Screen locked in position

After installing new cartridges and scaning in aliginment page new printer locked on screen that says replace cartridge and will screen will not move. Unit will not print or anything.

Hi @cedar24,  and welcome to the HP Forums!
I understand your printer is stuck in an error state prompting you to replace a cartridge. Have you tried a hard reset? To do so, leave the printer on and unplug the power cable for 1 minute. While it is unplugged, hold down the power button on the printer for 10-15 seconds to release any built up power, then after the minute has passed, plug the printer back in.
If this does not resolve the issue, please remove all of the cartridges, unplug the printer, then reinstall them all after you plug it back in again. Please let me know if one if these 2 possible solutions resolves the issue. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • Help ! To Lock  The Position Of a JFrame ?!!

    hi..
    How can i lock the Position of a JFrme..
    my requirement is to lock the position of a JFrame.. so that it cannot be dragged on a screen.. but must be resizable... is that possible ?
    any suggestions ??
    Thanking You in advance...
    _rG.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    well sorry..
    i guess you are speaking with respect to windows ..
    well i left out to tell ya..
    i'm working on a macintosh..
    so i need the requirement as per the client to lock its position but not the size...
    the desktop on a macintosh can be viewed else with short keys..
    any help ?!!
    _rG.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Screen lock after updating to 8.2 (12D508) on iPad 2

    Hi,
    I have just updated my iPad 2 with 8.2 (12D508) and the screen is now locked in the portrait position. I have tried some work arounds e.g holding down both the on/off button and the Home button, toggling the screen lock on and off but to no avail. I have not had this problem with previous updates.
    Any suggestions?
    Many thanks

    Hey crutchy,
    The article linked below details a number of steps that can help resolve issues with your iPad failing to rotate as expected.
    If the screen doesn't rotate on your iPhone, iPad, or iPod touch
    https://support.apple.com/en-us/HT204547
    Cheers,
    Allen

  • IPad 2 Screen locked

    Ever since I installed iOS 6 on my iPad 2 the screen is locked in the landscape position. I have the screen lock off and have tried chnging the settings to the slide switch and reset the iPad both with no luck. Anyone elese having this problem?

    Simply because I have seen many other users insist that the screen rotation was not locked - only to discover that it really was locked - make sure by .....
    If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
    Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
    You stated that you tried this already .... but just in case .... If the screen is unlocked but still will not rotate, reset the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

  • Mute button v.s. screen lock

    The screen lock button on the side was changed to mute button after upgrade the system to iOS4.
    But I want to have screen lock button and I found the mute function is useless.
    Who can tell me how to change it back to stop screen spinning?
    thanks.

    chunling wrote:
    Who can tell me how to change it back to stop screen spinning?
    You can't change it back, but you can 'stop screen spinning' by using the re-positioned screen orientation lock.
    Double tap the home button, swipe to the right, and there you will see it on the left hand side.

  • Locking Application Position

    Is there a way to lock the position of your applications, ie an application? When my son plays with the phone he sometimes holds the icon long enough to wiggle/move/delete them accidentally.
    Thanks for the help/suggestions.
    Tom

    No way to lock icon positions, but you can reset the home screen layout in the settings under General > Reset > Reset Home Screen Layout. This will arrange all Apple icons to their factory default positions, and apps will be ordered in alphabetical order.

  • Ipod Touch shows two dates and times on the sleep screen/locked screen

    First off i have the new ipod touch and i got it this christmas.since a couple weeks ago on the sleep screen/locked screen(the screen that appears when you hit the button on top of ipod) it shows the current date and time but in the background of that time it also sais 7:12 January 6 2010. It has said that for about two weeks. Also i noticed that when you slide the unlock bar over you can still see the slider in the background at the original position. One last thing has been happening with the volume when listening to music. When i try to turn it up i slide the volume button to the right to make it louder and when i let got it just slides back and does not get louder. What is going on.

    I had the same problem with double image of date and time and also the unlock arrow. I found out that the problem was that I had, without knowing it, taken a snapshot of my wallpaper screen and saved it back to my saved photos. When I used that wallpaper image again, there was the dual image of time and date. All I had to do was change wallpaper! Good luck!

