SCREEN LOSING BRIGHTNESS!!!!!

hi, this june will be the one year birthday of my ibook g4 12" i have never had a single problem with the laptop but recently i noticed the screen has gotten a bit dimmer. i can still see everything on the screen but its no longer the vibrant bright screen it was. i wish it was because my computer was old but i havent even had it for a year yet !! does anyone have any suggestions on how to brighten up my screen (and yes brightness is all the way up) thanks a lot.

Since most Apple resellers will forward your portable computer to Apple,
you may as well go into one that is nearest where you live and let them
check with Apple online about your warranty coverage; and take it in.
Proof of your coverage should be in the main Support computers, but
if you have a dated proof of purchase for your computer, it may be nice
to also have that on hand if you carry in your machine for service.
You'd be charged to call in after the initial 90-day phone support, unless
you got the AppleCare extended Protection Plan; which would also (from
new) add up to three years Service -repairs- and phone support. Support
can help also in cases where a new user has an issue with software; but
the Service portion on the original one-year complementary coverage is
the repair portion you need to fix this; before it expires.
If you do get the AppleCare Protection Plan extended coverage plan, it
would be handy in the future and it can be transferred to another owner.
Also, should this problem as you see it, not be viewed in the same sense
of urgency by some tech advisor, with this extended policy in effect, the
issue would have a case number and should it get worse or fail, the item
would be in their system ahead of the actual event. That can be helpful.
Nearly any Apple reseller should have the AppleCare for iBook/MacBook
policy in stock; you can also order them from Apple online, or from an-
other Apple authorized reseller. Just so long as the physical item they
send you (if ordered) arrives before your purchase anniversary deadline
AND subsequent lag times before you enroll the plan directly with Apple.
If you buy it -but fail to enroll it- the policy is about worthless to your Mac.
Un-enrolled (unused) policies appear sometimes in dubious places for
sale; I'd avoid eBay resale Apple plans because you may get nothing. A
company called LA Computer seemed to offer the AppleCare plan for a
time, at a discount; not a great sale, but a little off to encourage one to
buy hardware and other things from them. The policy is about $250; and
that is a bargain against the price of a logic board. It is a good accessory.

Similar Messages

  • Screen losing brightness and color fading

    I have a 4 yr old Powerbook G-4 and the past two weeks have notices the brightness of the screen is fading as well as the images (screen saver). It is beginning to be difficult to see the files I have on my desk top. Will an adjustment help - what might that be? or do I have a much bigger problem?
    Thanks,
    Captain Krunch

    regarding bsteely's comment...
    don't use a screensaver???
    i have the middle macbook c2d...bought dec. 2006. i guess i have an lcd screen....so you're saying i shouldn't use a screensaver?? i have it set to run for 30 mins or 1 hr then sleep. it's of all my pictures...i really like it.
    i was taught to ALWAYS use a screensaver to prevent the screen from burning out.
    so what would you suggest as an alternative?
    what does anyone else think??
    --car

  • Screen losing brightness / spontaneous shutdowns

    2 Problems:
    1.) My iMac G3 400 / slot-loader / OS 9.1 has had recent startup problems; i.e., occasionally shuts down spontaneously shortly after initial startup, or sometimes after several minutes, or longer use.
    2.) The monitor has become darker. I brightened it a bit via the Monitor Control Panel, but it is still too dark.
    Any help will be greatly appreciated. Thanks.
    iMac G3 SE 400 mhz   Mac OS 9.1.x   384 RAM 16 GB HD DSL Modem

    I'm no expert, but experienced the same issue. I believe that the iMac is not retaining enough charge for the monitor (26,000 volts for minimum brightness), which is why a) it's so dim, and 2) other parts (hard drive, etc.) pull so much power during startup that it kills the machine.
    This is what I did to rescue my iMac while I look for another machine (you should try all software methods [permissions, pram, system disk, etc.] before you do this):
    1. UNPLUG.
    2. open the memory door. Reach in and disconnect the CD drive (you may need to take out the memory cards for better access). It's a little snug in there -- you may need to get out some needle-nose pliers. The plug is the SMALLER (and outmost) of the two black boxes leading into the cd drive. The other one is soldered onto the cd drive itself, and -- ahem -- shouldn't be yanked out.
    3. re-insert your memory cards if needed
    4. Plug back in.
    5. Try powering up. (zapping PRAM might be a good idea at this time, too)
    6. Let it sit with its "?" (hey, where's the system?) icon for a while -- I believe this builds a charge large enough to :
    7. Unplug, reconnect the CD drive, and power up.
    If you have sucess, NEVER shut down (sleep was okay for me) unless you want to go through this process again. It seems the capacitor isn't holding charge on power down, or that the trickle charge isn't trickling well. It could also be that the charge is TOO large, but I doubt that.
    Anyway, that is what worked for me. I'm typing from said iMac right now, and looking for a new one right now before it gets really scary...
    iMac G3 500Mhz   Mac OS X (10.3.9)  

  • My monitor seems to be losing brightness.

