Screen jitter at transition

I am having an issue with a jitter in my image at transitions. The jitter shows up in the Canvas and on outputted media (not on the production monitor). It is only a few pixels tall at the top of the screen. It occurs on the frame right after the transition ends. At first I thought it was Broadcast Safe filter issue. I have since removed that filter and just used color corrector, but I still have the issue on video that didn't have that filter. The video is 8-bit uncompressed and I am running FCP 5.0.4. Has anyone seen this before? Any help will be greatly appreciated.
Here is an example.
 Dual 2 GHz Power PC G5   Mac OS X (10.4.6)  

I usually see these types of glitched, with that bright green color, when there is something about the clip that FCP or QT doesn't like. I can see that the glicth is actually appearing in the frame after the transition. If you uncheck the filters for the clip, does it make thee glitch go away, or does it appear in both rendered and native media?
You might try switching around your render settings and see if it helps. You may wish to put a test with two clips into a new sequence, otherwise your long sequence will lose all the renders each time you change the settings.
If you can determine that specific clip to tbe cause of the problem, you might try recapturing or exporting that master clip and replacing the clip in your edit.

Similar Messages

  • Imac late 2012 screen jitter/flicker

    Wanted to share a really frustrating screen jitter experience. Started about 2 months ago. Became worse with 10.8.4 upgrade. Spoke to Apple Service in India.
    - Soft reset
    - Pram dump
    - OSX recovery
    Nothing worked. Was going to send the new computer in to the service center when I found this solution. It sounds crazy but it works.
    Repair Permissions and Run Autocad (!!!!!!!)
    http://www.youtube.com/watch?v=NM8RToGZ71A
    Really works. No idea why. Screen jitter has stopped completely.
    Apple one for you to figure out.
    Specs of Imac
    27" Late 2012
    3.4 Ghz Intel Core i7
    16GB
    GTX 6800MX 2048 MB
    thanks,
    Raoul

    You are not addressing Apple on these forums, we are all end-users like yourself. If you have feedback for Apple (I'm not clear if that is what you're trying to do or not) navigate to www.apple.com/feedback.

  • IPhone 4S 64GB screen jitter on iOS 5.1 (1B179)

    I'm using an iPhone 4S 64GB and am experiencing screen jitter on iOS 5.1 (1B179) when typing or scrolling.  My friend's iPhone 4S is also doing the same thing. 
    The screen jitters during text scrolling and selecting.
    Anyone else seeing this?  Perhaps this is an issue with 5.1?
    -Doug

    Battery lasts depending on your usage.
    Talk time: Up to 8 hours on 3G, up to 14 hours on 2G (GSM)
    Standby time: Up to 200 hours
    Internet use: Up to 6 hours on 3G, up to 9 hours on Wi-Fi
    Video playback: Up to 10 hours
    Audio playback: Up to 40 hours
    A liitle bit here & there again

  • My ongoing infernal full screen jitter problem

    Hello all,
    Upgraded to CS6 recently and am still suffering the jitter problem I described here (http://forums.adobe.com/thread/882562) - after multiple tweaks and adjustments I can't seem to resolve it - what's more I've seen the same problem on another machine with different hardware, in both instances the full screen preview is being driven from the video card and not from an external third party device.
    All screens are set to 1080p/50Hz, project is 1080p/25.
    I stumbled on the developers shortcut to display the playback debug info (http://forums.adobe.com/thread/1006498) and what's interesting is that the debug reports *no* dropped frames, full  despite me seeing them on screen.
    And yes, latest Nvidia drivers.
    Would appreciate any suggestions please - I can't use a BM Intensity since my screen won't support 1080p/25 and I'm not a fan of Matrox having been through many painful experiences from Digisuite to Axio.
    Any starting points to diagnose?
    Sacha Goodwin

    Out of interest wanted to see what a 50p project would do - display starts at 50fps for about a second and then drops to 25FPS (i.e. dropping every other frame) and yet debug reports more or less consistent 50FPS - with only occasional dropped frames in the stats now showing up. How/why is this being missed?

  • Jitter Between Transitions

    I just built a slide show with 99 pics in it, all at 4sec each with a cross dissolve in between them. They do not move. But when I burnt the DVD and played it, It has this annoying jitter right before and after the transition on every pic. It doesnt do that if I preview the DVD in Encore. Any help would be great!
    Thanks,
    John G.