  • When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, then when I unlock the phone it automatically redials the failed call,

    When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution

    I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.

  • Is there a way to permanently locke a position? No unlocking possible?

    I have created a template in InDesign which our company uses to create "Job Sheets" for Architectural projects that we have completed.
    At times, there are multiple people who use these templates.
    To ensure that our Job Sheets are consistent, we like to lock certain image frames and text boxes.
    It is very important that these objects not be moved because we create many Job Sheets and they all must be consistant.
    We want the user to be able to change photos and text, but not the position and size of the text boxes and image frames.
    I know that we can lock the position of these objects, but anyone can just as easily unlock them.
    We want them to be locked either permanently, or to be locked with a password.
    I don't think this is possible based on the research I have done.
    But, can someone suggest an alternative that will accomplish the same thing?

    Anyone who can’t follow simple directions such as “don’t unlock that frame position” needs to be better trained or fired.
    IOW, what you want to do can’t be done.
    Bob

  • WiFi issue: Is it possible to change WiFi settings in a way that it does not switch off in the screen-lock mode?

    I have iPhone 4 and 4s. WiFi is automatically switching off on both phones when they are inactive (screens are locked). It is connecting back after some seconds I unlocke the phone. But because I have no subscribtion for the Cellular data usage, I am being cuted from Internet all screen-locked period. All that time people are not able to reach me by email, skype, or other programs using Internet. It is quite uncomfortable, especially when waiting for something important!  Is there a way to change this setting?

    The iPhone does not shut down WiFi completely when asleep. It does use a power conservation mode. You should still receive notifications. There is no setting for this. It should work for you as it does for me if you don't have a network problem.
    There are lots of problems reported with D-Link routers and they don't have a great reputation. If there is no help available from D-Link you may want to consider installing the DD-WRT firmware. It's available for the D-Link 615. See here for information: http://www.dd-wrt.com/site/index
    By the way, you do have Notifications enabled for the Apps you are talking about right? See Settings -> Notifications and Mail, etc.

  • IPod Nano Screen Lock bug

    I think I have discovered a bug in the iPod Nano software. I'm using the latest software available as for today.
    I lock the iPod Nano's screen and as expected, the graphical display of a combination lock appears. I insert the iPod Nano on to the Universal Dock and then proceed to control the Nano from the Apple Remote. It works partly. I am able to pause and play music and after a song finishes, it goes to the next one. I am not, however, able to fast forward, rewind, or skip tracks. I am able to play and pause, plus the Nano goes to the next track automatically after it finishes play the current one.
    Seems to me a bug! I would imagine that the screen lock is supposed to lock all kinds of control to the iPod except entering password.

    connect it to itunes and it will unlock

  • TS4006 I lost my iPad! I initially set up a screen lock in iCloud but now my iPad is no longer in the list.

    I lost my iPad! I initially set up a screen lock in iCloud, only to find out that I would then not be able to find my device. I then removed my device from the list in iCloud. Now, after clicking on "find my iPhone", it does not appear in the list. How do I get it back in my list of devices? The fact that it was originally in the list, does it mean that I did activate "find my iPhone"?

    you did activate find my iPhone but because you removed it from the devices list, you cant do anything further.  You need the device to add it back to the list.
    -Brenden

  • Windows 8.1 Lock Screen drops network connectivity when screen locked using Win+L

