Screen no. for HERS Material type

Hi Friends,
I am trying to write a mass uploading program for HERS material type.
When I go to Purchasing view of HERS material type "Manufacturing details" subscreen is showing below (like Internal Material no. & Mfr Part no). i.e. it is showing the sequence as General data - Purchasing values - Manufacturing detailssub screens. Actually I want the sequence as Manufacturing details- Genaral data - Purchasing values.
When I check in OM3TE 12 is assigned to HERS material type. When I checked in OM3TB for screen sequence of 12 --- in Purchasing view I could see screen no. as 3002. The sub screen sequence is also correct.
But when I go to trnasaction MM02 --purchasing view the screen no. is 4000. (it is the screen no. to come for standard 12 screen sequence.
Am doing corectly ?
I want to get screen as 3002 in Purchasing view of HERS material type and sequence should be Manufacturing details- Genaral data - Purchasing values.
Regards,
Sai Krishna

Hi Sai Krishna ,
Goto OMT3B and change the Screen no of Subscreen ( Last Column ) to :
2312 -- 3rd Row
2311 -- 4th Row
2302 -- 5th Row
At first note all the numbers in last column and then change it.
Leave the others without any changes.
Regards
Ramesh Ch

Similar Messages

Uploading data in MM01 for different material types

Hi,
I have a doubt regarding uploading the data in MM01 for different material types.
Generally in MM01, we have different views for different material types. The number of views will vary depending upon the material type that we select.
I have a scenario, where in to upload the data, I have a flat file that consists of data for different message types. So, how to upload the data in such case.
Can anyone help me on the same by providing explanation or sample code...? What would be the possible ways to upload data in such scenario.
That would be of great help.
Thanks & Regards,
Pradeep.