    My iMac monitor seems to be losing brightness on the left half of the screen. Is the monitor going out? I've only had it a year...and where can I get it fixed?

    I concur with LousyFool, it sounds like a bad backlight and the display need to be service or replaced.
    Check out the following threads.
    One side of display is darker than the...: Apple Support Communities
    My display screen appears darker on the...: Apple Support Communities
    2009 iMac 27 left side display is dim: Apple Support Communities

  • Screen turns bright yellow & green curser turns into a large yellow square.

    When I play any type of 3d game, such as world of warcraft my screen turns bright yellow and green. The mouse cursor turns into a large yellow square. Then it will make squiggly patterns across the screen in these colors, Almost like a argyle pattern. The only way to fix this is force quit the program (or if I can see the game still) I have to make it non-full screen. Iam thinking it might be a video card error, but iam not sure. Anyone experience this before?
    Steve.
    Imac   Mac OS X (10.4.6)   First gen Imac with intel chip 20 inch. 128 vid card.

    Are you running your monitor at its native resolution? If changing the resolution of the game solves the problem as I take it from your sentence quoted here:
    "The only way to fix this is force quit the program (or if I can see the game still) I have to make it non-full screen"
    Then you probably should try changing the resolution of the screen before playing the game. Most games will do this automatically but if the ones you are playing do not then you may need to search for updates to them. Very few games are designed to run in wide screen mode, but generally in more traditional resolutions such as 640 x 480 or some other resolution with the same relationship between width and height.
    This is my best guess anyway. Hope you get the problem solved.

  • Is The 24" iMac Screen Too Bright For Longevity ?

    I have just been in an Apple Store testing both the 20" and 24".
    I had heard that the 24" screen was brighter but assumed that, like so many claims, it would only be a marginal difference.
    I was amazed to see that it was considerably brighter, making the 20" look extremely dull by comparison.
    I checked and found that both machines were on maximum brightness. Even set to minimum, the 24" seemed brighter.
    I don't know about LCDs but with "normal" electric bulbs, over-running them can give a brilliant but brief life.
    Are these new monitors naturally bright or are they being over-run and likely to burn out just after the warranty expires?
    Ian.

    I realise we are dealing with a different technology.
    Does that mean that the brightness will have no detrimental effect on longevity?
    Ian.

  • My screen reduces brightness while using apple tv, any suggestions?

    My screen reduces brightness while using my apple tv - any suggestions?

    Does it just look darker all the time or does the brightness change over time?
    If it just looks darker, check Settings>Video and if set to RGB Low try RGB High or YCrCb.
    I was watching a digital copy of final Harry Potter last night that came bundled with the Blu Ray - could not believe how dark the film was - I used to routinely use RGB Low on AppleTV1, and such settings options have only just appeared on AppleTV2.  I could see hardly any shadow detail on RGB Low, much improved on RGB High.
    AC

  • Make screen (physically) brighter

    hi, i have noticed that my toshiba satellite (2007) screen is very dim compared to say an apple compouter or macbook.. i have already increased brightness all the way through the settings, and increased brightness & gamma through the chip settings, but it's still maybe only half as bright as other laptops i see
    is there any way to physically increase brightness, through the power/hardware? for example, switching the resistor.. or some kind of power booster for the particular circuit that controls the screen's brightness?
    thanks!

    Nope. Not without costing more than a replacement laptop would cost.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • GP70 screen too bright

    Hi, I just bought a GP70 2PE with Core i7 and so far I quite like it. I installed Windows 7 x64 instead of the default Windows 8.
    However, I have one problem with it - the screen is very bright - even on the lowest setting, the screen is brighter than my old laptop (a 9 year old Acer 5020) on the highest setting. While a bright screen will be great for outdoors use (or in other brightly lit places), using the laptop in a dark place hurts my eyes (while the old laptop and the CRT monitor of my main PC do not).
    Opening the graphics control panel and setting brightness.contrast to minimum helps a bit but makes the image look bad. Is thee a way to reduce the backlight brightness (without opening the laptop and modding the backlight circuit, which I could do, but do not want to lose the warranty)?

