Screen Modifications Recruitment Module

Dear All,
I wanted to make screen modifications for Intial entry of basic data's initial screen and even organisational assignment and other recruitment infotypes. But unable to find any pertaining to them. Can any one suggest me on this...
Regards,
Rajasekar

Hi,
Check feature MASSN via PE03: Determining the Fast Entry Dialog Module.
And check the return value in table TDCT, you will find the screen and program call by PB40 Initial Entry of Applicant Data.
And you can create your own dialog module to adjust the initial screen or change the exist one.
Hope helps,
Chen Jian

Similar Messages

Re:Screen Modifications

Hai Experts,
we are doing screen modifications for infotypes that we can use through PA30,
i want to know whether its possible to make screen modifications while performing actions(pa40),
if possible what is the procedure.
Regards,
Chiran Reddy.

Hai Navneet,
Thank you for your reply,i want to know that if we perform any screen modifications througgh module pool program,its impact will be both on pa30 and pa40 also.
my requirement is that in an infotype
some fields will be active while hiring
same fields will be inactive while promotion
same fields will be hidden while transfer.
for the above process,is there any solution.
Regards,
Chiran Reddy.
Edited by: chiran reddy on May 9, 2008 6:14 AM

Module Pool MP000200_CE in Screen Modifications

Hello,
My query is regarding screen modifications table T588M. When the module pool MP000200_CE is used? I know it is used when the Concurrent Employment is active and we have activated Concurrent Employement in our system but when I go to the system - status in IT0002 and check the screen number, it shows MP000200 and not MP000200_CE.
How to activate the screen MP000200_CE for IT0002?
Thanks.

For the infotype 0002 for the modulepool MP000200_CE, only screens
2007 and 2010 are needed. concerning the infotype 0002: the corresponding modulepool (MP000200 or MP000200_CE) will be read according to the country and the table T582ITD. If no entry exists for this country then the modulepool MP000200 will be used for the infotype 0002.

Error in Recruitment module

Hi SAP Gurus:
My query here is that in the recruitment module, while doing prepare to hiring action, we face an error calle MESSAGE_TYPE_X
when we exit and do the action again, we do not get it.
did debug it and found out the following reason:
I had a look at your system and was able to simulate the problem you
mentioned. The reason what I could find out is the following.
In your configuration of the view V_T751E, for the action type
'04'(Offer applicant contract) an infogroup 'W4' is attached. Through
this infogroup 'W4', an insert(INS) is done to the infotype 4002
(V_T588D). This configuration means that when we execute the action type'04', the infogroup 'W4' will also get executed which would bring up
the screen 'Change Vacancy Assignment Status' using which we can change
the status to '5'.
Now, SAP provides a dynamic action in standard which would update the
vacancy assignment status. Please see the calling of the form routine
SUBMIT_RPAPUT00_WITH_APPLICANT in the view V_T588Z. Here in this form
routine, we update the vacancy assignment status to 5, when we execute
the action '04'. So the updation of the status is already done. After
this only the infogroup 'W4' is processed which will try to update the
status again to '5'. This leads to some buffering issue in the system
and as a result of this it is trying to insert the same record again.
Hence the update of the database fails and the system dumps. So
basically the dynamic action in T588Z as well as the infogroup 'W4' are
doing the same thing. Both are updating the vacancy assignment status.
So I would suggest you to kindly use either one of these since
ultimately both of them are doing the same action. So either you can
remove the infogroup assignment to the action '04' in V_T751E or you cancomment out the calling of the form routine -
SUBMIT_RPAPUT00_WITH_APPLICANT in the dynamic action which SAP provides
in the standard.
Even after correcting this, i am facing with the same problem.
please advise,
Ayyaps

MASSN Determining the Fast Entry Dialog Module
Object
    Feature
Use
    Transaction
Procedure
    You select an action for fast entry in the entry screen of transaction
    PA42.
    The return value of the feature is a dialog module taken from table DCT.

Screen Modification Problem ...

While i am Working on Screen Modification i set Field ABKRS as Out Put Field in IT001 .But Now Client asking just we need that field Out Put Field as one Emp Group remaing as required Field,
How Should i do.Is it possiable through IVWID Feature?

