Screen light fades and darkens

All in one screen darkens in lower right side 15 minutes after turn on

Help us to help you by posting the following information.
1.  The complete Model Name. or Product Number. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.
Connect it to an external display to troubleshoot the issue. If the external display  can be viewed  with normal brightness, then there is an issue with the All-In-One PC's display.
Is it still in warranty?
Check your warranty status Here.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • When i open my macbook pro- the screen lights up and then goes black-

    When I open my Macbook pro- the screen lights up and then goes black- keybook stays backlite- can not get screen to come back on. Must reboot-
    thoughts-?? Macbook is 6 months old and on second hard drive ( failure after 45 days).

    Hey! exact same thing happens to me... I use the keyboard shortcut to turn off the screen which is ctrl - shift - eject button. Then just poke a key and it wakes up again fine, it doesn't fix the problem but at elast you don't have to reboot. x

  • My new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???

    my new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???

    Try an SMC Reset. (System Management Controller)
    Shutdown>unplug from power for ten minutes>press and hold in the power button for ten seconds>startup again.
    Also try a PRAM Reset. (Parameter RAM)
    Shutdown. At the bootup chime, hold down CMD-Option-P-R together, wait for two more chimes, total three, then let go of all keys to finish booting,
    If this doesn't do it, run the Hardware Test in Extended
    http://support.apple.com/kb/ht1509

  • At startup, screen lights up and immediately turns off. (Pismo)

    There is a problem: when I turn on my PowerBook G3 Pismo, the backlight lamp lights up for approximately 2 seconds and then turns off. Powerbook continues to starts up and loads MacOS 9 normally BUT WITH BACKLIGHT OFF! The LCD panel 100% works because I can see operating system interface on it when I light up it by table lamp
    I've checked all connection cables – one on right side on inverter board WAS BROKEN (it become broken after many times of open/close display), I've fixed it, cover it in heat-shrink tube very accurately, but problem not solved....

    andrey,
    Since you know your way around the Pismo, I would next try replacing the inverter board and/or inverter cable.
    Since you mentioned repairing the inverter cable, are you sure the inverter cable is still not the issue, especially where it passes through the clutch (hinge)?
    The inverter converts the low-voltage DC to high-voltage AC to power the fluorescent backlight; it could be opening a circuit as it quickly heats up.
    The inverter is very inexpensive and very easy to replace. I have not priced the cable but it will be a more extensive repair.

  • HT5361 I am about to slit my wrists trying to disable what seems to be widgets. Every time the mouse goes to the edge of the screen it fades and "provides" access to completely unwanted - even hated - widgets. Where is Steve Jobs when you need him?

    I offiially hate our mac. Would work with a PC in a heartbeat.

    Are you referring to the Dock?
    If it is the Dock that is bothering you, type: command, option, D (all three keys together). That will bring the Dock on the screen permanently.
    I do not know how to remove it permanently.

