Screen Keeps Freezing & Sleep Wake issues

I have a 17" Macbook Pro and the screen keeps freezing. The computer doesnt freeze because when i depress the volume buttons i can still hear the beeps or when i hit F8 music from my itunes starts to play.
Also, 60% of the time when my computer goes to sleep I get a blank screen when i try to wake it. When this happens i have to close the screen for about 2 mins until the computer re-falls asleep. Once this happens I can then wake it up.
any ideas on the causes of these two issues?

Hello
> he told me that the laptop is pretty warm.
Probably this happens due a higher internal temperature
Did your friend already clean the notebook?
There is an interesting article here in forum about cleaning the cooling system of Toshiba notebooks:
[How to clean the cooling system of a Toshiba notebook? |http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]
Check this!!!

Similar Messages

Mac Pro with Dell UP2414Q Sleep Wake Issue

Hi,
I have *two* Dell UP2414Q displays connected to a new Mac Pro, both using Display Port 1.2 (MST) setting in order to get 4K @ 60Hz.
Works fine. Except Google Chrome which is really lame at redrawing all these pixels when you scroll up/down.
The issue is: when the displays go to sleep for a longer period of time (actually it's probably when the Mac Pro itself has gone to sleep) and I wake the system up, the Dells sometimes won't wake up!
And if I start fiddling with the display buttons I will get a half image (left half of the screen). Same problem on each display except sometime it's the first one that doesn't wake up, sometimes it's the second one and sometimes it's both. Unfortunately the situation where they both wake up is extremely rare
Has anyone else had similar troubles?
Note: I have had similar sleep wake issues with just one UP2414Q connected.
I'm running OS X 10.9.4 (of course).
I'm also having a 3rd smaller display connected though a DVI adapter. That one wakes up 100% of the time. I previously had 3 of these and they did always wake up all 3 without issues.
-Francois.

I have this issue with the UP2414Q monitor and my new Mac Pro . . . . . and then some.
I started by losing the right half of the screen on wake up. After about two months of use, my monitor has developed a fault where both sides of the monitor are displayed but at seemingly very different calibrations. The left half is contrasty and the right half seems to be correctly matched to my working profile. This is using the display port connections. HDMI doesn't have this problem but it also won't run at 60Hz, which was an important factor in my choice of this monitor.
At this point I contacted both Apple and Dell. Although I have had quite a few different Apple support staff over a period of a week or so, they did keep good notes, were very patent and seemed to take a genuine interest into trouble shooting it. I cannot say the same for Dell. At first they did ask questions and did the right thing by sending a replacement. It worked fine on display port, then on HDMI but when I connected it back to display port the split screen problem occurred on the brand new replacement one too. After a day of fiddling with connections it went back to displaying correctly with all connections and has not reverted but it does now have the dead right halve on wakeup more frequently than before. I reconnected the original monitor but that has the split screen problem and I can't find a way of getting it to go away. It is unusable.
This incident with the replacement monitor was five days ago. In that time I have tried to contact Dell support by the original e-mail of the technician that initially helped and by phone, through the support number. The email gets the repeated response "Dear Sir/Madam, Thank you for your email. I have left for the day, hence my reply will be delay". It happens in the mooring or the afternoon. A phone call to Dell's support number always starts with a promise to be transferred to the technician dealing with my case and, without fail ends by me being left on hold indefinitely with a terrible one minute audio loop followed by a repeated promise of the next available agent. I once waited over 30 minutes, just to test it. I live in Australia but this was clearly an international call centre. Dell obviously have no intention of dealing with my case. They will have to talk soon though because I still have an extra one of their monitors.
Unless there is a firmware update for this monitor, I would strongly advise against buying one for a Mac, or any Dell product for that matter.

Why does my Ipad screen keep freezing even after rebooting

My ipad screen keeps freezing and remains stuck. So in the last hour this has happened 3 times after hard "reboots". Can someone explain whats going on? Uwas not downloading anything ..only looking at Facebook.

Hello, Nina1711.
Thank you for visiting Apple Support Communities.
Try closing all open applications in multitasking and power cycling the device. Test the responsiveness of the iPad after processing these steps. If the issue persists, check to make sure you have space available on the iPad in Settings/General/About. If there is no space available you may want to remove unwanted Apps or media as this can cause the unit to become unresponsive. If these steps have been processed with the issue persisting, you will need to restore the device. Make sure to backup the device prior to restoring.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Cheers,
Jason H.

