Screen layout for shipment document

Hi,
Can anyone suggest how to look at the screen layout of the shipment document.
Thanks and regards
Joseph

HI Joseph,
You can obtain the screen number and program by clicking menu 'System' -> 'Status'. Then copy the program and screen number from there, see it in SE51. Alternatively in the Status screen, double click on the screen number will also lead you to screen painter for layout settings.

Similar Messages

  • Screen Layout for Purchase Orders

    Hello,
    Using the screen layout settings in config, I want to set a particular field to display only in change mode in ME22N.
    But enjoy PO's are all controlled by entry ME21N only in config, So this means if I set AKTV (change) to display in ME21N transaction the field is display also, something I don't want to happen.
    Using ME22 etc it is no issue.
    Any thoughts on how to set change mode for enjoy PO's?
    Thanks.

    screen layout for purchase orders are done for document type wise.
    go to document type and check the field selecton. now you can change field selection for that document type
    spro > mm > purchasing > purchase order > define screen layout for document type.
    find the fileld selection key at  purchase order > difine document type

  • Screen layout of sales document

    hi all.,
    Is it possible to make Screen layout of sales document (Particular field as required,optional & display)
    Regards.,
    Lakshmanan

    <b>Yes u can make either with the use of user exits or SHD0 , For more details make a search in sdn posts , there are soultions on this</b>

  • What is maintanence level in  screen layout for asset master record

    hi everyboby,
    can anyone explian this
    when I'm defining screen layout for asset master record to  make business area as required entry it was throwing msg like select maintanance level. what could be the reason?can anyone help me on this.
    thanks
    siri

    hi..
    thanks for reply again.
    If i select  business area as optional (main no,sub no)and supress for all fileds (only selected main no) ,I'm able to save screen layout.If i set BA as required select mainno,sub no check box and save it shows the same  error msg.Anyway  i can create asset master now.thanks
    regards
    siri

  • IDOC structure for shipment document

    Dear All,
      I need to know the IDOC structure to use for shipment document which will be updated with the actual shipment start end end times.(for carrier stop confirmation update interface.)
    Please let me knnow.
    Thanks in Advance.
    KCR

    Hi KCR,
    Check the Message Type SHPMNT for IDOC types SHPMNT01,02,03,04,05.
    Thanks & Regards,
    YJR.

  • Screen layout for FSV

    Hi,
    How to create the screen layout for the financial statement version? What is the T-code?
    Thanks
    Sridevi

    I don't think you can have a screen layout for FSV. FSV in short is the represenattion of GL accounts in a Hirarchial way.
    When you have created your FSV in OB58, this FSV is available in all the standrd todes that are using FSV as a base and the screen layout that the Tcpde provides is avaialable in the same Tcode.
    For Example if you are using F.01 after executing the report, you have the chnage layout option which you can use.
    Hope you understood.
    Reward points if useful.
    sarma

  • Screen Layout for Leasing Tab_leasing groups

    Hello Gurus,
    In the screen layout of the leasing tab, I have Leasing Data 1, 2 , leasing long text and capital lease method. How and from where can I change the fields that are included in the groups leasing data 1 & 2. Can I maintain the screen layout for leasing tab as per fields wise instead of field group wise.
    Thanks in Advance

    hello
    Thanks for the reply, from the path suggested I am not able to reach to the point where i can separate / change the fields in the groups leasing data 1 / 2. Can you please tell me exactly where to go and what to do for making the fields active / inactive instead of the making the whole group of fields active / inactive.
    Thanks in Advance

  • Screen layout for FBE1 truncation

    Hiiiiiii
    Dear expert i need to add some extra fields in FBEI  anyone can help you to find screen layout for FBE1 truncation
    Best regards
      Ajeesh.s

    DEAR
    Actually i want to suppress two fields in FBE1 for that i need screen layout.i don't know the relationship in between FBE1 & FORM PAINTER
    please help me out this issue
    Ajeesh.s

  • Screen layout for deliveries

    Hi
    Can you folks suggest me the path to changing the screen layout for the inbound delivery.
    cheers
    Joseph

    hi Joseph,
    An option for you to customize screen layout is using Screen Painter transaction SE51.

  • Screen layout for Excise.

    hai all MM gurus,
    can anybody throw the lights on screen layout for Excise transaction codes for MM?.

    No answer.

  • Screen layout for Customer group

    Is there any way we can define a screen layout for a particular customer group(having particular fields mandatory and remaining optional).
    Any help will be appreciated.
    Thanks,
    ALAM.

    It is through the transaction code OBD2
    The path is
    SPRO-FINANCIAL ACCOUNTING-ACCOUNTS RECEIVABLE AND ACCOUNTS PAYABLE-CUSTOMER ACCOUNTS-MASTERDATA-PREPARATIONS FOR CREATING MASTERDATA-DEFINE ACCOUNT GROUPS WITH SCREEN LAYOUT
    Hope this helps.
    Pls reward if this helps.

  • Screen layout for the asset class

    Hi,
    I know the name of the screen layout used for a particular asset class, now in that screen layout I want to see which fields are mandatory and which are not. Where can I see that?
    Please help .
    Many Thanks

    Hi,
    If you want to see the fields in screen layout go to spro - Asset accounting - Master data - screen layout - Define Screen Layout for Asset Master Data - click on Define Screen Layout for Asset Master Data
    there you will find the fields which are mandatory / optional
    Kedar

  • I want to create a new customized screen layout for responsive HTML5  output. I don't want to use the ones present in the gallery. What are the steps to do so?