  • Macbook pro Display freezes and darkens every few seconds

    Hey ,
    I just bought my Macbook pro 15 inch late 2013 few months ago , I'm new to Apple products ,
    My screen started freezing and darkening every 4 seconds , starting from when I power it , until I shut it down even If I don'tt run any programs
    I can't move the cursor while it's freezing or do anything , but for example If I write any text , the text will show up when it unfreezes , and If I'm listening to music the sound doesn't freeze . I tried the safe mode , and reseting the PRAM and NVRAM , running disk utility in single user mode and said that everything is fine , I checked my hardware using apple hardware test and also said that everything is fine , I removed the flash player thinking that it may be the problem but nothing changed . I don't know what I'm doing because as I said I'm new to all of this but I tried random things and nothing seems to work , I would really appreciate any help .
    PS. when I tried taking a screenshot of the screen when it freezes and darkens a little , it appeared normal in the screenshot .
    Hardware Information:
              MacBook Pro (Retina, 15-inch, Late 2013)
              MacBook Pro - model: MacBookPro11,2
              1 2 GHz Intel Core i7 CPU: 4 cores
              8 GB RAM
    Video Information:
              Intel Iris Pro - VRAM: 1024 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 0:42:17
    Disk Information:
              APPLE SSD SM0256F disk0 : (251 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 250.14 GB (200.02 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              com.eltima.SyncMate.kext          (0.2.5b15)
              org.virtualbox.kext.VBoxDrv          (4.3.6)
              org.virtualbox.kext.VBoxUSB          (4.3.6)
              org.virtualbox.kext.VBoxNetFlt          (4.3.6)
              org.virtualbox.kext.VBoxNetAdp          (4.3.6)
    Launch Daemons:
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] org.virtualbox.startup.plist 3rd-Party support link
              [System] rapiback.plist 3rd-Party support link
    Launch Agents:
              [System] syncmateStarter.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
              [not loaded] org.virtualbox.vboxwebsrv.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              SpeechSynthesisServer
              Dropbox
    Internet Plug-ins:
              AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
              AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              Default Browser: Version: 537 - SDK 10.9
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              Picasa: Version: 1.0 - SDK 10.6 3rd-Party support link
    3rd Party Preference Panes:
              FUSE for OS X (OSXFUSE)  3rd-Party support link
    Old Applications:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   2%          WindowServer
                   1%          EtreCheck
                   1%          locationd
                   0%          sysmond
                   0%          coreservicesd
    Top Processes by Memory:
              336 MB          Finder
              336 MB          Safari
              172 MB          iTunes
              164 MB          Dock
              156 MB          softwareupdated
    Virtual Memory Information:
              1.68 GB          Free RAM
              4.74 GB          Active RAM
              615 MB          Inactive RAM
              989 MB          Wired RAM
              555 MB          Page-ins
              0 B          Page-outs

    After the PRAM reset did you reboot the MBP and the projector?
    If not, connect and power up the projector, the power up MBP.
    The monitor itself could be on the way out, is there another monitor you can check it on.
    Another thing you can try is a VGA cable with the DVI adapter and see if that performs better.
    You can also try a different cable, since it worked fine in the past, I'm just trying to help you.
    check some of these out:
    http://support.apple.com/kb/TS4045
    http://support.apple.com/kb/HT3382
    http://support.apple.com/kb/PH7342
    http://support.apple.com/kb/PH7219
    I hope you can find something here, it's hard to source problems when the device(s) are not in front of you.
    Let me know how this works for you,
    All the best

  • Screen lights up white but nothing shows?

    when I turn on my iPod the screen lights up and when I touch the wheel I can here it clicking but the screen doesn't show up except for lit up white. The music does play but does anyone know what I need to do to get my screen fixed?

    I don't know whether this will help because it's not specifically for nanos. Worth a try.
    iPod 5th gen (with video) shows blank or white screen.

  • Screen lighting up

    HI,
    my screen on iphone4 keeps lighting up, its been doing it a few wks now, just every now and again when its on lock the screen lights up and its draining my battery. Has anyone else had this prob?
    Any help much appreciated. Thanks.
    Tony.

    i have noticed it does not light up every now and again when its on charge.

  • IPod Screen lights up but just white?

    when I turn on my iPod the screen lights up and when I touch the wheel I can here it clicking but the screen doesn't show up except for lit up white. The music does play but does anyone know what I need to do to get my screen fixed?
    Dell   Windows XP  

    I have same problem But how can I change contrast when I don't see menu? Do you know how?
    iMac   Mac OS X (10.3.9)  

  • Screen lights up, music plays, but screen is blank

    I have just recently sent in my first ipod mini to the Apple repair service. They sent me a replacement ipod. The replacement worked fine for a while but is now acting up.
    The screen lights up, and the music plays just fine, but the screen is blank.
    I have tried to plug the ipod into my computer - itunes does recognize it and updates it.
    I have also tried to reset and restore the ipod, but to no avail.
    I have contacted Apple repair services again, but they want me to send in the proof of purchase...but this is the replacement ipod that they had sent me.
    Any help would be greatly appreciated!

    Welcome to Apple Discussions!
    Just try filling out the online form...
    http://depot.info.apple.com/ipod
    If the bother to call and ask for the proof of purchase through that, then just say that it is an exchanged iPod.
    See when they say this one was purchased. Go to the link below and on the right a few scrolls down the page there is an about your apple product box. Enter your Serial Number. If it is under a year there, you need not send anything in...
    http://www.apple.com/support
    Merry Christmas
    btabz

  • Z10 screen got stuck and fades..