My ipod touch screen keeps freezing on the updating logo HELP!

my ipod touch screen keeps freezing on the updating logo HELP!

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Troubleshooting 101
Some topics covered
-Basic troubleshooting steps
-Hard reset instructions
-Manual restore instructions
-Hardware troubleshooting
-Preventive Maintenance
-Anti-theft & recovery tips
-Battery-saving tips
-Repair options
-Contacting Apple
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

My macbook pro screen keeps freezing and i have to re-boot its only a month old

My computer screen keeps freezing and i have to reboot it . The notebook is only a month old .. Someone elsewhere suggested command p and r but i dont understand . Can you help ??

Reset PRAM
Click this link below.
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
Try Reset SMC
http://support.apple.com/kb/HT3964
Your machine is only 1 month old. You are eligible for 90 days of free tech support from Apple.
Your machine is under warranty for 1 year.
It is best to call Apple 1-800-275-2273 and get it fixed.
Best.

HT201412 i pod screen keep freezing up and sometimes turns white. how can i fix?

i pod screen keeps freezing up and sometimes turns white. happens across multiple apps / games. how can i fix?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hi, I hope someone can help.... When I open a new user account, which I want to set parental control on, the screen keeps freezing once the account is open. The wee rainbow circle appears and I can't do anything. Does anyone know how to fix this? Thanks

Hi, I hope someone can help.... When I open a new user account, which I want to set parental control on, the screen keeps freezing once the account is open. The wee rainbow circle appears and I can't do anything. Does anyone know how to fix this? Thanks

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Report any errors it found for Disk Repair, don't need the ones for Permissions Repair.
Try it again & see if anything changed, but have Activity Monitor open & Show All Processes & sorted on CPU%, also have Console open if we can... maybe not when switching, but we'll see.
Does this happen if you just try to create a new admin user???

My iPhone 4s the front screen keeps freezing

I Have had my iPhone 4s for about 3 years, I bought this of eBay, now all of a sudden the screen keeps freezing and I'm not able to phone or text I have to keep switching the phone off then restart it, I can't even slide the screen it's starting to get annoying. If anyone could give me some advice what to do please.
TIna

Hi 61Tina,
There are some troubleshooting steps you may want to try if your iPhone behaves as you mention. See this article -
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Best,
Brett L

Connecting external NEC PA271W via Displayport cable to MBPr has sleep/wake issues

I am experiencing strange sleep/wake issues after connecting my NEC PA271W 27'' external monitor via a mini-displayport to displayport cable to my MBPr.
Waking up from sleep mode, the resolution of my monitor would be set to 1440x768 instead of the proper 2560x1440 and I always have to go to system settings to get it right.
NEC claims this may be due to cable issues and Apple using a "wrong" mini displayport standard but I have tried 4 different cable manufacturers and this is just strange.
Anybody else experiencing similar issues?

I am experiencing strange sleep/wake issues after connecting my NEC PA271W 27'' external monitor via a mini-displayport to displayport cable to my MBPr.
Waking up from sleep mode, the resolution of my monitor would be set to 1440x768 instead of the proper 2560x1440 and I always have to go to system settings to get it right.
NEC claims this may be due to cable issues and Apple using a "wrong" mini displayport standard but I have tried 4 different cable manufacturers and this is just strange.
Anybody else experiencing similar issues?

Constant/Random Sleep/Wake issues

I'm on a new 17 inch MacBook Pro and I've been having problems ever since October with waking issues. Most of the features on the MBP work completely fine until I decide to close the lid and let the mac fall asleep.
One of the random issues I receive is the inability to wake from sleep.
I open the lid hoping the mac will start up as it should, but about 70% of the time the screen stays dark while I still hear the fans and machinery within it work.
I usually have to perform a hard restart by holding down the power button to get a fully functional macbook pro again...
The second issue occurs when I am actually ABLE to wake the Macbook Pro from sleep. The mouse turns horribly unsmooth and jumpy and programs seem to work slower than they normally should.
I experience a few other random problems in addition to these wake issues, but these are basically the main ones.
The only solution I have right now is holding down the power button and performing a full restart, risking closing and deleting all previous programs I was working with...
Can somebody show me a solution to this problem?
Would a clean re-install of Leopard help? I've tried it once before but more and more new problems keep showing up...
Anyways, I hope I can get help on this subject
Thanks

Same issue with my 17". The mouse problem is very annoying. If your screen does not turn on after it has fallen asleep, I push the Screen Brightness up Function key and after about a minute or less the screen makes all the sounds like you pushed the buttons or button all at once and resumes normal functionality. If you have the sluggish mouse, I just insert a wired mouse and it moves fine. As soon as I move my finger over the trackpad the sluggishness continues, but only on the trackpad.
I hope Apple has an Update for this issue soon it happens very frequently. As a matter of fact, right before I typed this message.

