Screen lock problems with Alarm, etc...
The Alarm notification window goes away too quickly.
I have the screen lock setting ON (so I have to slide the yellow ball up). I also have the screen lock time set to one minute.
When the alarm goes off (IF it goes off, which is another bug) the screen turns on with the slider indicating an alarm is going off, but it quickly goes away.
It doesn't stay active for the minute I have set.
Thus, I have to hit the button, then unlock the screen to snooze the alarm.
Also I noticed that the screen lock, well, works whenever it wants to. Sometimes Im asked to slide the ball, other times I am not. I should be qued to do this every time I tap the power button.
All these little bugs are making me a little leery of my Pre purchase...
Post relates to: Pre p100eww (Sprint)
I was on vacation this weekend and set my Pre alarm to go off both mornings. The first morning it went off, but the touch screen, volume buttons, unlock, etc. were all frozen. Nothing had any effect on the Pre whatsoever. Had to completely shut down the Pre.
The next morning, it simply didn't go off at all. Triple-check the settings, and all were correct. Just deecided to not work.
Similar Messages
-
Screen says problem with printhead
The printer screen says problem with printhead. I tried the trouble shooting directions, and it did not work. several colors may be almost out of ink...is that an issue? i need my printer!! Help!
¡ Hi !, Penguin1: Please, see the manual/guide, for ... h10032.www1.hp.com/ctg/Manual/c04365944.pdf
-
The screen shows problems with iCloud only choices are ignore or settings, however nothing I do will unlock it from this screen, cannot power off keeps that bubble on the screen. What do I do?
Try this now.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Has anyone else had a screen separation problem with the ipad?
Has anyone else had a screen separation problem with the ipad?
Does it really matter whether anyone else has? If you have, that's a problem for you whether or not anyone else has experienced the same issue. Call Apple tech support or take the iPad to an Apple Store, if there's one in your area, and they'll replace the iPad unless it's determined that the problem was caused by some sort of accident rather than a factory defect.
Regards. -
Pessimistic lock problem with Sybase
I am having a problem with performing pessimistic lock
using Toplink and Sybase/HSQLDB.
Code example:
Object o = uow.readObject(...
uow.refreshAndLock(o);
//Change o
uow.commitAndResume();
==========================
I receive an Exception:
Local Exception Stack:
Exception [TOPLINK-4002] (OracleAS TopLink - 10g (9.0.4.2) (Build 040311)): oracle.toplink.exceptions.DatabaseException
Exception Description: java.sql.SQLException: Unexpected token: FOR in statement [SELECT t0.CLASSIDENTIFIER, t0.DB_VERSION, t0.OBJECTID, t1.OBJECTID, t1.NAME, t1.DESCRIPTION, t1.TYPE, t2.OBJECTID, t2.MULTIPLE_SERVERS_POLICY, t2.OUTAGE_POLICY, t2.INCOMING_SCRIPT, t2.OUTGOING_SCRIPT, t2.OUTAGE_SCRIPT FROM ROOT t0, LDAPSERVICE t2, SERVICE t1 WHERE ((t0.OBJECTID = 252) AND (((t2.OBJECTID = t0.OBJECTID) AND (t1.OBJECTID = t0.OBJECTID)) AND (t0.CLASSIDENTIFIER = 'ORM.LdapService'))) [b]FOR UPDATE OF * NOWAIT]
=================
As you can see Toplink is trying to execute illegal statement : "....FOR UPDATE OF * NOWAIT"
Do you have any idea what I'm doing wrong?Duplicate posting Pessimistic lock problem with Sybase
-
W530 Num Lock problems with VMWare
All, I am having a major problem with VMWare and the W530 "Num Lock". When I move the cursor into the VMWare window a message comes on say "NUM LOCK: ON" when I move it out of the VMWare window I see message "NUM LOCK: OFF". I do not have any key on the keyboard to disable Num Locl. There are utilities I can run in the SUSE VMWare image to capture the key binding and remap, but I do not have anyway of turning Num Lock on or off to capture
the key binding.
Suggestions ?
Solved!
Go to Solution.Hello and welcome,
A couple of things you might try. Don't know if they'll work on your W. They do work on some other Lenovo machines.
Plug in a USB keyboard that has numlock. Use that and see if it sticks after reboot.
Use the on-screen keyboard. Click "options" and enable numeric keypad. That should add a keypad and NUMLOCK key to the on-screen keyboard. Use that. See if it works - and if it sticks.
(Windows 7) Start -> Accessories -> Ease of Access -> On-Screen Keyboard.
A little more detail here: http://www.beezmo.com/geezblog/?p=259
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Black Screen - Broken Screen or Problems with OS?
Dear all
I'm really hoping someone can help
My Q10 went black screen on Saturday and just turned itself off. I didn't drop it, but remember using it in a garage about 30 minutes earlier for a 5 minute call, and recall that the phone had gotten quite hot. But i had let it cool (didn't use it) afterwards.
