Screen lock switch nokia 5530xm
How to avoid to use screen lock switch ? Because the switch looks like easier to loosen...!!! Anymethod to prevent to use the lock switch to lock the screen?!
lol ..... you are totally right i'll say both next time and i'll leave them to decide which one suits them ...
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2
Similar Messages
-
Screen Lock Switched to Voice Activate
Somehow my screen lock has switched to voice activation and the keyboard doesn't activate. Voice activtation doesn't seem to accept anything. I have powered down and powered up and the same thing returns.
Any suggestions?You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
Screen Lock button set to Mute
My screen lock switch is functioning only to mute the IPAD, I can't figure how to have it function as a screen lock button
Settings > General > Use Side Switch To (http://support.apple.com/kb/HT4085)
-
I have iPhone 4 and 4s. WiFi is automatically switching off on both phones when they are inactive (screens are locked). It is connecting back after some seconds I unlocke the phone. But because I have no subscribtion for the Cellular data usage, I am being cuted from Internet all screen-locked period. All that time people are not able to reach me by email, skype, or other programs using Internet. It is quite uncomfortable, especially when waiting for something important! Is there a way to change this setting?
The iPhone does not shut down WiFi completely when asleep. It does use a power conservation mode. You should still receive notifications. There is no setting for this. It should work for you as it does for me if you don't have a network problem.
There are lots of problems reported with D-Link routers and they don't have a great reputation. If there is no help available from D-Link you may want to consider installing the DD-WRT firmware. It's available for the D-Link 615. See here for information: http://www.dd-wrt.com/site/index
By the way, you do have Notifications enabled for the Apps you are talking about right? See Settings -> Notifications and Mail, etc. -
Nokia E6 issues -- Screen lock and Connectivity
I have two problems with Nokia E6. Struggling to get resolution
1. My screens get locked automatically with 7-8 sec even though I set up the screen locking time in more than 1 minute. It goes in lock state even you have active application running like reading web page or email. I went to local Nokia priority center and restored to factory setting. Still no luck. I bought the piece in July and I am facing this issue from last 2 months
2. From last 2 days, my internet connection is not working. Service provider has mentioned everything is fine with network. I rebooted the phone and tried to resave the internet connection setting, but no luck.
Please help to resolve these issuesTo double-check you have Nokia Belle Referesh, please, enter *#0000# and give use your version. Furthermore, because this is related to MMS,
which network operator do you use, in which country? Finally, because these MMS are send by someone,
which phone is used by the sender?
Is he on the same network? -
Nokia 701 call screen lock feature?
Hi nokia community,
was wondering if there is call screen lock feature in nokia belle? Because i couldn't find it any where in my nokia 701, even there is no option to edit the normal lock screen or button?
Why there are bugs and such small and important features are missing in nokia's belle OS?
Please help me feel like i'm using a smartphone.
Any help would be highly appreciated.
geekObelle
Solved!
Go to Solution.Hmm..I am not sure..call nokia care in your country.
I am not having anything to complain about regarding how my 701 behaves with incoming calls or things about "lock screen"..sorry.
PS Try out "Nokia sleeping screen" for nice "lock screen" features when phone is asleep..Nokia store..
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro -
XFCE - switch to US keyboard layout on screen lock
I have a dual keyboard layout, and when xscreensaver triggers, I have no indication which language am I in. This is not a problem with gnome screen saver, but with xscreensaver that comes with xfce4 there is no indicator, which is annoying. Also, no indication that caps-lock is on, but at least this could be detected by the LED.
I modified /usr/bin/xflock4, adding following line to beginning of the file:
/usr/bin/setxkbmap -layout "us,ru" -option "grp:lalt_lshift_toggle,terminate:ctrl_alt_bksp"
it works, but only when I lock the screen using "lock screen" button on xfce panel. When screen locks up due to timeout, keyboard layout stays as-is. It looks like there is a different command being used by power manager to turn off screen. Anyone knows how to hook into this?
Last edited by asg1448 (2014-07-28 22:40:09)More detail: Some keys on the keyboard do work, ie: caps lock toggles the led, and the function keys across the top seem to work {that is I can adjust brightness, and so forth}
the letter and numbers, and perhap others do not work. -
701 side lock broken - Nokia Taiwan refuses guaran...
Three days ago the side lock key on my eight-month-old 701 broke in the course of normal use - I didn't drop it or anything like that - I was just trying to lock the screen in the normal way. There is plainly a mechanical fault as the slide doesn't spring back when you move it.