Hi, you can make the field ABKRS required field for one EE sub group by modifying feature (PE03) P0001 some thing like below and then make corresponding entries in V_t588m.
On feature, MOLGA> EE subgroup> give your EE sub group with a return value like 10A and then OTHERWISE as return value like 10. Then you make entries in V_t588m table with corresponding return value in feature as variable values in T588M and field selection as RF or out put field only.
To create entriy in T588M, do as below:
Goto SM30> V_T588M
Click on Maintain.
Module pool name as MP000100
Feature P0001 and give appropriate alternative screen .....say 2000
Create two entries in this view with variable you created above in feature P0001 (return value) and set proper selection RF or out put.
Regards,
Alen

I'M modifing std module pool for sales order plz can any one help me

hi
i'M modifing std module pool for sales order plz can any one help me
i'm introucing some fileds in sales order header level additional data2 screen
i want it for only to doc conditio i shld i proceed

can anyone help me

Recruitment module

Hi Friends,
I am working on recruitment module. I am stuck in the initial data entry screen In PB10.
When I try to create an initial data entry screen the first screen gets saved but the next screen create applicant activities throughs an error message " No infotype found , maintain infogroup modifier/usergroup".
But i understand in Recruitment The IGMOD Feature is not to be maintained.
Again when I press enter two times It gives an another message "No application assigned to this applicant no."
But I have included thses infotype IT4000, 4001, 4002 and 4005 in the infomenu during configuration in applicant actons.
what is that I have missed?where?
Request for an early responce.
Thanks!
Sunita

Hi,
Check the user group of the infomenu and might need to correct your user group. You can check your user group by using transaction SU3 and clicking on Parameters tab and then check the parameter id UGR.
Thanks

Screen Modifications for Travel Privileges (0017) screen

Hi all,
I am trying to change the screen modifications for Travel Privileges with module pool MP001700. The problem is I can't find the module pool through the IMG>Personnel Management>Personnel Administration>Customization User Interfaces>Change Screen Modifications. If not here, where/how can I do this?
Your help is much appreciated.
Thanks.
Regards,
Eric

Hi guys,
Thanks for the replies but I was looking to do screen modifications preferably by non ABAP methods. I have found the solution where you need to create the module pool manually and the fields selections will appear.
Regards,
Eric

Screen Modifications

hi,
for any global implementtion prj, if i wanted to have different fields in the infotypes, how to do this using screen modifications? and also what is the purpose of variable key in Change view " Infotype Screen Control"
for ex for US in IT0001, i wanted to hide Contract Field, for other country i wanted to dispay that field in IT0001.
Thanks

Hi Novice,
When you press F1 in any field you will get technical information.by pressing F9 or clicking the technical information icon.
Gather the information on program name and screen number. Table name and field name.
In IMG under personnel management -> personnel administrationt-> ustoming User interfaces->Change Modifications ->
Select your module pool Screen and Feature that is Table like IN case of infotype 0002 it is P0002 and select details
You will find radio button to hide the fields.
Warm REgards,
Kapil

Screen Modifications in VA31 - Scheduling Agreement

Dear Experts,
This is regarding screen modification.where our requirement is to add two fields in VA31.
In VA31 , as soon as we creates Scheduling Agreement,we add material in item level in overview screen .after double clicking on line item ,system moves to the next screen where in schedule tab we enters scheduling details .after double clicking on that line item, system displays one more screen which contains schedule line data where now three tabs are there :Sales/Shipping/Procurement .
Our requirement is to add two more fields in any of this tab or add one more tab .
as i tried for screen exits ,but i am not able to find any screen exit.
Can anybody suggest me the way in order acheive above target.
with Regards,
Rajesh Chaskar

Hi Rajesh,
In SD module enhancements are generally done using User Exits.
In Program SAPMV45A the screen number 0312 can be used to add custom fields.
Then you can use the following Inlcudes in Program SAPMV45A to write your requisite code.
INCLUDE MV45AOZZ.             " User-modules PBO
INCLUDE MV45AIZZ.              " User-modules PAI
INCLUDE MV45AFZB.             " User-forms
INCLUDE MV45AFZZ.             " User-forms
You would need to get access key from SAP before going ahead with User Exits.
Hope the above information will help you in meeting your requirement..
Regards,
Abhisek.

Country specific Screen Modifications

Hi,
I have a requirement for IT0007 where the time administraors field is an optional one for Portugal and a required field for Spain.
This need to done through 'Change Screen modifications' but how to differentiate between countries.
Please suggest.
Thanks,
Tara

I have a requirement for IT0007 where the time administraors field is an optional one for Portugal and a required field for Spain.
This need to done through 'Change Screen modifications' but how to differentiate between countries.
Hi,
Step 1:
Goto PE03
P0007 feature
Add molga Portugal 19 ansd spain 04
enter the return values for the respective countries.
Step2:
Sm30-->v_T588m
select the module pool MP000700
copy the standard screen with diffrent variable keys (return values of feature P0007)
make the settings of the fields accordingly.
But i Guess Time administartor field is in 0001 infotype which you need follow the same procedure for P0001 and MP000100.
There is no time adminstrotor field in 0007.
if its is customized then you need to map z module pool in T588m and create zfeature.