I read through a few forums and tried a few battery pulls - no luck. I tried leaving the battery out overnight to reduce residual power - no luck.
All i could see to this point was when i pressed power on, the red light would come on briefly and nothing then appeared on the screen. Occasionally i do get the red light as if a message was there. but nothing was working
So i thought i would take the plunge on Monday and connected to Link, where Link recognised the phone and i was able to perform a back up of files etc. i had done it recently anyway, so wasn't too worried.
Then i decided to reload the software via Link.
First attempt was unsuccessful, but second attempt, Link updated Link software, then updated device software, removed data etc. But then i got a message saying "device setup incomplete - Disconnect device from computer, and complete setup app on my device, then reconnect'
the problem is, i still have a black screen and no amount of swiping etc brings it back to life.
Does anyone have any thoughts about next step?
I'm thinking
a) Screen is broken (maybe it overheated)
b) Maybe i should use an autoloader to reinstall OS - problem is i'm not sure what software version i was up to
c) Maybe i should listen to someone in this community who might have an even better idea or experience with what i am going through.
the only saving grace is that i had my phone on silent, so its not buzzing etc everytime something happens!
Thanks for your help
HughI've got a similar problem: I had it working, but had terrible sound problems with various components (DVD etc). I updated my HK firmware and that seems to have fixed all the problems with the other components but create new ones with ATV2. I'm running HDMI 1.4 from the ATV2 to the HK 255 amp, and no matter what I try and do, I can't seem to get any picture OR sound...
Does anyone know of a solution?
thanks -
I have enrolled for the apple developer program but apparently already have an account with iBooks, cant have this it seems.how do I change my iBooks account, is this the apple id for my iPad and if I change this will it cause problems accessing iTunes etc?
I guess nobody knows if the crash that occured was legitimate or not? Apple phone support could do nothing for me, so I guess I am left to drive 45 minutes to the nearest store.
-
Nano problems with Alarm clocks(lik e Luna or others)
I have a new nano 4gb, and an Xtrememac Luna... My old ipod 2nd gen worked perfecly, the new nano has problems instead.. When my alarm function lit the ipod, it does not play the song, but remain in pause... The nano wakes up, but old nano started to play the song, this stands in pause. Why this? Can I hope in a fix or something? many people have this problem...
Possible solutions?
thanks in advanceSince there was no reply from Apple so far I called their service today.
The claimed that this problem was not known with the devices which they are selling and that they can't tell about 3rd party alarm clocks.
Big news! Who would have thought of that answer?
Well I then called the manufacturer of my alarm clock which is called "auvisio", one of these cheap copies. They knew about the problem with the nano 3G on thier device and said that they can't offer a solution so far. They offered RMA which I would say is quite nice of them but it doesn't help me much with my wake-up-problem in the morning.
I already settled with the thought that I would have to buy the more expensive Apple stuff but as I read above even Bose seems to have the problem. Complete confusion.
Hopefully firmware 1.0.3 will be released soon and can finally solve these problems. Release 1.0.2 definitely was a step into the opposite direction... -
IChat screen sharing problem with AIM
Hi,
I have two laptops - one is a MacBook and the other is a PowerBook. Both are running Leopard. At first, when I had tried using the screen sharing feature of iChat, it had worked flawlessly on both the Bonjour network as well as the AIM network.
Now, for some reason, I cannot get screen sharing to work using the AIM network. I am able to conduct text chats, audio chats and video chats, but no screen sharing over AIM. Screen sharing over the Bonjour network continues to work without a problem.
Any advice?For some reason ichat does not work when internet sharing is on.
Therefore that might be the problem with your screen sharing since you seem to not be able to get it to work (audio is part of the feature and if you have recently relocated you might not realize that internet sharing is on). -
Screen display problem with Lenovo 3000 N100
Hi,
My Lenovo laptop is having a problem with screen display. When i boot the laptop (keeping the screen at 90 degrees to the key board) , there is no display . However, when i tilt it down (lesser than 45 degrees) the display comes back to normal.
In addition, the mystery is that this doesnt happen if do the same after 5 minutes. No matter at what position i have the screen, it works perfect!
Is there a solution for this ? Can some one explain why the display is normal after warming up, but not in the begining (booting) stage.
Senthil.Lose / pinched wires possibly.
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-63486upper
I had to re-seat mine , and I still have to wiggle the upper right corner .
A common issue I here,although I just purchased a second used N100 and the screen has no issures. -
Hi,
Have had a problem with the alarm on my iPhone since I updated my 3GS to IOS4. The problem is I had about 10 recurring alarms before I updated that have literally multiplied by thousands now. There are so many i cannot even get into the alarm part of the clock app with out it crashing. This is very annoying because so many go off at once that it causes the iPhone to crash because of RAM shortage and this happens every day, a solid hour of my iPhone going crazy between the hours of 7am to 8 am. Worse still when i upgraded to the iPhone 4 the bug came with it!