I took it into Nokia Care here in Taipei and, to my surprise, they told me a) that it can only be fixed by replacing the phone's motherboard and b) that I would have to call Nokia to see whether they were willing to cover it under the guarantee. (It seems that the few remaining Nokia care centres in Taiwan are contracted out and given little or no discretion.) Interestingly they showed me another 701 motherboard with the slide broken in the same way.
Yesterday, Nokia Taiwan called back saying that the limited guarantee specifically excludes damage to the exterior of the phone and that if I wanted it repaired I would have to pay for it.
I have now checked the terms of the guarantee (available in Chinese on Nokia Taiwan's web site) and this simply isn't true. There are exclusions for improper use or modification, acts of god, normal wear and tear, replacement of consumables (fuses are specifically mentioned) and damage to or breakage of aerials, but nothing about damage to switches or anything else of on the exterior of the phone.
Regardless of the details of the guarantee exclusions, I am appalled at Nokia Taiwan's attitude, and would be very grateful if other users could tell me if they have had similar problems with side locks, or with repairs that should be covered under guarantee.
Alan@AlanWatson
Always a warranty issue with items exposed to "wear and tear" be it micro USB connector, headphone socket and presumably "lock switch" unfortunately.
Happy to have helped forum with a Support Ratio = 42.5 -
E7 Screen Locking / Screen Freezing
My E7 is screen is freezing up after a phone call or just after general use. It keeps happening every day. I must force a power rebooot to get the phone working again. I have called Nokia and have exhusted every option which included reloading Bella.
PROBLEM IS STILL HAPPENING, CAN SOME ONE PLEASE HELP ME?
Last resort is Nokia want's me to send my phone to Texas for a tech to investagate the problem. I think there is some kind of software problem with the locking of the phone screen and the locking switch logic on the side of the phone. When the problem happens the sceen will not work to my touch. The sceen freezes without touching it.
I really like this phone when its working.
StephenWhen you reinstalled Belle did you/Nokia suite backup the phone & then, after reinstalling Belle, reinstall the backup as sometimes doing that can affect the phone due to there being apps on the on it which aren't compatable but are installed again with the backup, if this is the case & you didn't return to factory conditions & then run the Belle install you may want to try that but when reinstalling the backup just reinstall everything but applications & settings, you will then need to setup the phone from scratch & reinstall any apps from Nokia store.
If you send the phone anywhere they'd probably just reformat the phone & reinstall Belle anyway.
Hth, -
I have just updated my N8 Email/Calendar function, using Nokia Suite. My phone is on Belle, but not Belle Refresh as my UK operator (O2) has not authorised the update. All appeared to go smoothly. However, the screen lock function seems to have changed. Previously, sliding the switch locked the screen and completely blanked it. Now, sliding the switch locks the screen but does not blank it - it remains on my homepage (not a screensaver). I have looked for obvious settings that would change this but can't find any. Any ideas? I would like to go back to the blank screen when locked if possible, to save battery power.
Chris
Solved!
Go to Solution.Thanks- I had already done the turnoff/on again trick twice but you prompted me to try a thrid time. Third time lucky. Don't you just love software!
-
N8 screen lock/off when ringing
Nokia N8 screen is locked & off when phone is ringing. I have to unlock the screen with switch on the side in order to see who is calling.
thanksI had the exact same problem. My phone came back from the repair center and had this issue. There are other threads on the same topic but no one seems to have a solution.
Was your phone returned to you from the service center? -
SOmetimes I get a blank screen on my nokia N8 whil...
SOmetimes I get a blank screen on my nokia N8 while receiving calls. Because of that I can't see the answer button and can't pick up the call. I have to lock and then unlock the phone via hardware switch and it will show the screen. It usually happens around 30-40 % of the time.
Do you think its a software issue (some application problem) or something wrong with the phone... Please adviseWhen you put the phone up to your ear, the proximity sensor should turn the display off to save battery. With my phone it comes back on the moment I move it away from my face.
Do you have the camera in a case? I wonder if the case is maybe obscuring the proximity senser which is next to the front camera? -
Windows 8.1 Lock Screen drops network connectivity when screen locked using Win+L
Hi!
I was sent here from Microsoft Community forum. The question is:
Since Windows NT 4.0 I'm using Lock Screen to prevent people from accessing my computer when I'm leaving my room. First I was using CTRL+ALT+DEL / Lock Screen, then switched to Win+L keyboard shortcut when it was first introduced.
Everything was fine until I switched to Windows 8.1 computer (Sony Vaio Duo 13 with Broadcom wireless network controller). This machine is 8.1, not 8.0 upgraded to 8.1.
