Screen layout of requisition

Hi Experts,
A have a request about the screen layout of a requisition.
The Plant in transaction ME51N has to be mandatory even if the item is a service.
I flagged the mandatory field in customizing in all the involved field selection keys, but nothing changed.
Could I check other settings in customizing?
Thanks very much

I set the mandatory flag for the document type, PT1B and PT9B. But it doesn't work.
The situation changes if I choose in the requisition item the account category different from unassigned (U).
I checked in the account determination category but there isn't the possibility to manage the field Plant.
Thanks

Similar Messages

Screen layout Purchase Requisition

Dear all gurus,
I want to ask a question about Screen Layout PR in Purchase Requisition -> Define Screen Layout at Document Level. In "Field Selection" Quantity and Price for Price and price unit. I had filed Opt Entry in that field. But when i create PR it always mandatory to entry the price in PR. How to solve it?
Thx
Icuk Hertanto

hi
As u r saying, setting at my place is same as yours..but at my place..system is not asking for price...though it is asking for quantity,...that too...we have marked the quantity as optional entry..
so please check ur setting once again...because while we create PR..material valuation price comes from the material master.
try this out
Thanks

Screen Layout at Document Level: for Purchse order

Dear Sap MM Experts!
I have a requirement such that the purchase requisition when edited the TEXT feilds should be in display mode.
The users should not be able to change the text in Purchase requisition.
How do the same with screen layout for the particular transaction :ME52N
Regards,
A S

Hello,
Go to Spro < Materials Mangement < Purchasing < purchase Requisation < define screen layout at document level < me52 change purchase requisation
In that make entry of text as diplay only ( table T162 ),
I hope this ll sort the problem , pls comment.
Regards,
Abhijit

How do I get a Up One Level in the Topics page of my screen layout?

I am trying to insert an "Up One Screen" on my Topic page in my screen layouts and it's only allowing me to add a hyperlink to the Table of Contents. Any suggestions?

What do you mean by Up One Screen? Where is Rh only allowing you to add a hyperlink to the TOC?
What sort of help are you generating?
What version of Rh are you using?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Error of Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment

HI
My previous asset error was cleared by assigning non-tax While using the option of Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment the following error is coming ..... Steps are attached (File and URL)
http://rapidshare.com/files/135200425/asset_error.doc.html
pls help me ....
Thanks & Regards,
Kalai

Hi,
There are 2 set-up parts:
General setting that is working for all depreciation area's
Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
When you have only 1 area it don't have sense to create Chart-of-Dep.-Dependent Screen Layout/Acct Assignment.
For me 20 Chart-of-Dep are using the standard one and for 1 is using his own Chart-of-Dep.-Dependent Screen Layout/Acct Assignment
This is the reason for the errors

Error While defining screen layout in asset account

Hi Guru's,
I tried to define screen layout rules in asset accounting but it showing error "screen layout control"410"does not exist.can any body tell me whats wrong?
Thanks

Refer SAP note 1035757 or 489268

PO Screen Layout - Goods Receipt Indicator

Hi Guru,
I need help in opening up the Goods Receipt indicator in PO for editing. Can someone guide me on which field in the GR/IR control selection group should I be changing in customizing in order to open up this field?
If there are other configuration involved, please let me know too. Thanks.
Regards,
new@SAP

Hi
the field GR in the PO item is controlled by the usage of material being used, Account assignment category.
In case of material which is Quantified & Valuated in the Plant, you cannot remove the GR & IR flag.
In case of account assigned PO's this indicator is changeable.
Using screen layouts you cannot control them.
Thanks & Regards
Kishore

Screen Layout Field in the Asset Master Record

What is the use of the screen in the asset master record, ANLA-FELEI?
We have some assets where there are different values between this screen layout and the screen layout defined at the asset class (i.e. through configuration).
It seems the one defined within the asset class takes precedence.