See the below code and use FM SELECTION_VIEWS_FIND..
REPORT zjpmuim306 NO STANDARD PAGE HEADING LINE-SIZE 250 MESSAGE-ID
zjpm001.
*&   I N B O U N D V I A   A B A P : Batch input Session method     *
*&   Development ID: IM_DD_306_LJP                                   *
*&   Report        : ZJPMUIM306                                      *
*&   The Purpose of the Object is to interface Create Input Record   *
*&   for SAP Migration from the Material master of BPCS All the      *
*&   information received at BPCS is collected into a single record. *
*&   By using session method upload data from file ,one item is
*&   created for one record                                          *
*&   Change Log:                                                     *
*&   Init       Who              Date         Text                   *
*& MALIKDH1   Seshu Reddy    26-07-2003   Initial Version           *
                         Constants                                   *
CONSTANTS:c_vkorg(4) type c value 'JP20',        " Sales Organization
          c_vtweg(2) type c value 'TR' ,         " Distribution Channel
          c_werks(4) Type c value 'JP01' ,       " Plant
          c_viewlist(15) VALUE 'KDEALBSZXVPCFQG'," View list
          c_scm_view TYPE msichtausw-dytxt VALUE 'SCM View',
          c_sd_view TYPE msichtausw-dytxt VALUE 'SD View',
          c_seq_code(2) VALUE 'Z1',              " Sequential Code
          c_keep(1) TYPE c VALUE 'X',           " Keep
          c_group LIKE apqi-groupid VALUE 'IM306', " Session Name
          c_tcode LIKE tstc-tcode VALUE 'MM02', " Transaction Code
          c_blank(1) VALUE ' ',                   " Blank
          c_intls(1) VALUE 'N'.                  " Logistic Status
              Variables                                      *
DATA: g_flag1(1), " Variable to hold
      g_flag(1),   " Variable to hold
      g_file LIKE rlgrap-filename VALUE
     'C:\Documents and Settings\seshur\Desktop\HCLT123.CSV'. " File name
       Internal tables/ Work area                           *
Internal Table for Delimter
DATA : BEGIN OF t_delim OCCURS 0,
       text(1000),
       END OF t_delim.
Internal table for BDC processing
DATA : t_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
Internal table for holding the data which has to be uploaded.
DATA: BEGIN OF t_bpcs OCCURS 0,
      matnr(15) TYPE c, " material no
      dosage(40) TYPE c, " Dosage form(Local)
      appearance(40) TYPE c, " Appearance
      idcode(6) TYPE c,     " Identification Code
      prostformno(10) TYPE c, "SOP
      weitab(7) TYPE c,    " Weight/tablet
      uom1(2) TYPE c,     " UOM of Carton
      uom2(2) TYPE c,     " UOM of Case
      carsize(14) TYPE c, " Carton size
      cassize(14) TYPE c, " Case size
      rupqty(11) TYPE c, " Round up
      abvname(3) TYPE c, " Product short name
      END OF t_bpcs.
*Internal table for t_bpcs
DATA: BEGIN OF t_mdata OCCURS 0,
      matnr LIKE marc-matnr, " Material number
      zzjp_dos_frm LIKE marc-zzjp_dos_frm, " Dosage form(Local)
      zzjp_aprn LIKE marc-zzjp_aprn, " Appearance
      zzjp_con_id LIKE marc-zzjp_con_id," Identification Code
      zzjp_nyu_sop LIKE marc-zzjp_nyu_sop,"SOP
      zzjp_wei_tab(10) type c , " Weight/tablet
      zzjp_bio LIKE marc-zzjp_bio,"Biologics Indicator
      zzjp_itf LIKE marc-zzjp_itf, " ITF code
      zzjp_car(2) type c, " UOM of Carton
      zzjp_cas(2) type c, " UOM of Case
      zzjp_car_size(11) type c," Carton size
      zzjp_cas_size(11) type c, " Case size
      zzjp_rupqty(11) type c, " Round up
      zzjp_init_ls LIKE marc-zzjp_init_ls, " Logistic Status
      zzjp_re1 LIKE marc-zzjp_re1, "Document type(Local)
      zzjp_re2 LIKE marc-zzjp_re2, "Report type
      zzjp_re3 LIKE marc-zzjp_re3, "Shipping report type
      zzjp_pro_id LIKE mvke-zzjp_pro_id," Product output sequence
      zzjp_bu_id LIKE mvke-zzjp_bu_id, " Business unit indicator
      zzjp_abv_name LIKE mvke-zzjp_abv_name," Product short name
      zzjp_abv_id1 LIKE mvke-zzjp_abv_id1," Product short name output
      zzjp_abv_id2 LIKE mvke-zzjp_abv_id2," Product short name internal
      zzjp_spl_id LIKE mvke-zzjp_spl_id, " Sample internal order
      END OF t_mdata.
Internal table for Mara Table
DATA: BEGIN OF t_mara OCCURS 0,
      matnr LIKE mara-matnr, " material Number
      vpsta LIKE mara-vpsta, " Maintenance status of complete material
      pstat like mara-pstat, " Maintenance status
      END OF t_mara.
Internal table for Material Master View Selection Screens
DATA: BEGIN OF t_bildtab OCCURS 0.
        INCLUDE STRUCTURE mbildtab.
DATA: END OF t_bildtab.
internal table for T_bildtab
DATA: t_bildtab_dup LIKE t_bildtab OCCURS 0 WITH HEADER LINE.
*Work area for T_bildtab internal table(Views Selection)
DATA: BEGIN OF w_data,
      flag1 type c,
      anzd70 TYPE i,
      field1(20) type c,
      field2(20) type c,
      field3(20) type c,
      field4(20) type c,