My problem is that when I hit Win+L combo the Lock Screen (with clock etc.) is displayed. Then, despite I have configured not to turn off display, the screen goes blank (after 30 seconds since lock) and network connectivity is cut off from desktop
apps (I suspect the system goes into Active Standby mode, because Modern UI apps like Tune-In radio keep working fine).
100% repeatable scenarios:
## Scenario 1 ##
1) Log in
2) Open desktop app that uses network connectivity. Outlook 2013 from Office365 subscription
3) Check that it has connected
4) Lock screen (Win+L)
5) Wait for 30 seconds (first incorrectly posted as few minutes) as screen goes black
6) Unlock screen (using password)
7) In right corner of Outlook app you will see "Unable to connect with Exchange server" and few seconds later it will reconnect sucessfuly
## Scenario 2 - the more annoying ##
1) Log in to Win 8.1 computer
2) Connect to it using SMB (in my case I wanted to transfer 30 GB of files from local hard drive C: to server) \\COMPUTER-NAME\c$ from Windows Server 2012 R2
3) Start copying files from computer to server
4) Lock the screen on computer
5) As soon as screen goes black server displays message "Lost connection to the resource. Try again?"
6) Unlock screen on the computer
7) Click "Try again" and it will continue copying files
My power settings are set to go into stand by after 5 hours and if I not lock the screen it doesn't go to sleep before 5 hours.
When I lock the screen using Win+L it goes into (probably Active) Standby mode.
Is there any way to prevent it from going to Active Standby when locking screen? I need the screen lock for security reasons but I don't want it to drop my network connectivity on remote desktops, file transfers and other desktop activities before 5 hour
timeout.
This issue is not related to more or less known wireless network connectivity problem that happens to many Intel Haswell computers. Mine doesn't exhibit those problems. I can easly push 100 - 200 GB of wireless data without network drops.
Computer information:
Sony Vaio Duo 13: SVD1322C5E
Intel Core i5-4200U
8 GB RAM
Windows 8.1 Pro 64-bit
Broadcom 802.11n SDIO network adapter
Originally posted at: http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/windows-81-lock-screen-drops-network-connectivity/099f16bd-b00d-4ba9-b833-48bf1d55ffe4
Best regards,
SergiuszSame issue here using Surface 3 Pro with either internal WLAN or MS USB LAN Adapter. I'm frequently used to keep open connections over SSH to some servers. On switching to lock screen explicitly by pressing Win+L or implicitly due to idle timeout all
connections to servers are lost. In addition, I don't get any notifications on incoming Skype messages (using Skype for desktop) when lock screen is active.
Neither NIC is showing "Power Management Tab" according to step 5 of instructions above.
Additionally observing USB LAN NIC seems to be kept active after activating lock screen, but traffic stops (according to its flashing light) when lock screen is switching off display. Blanking display doesn't seem to be adjustable in System Settings (Energy
Options accessed through Win+X).
Find attached log file of powercfg -energy -duration 300 ...
Log file is in German. It basically claims unset timeouts for deactivating display while running attached to power supply though lock screen is turning off displays within 1-2 minutes.
Energieeffizienzdiagnose-Bericht
Computername
KRITIAS
Überprüfungszeit
2015-01-10T15:07:47Z
Überprüfungsdauer
353 Sekunden
Systemhersteller
Microsoft Corporation
Systemproduktname
Surface Pro 3
BIOS-Datum
10/16/2014
BIOS-Version
3.11.0350
Betriebssystembuild
9600
Plattformrolle
PlatformRoleSlate
Netzbetrieb
true
Prozessanzahl
67
Threadanzahl
1319
Berichts-GUID
{1a168801-c189-46fe-811c-235e6bf2bd0d}
Analyseergebnisse
Fehler
Energierichtlinie:Verdunkelungszeitlimit ist deaktiviert (Netzbetrieb)
Der Bildschirm ist nicht so konfiguriert, dass er nach einer Zeit der Inaktivität verdunkelt wird.
Energierichtlinie:Standbyzeitlimit ist deaktiviert (Netzbetrieb)
Der Computer ist nicht so konfiguriert, dass nach einer Zeit der Inaktivität automatisch der Wechsel in den Standbymodus erfolgt.
CPU-Auslastung:Prozessorauslastung ist hoch
Die durchschnittliche Prozessorauslastung während der Ablaufverfolgung war sehr hoch. Das System verbraucht weniger Energie, wenn die durchschnittliche Prozessorauslastung sehr niedrig ist. Überprüfen Sie die Prozessorauslastung für einzelne Prozesse,
um festzustellen, welche Anwendungen und Dienste den größten Anteil an der Gesamtprozessorauslastung haben.
