Screen layout changes document flow

Hi Experts,
I came across one specific need of customer where as he wants to supress 'service document'  tab field on document flow screen,
I am not sure if that is at all possible and will appreciate your views and solution in detail.
Thanks in advance.
Paresh

thanx kishor for your prompt reply,
this problem came from ABAPer to me suggesting tht there is some radio button to be unchecked ...........i am not sure though, but if you can please put some more focus just in case.
Thanx again.
Message was edited by:
        Paresh Kolte

Similar Messages

  • Screen Layout at Document Level: for Purchse order

    Dear Sap MM Experts!
    I have a requirement such that the purchase requisition when edited the TEXT feilds should be in display mode.
    The users should not be able to change the text in Purchase requisition.
    How do the same with screen layout for the particular transaction :ME52N
    Regards,
    A S

    Hello,
    Go to Spro < Materials Mangement < Purchasing < purchase Requisation < define screen layout at document level < me52 change purchase requisation
    In that make entry of text as diplay only  ( table T162 ),
    I hope this ll sort the problem , pls comment.
    Regards,
    Abhijit

  • Define screen layout at document level

    Hi all,
    It's possible to define a screen layout at document level for custom fields of PO?
    In others word, in customing i can define the status of PO (headers and items) fields, can I do the same for custom fields?
    thanks in advantage,
    enzo
    PS. I'm using ECC 6.0

    Hi Dear,
    It can be define if you want to work on it so please tell which field you want to customize then  i will guide you.
    Regards,
    Virendra

  • What is T code of Screen Layout at Document Level (PO)

    what is T code of Screen Layout at Document Level (PO)

    Hi,
    yaa, the option is only menu path.
    Some tcodes removed , plz follow the menupath.
    Regards,
    Andra

  • Screen layout changes for PO

    Hi expert
    In the document type i have  change the screen layout to MBF from copying NBF, but i am not getting   effect of changes which i had made for MBF..
    Regard
    Nabil

    HI,
    There are up to six different field selection keys.
    Eg: 1. Field selection key: transaction
          2. Field selection key: activity type
          3. Field selection key: purchasing document type
          4. Field selection key: item category/document category
    The successive combination of the field selection keys listed above decides which input characteristics the fields have in the document.So not only MBF, it is the combination of the setting that determines the field layout.
    + For mandatory fields
    . For optional fields
    For display fields
    - For suppressed fields
    the strongest is suppresed, then display, then mandatory and last is optional.
    ie , for eg combine fld sel key 1=  suppressed and fld sel key 2 = mandatory, result is field is suppressed. Similarly , ther final result after combining the settings determine the field status.
    Regards
    Aloysius

  • Screen layout changes-MIGO

    We want to make some changes in screen layout for goods receipt for purchase order as well as outbound delivery using MIGO transaction.
    we want to keep material code just beside the material description.
    Plz suggest the process flow and transaction code.

    http://www.sap-img.com/shop/sap-mm-inventory-management-and-physical-inventory-configurations.htm
    check this out may be helpful...

  • Migo Screen Layout Change

    Hi Experts,
    I want to Hide Amount in LC Field (Screen field- GOITEM-DMBTR, ) in Display of MIGO. How can I do this in spro. Kindly suggest.
    Thanks in Advance
    Ishu

    Dear,
    You can use T.code OMJX
    And try this links,
      [How  to change screen layout of MIRO and MIGO transactions ?;
      [MIGO layout change;
      [MIGO Screen layout for 541 movement;
    Regards,
    Sandip

  • Screen layout changeing according to overview icon

    Hi all.
    I have one question.
    When I use 'pa30', I can see a couple of provided icons.
    When I choose overview icon among them, Screen is displeyed.
    I'd like to change layout of this screen.
    How am I doing for that?
    Probably, Is it possible by setting 'IMG'?
    For example> I choose PA30, and register personnel number.
    And I choose infotype '0021' and press a 'overview icon'.
    And then, screen is displayed as follows.
    Type,Name,No,Last Name,First Name, Registration NO, etc
    I'd like to add stuff like begda and endda.
    I want to represent screen layout as follows.
    begda, endda,Type,Name,No,Last Name,First Name, Registration NO, etc
    Edited by: John Kim on Feb 5, 2009 3:28 AM

    I solved this problem to your kind assistance.
    Thank you.
    Edited by: John Kim on Feb 6, 2009 2:16 AM

  • Sub screen: Layout changed after applying the Patches

    Hi,
    I created a sub screen and used the same in a standard screen. The issue is that when I compare the screens i.e. the layout of the sub screen and where it is actually used(standard screen), they differ.
    The sub screen was being displayed properly before the Patches were applied.
    Does applying the Patches has anything to do with this? If so, how to resolve this?
    Regards
    s@k

    ennahk wrote:
    Thanks Hussein for the quick reply...
    Here are the list of patches applied in that order 1) 7427746 2) 8349148 3) 12992649All those patches are related to Assets module and should not have any impact on the concurrent requests in general (from the README files and the MOS docs).
    If no other changes have been done recently, then I would suggest you log a SR.
    Thanks,
    Hussein

  • ME52N - Define Screen Layout at Document Level

    Hello,
    I produced an order requisition from SRM. (Document Type EC / Field Sel.Key NBB) Unfortunately I cannot change the category of commodities during this order requisition over the transaction ME52N. This must be however possible. The appropriate Field Sel.Key NBB is correctly adjusted.
    During a other order requisition it functions. (Document Type NB / Field Sel.Key NBB - not SRM order requirement)
    Where still in the field control one intervenes?
    Regards
    J.V.