      count(2) TYPE c,
      END OF w_data.
            Main Processing                           *
START-OF-SELECTION.
Store data from file into internal table
PERFORM f_uplaod_data.
Transfer the uploaded data into t_mdata internal Table
PERFORM f_process_data.
Selecting The views based on Material number
PERFORM f_view_list.
Open a BDC Session
PERFORM f_bdc_open.
*Selecting the fields from mara table
SELECT matnr
         vpsta
         pstat
    FROM mara
INTO TABLE t_mara
FOR ALL ENTRIES IN t_mdata
WHERE matnr = t_mdata-matnr.
SORT t_mara BY matnr.
SORT t_mdata BY matnr.
Transfer the uploaded data into BDCDATA structure
PERFORM f_process_bdc.
Close The BDC Session
PERFORM f_close_group.
*&      Form F_VIEW_LIST                                             *
         Routine to used for Calling the function module            *
          Selection_views_find                                      *
FORM f_view_list.
CALL FUNCTION 'SELECTION_VIEWS_FIND'
       EXPORTING
            bildsequenz     = c_seq_code
            pflegestatus    = c_viewlist
       TABLES
            bildtab         = t_bildtab
       EXCEPTIONS
            call_wrong      = 1
            empty_selection = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " F_VIEW_LIST
*&      Form f612_view_sort                                          *
Routine to used for Selecting The views based on Material Number *
FORM f612_view_sort.
t_bildtab_dup[] = t_bildtab[].
Reading the Internal table t_mara
READ TABLE t_mara WITH KEY matnr = t_mdata-matnr.
TRANSLATE t_mara-pstat USING ' $'.
CLEAR: w_data-flag1, w_data-anzd70.
LOOP AT t_bildtab_dup.
    IF t_bildtab_dup-pstat CA t_mara-pstat.
      w_data-anzd70 = w_data-anzd70 + 1.
      IF t_bildtab_dup-kzanz IS INITIAL.
        t_bildtab_dup-kzanz = 'X'.
        w_data-flag1 = 'X'.
        MODIFY t_bildtab_dup.
      ENDIF.
    ELSE.
      IF NOT t_bildtab_dup-kzanz IS INITIAL.
        CLEAR t_bildtab_dup-kzanz.
        w_data-flag1 = 'X'.
        MODIFY t_bildtab_dup.
      ENDIF.
    ENDIF.
ENDLOOP.
TRANSLATE t_mara-pstat USING '$ '.
IF NOT w_data-flag1 IS INITIAL.
    SORT t_bildtab_dup BY kzanz DESCENDING idxbd ASCENDING.
ENDIF.
*Reading The internal table for T_bildtab_dup
READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
IF t_bildtab_dup-kzanz = 'X'.
    WRITE sy-tabix TO w_data-count.
    w_data-count = w_data-count + 2.
    IF w_data-anzd70 > 18.
      w_data-count = w_data-count - 18.
    ENDIF.
    CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field1.
    CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field2.
ENDIF.
READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
IF t_bildtab_dup-kzanz = 'X'.
    WRITE sy-tabix TO w_data-count.
    IF w_data-anzd70 > 18.
          w_data-count = w_data-count + 2.
      w_data-count = w_data-count - 18.
    ENDIF.
    CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field3.
    CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field4.
ENDIF.
ENDFORM.                    " f612_view_sort
*&      Form f_uplaod_data                                           *
Routine to used for Uploading the data from file to Internal table *
FORM f_uplaod_data.
CALL FUNCTION 'WS_UPLOAD'
       EXPORTING
            filename                = g_file
            filetype                = 'DAT'
       TABLES
            data_tab                = t_delim
       EXCEPTIONS
            conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            OTHERS                  = 10.
IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF t_bpcs IS INITIAL.
    LOOP AT t_delim.
      SPLIT t_delim-text AT ',' INTO t_bpcs-matnr
                                     t_bpcs-dosage
                                     t_bpcs-appearance
                                     t_bpcs-idcode
                                     t_bpcs-prostformno
                                     t_bpcs-weitab
                                     t_bpcs-uom1
                                     t_bpcs-uom2
                                     t_bpcs-carsize
                                     t_bpcs-cassize
                                     t_bpcs-rupqty
                                     t_bpcs-abvname.
      APPEND t_bpcs.
    ENDLOOP.
ENDIF.
ENDFORM.                    " f_uplaod_data
*&      Form F_BDC_OPEN
      Routine to create BDC Session to be processed
FORM f_bdc_open.
CALL FUNCTION 'BDC_OPEN_GROUP'
       EXPORTING
            client              = sy-mandt
            group               = c_group
            keep                = c_keep
            user                = sy-uname
       EXCEPTIONS
            client_invalid      = 1
            destination_invalid = 2
            group_invalid       = 3
            group_is_locked     = 4
            holddate_invalid    = 5
            internal_error      = 6
            queue_error         = 7
            running             = 8