    I don't wish to use the ones already present in the gallery. They do not meet my requirements. Therefore, I want to create/design my own screen layout for the responsive HTML5 output. Please let me know the steps to do so. How to create a SLZ file, what is the code that I need to write. What are the components that I need to create to have a complete screen layout to be used in a responsive HTML5 output.

    That would require inline formatting and I doubt that is an option.
    If I am following you, the header area is full width of the screen so I cannot see how it can be broader, Perhaps you mean deeper? A screenshot might help here. The change would be made in the layout.css file.
    That would be a change in the layout.css.
    I suspect that too is controlled by the layout.css.
    To make the changes you would have to go into the layout.css and modify that. As you will see, it is a very complex CSS and that is why I said creating you own layout is not easy. Hopefully when Willam is available again, he may be able to give you some more specific information.
    I think Willam will confirm that if you cannot read the existing CSS to make those changes, then creating your own skin would be beyond your capabilities. Please do not take any offence there, I am simply emphasising how complex a task it is to create a skin from scratch. It's not one I would take on.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Screen Layout for Asset Master Data

    Hi all,
    we are using SAP ECC 6.0 with a base component 700 Level 15 and the Logistics and Accounting component 600 Level 12.
    I hope you can help me with the following tasks. It should be said that I am not an expert FI-AA, so you must bear with me.
    It is desired, that the Screen Layout for asset master data, should have an additional field "customer order" as a required field.
    So I go to the Customizing
    --> Financial Accounting --> Asset Accounting > Master Data> Screen Layout--> Define Screen Layout for Asset Master Data --> Define Screen Layout for Asset Master Data
    --> and then into the third level of navigation in the u201Cfield group rulesu201D (rule for R & D development costs and then logical field group time-dependent data)
    So there I should be deposited the "customer order" as a required field.
    But:
    1. The "customer order" is not available in any field group. How is it possible that I add the u201Ccustomer orderu201D to a field group?
    2.  I am not able to add any field, in the above transaction?
    I am very grateful for any help.
    greetings

    Dear all,
    I want to come back to my problem listed above.
    In the APC Values Posting  (Transaction ASKP) the costs have been assigned to a WBS element. Now, it should not be assigned to a WBS element, but to a customer order.
    For that I created in the asset master a new customer's own field "Customer Order".
    For this I have implemented the customer enhancement AIST0002 (Customer fields in asset master).
    The new field "Customer Order" is now available in the asset master as desired.
    So far so good.
    Now, the new field "Customer Order" must be specified and activate as an Account Assignment Object.
    Is this possible and how can I add my new field to an Account Assignment Object?
    Thanks in advance for any help.
    greetings
    Martin Buthmann

  • Screen layout for pr and PO in respect to Material master

    Dear Experts,
    I know that we can control the screen layout display, optional... with respect to document type...
    But there is one requirement... When there is BATCH activated for the material... in Material master( batch avl) the "batch" field in PR.....Item details >Material Data needs to be optional field.. (possible to enter value)..
    When material is not not acivated for batch.. then that field to be Display only(Not possible to enter value)
    pls guide me is this possible.. ?

    Hi,
    This can be done with both customizing and specific developpement.
    In SPRO: Materials Management/Purchasing/Purchase Order/Define Screen Layout at Document Level, you can define new fieldselection key (allways define new one as copy of standard in order to copy the document type).
    Then you can define your own strategy to assign fieldselection key to a purchase order item in BADI ME_PROCESS_REQ_CUST method FIELDSELECTION_ITEM_REFKEYS according to the item data
    This user exit allows you to had new fieldselection keys.
    - CH_KEY0 is used for the transaction (in ME51N the fieldselection key is ME51N)
    - CH_KEY1 is used for the activity (in creation mode the fieldselection key is AKTH)
    - CH_KEY2 is used for the document type (defined in customizing for each document type)
    - CH_KEY3 is used for the line type (if the item type is standard the fieldselection key is PT0B)
    - CH_KEY4, CH_KEY5 and CH_KEY6 are free to use
    Keep in mind that the system take the union of all fieldselection key. If a field is changeable in fieldselection ME52N and PT0B but not in AKTH then it will not be changeable.
    Hope it helps
    Regards

Maybe you are looking for

  • Regarding: OLAP Reporting tools

    hi all Is there any OLAP Reporting tool avaiable in Oracle. Please provide me the more information regarding it. Thank you s

  • GetURL PARENT

    I am using AS2 in Flash CS3. I am trying to simply us the getURL to open a url in the same window. Does not work, it will work if I use the "_blank" statement but I need it to open in the same window. I have tried saving it as FP8 and 9 with no resol

  • Delivery notification

    Hi, in the "imsimta qm top" output: Count Subject ====== ======= 9 Delivery Status Notification (Failure) 7 Delivery Notification: Delivery has failed What is the difference between the two subjects ? Regards

  • Payment Terms(Different at header and Item)

    Hi, While creating an order with two line items having different materials, A different payment term is picking for one material at item level which is different from header. Where as for other material same payment term is coming at both header and

  • EQ settings not working (and volume issue?)

    Hey everyone, I know that on my old video Ipod, I could listen to music while changing the EQ, and you could always tell a different in the settings. Acoustic sounded much difference than Latin, which sounded different than Rock, and so on. And to re