Durchschnittliche Auslastung (%)
45.31
Warnungen
Plattform-Zeitgeberauflösung:Plattform-Zeitgeberauflösung
Die standardmäßige Plattform-Zeitgeberauflösung beträgt 15,6 ms (15625000 ns) und sollte immer dann verwendet werden, wenn sich das System im Leerlauf befindet. Wenn die Zeitgeberauflösung erhöht wird, sind die Technologien zur Prozessorenergieverwaltung
möglicherweise nicht wirksam. Die erhöhte Zeitgeberauflösung kann auf eine Multimediawiedergabe oder Grafikanimationen zurückzuführen sein.
Aktuelle Zeitgeberauflösung (100-ns-Einheiten)
10007
Maximale Zeitgeberperiode (100-ns-Einheiten)
156250
Plattform-Zeitgeberauflösung:Ausstehende Zeitgeberanforderung
Von einem Programm oder Dienst wurde eine Zeitgeberauflösung angefordert, die kleiner als die maximale Zeitgeberauflösung der Plattform ist.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Energierichtlinie:Bildschirmzeitlimit ist lang (Netzbetrieb)
Der Bildschirm ist so konfiguriert, dass er nach mehr als 10 Minuten Inaktivität ausgeschaltet wird.
Zeitlimit (Sekunden)
900
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Verbundgerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_0250
Portpfad
1,2
Standbydauer (%)
14
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Surface Ethernet Adapter
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_07AB
Portpfad
1,1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Generischer USB-Hub
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_1006
Portpfad
1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Eingabegerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_0797
Portpfad
1,3
Standbydauer (%)
14
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
firefox.exe
PID
5968
Durchschnittliche Auslastung (%)
1.57
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\xul.dll
0.60
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\mozjs.dll
0.27
\SystemRoot\system32\ntoskrnl.exe
0.16
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
System
PID
4
Durchschnittliche Auslastung (%)
0.59
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.24
\SystemRoot\system32\DRIVERS\igdkmd64.sys
0.12
\SystemRoot\system32\DRIVERS\avc3.sys
0.07
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
dwm.exe
PID
6264
Durchschnittliche Auslastung (%)
0.47
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.10
\Device\HarddiskVolume4\Windows\System32\dwmcore.dll
0.09
\SystemRoot\System32\drivers\dxgkrnl.sys
0.06
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
Skype.exe
PID
11008
Durchschnittliche Auslastung (%)
0.26
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Skype\Phone\Skype.exe
0.11
\SystemRoot\system32\ntoskrnl.exe
0.05
\SystemRoot\System32\win32k.sys
0.04
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
svchost.exe
PID
1528
Durchschnittliche Auslastung (%)
0.25
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.16
\Device\HarddiskVolume4\Windows\System32\ntdll.dll
0.02
\SystemRoot\system32\drivers\ndis.sys
0.01
Informationen
Plattform-Zeitgeberauflösung:Zeitgeberanforderungsstapel
Der Stapel mit den Modulen, die für die niedrigste Plattform-Zeitgebereinstellung in diesem Prozess verantwortlich sind.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Aufrufender Modulstapel
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\d3d9.dll
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\CEF\libcef.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
Energierichtlinie:Aktiver Energieplan
Der derzeit verwendete Energieplan.
Planname
Ausbalanciert (OEM)
Plan-GUID
{381b4222-f694-41f0-9685-ff5bb260df2e}
Energierichtlinie:Energieplancharakter (Akkubetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Akkubetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:Videoqualität (Akkubetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Videoqualität und Energieeinsparung ausbalancieren
Energierichtlinie:Energieplancharakter (Netzbetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Netzbetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:802.11-Energierichtlinie für Drahtlosverbindungen ist "Maximale Leistung" (Netzbetrieb)
Die aktuelle Energierichtlinie für 802.11-kompatible Drahtlosnetzwerkadapter ist nicht für die Verwendung von Energiesparmodi konfiguriert.
Energierichtlinie:Videoqualität (Netzbetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Für hohe Videoqualität optimieren
Systemverfügbarkeitsanforderungen:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.