            system_lock_error   = 9
            user_invalid        = 10
            OTHERS              = 11.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE S000 WITH 'Batch input session is created successfully'(T02).
ENDIF.
ENDFORM.                    " F_BDC_OPEN
*&      Form F_PROCESS_BDC
      Processing of BDCDATA Structure
FORM f_process_bdc.
LOOP AT t_mdata.
    PERFORM f612_view_sort.
    PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0060'.
    PERFORM f_bdc_field USING 'BDC_CURSOR'
                                  'RMMG1-MATNR'.
    PERFORM f_bdc_field USING 'BDC_OKCODE'
                                  '=AUSW'.
    PERFORM f_bdc_field USING 'RMMG1-MATNR'
                                  t_mdata-matnr.
    PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0070'.
    PERFORM f_bdc_field USING 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
    IF w_data-anzd70 > 18.
      PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                  '=P+'.
      PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0070'.
      PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
    ENDIF.
reading the t_bildtab internal table
    READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
    IF t_bildtab_dup-kzanz = 'X'.
      PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                    w_data-field1.
      PERFORM f_bdc_field       USING w_data-field2 'X'.
      g_flag = 'X'.
    ENDIF.
reading the t_bildtab internal table
    READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
    IF sy-subrc EQ 0.
      g_flag = 'X'.
    ENDIF.
    IF t_bildtab_dup-kzanz = 'X'.
      PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                    w_data-field3.
      PERFORM f_bdc_field       USING w_data-field4 'X'.
      g_flag1 = 'X'.
    ENDIF.
    IF g_flag = 'X' AND g_flag1 = 'X'.
      PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0080'.
      PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-VTWEG'.
      PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      PERFORM f_bdc_field       USING 'RMMG1-WERKS'
                                    c_werks.
      PERFORM f_bdc_field       USING 'RMMG1-VKORG'
                                    c_vkorg.
      PERFORM f_bdc_field       USING 'RMMG1-VTWEG'
                                    c_vtweg.
      CLEAR g_flag.
      CLEAR g_flag1.
    ELSE.
      IF g_flag = 'X'.
        PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0080'.
        PERFORM f_bdc_field       USING 'RMMG1-WERKS'
                                    c_werks.
        PERFORM f_bdc_field      USING 'BDC_OKCODE' '/00'.
      ELSE.
        IF g_flag1 = 'X'.
          PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0080'.
          PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                        'RMMG1-VTWEG'.
          PERFORM f_bdc_field       USING 'RMMG1-WERKS'
                                      c_werks.
          PERFORM f_bdc_field       USING 'RMMG1-VKORG'
                                        c_vkorg.
          PERFORM f_bdc_field       USING 'RMMG1-VTWEG'
                                        c_vtweg.
          PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                         '=ENTR'.
        ENDIF.
      ENDIF.
    ENDIF.
*Processing of SCM View
    PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '4000'.
    PERFORM f_bdc_field       USING 'BDC_CURSOR' 'MARC-ZZJP_DOS_FRM'.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_DOS_FRM'
                                  t_mdata-zzjp_dos_frm.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_APRN'
                                  t_mdata-zzjp_aprn.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_CON_ID'
                                  t_mdata-zzjp_con_id.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_NYU_SOP'
                                  t_mdata-zzjp_nyu_sop.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_WEI_TAB'
                                  t_mdata-zzjp_wei_tab.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_CAR'
                                  t_mdata-zzjp_car.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_CAS'
                                  t_mdata-zzjp_cas.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_CAR_SIZE'
                                  t_mdata-ZZJP_CAR_SIZE.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_CAS_SIZE'
                                  t_mdata-ZZJP_CAS_SIZE.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_RUPQTY'
                                   t_mdata-ZZJP_RUPQTY.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_BIO'
                                  t_mdata-zzjp_bio.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_ITF'
                                  t_mdata-zzjp_itf.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_INIT_LS'