    Hi!
    I was sent here from Microsoft Community forum. The question is:
    Since Windows NT 4.0 I'm using Lock Screen to prevent people from accessing my computer when I'm leaving my room. First I was using CTRL+ALT+DEL / Lock Screen, then switched to Win+L keyboard shortcut when it was first introduced.
    Everything was fine until I switched to Windows 8.1 computer (Sony Vaio Duo 13 with Broadcom wireless network controller). This machine is 8.1, not 8.0 upgraded to 8.1.
    My problem is that when I hit Win+L combo the Lock Screen (with clock etc.) is displayed. Then, despite I have configured not to turn off display, the screen goes blank (after 30 seconds since lock) and network connectivity is cut off from desktop
    apps (I suspect the system goes into Active Standby mode, because Modern UI apps like Tune-In radio keep working fine).
    100% repeatable scenarios:
    ## Scenario 1 ##
    1) Log in
    2) Open desktop app that uses network connectivity. Outlook 2013 from Office365 subscription
    3) Check that it has connected
    4) Lock screen (Win+L)
    5) Wait for 30 seconds (first incorrectly posted as few minutes) as screen goes black
    6) Unlock screen (using password)
    7) In right corner of Outlook app you will see "Unable to connect with Exchange server" and few seconds later it will reconnect sucessfuly
    ## Scenario 2 - the more annoying ##
    1) Log in to Win 8.1 computer
    2) Connect to it using SMB (in my case I wanted to transfer 30 GB of files from local hard drive C: to server) \\COMPUTER-NAME\c$ from Windows Server 2012 R2
    3) Start copying files from computer to server
    4) Lock the screen on computer
    5) As soon as screen goes black server displays message "Lost connection to the resource. Try again?"
    6) Unlock screen on the computer
    7) Click "Try again" and it will continue copying files
    My power settings are set to go into stand by after 5 hours and if I not lock the screen it doesn't go to sleep before 5 hours.
    When I lock the screen using Win+L it goes into (probably Active) Standby mode.
    Is there any way to prevent it from going to Active Standby when locking screen? I need the screen lock for security reasons but I don't want it to drop my network connectivity on remote desktops, file transfers and other desktop activities before 5 hour
    timeout.
    This issue is not related to more or less known wireless network connectivity problem that happens to many Intel Haswell computers. Mine doesn't exhibit those problems. I can easly push 100 - 200 GB of wireless data without network drops.
    Computer information:
    Sony Vaio Duo 13: SVD1322C5E
    Intel Core i5-4200U
    8 GB RAM
    Windows 8.1 Pro 64-bit
    Broadcom 802.11n SDIO network adapter
    Originally posted at: http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/windows-81-lock-screen-drops-network-connectivity/099f16bd-b00d-4ba9-b833-48bf1d55ffe4
    Best regards,
    Sergiusz