    What do I have to examine?  The adjusted types and key are all of SAP.
    The problem apparently lies in SRM. With normal SRM orders in the R/3 an order is put on. The category of commodities may not be changed then no more.
    With SRM orders with text positions a order requisition is to be put on in the R/3. Functions also. The category of commodities is not also here alterable only unfortunately. That must function however.
    My question: How can one change the data of the order requisition with text orders over SRM?
    Regards
    J.V.
    Edited by: Jana VOGL on Aug 24, 2009 3:39 PM

  • PRT screen layout change in Work Order

    Hi  Experts ,
    when we assogn PRT to an Operation in Maintenance order then PRT description by default comes in righ hand corner of the screen . I want to shift that column to near to PRT number .
    Can any one please help
    Thanks

    Hi ,
    Thanks for the reply . but I donot want this change for my account only , I want it for all users .
    In the change settings screen there is one tab for administration settings where we have given numbering for each field but that is deactiveted .
    Can you please tell how to activate that
    Kind Regards,
    Payal

  • PO Screen Layout change, Addition of one column in Item Overview screen!

    Hi All,
    I have one typical requirement where in user wants to add one column in the Item overview screen, example "Reason for ordering" which is there in Item Detail under Retail Tab!
    Can anyone suggest, How can i get this done? and also i want to know if  there is any possibility to add this field at header level??
    please let me know if i'm not clear in describing the issue...
    Suggestion and solutions would be rewarded & appreciated,
    Thanks in Advance..
    Regards,
    Siddaram

    hi,
    Check sap note 458591..
    Regards
    Priyanka.P

  • Change in Screen Layout of PO for a particular Item category

    Hi,
    We are facing a typical issue after Upgrade of our system from 4.6C to ECC 6.0.
    Whenever we try to create a PO (in the newly upgraded system) with the Item category S (Third Party PO), the material number field goes blank and it becomes Non-Editable (even before saving the PO)...
    However, on saving, EKPO table has the entries for the material number specified before entering the Item Category S. If we try to display the PO, it shows blank in the MATNR field.
    This works fine with other item categories......we see this problem only with the item category S.
    All the configurations (Screen Layout for Document Type, External Representation of Item category) are fine....but still we are facing this problem....
    Any suggestions on this?
    Thanks and Regards,
    Gaurishankar

    Hi Ninad,
    I think I have mentioned it very clearly that it works for other item categories assigned to the same document type. It is a very basic setting that one has to check for issues related to PO screen layouts and I have done all those checks.
    As stated earlier, this issue has come up after Upgrade, so just want to know if there is any known SAP Note or solution to this problem (if someone has faced it earlier).
    However, thanks for your reply...
    Regards,
    Gaurishankar

  • Screen Layout of Sales Orders

    Hello All,
    Is it possible to define screen layout of sales orders VA01/VA02? The requirement is to disallow changes in the unit of measure field when creating or changing an SO.
    In IMG > MM > Purchasing > theres Define screen layout at document level. Is there a similar functionality in SD?
    Suggestions for possible work arounds are welcome also.
    Thanks!

    Hello All,
    Thanks for your input.
    SHD0: Should this creation of a transaction variant a BASIS Security task?
    VOV8: Do i place the variant in Transaction Flow > Variant Field?

  • Transaction ME21N Screen layout Item Details TAB settings

    Hi,
    ME21N transaction some of item details TABS are invicible. Like "Delivery address tab" is invicible. I want to make it visible/changeble to enter address for ship to.
    Right now I am looking into SPRO on screen layout settings and transaction SHD0 for screen layout variant.
    But I could not able to activate/visible of this particular tab.
    Help needed to make "Item detail delivery address tab" visible/change.
    Thanks,
    Deepak.
    Edited by: KDeepak on Apr 12, 2010 2:29 PM

    Hi Deepak,
    The path is SPRO -- Materials Management- PurchasingPurchase order- Define screen layout at Document level-field selection -ME21N-Reference item data
    In field selection screen for ME21N i.e.maintain table T162 -Field selection groups .Under this on the tab of Reference data ,item you have to mainatin as an optional entry for Delivery Address.With this delivery address tab will be visible for you under ME21N trancsction.
    Regards,
    Nitin Amritkar

Maybe you are looking for