HI
Scree Layout controls the diplay of fields, it may not be necessary for a user to use all the fileds provided by SAP. Hence the options like Required, Optional and Suppress are used to control the screen diplay and the TABs to be displayed based on the need.
Asses within the same class will have same fields since the screen layout are assigned to an Asset class.
Scree layout for the Tab Depreciation Area can also be controlled with the screen layout defied for the Depreciation Area. With this one can have different screen layouts per dep. area.
Hope i'm clear to you.
Thanks,
Vijay

Group Asset Screen Layout disabled fields

Hi All,
We have created asset masters with Book and Tax depreciation, For tax depreciation we are assigning Group asset. Issue is while doing take over value with t- Code AS92, system should propose the field of APC Value and Accumulated Depreciation Value but both the fields are proposing only for Book Depreciation
In case of tax depreciation APC value is editable and Accumulated Dep value is disabled, requirement is we need to enter both the values for tax dep along with group asset assignment.
This is happening only when we are assigning group asset while creation of asset master. if you donu2019t assign group asset to the asset master then system is allowing us to enter both values in both the depreciation area.
I have checked necessary configuration regarding screen layout and not found any solution.
Kindly help in this regard.
Regards,
Sahil K

Hi:
Please check for missing authorization if any in Transaction code ANSICHT. Have you checked group layout in AOLA..
Regards

How to make use of the 'Groups' in Screen Layout?

Hi All,
I have a screen with 10 input fields (F1, F2, .. F10).
I set the 'Groups' attribute in the screen layout to 'DIS'.
How could I make use of this 'Groups' attribute so that when I loop the screen, I will only disable fields with the 'Groups' attribute set to 'DIS'? Thanks
I tried the following codes, but it's not working:
LOOP AT SCREEN.
    IF SCREEN-GROUPS IS NOT 'DIS'.
      SCREEN-INPUT = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
It says ==> The data object 'SCREEN' does not have a component called 'GROUPS'.

In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
The first text box under Groups attribute corresponds to SCREEN-GROUP1,
2nd text box for SCREEN-GROUP2
3rd text box for SCREEN-GROUP3
4th text box for SCREEN-GROUP4
Hope this helps.
Thanks,
Balaji

Screen layout for Special G/L indicator

Hi everyone!
I would like to know if you create a new special g/l indicator, you can change the screen layout that the system gives you. I need to create some which can have a screen layout similar to the one used in 01 key account.
Thanks in advanced,
Olga

Hi Santosh,
I´m going to give you some examples about what I want to do. First, I would like to used the special G/L indicator H security deposit which is configurated like as others special G/L transaction types. When I post with this Special G/L indicator the system shows me some fields in the accounting screen layout such as "Due on", "Invoice reference", "Assignment", etc. I would like to change this screen layout because I need fields like "Payment terms", "Payment block indicator", etc. What I did was to change field group status of the reconcilation account that this special G/L indicator has, and key accounting configuration that this special G/L indicator uses. It doesn't work because I make these fields optional and the system didn´t show me those.
Other I need to do It's make new special G/L indicators because I need to post with a different reconciliation account and I need to configurated the screen layout with fields such us Payment terms, Payment blick indicator, etc. I mean I need to create my own screen layout.
I don´t know if this gives you more details about what I want to do.
Thanks so much.
Best regards, Olga

Change in Screen Layout of PO for a particular Item category

Hi,
We are facing a typical issue after Upgrade of our system from 4.6C to ECC 6.0.
Whenever we try to create a PO (in the newly upgraded system) with the Item category S (Third Party PO), the material number field goes blank and it becomes Non-Editable (even before saving the PO)...
However, on saving, EKPO table has the entries for the material number specified before entering the Item Category S. If we try to display the PO, it shows blank in the MATNR field.
This works fine with other item categories......we see this problem only with the item category S.
All the configurations (Screen Layout for Document Type, External Representation of Item category) are fine....but still we are facing this problem....
Any suggestions on this?
Thanks and Regards,
Gaurishankar

Hi Ninad,
I think I have mentioned it very clearly that it works for other item categories assigned to the same document type. It is a very basic setting that one has to check for issues related to PO screen layouts and I have done all those checks.
As stated earlier, this issue has come up after Upgrade, so just want to know if there is any known SAP Note or solution to this problem (if someone has faced it earlier).
However, thanks for your reply...
Regards,
Gaurishankar