Akku:Akkuinformationen
Akku-ID
1F11LGC_LGCX863568
Hersteller
LGC_LGC
Seriennummer
1F11
Chemie
LION
Langfristig
1
Versiegelt
0
Zyklusanzahl
33
Vorgesehene Akkukapazität
42157
Letzte vollständige Aufladung
44209
Funktionen der Plattformenergieverwaltung:Unterstützte Standbystatus
Mithilfe von Standbystatus kann der Computer nach einer Zeit der Inaktivität in einen Energiesparmodus wechseln. Der S3-Standbystatus ist der standardmäßige Standbystatus für Windows-Plattformen. Im S3-Standbystatus verbraucht der Computer nur die Energie,
die notwendig ist, um den Arbeitsspeicherinhalt zu bewahren und die Arbeit mit dem Computer schnell fortsetzen zu können. Sehr wenige Plattformen unterstützen den S1- oder S2-Standbystatus.
S1-Standbymodus unterstützt
false
S2-Standbymodus unterstützt
false
S3-Standbymodus unterstützt
false
S4-Standbymodus unterstützt
true
Funktionen der Plattformenergieverwaltung:Unterstützung von Verbindungsstandby
Mit dem Verbindungsstandby kann der Computer in einen Stromsparmodus wechseln, in dem er immer eingeschaltet und verbunden ist. Der Verbindungsstandby wird soweit unterstützt anstelle der Systemstandbystatus verwendet.
Verbindungsstandby unterstützt
true
Funktionen der Plattformenergieverwaltung:Die adaptive Bildschirmhelligkeit wird unterstützt.
Dieser Computer ermöglicht die automatische Helligkeitsregelung der integrierten Anzeige durch Windows.
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
0
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
1
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
2
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
3
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Gerätetreiber:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben. -
4.2 - No longer able to play TV Shows and Movies with the screen locked
I know this sounds like a weird thing to want, but some Movies and TV Shows are perfectly suitable for listening to without the picture (e.g. musicals, comedies, chat shows).
Prior to 4.2, even though locking the screen stops a Movie or TV Show from playing, you could resume it by double-clicking the home button and then pressing play. This would leave the screen locked, but play just the soundtrack of the Movie or TV Show you had been watching.
Now, with the 4.2 update, this is broken - and not just in a "feature removed" kind of way. If I try and resume a Move or TV Show as I did before, I get the play button, and clicking on it appears to start for a fraction of a second, before the screen abruptly switches back to the locked screen background.
This is extremely disappointing, but I just wanted to check here first to see if it's just my phone doing this, or whether it really is a bug.Answered in http://discussions.apple.com/thread.jspa?messageID=12732692
-
Ipad Update loses horizontal / Vertical lock switch. Now it's a mute switch
OK, this is a big one.
The little switch on the side of the iPad, that normally allows users to lock orientation, now functions as a mute switch.
This is a terrible flaw, and should be corrected.Add me to the list of people who are dismayed and confused by this change. I listen to music perhaps 2% of the time on my iPad. Maybe 85% of my time on it is spent reading text, usually while sitting or lying down. I change positions frequently. I use the lock switch *all the time*, and use it with the hand holding the iPad, to boot. Now I can no longer do this; I have to go through a complex iteration on screen, requiring much more of a break in my attention flow (I have to actually stop reading the book I'm reading, go to another interface, perform a multi-step task, come back).
My question is this - why on earth wouldn't you at least give us the option of setting the behavior back the way we're familiar with in software somewhere, even if you defaulted to the new behavior to make sure we're aware of the possibilities? Please. Please please please. Give me my hardware screenlock back. It's making reading in bed really annoying.
Maybe you are looking for
-
Itunes wont download onto windows, error message
my itunes wouldnt recognise any ipod/iphone i plugged in, so i deleted the version of itunes i had and tried to download the latest version. this wouldnt work it would get half way through installing and a message pops up saying it cant download. any
-
11gR2- webutil upload file to AS on two nodes RAC?
Hellow experts plz help with the following issue, we are using 11gR2 forms on two node rac,webutil configured on both nodes. upload/download files to AS folder(UP_FILES) using our forms. node 2 is actually replica of node 1(forms,reports,UP_FILES). w
-
I set up my watch today and Siri would not open (with the crown or "hey Siri"). A quick search showed folks on MacRumors with the same problem, but they seemed to fix it with a hard reset, and/or unpairing. I Have done both of those things (actually
-
Group by using partition getting error
select code, code_value_text ext_contact_organization, regulatory_group_name, sum(spd.case_id) over (partition by code,code_value_text,regulatory_group_name) from AERSP.code_list_dtls cdl, AERSP.ec_contact_log cntct, AERSP.de_suspect_drugs spd where
-
I was sure that something would be posted here on writing action script to make a flash banner loop only 3 times since this is a fairly common standard for web banner advertising. I've been unable to find this help or to make it work on my own. My fl