    I would like to thank Lenn and Dennis for your suggestions, all of which I have now tried. I've taken so long to respond because I wanted to wait 24 hours - and another night - to see if one is better than another. Changing the screen profile made a very small difference, and at first Brightness seemed to do a better job, but the overall winner in terms of flexibility is undoubtedly Shades, which I'm using right now.
    Thanks again, both of you!
    Uxenden

  • Shortcut "Z" not working, screen  momentary brighter

    Hello,
    i have a Macbook Pro Retina with hopefully the latest Garage Band (10 or 11?).
    Anyway I have a problem with the keyboard shortcuts. For example if I press "Z"
    to jump to the beginning of the tracks nothing happens but the screen gets brighter
    for a short time..
    I have noticed this behavior on several shortcuts.
    Anybody an idea what's the problem?
    THX and best regards, Hubert

    Hubert,
    to see your GarageBand version, use the menu command "GarageBand > About GarageBand".
    If it is showing Version 10.0.2, you are indeed having the newest GarageBand version.
    Then hit the "return" key to go to the beginning of a track.
    The list of keyboard shortcuts is here:
    http://help.apple.com/garageband/mac/10.0/#gbnd715f33a0
    Many shortcuts from the older GarageBand '11 no longer work, and not all keys are documented.
    -- Léonie
    For example if I press "Z"
    to jump to the beginning of the tracks nothing happens but the screen gets brighter
    for a short time..
    Added - the blinking, brighter screen is the error message for an undefined keyboard shortcut.

  • I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

    I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

    This has worked for some others.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201210 Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle o

    Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • Since upgrading to Lion the screen auto brightness adjusting icon comes on allmost all the time even though i've switched it of in preferences?? it's so annoying..any ideas??

    Since upgrading to Lion the screen auto brightness adjusting icon comes on allmost all the time even though i've switched it of in preferences?? it's so annoying..any ideas??

    I don't know exactly what the issue is, but I think I do. Are you talking about what happens when you start up your MBP, full brightness, with power cable in - and when you're using battery only, the brightness dims? If so, this is a feature designed to make sure your monitor is bright enough while using batteries - but not so bright as to cause an undue drain on power.
    I don't know about a cure to this issue, if indeed this is what you're talking about.

  • My iMac screen goes bright and dim randomly, any idea why?

    my iMac screen goes bright and dim randomly, any idea why?

    Sounds like a power issue.
    Try Resetting the System Management Controller (SMC)

  • Ipod touch 4g screen gets brighter and darker and it just does randomly

    screen gets brighter and darker randomly

    Go to Settings>General Wallpaper and Brightness and turn off Auto Brightness.
    Next:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              

Maybe you are looking for

  • Question about touch handling

    Hi, I have a view that is handling touches. I have a tabbar in the same view. I can determine when touch is made in the area where there is a tabbar . The problem is that I want the events inside the tabbar area to be handled by tabbar did select met

  • Issue with Axiom 25 and Logic 9/9.01

    New user here of Logic 9 and now Logic 9.01. Yesterday I received the M-Audio Axiom 25. I've noticed on certain plug-in patches I'm getting static (or sounds like digital distortion) with Massive, Mtron etc...Some of the patches are fine but a number

  • Downloading purchased iTunes after computer was stolen

    I purchased a couple hundred dollars worth of songs onto my old laptop and backed them up as MP3s on CDs. My laptop was stolen, and I since closed that credit card account that I purchased the iTunes on. I tried uploading the saved MP3s onto another

  • EDI 820 Mapping

    Hi Guys, Customer send send sall the payments to Locbox. The bank send EDI 820 file Can you please send a sample mapping document for EDI 820 format to PEXR2002 idoc to Lockbox. My email [email protected]

  • Are optional (non-existing) elements ALWAYS copied to target in TransformXS

    Assume I use the TransformXSL activity to copy a structure from source XSD to target XSD. Some of the elements are specified as optional. Say for a particular situation some of these optional elements in the source XML do NOT exist. It seems to me th