Need help with Responsive HTML5 screen layout in RoboHelp HTML 11

I have a few questions/issues regarding screen layouts for Responsive HTML5 output in RoboHelp HTML 11.
First off, I decided to just use the Theme1_Standard layout that came with the program (only other default option was Theme2_Government) and started customizing the layout. I originally added a company logo to the 'Header' component in the Customization dialog, but have since decided to remove it. I can't seem to do this from the dialog, so I tried just deleting the image file from the whole project. The file is gone, but the logo is still there. This is only displayed in the header when a topic is displayed, it does not appear in the header at the TOC, Index, Search screen, etc. How do I get rid of this???
Secondly, the text in the header for the topic screens appears differently than the one on the screens for the TOC, Index, Search, etc. In the former of these, the header is displayed in maroon text in a much smaller font, similar to that used in the topics. In the latter, the topic is displayed based on what I configured in the Layout Customization dialog; much larger in white text on a black background. In each case the heading text serves as a link to the default display topic shown when the help file is launched, which is fine. However, how do I get the header to be consistent across all screens (topics and TOC, Index, etc. alike)???
As a result of these issues with the Theme1_Standard layout, I'm trying to import a different Responsive HTML5 screen layout than the two provided within RoboHelp HTML 11 (Standard and Government). I did some digging in the program help and found another layout I'd like to use (Theme3_Black.zip) at RoboHelp screen profiles and layouts. I tried importing the new layout, but it's looking for a .SLZ file and the only one in the files that came with the ZIP file is SLZConfig.xml, and I don't think that's what I need, though quite honestly, I don't know.
I extracted the contents of the ZIP folder to a folder in the !ScreenLayout! folder within the RoboHelp project, but when I open the project, I don't see Theme3_Black as an option. I need to figure out how to import this screen layout because the color scheme matches the one used in the program for which I am writing the help. How do I import and apply this other screen layout???
Any tips, tricks, or guidance on any or all of these items would be GREATLY appreciated.
Thanks much in advance,
Dave

Item two of the original post is also something I am having issues with:
"Secondly, the text in the header for the topic screens appears differently than the one on the screens for the TOC, Index, Search, etc. In the former of these, the header is displayed in maroon text in a much smaller font, similar to that used in the topics. In the latter, the topic is displayed based on what I configured in the Layout Customization dialog; much larger in white text on a black background. In each case the heading text serves as a link to the default display topic shown when the help file is launched, which is fine. However, how do I get the header to be consistent across all screens (topics and TOC, Index, etc. alike)???"
We have the text toggle between red, white and blue depending upon the topic selected. In the customize Selected Layout we have the title color set to white. It seems to think that it is a link and I would like to know how I can force the text to be white and to stay that way no matter which topic is selected.

Can we change the look and feel of the screen layout

Dear All,
I am new to ABAP WebDynpro, and would like to know the following with respect to ABAP WebDynpro :
1. To what extent can we change the look and feel of the screen layout ?
2. Is it possible to change the background color of the layout?
3. Is it possible to change the color of, Buttons etc ?
Any information / document/ link to explain this would be very helpful ..
Thanks in advance,
Aditi

Hi,
Psl check out these links.
check out these webdynpro standard components in SE80 tcode -
WDR_TEST_UI_ELEMENTS
check out this link on webdynpro for ABAP-
http://help.sap.com/saphelp_nw70/helpdata/EN/03/0048413e466e24e10000000a155106/frameset.htm-WD for ABAP
http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm -UI elements
http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm-Button Properties
http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm- For different Layouts
Regards
Lekha

How to create new field groups in AA master data screen layout?

Hello,
We are using ECC 6.0
We have created bunch of new fields for asset master data, but we want to make them visible only for particular asset class. So we need to customize in SPRO Asset Master Data Screen Layout, but there no specific field groups that we can customize. So how to create and add new field groups to manage them by radiobuttons Required, Optional, No or Display?

hi,
think, it's not possible.
look here:
http://help.sap.com/saphelp_47x200/helpdata/en/4f/71e05a448011d189f00000e81ddfac/frameset.htm
"The field groups and their respective fields are defined in system tables"
kind regards
Andreas

Screen layout of requisition

Similar Messages

Maybe you are looking for