                                  t_mdata-zzjp_init_ls.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_RE1'
                                  t_mdata-zzjp_re1.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_RE2'
                                  t_mdata-zzjp_re2.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_RE3'
                                  t_mdata-zzjp_re3.
    PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
*Processing of SD View
    PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '4000'.
    PERFORM f_bdc_field       USING 'BDC_CURSOR' 'MVKE-ZZJP_PRO_ID'.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_PRO_ID'
                                  t_mdata-zzjp_pro_id.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_BU_ID'
                                  t_mdata-zzjp_bu_id.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_ABV_NAME'
                                  t_mdata-zzjp_abv_name.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_ABV_ID1'
                                  t_mdata-zzjp_abv_id1.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_ABV_ID2'
                                  t_mdata-zzjp_abv_id2.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_SPL_ID'
                                  t_mdata-zzjp_spl_id.
    PERFORM f_bdc_field      USING 'BDC_OKCODE' '/00'.
    PERFORM f_bdc_dynpro      USING 'SAPLSPO1' '0300'.
    PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                  '=YES'.
perform f_bdc_insert.
REFRESH T_BDCDATA.
ENDLOOP.
ENDFORM.                    " F_PROCESS_BDC
*&      Form f_bdc_dynpro
p_prog is the program name to which data is passed                *
p_dyno is the screen number to which the data is passed
    Routine for populating the BDCDATA structure with the
    Screen related information
FORM f_bdc_dynpro USING    p_prog
                           p_dyno.
t_bdcdata-program = p_prog.
t_bdcdata-dynpro   = p_dyno.
t_bdcdata-dynbegin = 'X'.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM.                    " F_bdc_dynpro
*&      Form F_BDC_FIELD
      p_fnam is the field name to which value is passed
      p_fval is the field value which is passed
   p_fnam is the field name to which value is passed
   p_fval is the field value which is passed
FORM f_bdc_field USING    p_fnam
                          p_fval.
t_bdcdata-fnam = p_fnam.
t_bdcdata-fval = p_fval.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM.                    " F_bdc_field
*&      Form F_PROCESS_DATA                                          *
     Routine to used for moving data from T_bpcs internal table to *
     t_mdata Internal Table                                         *
FORM f_process_data.
LOOP AT t_bpcs.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              input = t_bpcs-matnr
         IMPORTING
              output = t_mdata-matnr.
    MOVE t_bpcs-dosage TO t_mdata-zzjp_dos_frm.
    MOVE t_bpcs-appearance TO t_mdata-zzjp_aprn.
    MOVE t_bpcs-idcode TO t_mdata-zzjp_con_id.
    MOVE t_bpcs-prostformno TO t_mdata-zzjp_nyu_sop.
    MOVE t_bpcs-weitab TO t_mdata-zzjp_wei_tab.
    MOVE c_blank TO t_mdata-zzjp_bio.
    MOVE c_blank TO t_mdata-zzjp_itf.
    MOVE t_bpcs-uom1 TO t_mdata-zzjp_car.
    MOVE t_bpcs-uom2 TO t_mdata-zzjp_cas.
    MOVE t_bpcs-carsize TO t_mdata-zzjp_car_size.
    MOVE t_bpcs-cassize TO t_mdata-zzjp_cas_size.
    MOVE t_bpcs-rupqty TO t_mdata-zzjp_rupqty.
    MOVE c_intls TO t_mdata-zzjp_init_ls.
    MOVE c_blank TO t_mdata-zzjp_re1.
    MOVE c_blank TO t_mdata-zzjp_re2.
    MOVE c_blank TO t_mdata-zzjp_re3.
    MOVE c_blank TO t_mdata-zzjp_pro_id.
    MOVE c_blank TO t_mdata-zzjp_bu_id.
    MOVE t_bpcs-abvname TO t_mdata-zzjp_abv_name.
    MOVE c_blank TO t_mdata-zzjp_abv_id1.
    MOVE c_blank TO t_mdata-zzjp_abv_id2.
    MOVE c_blank TO t_mdata-zzjp_spl_id.
    APPEND t_mdata.
ENDLOOP.
ENDFORM.                    " F_PROCESS_DATA
*&      Form f_bdc_close
      Routine to close the BDC Session
FORM f_close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'
       EXCEPTIONS
            not_open    = 1
            queue_error = 2
            OTHERS      = 3.
IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " f_close_group
*&      Form f_bdc_insert
     routine to input batch data into the Transaction MM02 from the
     session created
FORM f_bdc_insert.
CALL FUNCTION 'BDC_INSERT'
         EXPORTING
              tcode            = c_tcode
         TABLES
              dynprotab        = t_bdcdata
         EXCEPTIONS
              internal_error   = 1
              not_open         = 2
              queue_error      = 3
              tcode_invalid    = 4
              printing_invalid = 5
              posting_invalid = 6
              OTHERS           = 7.
    IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDFORM.                    " f_bdc_insert
Reward Points if it is useful
Thanks
Seshu