    Same issue here using Surface 3 Pro with either internal WLAN or MS USB LAN Adapter. I'm frequently used to keep open connections over SSH to some servers. On switching to lock screen explicitly by pressing Win+L or implicitly due to idle timeout all
    connections to servers are lost. In addition, I don't get any notifications on incoming Skype messages (using Skype for desktop) when lock screen is active.
    Neither NIC is showing "Power Management Tab" according to step 5 of instructions above.
    Additionally observing USB LAN NIC seems to be kept active after activating lock screen, but traffic stops (according to its flashing light) when lock screen is switching off display. Blanking display doesn't seem to be adjustable in System Settings (Energy
    Options accessed through Win+X).
    Find attached log file of powercfg -energy -duration 300 ...
    Log file is in German. It basically claims unset timeouts for deactivating display while running attached to power supply though lock screen is turning off displays within 1-2 minutes.
    Energieeffizienzdiagnose-Bericht
    Computername
    KRITIAS
    Überprüfungszeit
    2015-01-10T15:07:47Z
    Überprüfungsdauer
    353 Sekunden
    Systemhersteller
    Microsoft Corporation
    Systemproduktname
    Surface Pro 3
    BIOS-Datum
    10/16/2014
    BIOS-Version
    3.11.0350
    Betriebssystembuild
    9600
    Plattformrolle
    PlatformRoleSlate
    Netzbetrieb
    true
    Prozessanzahl
    67
    Threadanzahl
    1319
    Berichts-GUID
    {1a168801-c189-46fe-811c-235e6bf2bd0d}
    Analyseergebnisse
    Fehler
    Energierichtlinie:Verdunkelungszeitlimit ist deaktiviert (Netzbetrieb)
    Der Bildschirm ist nicht so konfiguriert, dass er nach einer Zeit der Inaktivität verdunkelt wird.
    Energierichtlinie:Standbyzeitlimit ist deaktiviert (Netzbetrieb)
    Der Computer ist nicht so konfiguriert, dass nach einer Zeit der Inaktivität automatisch der Wechsel in den Standbymodus erfolgt.
    CPU-Auslastung:Prozessorauslastung ist hoch
    Die durchschnittliche Prozessorauslastung während der Ablaufverfolgung war sehr hoch. Das System verbraucht weniger Energie, wenn die durchschnittliche Prozessorauslastung sehr niedrig ist. Überprüfen Sie die Prozessorauslastung für einzelne Prozesse,
    um festzustellen, welche Anwendungen und Dienste den größten Anteil an der Gesamtprozessorauslastung haben.
    Durchschnittliche Auslastung (%)
    45.31
    Warnungen
    Plattform-Zeitgeberauflösung:Plattform-Zeitgeberauflösung
    Die standardmäßige Plattform-Zeitgeberauflösung beträgt 15,6 ms (15625000 ns) und sollte immer dann verwendet werden, wenn sich das System im Leerlauf befindet. Wenn die Zeitgeberauflösung erhöht wird, sind die Technologien zur Prozessorenergieverwaltung
    möglicherweise nicht wirksam. Die erhöhte Zeitgeberauflösung kann auf eine Multimediawiedergabe oder Grafikanimationen zurückzuführen sein.
    Aktuelle Zeitgeberauflösung (100-ns-Einheiten)
    10007
    Maximale Zeitgeberperiode (100-ns-Einheiten)
    156250
    Plattform-Zeitgeberauflösung:Ausstehende Zeitgeberanforderung
    Von einem Programm oder Dienst wurde eine Zeitgeberauflösung angefordert, die kleiner als die maximale Zeitgeberauflösung der Plattform ist.
    Angeforderter Zeitraum
    10000
    ID des anfordernden Prozesses
    3476
    Pfad des anfordernden Prozesses
    \Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
    Energierichtlinie:Bildschirmzeitlimit ist lang (Netzbetrieb)
    Der Bildschirm ist so konfiguriert, dass er nach mehr als 10 Minuten Inaktivität ausgeschaltet wird.
    Zeitlimit (Sekunden)
    900
    USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
    Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
    befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
    Gerätename
    USB-Verbundgerät
    Hostcontroller-ID
    PCI\VEN_8086&DEV_9C31
    Hostcontrollerspeicherort
    PCI bus 0, device 20, function 0
    Geräte-ID
    USB\VID_05AC&PID_0250
    Portpfad
    1,2
    Standbydauer (%)
    14
    USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
    Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
    befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
    Gerätename
    Surface Ethernet Adapter
    Hostcontroller-ID
    PCI\VEN_8086&DEV_9C31
    Hostcontrollerspeicherort
    PCI bus 0, device 20, function 0
    Geräte-ID
    USB\VID_045E&PID_07AB
    Portpfad
    1,1
    Standbydauer (%)
    5
    USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
    Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
    befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
    Gerätename
    Generischer USB-Hub
    Hostcontroller-ID
    PCI\VEN_8086&DEV_9C31
    Hostcontrollerspeicherort
    PCI bus 0, device 20, function 0
    Geräte-ID
    USB\VID_05AC&PID_1006
    Portpfad
    1
    Standbydauer (%)
    5
    USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
    Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
    befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
    Gerätename
    USB-Eingabegerät
    Hostcontroller-ID
    PCI\VEN_8086&DEV_9C31
    Hostcontrollerspeicherort
    PCI bus 0, device 20, function 0
    Geräte-ID
    USB\VID_045E&PID_0797
    Portpfad
    1,3
    Standbydauer (%)
    14
    CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
    Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
    Prozessname
    firefox.exe
    PID
    5968
    Durchschnittliche Auslastung (%)
    1.57
    Modul
    Durchschnittliche Modulauslastung (%)
    \Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\xul.dll
    0.60
    \Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\mozjs.dll
    0.27
    \SystemRoot\system32\ntoskrnl.exe
    0.16
    CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
    Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
    Prozessname
    System
    PID
    4
    Durchschnittliche Auslastung (%)
    0.59
    Modul
    Durchschnittliche Modulauslastung (%)
    \SystemRoot\system32\ntoskrnl.exe
    0.24
    \SystemRoot\system32\DRIVERS\igdkmd64.sys
    0.12
    \SystemRoot\system32\DRIVERS\avc3.sys
    0.07
    CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
    Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
    Prozessname
    dwm.exe
    PID
    6264
    Durchschnittliche Auslastung (%)
    0.47
    Modul
    Durchschnittliche Modulauslastung (%)
    \SystemRoot\system32\ntoskrnl.exe
    0.10
    \Device\HarddiskVolume4\Windows\System32\dwmcore.dll
