCA's into a runtime enviornment via CMS. Lets assume that ACTIVITY-A was checked in, activited, deployed into development, QA, assebled and now waiting for import into production. Before i import ACTIVITY-A int