Infotype 0071 - Screen Modifications

Hi SAP - gurus,
I would like to hide few fields in infotype 0071 - Pension Funds GB. I am not able to find the fields in the screen modifications table. Can you let me suggest me how I need to go about this??
Thanks in advance for your help.
Regards,
Lakshmi

Hi Dilek,
Thanks for your quick response. I am checking in Module Pool - MP007100 Variable key - 05 since we have not configured the Pension schemes as Flat, Percentage or Mixed.
Pls let me know your suggestions.
Regards,
Lakshmi

Error message in WAD: "No name is specified for modification type 'Module'"

Hi All,
We have created a WAD template with one analysis item and a button and have single module of type generic module in it.
While executing it following error message is displayed "No name is specified for modification type 'Module'"
Please Can anyone help with this error.
Regards,
Shweta.

Hello,
I am currently facing same issue and I have no idea how to get rid of this message on top of the page.
I'm pretty sure that this error message comes from the ANALYSIS_ITEM define in my Web Template but I have defined alias name for the different modules I created:
Who is able to help ?

Selection screen modification based on various buttons in selection screen

Hi,
I have 1 query related with Selection screen modification.
In my Report Program,I have created GUI Status for my selection screen
Now 2 buttons in application toolbar are coming on selection sceen.
For this i used,'At selection screen output' event.
And there are 2 blocks on selection screen.
If user press button1 then block2 should not display.
and if user press button2 then block1 should not display.
but the problem is i m not getting reqd result and also while doing debugging its not showing me sy-ucomm value.
Any pointers on this.
Thanks,
Mamta

Hi Mamta,
   have it in a group then you can write code accordingly see sample example,
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS       : p_r1 RADIOBUTTON GROUP rad
                        USER-COMMAND clk DEFAULT 'X'.            " upload Radio Button
SELECTION-SCREEN COMMENT 5(35) text-003.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : BEGIN OF BLOCK 001 WITH FRAME TITLE text-001.
PARAMETERS: p_upl       LIKE rlgrap-filename MODIF ID a           "Upload File
                         DEFAULT 'c:\temp\parbmat.xls',
            p_werks     like t001w-werks MODIF ID a,              "Plant
PARAMETERS: p_rest      LIKE rlgrap-filename MODIF ID a           "Dwonload File Path
                         DEFAULT 'c:\temp\Success.xls'.
SELECTION-SCREEN : END OF BLOCK 001.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_r2 RADIOBUTTON GROUP rad.
SELECTION-SCREEN COMMENT 5(35) text-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : BEGIN OF BLOCK 002 WITH FRAME TITLE text-002.
PARAMETERS     : p_plant LIKE marc-werks MODIF ID b.                "Plant
PARAMETERS     : p_lgort LIKE mard-lgort MODIF ID b.                "Storage Location
PARAMETERS     : p_vkorg LIKE mvke-vkorg MODIF ID b.                "Sales Organization
PARAMETERS     : p_vtweg LIKE mvke-vtweg MODIF ID b.                "Distribution Channel
SELECT-OPTIONS : s_mat FOR mara-matnr MODIF ID b.                  "Material No No
SELECT-OPTIONS : s_dat FOR mara-ersda MODIF ID b.                  "Date on Record Created
PARAMETERS     : p_down LIKE rlgrap-filename MODIF ID b
                  DEFAULT 'c:\temp\Material Master.xls'.           "Download File Path
SELECTION-SCREEN : END OF BLOCK 002.
AT SELECTION-SCREEN OUTPUT.
*Inactive Fields depending on the radio button
LOOP AT SCREEN.
    IF p_r1 = 'X'.
      IF screen-group1 = 'B'.
        screen-active = 0.
      ENDIF.
    ELSEIF p_r2 = 'X'.
      IF screen-group1 = 'A'.
        screen-active = 0.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
Edited by: suresh suresh on Jul 28, 2009 12:42 PM
Edited by: suresh suresh on Jul 28, 2009 12:42 PM

How to add new field to Screen Modifications

Hi,
I want to get P0002-CNAME in screen modifications of Infotype 02. At present i have other 23 fields for which i can set display attributes. This new field is to be added in infotype 02 and also some coding is to be put for this. How this can be achieved ?
One solution is to enhance infotype and add some Z field,but i would like to use the existing structure field.
Please let me know proper way for this.
Thanks.

Hi,
I want to get P0002-CNAME in screen modifications of Infotype 02. At present i have other 23 fields for which i can set display attributes. This new field is to be added in infotype 02 and also some coding is to be put for this. How this can be achieved ?
One solution is to enhance infotype and add some Z field,but i would like to use the existing structure field.
Please let me know proper way for this.
Thanks.

Screen Modifications Recruitment Module

Similar Messages

Maybe you are looking for