Would anyone have any idea how to fix this? I keep praying for a patch!
ThanksThanks!!! Worked a charm!
I tried restoring before but never as a new phone!
Cheers man!! Much appreciated! -
Locking problem with Postgresql
I'm having some intermittent deadlock problems with Postgresql (7.1 and
7.2) and Kodo 2.2.3 and 2.2.4.
It appears to be a conflict between my JDO and my JDBC code. I reduced
the problem section to the
method found below.
I am running 10 threads concurrently in this test script. Each thread
is calling the "runQuery()" method
below which creates a PersistenceManager, starts a transaction, runs an
unrelated JDBC query, and
then commits the transaction.
The transaction is unrelated to the JDBC query, but it seems to
interfere with it. After a random number
of transactions, it locks up. Now that I've upgraded to 7.2 and 2.2.4,
it doesn't seem to lock with an
"UPDATE waiting" message like it did with 7.1 and 2.2.3, but the script
still hangs. It's strange,
because if I remove the superfluous Transaction "begin" and "commit", it
runs fine.
Any ideas on what might cause this?
Thanks,
-Mike
private void runQuery() throws AppException {
PersistenceManager pm=JDOFactory.getPersistenceManager();
Transaction tx = pm.currentTransaction();
tx.begin();
tx.commit();
Connection conn=null;
Long listrunid=new Long (281);
try {
conn = JDOFactory.getConnection();
String sql="update summaryreport set
totalforwarded=totalforwarded+1 where listrunid=listrun.id and
listrun.publicid=?";
PreparedStatement stmt = conn.prepareStatement(sql);
stmt.setLong(1, listrunid.longValue());
_log.debug("executing: "+stmt);
int result=stmt.executeUpdate();
_log.debug("done executing: "+stmt);
if (result==0) {
_log.error("Nothing to update for id="+listrunid);
catch (SQLException ex) {
_log.error("SQLException: "+ex.getMessage());
throw new AppException (ex.getMessage());
finally {
if (conn!=null) {
try {conn.close();}
catch(SQLException ex) {
_log.warn(ex.getMessage());
Mike BridgeHi Patrick,
You're right, that should be in a finally clause. However, my script seems
to hang after about 10 to 30 of the 1000 iterations.
-Mike
Patrick Linskey wrote:
Mike Bridge <[email protected]> writes:
Hi-
Here's a standalone program that shows the problem. If you remove the
"tx.begin()" and "tx.commit()" lines,
it seems to work fine. With them, I get some odd NullPointerExceptions at
the start, then later it hangs.FTR, it looks like the hang is caused by the bit where threadDone() is
only invoked when an exception is not thrown. If you move the
threadDone() invocation to a finally clause, the hang will probably go
away.
-Mike
import java.util.*;
import javax.jdo.*;
import java.sql.*;
import com.solarmetric.kodo.impl.jdbc.*;
* create table testtable (id INT, value INT);
* insert into testtable(id, value) VALUES (1,0);
public class ConcurrentTest {
private static JDBCPersistenceManagerFactory factory = null;
public boolean threadsaredone=false;
public int iterations=0;
public int threadsdone=0;
public static Connection getConnection() throws SQLException {
javax.sql.DataSource ds = (javax.sql.DataSource)
factory.getConnectionFactory();
return ds.getConnection ();
public static PersistenceManager getPersistenceManager () {
return factory.getPersistenceManager ();
static {
factory = new JDBCPersistenceManagerFactory ();
factory.setNontransactionalRead (true);
factory.setRetainValues (true);
factory.setOptimistic (true);
private void runQuery() {
PersistenceManager pm=getPersistenceManager();
Transaction tx = pm.currentTransaction();
tx.begin();
Connection conn=null;
PreparedStatement stmt=null;
int id=1;
try {
conn = getConnection();
if (conn==null) {
System.out.println("Connection is null");
System.exit(1);
String sql="update testtable set value=value+1 where id=?";
stmt= conn.prepareStatement(sql);
stmt.setLong(1, id);
// System.out.println("executing: "+stmt);
int result=stmt.executeUpdate();
// System.out.println("done executing: "+stmt);
if (result==0) {
System.out.println("Nothing to update for id="+id);
catch (SQLException ex) {
System.out.println("SQLException: "+ex.getMessage());
finally {
if (conn!=null) {
try {conn.close();}
catch(SQLException ex) {System.out.println(ex.getMessage());}
if (stmt!=null) {
try {stmt.close();}
catch(SQLException ex) {System.out.println(ex.getMessage());}
tx.commit();
public synchronized void threadDone(int threadid) {
threadsdone++;
System.out.println("Thread "+threadid+" is done");
public synchronized void iterationstarted() {
iterations++;
System.out.println(" ** Starting iteration "+iterations);
public void launch(int maxthreads, int repperthread) {
runQuery();
for (int i=0; i<maxthreads; i++) {
System.out.println("launching thread "+i);
Thread mythread=new MyThread(this, i, repperthread);