Material Master views for every material type

HI Expertis,
I am facing to the big problem. My requirement is to identify the Material Master Views relevent to the each and every Material Type.
As an example, for the material type "FGTR" what should be the required views to create material master?
From the MM01 Txn i found 36 Material types. Also found the standard views in "OMS2" Txn. But in OMS2 txn it gives me almost all the views in material master.
Atlease i hope to categorize the material types which are going to use same material views. So i can ask abaper to develop it.
these are the required Material types : MODE, FGTR, WETT, KMAT, LEER, LGUT, FERT, FOOD, INTR, CONT, IBAU, HERS, NLAG, NOF1, UNBW, HIBE, VERP, FRIP, PIPE, FHMI, ROH, LEIH, HALB, DIEN, ERSA, HAWA
I would be gratefully thank u, if u can guided me on this matter.
Thanx & Regards,
Rashika.

Hi,
You can ask your abaper to write a small program by using table t134(T134-PSTAT) and T132T .From this tables ,for each material type, you get all views.
User department Maintenance status
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
hopw this will help you.
With Regards,
Jaheer

"Mfr part profile" setup for various material types

Hello All,
I'd like to set a default value of "Mfr part profile" field ("Purchasing" screen in 01 Std industry sequence) different for various material types. Currently I have 2 entries maintained in MaterialsManagement>Purchasing>MaterialMaster>DefineManufacturerPartProfile (one with AMPL management and one without). I'd like to get the first entry set as default for HAWA material type and the 2nd for ROH.
Thanks in advance for your help on this!
Jacek

Hi Troinski,
Its not possible in SAP, you can create Z transaction for create material wth dafult values.
Thanks
Bala

HERS Material type

Hi ,
When I try to create a new MPN material Master thru T code MM01 (using HERS material type ) , system is prompting me a message "Ext / INT number assignent is not possible for Material type HERS"
Do I need to make necessary settings in IMG or I am using worong way to create a MPN Material Master.I am new in SAP so dont know what is the standard way to do it.
Pls help
REGARDS
SANDEEP

Hi
Check the MMNR and assign the group(Number ranges) to HERS

Allow mov type 261 and 262 for a material type only

Requirement is to allow movt type 261 and 262 for a particular material type.( Assume Only 261 - 262 issue transactions happen against that material type.)
User to be restricted, while material issue (migo), for the material type XXXX to 261 - 262 movt type only.
No any other movt type allowed for this material type while issuing material.
All suggestions welcomed.
Regards,
Rakesh

Thanx amit.
But same user uses all other movt types for other material type also.

Hide views in MM01 for all material type in one time

Hi,
I have a requirement to hide the views for all material type at at time.
i tried with OMS2 , it is allowing me to do for one matrial type.
could any one tell me how to hide the views for all material type in one short.
Thanks in adv..

Hi Rakesh,
Up to my knowledge it is not possible to do view setting for all material type in one shot simply because it is material type dependent.
If trying to change fields in material master then use OMS9. This also material type linked to field reference group. And we can change the setting of field selection group in one shot. This will affect the material types linked to it.
Hope it helps
sBk

Print in different page for different material type in Sapscript

Hi all
How do I do the above matter?
Currently I have a script that print all material according to some condition.
My client request to have a different page of material list for different material type.
Please advise
az

Hi,
1) Sort the internal table by material type.
call func 'OPEN_FORM'.
loop at itab.
at new mattype.
if mattype = 'A'.
call fun 'START_FORM'.
   exporting
    page   =    'PAGEA'.
elseif mattype = 'B'.
call fun 'START_FORM'.
   exporting
    page   =    'PAGEB'.
endat.
call func 'WRITE_FORM'.
AT end of mattype.
call function 'END_FORM'.
endat.
endloop.
call function 'CLOSE_FORM'.
Thanks,
Nethaji.