    Three days a go when i unlocked my phone the screen got stuck and turned black.I took out the battery and restarted the phone but after the "blackberry" sign the screen faded away.After factory resetting my phone with blackberry link 3 times (and updated the software as it appeared after the second reset) the phone turned on for some times for but the problem came back within a day.the phone is working in the background (as I receive calls and texts) but the screen shows nothing.Many people are having the same problem without getting any solutions (links below).I hope you solve my problem as soon as possible   http://supportforums.blackberry.com/t5/BlackBerry-Z10/BlackBerry-Z10-Problem-screen-fades-away/td-p/3109776/page/2http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-Crash-amp-black-screen-and-fading-logo/td-p/3108146http://supportforums.blackberry.com/t5/BlackBerry-Z10/z10-screen-got-stuck-and-fades-slowly-to-black/td-p/3096409http://forums.crackberry.com/blackberry-z10-f254/my-blackberry-z10-stuck-screen-fades-rebooting-have-red-lights-963936/
    http://forums.crackberry.com/blackberry-z10-f254/why-did-my-z10-used-stuck-fades-away-1016683/http://www.youtube.com/watch?v=Tb25Efl9uas

    Suggest you use an autoloader to install another OS, if that doesn't help then send for repairs. 

  • I accidentally dropped macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!

    I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
    I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
    Please help me..

    Accidental damage is not covered under Apple warranty.  And it seems there is much accidental damage.  Only a Genius Bar tech looking at it can tell how much it will cost to repair.
    Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
    There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs.

  • How do i retrieve data from a powerbook whose screen lights up but displays nothing? I have a firewire and a second powerbook...

    how can I retrieve data from my old powerbook? It's screen lights up, but displays only pixelated blankness. I have a second powerbook and a firewire cable....

    It would probably be correct to assume that both PowerBook computers are equipped with FireWire. The article below could possibly be of interest to you. With a bit of luck, the old computer will be recognised.
    http://support.apple.com/kb/HT1661
    Otherwise, it may become necessary to open the old PowerBook and remove the hard drive. The drive can then be connected to an appropriate external USB adapter, and read via another Mac.
    Jan

  • HT1386 After upgrading itune on my computer to 10.5 and after upgrading to ios 5 on my 3g iphone, and after backup on my computer, my iphone simplay cannot open up. The screen lights up but it I keep getting the message, "there is no sim in your phone. Th

    I have upgraded itunes on m computer to 10.5. When I connected my iphone to the computer I was told that ios 5 is ready to be downloaded, and that I should back  up my iphone before doing the download. I did. Now I want to get my iphone back on and it just can't . The screen lights up, i select language and network but it tells me that my phone cannot be activated because the activation service is temporarily unavailable. what do i do?

    Try a Hard Reset.....
    Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds.  Ignore the swipe to turn off message.

  • HT3180 My Apple TV is not responding. Screen in black and light indicator blinking fast. Cannot make it work. What should I do?

    My Apple TV is not responding. Screen in black and light indicator blinking fast. Cannot make it work. What should I do?

    Unplug it from power, wait 10-15 seconds and plug it back in.
    If it does not power up properly at that point, restore it via iTunes on the computer.

Maybe you are looking for

  • I can barely hear on my Iphone5

    I can barely hear on my iPhone 5

  • Setting the User Code for RICOH Aficio MP C 4000

    Hi guys, initially I had trouble setting my office network printer. But the thread at http://discussions.apple.com/thread.jspa?threadID=2235451 helped a lot. Now I am still stuck as the office uses "user codes" for each of the staff but when I tried

  • 5D mark III lens correction problem with dark shots

    Just found a new irritating problem with 5D mark III and Lightroom 4 (currently on 4.2). I shot quite a few shots in the dark over the weekend using high ISO (6400-16000), with EF 24-70 f/2.8L. If I enable the lens profile correction on the dark shot

  • Preview zoom button doesn't respect dock location?

    When I open a PDF document (perhaps others, too) in Preview and zoom in, then press the zoom button (aka enlarge, the green button on the top left of the window), the window seems to zoom to a size which leaves room for the dock at the bottom ... but

  • How to write a procedure with the table name as an argument

    I'm very new to Oracle, usually developing in SQL server. I would like to write a procedure that accepts a table name and then does a SELECT * FROM [table name] order by CollectionDate. In SQL I would build up a varchar variable and then execute it.