mythread.start();
while ( threadsdone<maxthreads ) {
try {
Thread.currentThread().sleep(2000);
catch (InterruptedException ex) {
System.out.println("Interrupted: "+ex.getMessage());
System.out.println("threads reported finished: "+threadsdone);
System.out.println("DONE!");
public static void main (String[] args) {
int maxthreads=10;
int repperthread=100;
ConcurrentTest ct=new ConcurrentTest();
ct.launch(maxthreads, repperthread);
private class MyThread extends Thread {
ConcurrentTest testobj;
int threadid;
int repetitions;
public MyThread(ConcurrentTest testobj, int threadid, int repetitions)
this.testobj=testobj;
this.threadid=threadid;
this.repetitions=repetitions;
public void run() {
try {
for (int i=0; i<repetitions; i++) {
iterationstarted();
System.out.println(" START iteration "+i+" for thread "+threadid);
testobj.runQuery();
System.out.println(" FINISH iteration "+i+" for thread "+threadid);
testobj.threadDone(threadid);
catch (Exception ex) {
ex.printStackTrace();
System.out.println("ERROR: "+ex.getMessage());
Patrick Linskey [email protected]
SolarMetric Inc. http://www.solarmetric.com
Mike Bridge -
I have two issues with screen lock on my Q10. First, when the phone is in sleep mode, pressing any of the number keys wakes up the phone and activates the lock screen. I would like to know why this happens -- it doesn't make sense to me that any of the keys should work when the phone is locked. Is this a software issue?
Secondly, when I remove the phone from the holster, the lock screen activates which is fine (I have the phone set to lock when in holster). However keys get pushed randomly while removing the phone from the holster. For example, the password field can get populated as the phone is being removed. The alt key and the shift key also can get pushed inadvertently. Again, is this a software issue? It doesn't make sense that keys should be active until the phone is well out of the holster and the lock screen is activated.Hey Calawson,
Thanks for the detailed reply.
Also just to clarify my reply, all the number keys and Q, A will wake up the screen. There is no reasoning why these keys have been chosen to wake up the BlackBerry Q10 smartphone.
I can definitely see your concern as if you are putting the BlackBerry Q10 in a holster and the padding is touching the ALT or Shift key it will be enabled when you unlock or even wake the screen of the BlackBerry Q10.
There is no way to stop the ALT or Shift key from not being active when BlackBerry Q10 is locked.
I hope this information helps, be sure to let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Hi,
increasingly of late, and now permanently, when the screen locks on my 808, either by the slider or timer, the screensaver doesn't appear.
The screen stays as it is and bright all the time. The screen is locked and the lock symbol appears, but no screensaver.
I used to be able to solve it by rebooting several times, but no longer.
Anyone seen this before or got any ideas how to solve it?
Cheers,
AntonyHi macaroni,
the following procedure might help you - it worked for me a few times:
Go to Menu -> Settings -> Themes -> Screensaver.
The hook on the left side might be on "none" or "big clock" or "Sleeping Screen", it does not matter.
Now select "none" and select your desired screensaver again (if you choose Sleeping Screen, you'll see a configuration window, go back).
Lock your phone and see if the screensaver appears.
6600 -> N90 -> N95 8GB -> (skipped N97) -> N8 -> N950 -> 808 PureView
Maybe you are looking for
-
I have Photoshop CS5 and a Nikon D 810 camera. I have downloaded Camera Raw 8.8 & DNG converter. I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong? Thanks!
-
When is it Advanced Compression ? What about HCC?
The below is from the Admin Guide Note: Hybrid Columnar Compression is dependent on the underlying storage system. See Oracle Database Licensing Information for more information. The below is from the Oracle® Database PL/SQL Packages and Types Refere
-
Hi i read document of java bean barcode. but i work with report6i and in this document i read i must i had to use barcode font . i dont have this font i couldn't find any information about it. i appreciate you if u can help me. by regard Nahid Bastan
-
Error message after installing OS
My son's G4, 1.42 GHz (isn't this what's called a quicksilver - mirror-like panel on front?) Power Mac's hard drive crashed. I replaced the drive with a 320 GB parallel ATA drive (Western Digital). I formatted drive as 1 partition and tried to instal
-
Shortcut on MAC for a filter menu
In windows I always use ALT+T shortcut to open Filter menu in Photoshop. That make my work faster. How can I do the same thing on MAC? I can not understand. Help please.