Doing GR for a material type, system should give a message like QI required

Dear Friends
While doing MIGO(GR) for a material type, system should give a message like Quality Inspection required
but Client requirement is not to maintain QM view or Inspection Type 01for material type
Any setting required
Thanks & Regards
Gajendranath

Hi
Please check user exit QBCK0003 |Extended QM check for goods receipt
Regards
sujit

Unable to create PR via SO for DIEN material type

Hi Gurus
Need yr expertise.. I have a request from user to create PR from Sales Order for DIEN material type..Is it possible to create PR from SO for DIEN material type?
When I try to create I hit an error "No comsumption account".. This is because DIEN material type do not have valuation class..
Pls advise on the possiblities to create PR from SO (3rd party process) for DIEN...
Sanjay

Hi,
Not sure... but when you create the material master with DIEN as the material type the item category group will be deafulted to LEIS, change this to BANS or maintain TAS in the order and try. Please post the result.
Prase

Valuation category for DIEN material type

Dear all,
I have a requirement in which I need to maintain two price for DIEN material type ,I have created two valuation type and asssigned to a valuation category and If Itry to assign valuation category in Material master it is Grayed out ,even if I try in field selection also it is not working ,can't we have two valaution prices for service material? is that SAP standard?
Regards
kantha

can any body help me
Kantha

Number range for the Material type

Hi,
When I am trying to create the number range for the Material Type, when I choose the groups the following error has occurred
No elements exist for the object/sub-object
What may be the problem
Thanks in advance

Hi Binu,
Had similar issue lately.
This is happening as the download of the category is not done properly.
So the solution which wrkd for me was to dwld the content again correctly, and if its done, there'll be no such error shootin up.
Suji

How to configure Alpha Numeric No range for the Material Type

Dear Expert,
i kindly request for expert help on alpha numeric no range for the Material Type.
business is looking for material no like 910442208571D. at present we have no range like 9000000000000 to 9999999999999
how i can configure in the system??
pl. help me on this
Thanks a lot
H shah

Hi,
System will not bring alphanumeric number of materials automatically during MM01.
Check use exit MGA00002 - Material Master (Industry): Number Assignment.
Also check 2 Function Modules:
EXIT_SAPLMG02_001 - Customer Exit: Internal Material Number Assignment
EXIT_SAPLMG02_002 - Customer Exit: External Material Number Assignment.
Regards,
Biju K

Modifying selection screen for adding material type in report ME2L / ME2N

Dear Friends ,
I want to add Material type as another selection criteria for the report ME2L.
How can i manage it using customising or ABAP enhancements ?
I do fine various enhancement point in its coding but not getting exact clue for managing this .
Thanks in advance.

Hello....
The program for the t-code ME2L is RM06EL00
In this we have the following portion
Parameter und Select-Options *
After this we have a couple of Select-options and parameters
followed by includes
INCLUDE fm06lcs1.
INCLUDE fm06lcs3.
INCLUDE fm06lcs4.
INCLUDE fm06lcs2.
You can write the select-options/parameters in any of these includes
Fot this..click on the spiral icon-> go to any include
click on "EDIT"(from the top menu) -> "Enhancement operations" -> "show implicit Ehhancement options" -> click on "RM06EL00"(report name)
A different coloured line appears at the bottom of the include.
Place your cursor on this line ..Right click -> "Ehhancement Implementation" -> Create ...give names according to customer name space and write your code here ...then activate it.....
Please also note that this selection must be filtered somewhere..so search the code for the tables that may contain this field and see if an "ENHANCEMENT-SECTION" or point/spot is available
Pls check , revert and reward if helpful
Regards
Byju

Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

Hi friend,
i have issue regarding mandatory self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.

Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet

Screen no. for HERS Material type

Similar Messages

Maybe you are looking for