    I solved my problem by simply rebuilding to an image file. I did not change ANYTHING within the project. I made sure my system was quiet and built a new image file. Before I did this, I burned the "old" image file to 2 separate DVDs (a DVD-R and a DVD-RW) and both gave the results I documented on Oct 2, so I had to conclude that the image file itself was "bad" and not the DVD player or the way it was burned. This lead me to try rebuilding with no other changes (because I'm stubborn and I wanted to determine WHY it wasn't working) and lo and behold the DVD played perfectly!!

  • Jitter on transitions

    IMovie 5.0. When using the "overlap" transition, I keep getting jitter. I can not tell if the end of the first clip is jittering or the start of the second clip is doing it. Anyone know the cause and cure?
    Ray

    Hi
    free space on THE internal (start-up) hard disk ? >25Gb ?
    Yours Bengt W

  • Lightbox glitch - Quick full screen jitter on closing

    When previewing a lightbox (either in Preview mode or in browser) there's a quick full screen horizontal jitter/shift back and forth upon closing the lightbox. Has anyone experienced this? Is there a solution that can correct this?
    Check it out on my test site:  http://www.scdcreative.com/the-team.html
    Click on any picture for the lightbox pop-up. Pay close attention when you close it.
    Thanks,
    Steve

    Hello,
    This is a known issue with Adobe Muse and our team is working on it to get it fixed.
    It might get fixed in future releases of Adobe Muse.
    Apologies for the inconvenience.
    Regards,
    Sachin

  • Black screen function messing transitions

    SYSTEM PROFILE INFO:
    running Tiger 10.4.4 and Keynote 2 on a 600Mhz dual USB iBook
    PROBLEM: (Began having problems using Keyspan Presentation Remote after upgrading to KN2 and 10.4.4); when using the "black screen" keystroke feature in KN2 (I.e. command-b), the presentation would freeze when I returned to the presentation from the "black screen" mode. Behavior was NOT consistent. Sometimes it would simply be frozen on the last slide; other times it would start the next bullet animation, then suddenly stop the animation and then freeze. In any case, I cannot use the "black screen" feature without freezing my presentation.
    I thought the problem was with the Keyspan Remote. Tried USB Overdrive software to fix; no results.
    Then, I discovered that I have the exact problem using my iBook keyboard! Same problems resuming from "black screen" mode: freezing or partial bulleted text followed by freeze. Obviously, the problem is with either KN2 and my iBook (too slow? too old?) or something else.
    I'd appreciate help as the "black screen" feature is HUGE to my teaching; it allows me to divert my students' gaze AWAY from the screen and back to me for a normal classroom atomosphere. It is one of the key benefits to me over PowerPoint.

    Apparently, I have a serious problem, needs to be repaired by a professional.  This computer has only been used a few times, but have had it since 11/15/2013.  I am very disappointed in this product. Especially, since now it is needed.  I  will not by HP, off to look for a new computer  

  • Screen jitter after long sleep

    Hi Folks -
    I have macbook air (about 2 years old) running Mac OS X 10.8.3.  Lately I'm veen noticing that the LCD screens jitters and jumps when awaking from a long sleep.  If I sleep the computer again, and then wake it up immediately, the problem goes away. 
    Anybody seen anything like that?
    Paul

    Consider a possible third party software issue.
    Consider a visit to the optometrist.

  • Problem with transition : green screen

    Hi
    i'm using iMovie HD 6.0.3. i work with DV
    i have .avi files from my Camera (Canon ixus 850is), i convert my files in .dv with Visual Hub (i know iMovie can do it).
    *But there is the problem :* when i apply a transition effect or a title, the screen is green.
    Watch my screen print :
    Without transition : http://img253.imageshack.us/img253/1706/withouttransitionnz0.png
    With transition: http://img123.imageshack.us/my.php?image=withtransitionbw8.png
    i try to work with files converted with iMovie, same results
    Help please!
    Regards,
    (i'm french, sorry for my english)

    Ok i succeeded!
    I copy my project from my External HDD (Firewire 800) on my Local HDD.
    I closed iMovie HD
    I erase the imovie plist file
    I re-import the clip (.dv format)
    Great success

  • Premiere Elements 11 - transition preview screen

    I have 64 bit Windows 7 computer with a HD7870 video card. I've installed the latest Quicktime update and checked both Adobe & Windows for the latest updates and installed where necessary.
    When attempting to preview a transition from the list of available transitions, when I hit play I am presented with 3 black bars across the the small preview screen, rendering the transition unwatchable.
    Any clues on what might be causing this and how to fix it?

