Screen not coming back on after phone call??!!
this is a brand new 3g phone. And I have had a 1st Gen iPhone from the original release date.
However, when I make a call and put the phone to my ear, the screen goes black as it should. But upon the conclusion of the call the screen does not come back on until I have locked it and unlocked it again!!
Has this happened to anyone else?
Same thing here!! I was calling my wife and it happened 3 times in a row in a matter of minutes. I rebooted the phone and it went away. Hasn't crept up on me again, yet (knock on wood).
I don't know whether it makes a difference and whether they are technically the same, but I upgraded the firmware that was released 07/10/2008 that is from Apple's Servers from version 5A345 to 5A347 just to see if this fixed any last minute glitches.
I hope this problem never surfaces again. We all paid a lot for these and spent a lot of time waiting for activation.
Similar Messages
-
Laptop screen not coming back on after closing and reopening lid.
I remember having this issue before but cannot seem to find the documentation that i used to fix this previously.
I have a Dell b120 with an intel 915 igp
When i shut the lid and reopen it, the screen remains blank. If i recall, it was something i had to set in the power management.Upon upgrading to the 2.6.36 kernel, Lenovo S10-3 would not resume after suspend.
Adding 'intel_idle.max_cstate=0' to the kernel boot options makes it work.
Tried that because of: https://bugs.launchpad.net/bugs/634702
May work for other intel graphics cards as well. -
Why will my screen not turn back on after powering down iPhone?
When my AT> 64gb iPhone 4s turns off, or dies, for some reason when I try to turn it back on, the phone itself turns on but the screen doesnt. Sometimes the screen will be a bright white, sometimes it will appear as if the LCD is cracked, and sometimes its just straight black. Eventually (like up to 12-15 hours later), I somehow manage to get it turned back on like regular, and it works fine (however occasionally, there is a white circle that surrounds the middle of the screen. Anyone have any clue whats going on with it? I'd just get the LCD replaced, but it only doesn't work when the phone turns off and back on, so i don't know if that would help at all.
So u Have restarted it on the ipod?
and you have turned it off and on?
have you tried on your laptop or mac? -
Response not coming back to ESB when calling BPEL process
Hi,
I am doing some demo,
the actual process is, in ESB, I am reading a file and passing thsoe fiel contents to BPEL as SOAP service. In BPEL proecess, I processed the message and sending the response back to the ESB. When I deployed and check the process flow in the BPEL console, everything looks fine, I mena, it sending the response back to the ESB, where as in ESB process, I am not able to see the response.
Is there any thing that I am missing?
Thanks.Is the BPEL process a synchronous process?
Also for performance reasons it it best to call BPEL process via the direct jca connector not SOAP.
You do this by just selecting the BPEL process in the routing service going through the wizard. There is no need to creat a SOAP service. The good this about this is that in the ESB process it provides a link to the BPEL process.
cheers
James -
I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.
we have a same problem
-
I recently update my iphone and now is not allowing me to access my contacts, emails etc. When I try to switch it on it has an itunes symbol on the front with the usb plug and an arrow. What do I do to get my contacts etc back and make phone calls?
To be more clear:
Was you phone hacked/jailbroken BEFORE you hooked it up? -
My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
IPhone apps not resuming after phone call - iOS 7 bug
iPhone apps not resuming after phone call - iOS 7 bug
With iOS 6, while playing music on Spotify or playing Candy Crush, etc, if the phone rang and I answered, or if I made a call, once the call was ended, the app I was using would resume. The music would start playing again or the game would resume.
In iOS 7 this isn't working. Listening to music, I answer a call, music stops and when call is ended, nothing! the phone stays on the phone app.
anybody else see this behaviour?
thanks!Any ideas anyone?
thanks -
Screen stays on when making a phone call
I am wondering if there is a setting for making the screen go black when making a phone call. I have done some research and it seems there should be a proximity sensor that makes the screen turn off when the sensor is activated. If there is no setting for this sensor then I have to believe that the phone is defective and must be returned - I just wanted to be sure that a setting doesn't exist to correct the problem before doing that. It is a Droid X2. Thank you in advance for any help provided!