MAC Mini late 2014 Sleep Wake issue

I just bought a MAC Mini late 2014 version with Yosemite pre-installed, and got a similar sleep wake problem.
It's connected to an ASUS IPS 27" screen using HDMI interface. When the Mac goes to sleep after 15 min, or when I press the button to force it to sleep.
If you type on the keyboard and the trackpad within 1 minute (before the screen also goes to sleep because of no HDMI signal), then the wake up will work.
If you wait till the screen goes to sleep also, then no matter how hard you pound on the keyboard or on the track pad, the MAC will not wake up.
The only way to wake it up is to power off the screen, then power it on again. Then type on the keyboard or move your track pad while doing that.
This is really annoying. I have to set to "Never" turn the display off to avoid this issue.
Called the Apple tech support who recommended I set up the energy saver like this below. But still could not fix the issue.
He told me to bring the Mac mini back to the shop to check.
I doubt it's a hardware issue. My theory is that this could be a software bug that somehow
the setting of "Prevent computer from sleeping automatically when the display is off" is not in effect even if you turned it on in the power saver preference.
So, when the computer goes to sleep, there is no more HDMI signal, then the screen also goes to sleep.
And if "Prevent computer from sleeping automatically when the display is off" is not in effect, then even if you type on the keyboard, the computer will not wake up as the screen is asleep. The screen will not wake up as no HDMI signal comes from the computer.
This turns into a viscious cycle, or a deadlock. Nobody is waking up.
This is simple logic. I don't know why systems are designed to work like that. Just too annoying....
I hope apple can fix this software bug asap.
I did try to convert my HDMI cable to min-display port and try to plug that into the thunderbolt port to see if it helps.
The same issue appears. The only difference is, with the HDMI port, once I am able to wake up the computer by power cycling my screen, i will see that I am prompted with a login screen, even if I set up my computer to auto login.
but when I use the display port, when I managed to wake up the MAC, it bypasses the login screen.

Some updates on this. I tried two other 22" screen. Both of the seems to be working fine with sleep wake, but takes between 40 sec to one min to wake up after you typed something.
Topcon hdmi 22" screen
17 sec after keystrokes to turn wake screen
40 sec to wake computer
AOC hdmi 22" screen
19 sec after keystrokes to turn wake screen
38 sec to wake computer
I tried to switch to two other HDMI cables to see if it'll improve the situation of my original ASUS VX279 IPS HDMI screen.
But it didn't. Still never wakes up after it the MAC goes to sleep until you power cycle the screen.
I guess there is some hardware compatibility issue here.
Let me bring my mac mini to the shop to see if a replacement will help.

Hi my Ipad screen keeps freezing

Question hi my iPad keeps freezing can anyone help me please thank you

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

IPad 2 screen keeps freezing

My iPad 2 continues to lock up. I turn it off by holding the home and hold buttons, let it rest for a couple of hours and then it does it again. The screen freezes and does not respond to anything. It is so frustrating, I have set it up as a new iPad and installed all the updates, any other ideas?

(A) Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.
(B) Close all apps in the multi-task window
1.Double-click the Home button.
2. Swipe the app's preview up to close it.
3. Preview will fly off the screen.

My screen keeps freezing , any suggestions

my screec keeps freezing , any suggestions .

Have you tried the following:
- Reset the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod via iTunes on your computer. First from backup and if the problem persists restore to factory defaults/new iPod.

Sleep/wake Issues With Late 2013 Macbook Pro Retina 13"

Dear Apple Community,
I have been recently having issues with the sleep/wake cycle of my laptop. Every time my laptop goes to sleep and I try to wake it up it gets stuck on a blank screen for 3 mins before returning to normal functionality. I have tried deleting the sleep image files and the laptop functions fine for a day and then back to the same issues. I have 3 sleep image files, 2 of them are 1.07gb each and the other one is 64mg. I have deleted them many times and they just come back with the same issues. Any help here would be appreciated. Thank You

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Screen Keeps Freezing & Sleep Wake issues

Similar Messages

Maybe you are looking for