    0.09
    \SystemRoot\System32\drivers\dxgkrnl.sys
    0.06
    CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
    Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
    Prozessname
    Skype.exe
    PID
    11008
    Durchschnittliche Auslastung (%)
    0.26
    Modul
    Durchschnittliche Modulauslastung (%)
    \Device\HarddiskVolume4\Program Files (x86)\Skype\Phone\Skype.exe
    0.11
    \SystemRoot\system32\ntoskrnl.exe
    0.05
    \SystemRoot\System32\win32k.sys
    0.04
    CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
    Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
    Prozessname
    svchost.exe
    PID
    1528
    Durchschnittliche Auslastung (%)
    0.25
    Modul
    Durchschnittliche Modulauslastung (%)
    \SystemRoot\system32\ntoskrnl.exe
    0.16
    \Device\HarddiskVolume4\Windows\System32\ntdll.dll
    0.02
    \SystemRoot\system32\drivers\ndis.sys
    0.01
    Informationen
    Plattform-Zeitgeberauflösung:Zeitgeberanforderungsstapel
    Der Stapel mit den Modulen, die für die niedrigste Plattform-Zeitgebereinstellung in diesem Prozess verantwortlich sind.
    Angeforderter Zeitraum
    10000
    ID des anfordernden Prozesses
    3476
    Pfad des anfordernden Prozesses
    \Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
    Aufrufender Modulstapel
    \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
    \Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
    \Device\HarddiskVolume4\Windows\SysWOW64\d3d9.dll
    \Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\CEF\libcef.dll
    \Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
    \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
    Energierichtlinie:Aktiver Energieplan
    Der derzeit verwendete Energieplan.
    Planname
    Ausbalanciert (OEM)
    Plan-GUID
    {381b4222-f694-41f0-9685-ff5bb260df2e}
    Energierichtlinie:Energieplancharakter (Akkubetrieb)
    Der Charakter des aktuellen Energieplans, wenn das System im Akkubetrieb ausgeführt wird.
    Charakter
    Ausbalanciert
    Energierichtlinie:Videoqualität (Akkubetrieb)
    Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
    Qualitätsmodus
    Videoqualität und Energieeinsparung ausbalancieren
    Energierichtlinie:Energieplancharakter (Netzbetrieb)
    Der Charakter des aktuellen Energieplans, wenn das System im Netzbetrieb ausgeführt wird.
    Charakter
    Ausbalanciert
    Energierichtlinie:802.11-Energierichtlinie für Drahtlosverbindungen ist "Maximale Leistung" (Netzbetrieb)
    Die aktuelle Energierichtlinie für 802.11-kompatible Drahtlosnetzwerkadapter ist nicht für die Verwendung von Energiesparmodi konfiguriert.
    Energierichtlinie:Videoqualität (Netzbetrieb)
    Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
    Qualitätsmodus
    Für hohe Videoqualität optimieren
    Systemverfügbarkeitsanforderungen:Erfolgreiche Analyse
    Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.
    Akku:Akkuinformationen
    Akku-ID
    1F11LGC_LGCX863568
    Hersteller
    LGC_LGC
    Seriennummer
    1F11
    Chemie
    LION
    Langfristig
    1
    Versiegelt
    0
    Zyklusanzahl
    33
    Vorgesehene Akkukapazität
    42157
    Letzte vollständige Aufladung
    44209
    Funktionen der Plattformenergieverwaltung:Unterstützte Standbystatus
    Mithilfe von Standbystatus kann der Computer nach einer Zeit der Inaktivität in einen Energiesparmodus wechseln. Der S3-Standbystatus ist der standardmäßige Standbystatus für Windows-Plattformen. Im S3-Standbystatus verbraucht der Computer nur die Energie,
    die notwendig ist, um den Arbeitsspeicherinhalt zu bewahren und die Arbeit mit dem Computer schnell fortsetzen zu können. Sehr wenige Plattformen unterstützen den S1- oder S2-Standbystatus.
    S1-Standbymodus unterstützt
    false
    S2-Standbymodus unterstützt
    false
    S3-Standbymodus unterstützt
    false
    S4-Standbymodus unterstützt
    true
    Funktionen der Plattformenergieverwaltung:Unterstützung von Verbindungsstandby
    Mit dem Verbindungsstandby kann der Computer in einen Stromsparmodus wechseln, in dem er immer eingeschaltet und verbunden ist. Der Verbindungsstandby wird soweit unterstützt anstelle der Systemstandbystatus verwendet.
    Verbindungsstandby unterstützt
    true
    Funktionen der Plattformenergieverwaltung:Die adaptive Bildschirmhelligkeit wird unterstützt.
    Dieser Computer ermöglicht die automatische Helligkeitsregelung der integrierten Anzeige durch Windows.
    Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
    Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
    Gruppieren
    0
    Index
    0
    Leerlaufstatus - Anzahl
    11
    Leerlaufstatustyp
    Micro-Energiemodul-Plug-In
    Nennfrequenz (MHz)
    2301
    Prozentuale maximale Leistung
    100
    Prozentuale niedrigste Leistung
    32
    Prozentuale niedrigste Drosselung
    3
    Leistungssteuerelementtyp
    ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
    Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
    Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
    Gruppieren
    0
    Index
    1
    Leerlaufstatus - Anzahl
    11
    Leerlaufstatustyp
    Micro-Energiemodul-Plug-In
    Nennfrequenz (MHz)
    2301
    Prozentuale maximale Leistung
    100
    Prozentuale niedrigste Leistung
    32
    Prozentuale niedrigste Drosselung
    3
    Leistungssteuerelementtyp
    ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
    Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
    Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
    Gruppieren
    0
    Index
    2
    Leerlaufstatus - Anzahl
    11
    Leerlaufstatustyp
    Micro-Energiemodul-Plug-In
    Nennfrequenz (MHz)
    2301
    Prozentuale maximale Leistung
    100
    Prozentuale niedrigste Leistung
    32
    Prozentuale niedrigste Drosselung
    3
    Leistungssteuerelementtyp
    ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
    Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
    Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
    Gruppieren
    0
    Index
    3
    Leerlaufstatus - Anzahl
    11
    Leerlaufstatustyp
    Micro-Energiemodul-Plug-In
    Nennfrequenz (MHz)
    2301
    Prozentuale maximale Leistung
    100
    Prozentuale niedrigste Leistung
    32
    Prozentuale niedrigste Drosselung
    3
    Leistungssteuerelementtyp
    ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
    Gerätetreiber:Erfolgreiche Analyse
    Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.