Yes, there is a small "proximity sensor" in the upper left corner next to the ear piece. When you "cover" it after making a call, the screen should go blank. If it is staying on when you cover that (with your face/ear or even your hand) if sounds like it is defective. There are no Settings that I am aware of that makes the screen stay "always on". At least on my Droid X.
Have you tried running in SAFE MODE just to make sure it's not some 3rd party app causing the problem?
- Power Off
- Press & hold the MENU button (far left button)
- Power up phone, but continue to HOLD the MENU button for like 1-2 mins.
Phone should come up saying "SAFE MODE" in lower left side.
Test you issue.
To get out of SAFE MODE, just power off & on as usual. -
Any application to colour the screen behind the keypad of the phone call numbers ?
Hello, please need help.
With ios7 newly downloaded, is there any function to change the coulour of the screen behind the keypad of the phone call numbers.
Its too much white actually and unseenable while outsite or in day light.
Thank you for you help. ? Ci KayNote that this simply identifies the device, not the user. So if a user sells or gives away his device if you use this mechanism the new owner will be able to access anything from the old owner.
Additionally, you also need to handle device replacement-- i.e. owner takes device in for repair, gets a new device how do you disassociate the information from the old device and associate it with the new device and ensure that whomever gets the old device as a refurb does not have access.
rob. -
DLNA shows up after phone calls
After every incoming call I get on my Droid X, DLNA pops up. I don't use DLNA. But I cannot stop it from popping up which it does without any interaction from me. Since I cannot delete it from the phone (which I'd like to do) and since it has no settings to configure to stop it from executing, how can I get it to stop loading after phone calls?
If this is happening on the current software update, there could be a way of clearing it out. Instead of master resetting the device (also an option if these steps don't work), try clearing the cache on a few related applications.
Go to setting> applications> manage applications> all. Clear cache/data/force stops on the following applications: Dialer, Dialer Storage, DLNA, and Phone. Remove the battery after doing this. Retest this and see if it resolved the issues with DLNA popping up.
If this does not can someone try a master reset (steps) to see if this resolves the issue if the above steps do not? Please post the results. I researched this as much as possible, but I haven't noticed a common trend.
Thanks for bringing this to our attention, and please follow up with the results. -
Did not know simple things such as removing hyphen from phone numbers will be so complicated. How do i remove the hyphen from stored phone numbers since i am not able to make a phone call using MobileVOIP. Everytime i make a phone call i have to type the number.
Go into your contacts and edit them.
-
Why is my mail coming back up after i delete it
why is it, when I try to delete an email it keeps, coming back up after i delete it/ refresh.
Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
If that doesn't work, try re-indexing the mailboxes. This can take awhile if you have a lot of mail.
Reindex messages Mountain Lion -
My ipod 4th gen will not turn back on after my mom took it for disciplinary reasons
my ipod 4th generation will not turn back on after my mom took it from me for disciplinary reasons. Not grades! I am a 4.0 student. Pleae help!!
After charging overnight
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Imac will not turn back on after being unplugged. Is there something I can do?
imac will not turn back on after being unplugged. Is there something I can do?
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
Maybe you are looking for
-
Cannot revert to Windows 8 after installing Hyper-V Server 2012 R2
I own a laptop with a pre-installed Windows 8. I've installed Hyper-V Server 2012 R2 on top of it by mistake, and now I would like to get rid of it and revert it back to Windows 8. I've tried doing so by a backup USB, though it doesn't seem to work.
-
lion won't let me drag to trash saying it is required by osx thanks in advance for your help
-
Visible login data in log file
Hi all, when i use an import command via MaxL and log the process with "spool on" the SQL login data can be seen in the log file. --> MAXL> import database 'Sales'.'SalesDB' dimensions connect as 'essb_system' identified by 'SamplePW' using server ru
-
URGENT : Error Deploying MDB in 9ias 9.0.3
Hi I am using OJMS and am trying to deploy SLSB and MDB with durable subscriptions to a topic. I have configured the queue table and topic properly. While trying auto deploy of OC4J i am getting the following error... Auto-deploying MCAppBEAN.jar (No
-
How to maitain table maitainence for the table containing Long field
Hi , i have create a table with the following structure. MANDT MANDT LANG ZLNG char3 TEXT_ID ZTEXT_ID char8 TEXT_TYPE ZTEXT char35 TEXT TEXT_EB char4 LEN ZLEN int ZSTR LS_