    Bill,
    Glad that you got it sorted out.
    With most commercially built computers, an installation disc is usually created, and then used to set up all shipped computers. At the moment that those discs are created, they are up to date, but as time passes, they get out of date. I have seen new computers set up with drivers, that are 6 - 8 mos. old. With video drivers, that means 6 - 8 driver versions behind.
    When someone mentions a "new computer," it is usually safe to bet that the drivers, and the OS, are out of date, and we recommend that they update the OS, and ALL drivers.
    With video drivers, most general-use programs do not interface with them, all that closely. If the monitor works, then they are good to go. With programs, like Premiere, later versions of Photoshop, 3D programs, and all CAD programs, it is a different story - the video driver is very, very important.
    Thank you for reporting, and good luck,
    Hunt

  • Green screen transitions caused by 99 or more slides

    99 or more slides causes green screen to replace transitions in the later part of the slide show.
    98 or fewer pictures work fine.
    Seems true for all qualities, screen ratios, and whether an iMovie is included.
    Chris Thomerson

    Are you sure that the number of slides is the deciding factor in this? Apple has "resolved" the green screen issue with a workaround. Apparently, having your display turn off automatically after a set period of time is what was responsible for the issue. See the complete details at:
    http://docs.info.apple.com/article.html?artnum=306480
    Gotta love it! My favorite part:
    Although enabling Display Sleep Mode may cause the green screen effect, enabling the screen saver does not.
    Good luck! I haven't tried it myself yet, but will definitely reencode my movie to see if that solves the problem.

  • FCP can't handle effects or transitions without jittering.

    Hey guys, i'm on a FCP7 from Final Cut Studio, I've used this for a good while now, however, just recently, every effect, or transition i place, the video jitters. now i don't know if it will actually export it that way or if it will. My question is, how can i make my fcp not jitter with transitions (as simple as dissolve). Is it possible to uninstall the software without damaging the files?

    I am not a super trouble shooter, but try 2 things - try copying the clips in your timeline and pasting them in a new sequence to see if the problem persists.
    Also, where are your scratch disks - if they are on your boot drive, I would suggest moving them, including your render scratch, to a separate drive, preferably external. You may have a space issue if your scratch disks are on your boot drive (even if you don't have a space issu) it is still a good idea to keep your scratch disks separate from your boot drive).

  • My screen has a yellow tinge and my screen quivers when I'm on the web

    My phone has a yellow tinge and it quivers when Im on the web

    My QUESTION is why does my IPhone 4S have yellow lines, shading on my screen and WHY does my iPhone 4s screen jitter, shakes, vibrate etc. when I am using the Internet, web pages, websites etc.????????????????

  • How to watch my presentation full screen on PC ?

    I have done a presentation in Kenote '05 and I want to watch on PC computer.
    The problem is that my school's computers doesn't have QT Pro so I won't be able to watch it on full screen. I have tried to export it as a PowerPoint presentation but all transitions are lost and slides doesn't look well...
    Do you know other solutions, how to watch (full screen with, all transitions and interactive buttons) presentation on PC, made in Kenote ?!
    Regards,
    Wiktor K.

    Keynote 3 (06) finally allows you to tag a movie to play full screen, but there are other scripts out there that will allow you to change a movie's settings. I haven't tested any in a long while, but I know Tom Negrino used to have one on his web site (which I can't find now).

Maybe you are looking for

  • Nano does not work! Screen frozen, Not recognized by computer nor iTunes

    Hello There I have problems with my iPod, today I turned it on to listen to music, but when I selected the song and pressed play, the screen was frozen, I left so this morning until arriving to the Office. Then I tried access by Windows trying to for

  • Dependant LOV on Search Field

    Hi, I am a newbie using ADF 11g. I am trying to create a Search page which takes 2 parameters. 1st Parameter is the Country LOV 2nd Parameter is the City LOV which is dependant on the 1st Parameter I have done the below steps but no with no positive

  • Is there a fax application in os 10.6

    I thought at one time I had discovered a fax application within my Mac system. Is there fax capability with OS 10.6, or was that something I had with earlier OS versions, on older computers?

  • Problems with CVS and improvements required

    Developing with JDeveloper 9.0.3 preview we have found some bugs and some improvements that would be very useful. Problems 1)     Overlay icons on versioned files dont show the real state of the file as described in the Using Concurrent Versions Syst

  • I cannot make the screen smaller.  It will pop up the normal sizee for a second, and the go large.

    I have an I-Pad version 4?  I cannot make the screen go to the normal size.  Squeezing my fingers together  does not work.  Every now and then the normal size screen will pop up for a second.