  • Can't remove the screen lock by PIN and can't use the screen to receive calls

    Hello, I have a brand new SONY Xperia , Model Number D5803, Android version 5.0.2. , Baseband version 8974-AAAAANAZQ-00063-42, Kernel version 8974-perf-g3f600d1. , Build number 23.2.A.1.62.
    I set a screen lock by PIN. However when I receive calls I can’t take them, because the screen in locked.
    I tried to turn off the screen lock, but when I select the “ Screen lock” menu and after entering the correct PIN, the following items are not active “None”, “Slide” and “Pattern” . So I can't select  “None”
    The only active items are “PIN” and “Password” .
    Please advice how to remove the screen lock by PIN. I hope this will help to be able to receive calls.
    Thank you

    To enable None and Swipe options, you need to go to Settings -> Security -> Clear credentials. Then those options will become active again.
    However, you should be able to take calls even when you have PIN security, can you describe what shows on the screen when you have an incoming call while screen is locked?
    A proud Sony User since 2002
    If I was helpful to you, thank me by Kudos

  • How do i get my ipod 5 unlock? i cant get past the home screen lock (home screen lock is what i need unlocked) plz help

    how do i get my ipod 5 unlocked from the homescreen? plz help

    If you have a passcode to the screen lock that you've forgotten, restore the iPod from the computer to which the iPod is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the iPod into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    If that still doesn't work, as a last resort try DFU mode:
    http://www.iclarified.com/entry/index.php?enid=1034
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Maybe you are looking for