Screen not refreshing properly, cursor leaves trail, also no sleep!

I have had a series of problems with my old G4. Most of which I have dealt with. I will describe them at the end in case they are relevant to the 2 issues I am still trying to solve. So here goes:
When I open a new program or new window within a program, wherever the cursor was resting, a small square, about an 1/8th of an inch on a side, remains from whatever window was open before.
Also, if I use my track ball on my Apple mouse, I get a trail of such squares, dragged from where the cursor started.
I checked the refresh rate setting in System Preferences/Displays and the refresh rate dialog box is grayed out, saying n/a. Also the only resolution option listed is 1280 x 1024. There used to be several options listed there.
Second problem is that computer will not go to sleep-- at all. I have to shut it down each evening instead. I have had problems with it not waking up and running regular maintenance (Onyx) solved that. But the sleep problem began after I did a number of fixes-- listed below...
Now the background in case any of it is relevant:
A few weeks ago, I was having program crashes. First iTunes would begin to open and immediately close. Then this started to happen with Word and also Safari was running for a while and then crashing often.
I was looking for help with these when I started having other problems. My display started, after the computer was inactive for a while, flashing on and off, instead of going to sleep. Simply touching a key would stop this.
I did an Archive and Install of the OS, after backing up all my data. And this eliminated the program crashes and the flashing display syndrome.
but a few days later my G4 started to turn itself off after running for a half hour or hour. I could then start it up and it would shut down by itself after a few minutes. Suspecting over-heating, I opened it up and found that the CPU heatsink fan was dead.
I replaced that fan with the 120mm model recommended on many discussion boards-- Silenx 120X38MM FanIXP-76-18 R... Had to play around with the power connection to the motherboard and splice some wires but all seemed to work well and my CPU temp runs around 62 or 63, hard drive is at 39 (celsius obviously). I think these temps are okay-- but I do not know what the machine temperatures were before as I only added the istat widget after the ran replacement.
so the machine is working again but there is this funny cursor trail artifact and the sleep problem. Maybe the heat damaged the video card? I don't know how to check this. Maybe the fan is causing the sleep issue?
I love my old machine and have edited a lot of video on it. I would very much like to keep it going! Thanks for your attention to this.
Joe

One question.. How long does the cpu fan usually last for? I have had my machine for about 1 year now, though the original owner has had it for a few years before he posted it up on craigslist.
I was just wondering so that I won't have a problem finding a replacement fan.

Similar Messages

  • [ATI open source driver, laptop] Screen not refreshing properly.

    Hi guys, I've been using ATI Catalyst driver and everything was working well until I decided to switch to open source driver.
    Now I have strange problem. My screen is not refreshing properly, I mean, for example I use Facebook and I decide to read something in other card in browser and after I switch cards I can still see some of the facebook page elements, window title does not change. After I move cursor over page elements are refreshing. When I scroll page, even a little bit, it refreshes as well. Or I use terminal, I type some command, press enter and sometimes screen doesn't refresh and I can't see output until I try to resize window or select text (which I can't see...).
    Sorry for not the best description, I will give you screens tomorrow because today I can't.
    My graphics card is Radeon HD 5400 Series and I use ASUS X52J laptop.

    tomk wrote:Install radeonhd and run X with no xorg.conf - it will autodetect the driver.
    The radeonhd works.  It's the radeon driver that doesn't work, I tried no xorg.conf and it still used the vesa driver.
    Last edited by cyclotomic (2009-06-27 07:11:12)

  • Screen not refreshing properly

    Hi:
    So this happened in Safari 4: http://www.vimeo.com/5122791
    I've talked to someone who said they had the same thing happen, and it was caused by having a second user account open at the same time. Which might indeed be the case.
    However, I've been noticing a similar behaviour in the finder, as well as in Lightroom 2, and trying to figure out what's causing it and what the solution might be. It seems (but I haven't been watching) to happen when I tax the processor. Once it's hit 100% (again, I'm guessing), it starts to do this and even if I close down other programs, it still does this until I restart Lightroom, or log out and log back in (for the Finder).
    Anyone seen this before? Not sure that it's a Macbook issue or a general display issue....

    Problem seems to have gone away.

  • SALV in Split Screen - not refreshing

    I have a Report based program with Selection Screen
    Upon entering valid Inputs program calls screen 100.
    On Screen 100, I placed following elements
      Docking Container
           Splitter Container with 2 rows with Docking container as Parent
                  Placed a Toolbar object on the Top container of the split. Toolbar has 2 buttons BSID & BSAD
                  If user clicks BSID, then I have to show a SALV report in Lower Split
                  If user clicks BSAD, then I have to show a bit different data SALV report in same Lower Split
    I tried several methods to refresh the data in SALV( I used 1 SALV)
    Data is not refreshing in the second split...
    I see that Lower Split container has children attribute set.. I tried to free() the lower container, but it deletes cmplete container itself, what can I do to refresh the data without completely redoing all the container stuff?
    Also Children attribute in Split container is Read-only, how can I change this one ?
    Valid answers would receive points...

    PROGRAM  yvtest3 LINE-SIZE 512.
                                  CLASSES
    CLASS: lcl_main  DEFINITION DEFERRED,
           lcl_event DEFINITION DEFERRED.
                                   TYPES
    TYPES: BEGIN OF t_kna1,           " Customer Info
            kunnr TYPE kna1-kunnr,
            name1 TYPE kna1-name1,
           END OF t_kna1.
    TYPES: BEGIN OF t_lfa1,           " Vendor Info
            lifnr TYPE lfa1-kunnr,
            name1 TYPE lfa1-name1,
           END OF t_lfa1.
                                   OBJECTS
    DATA: o_tlbar TYPE REF TO cl_gui_toolbar,
          o_split TYPE REF TO cl_gui_splitter_container,
          o_dock  TYPE REF TO cl_gui_docking_container,
          o_main  TYPE REF TO lcl_main,
          o_event TYPE REF TO lcl_event,
          o_top   TYPE REF TO cl_gui_container,
          o_down  TYPE REF TO cl_gui_container.
                                 INTERNAL TABLES
    DATA: i_kna1 TYPE STANDARD TABLE OF t_kna1,
          i_lfa1 TYPE STANDARD TABLE OF t_lfa1.
                                   PARAMETERS
    PARAMETERS: p_dbcnt TYPE sy-dbcnt DEFAULT '500'.
          CLASS lcl_event DEFINITION
          Events Definition
    CLASS lcl_event DEFINITION.
      PUBLIC SECTION.
        METHODS: on_click FOR EVENT function_selected OF cl_gui_toolbar
                           IMPORTING fcode.
    ENDCLASS.                    "lcl_event DEFINITION
          CLASS lcl_main DEFINITION
          Main Definition
    CLASS lcl_main DEFINITION.
      PUBLIC SECTION.
        METHODS: constructor.
    ENDCLASS.                    "lcl_main DEFINITION
                                    GET DATA
    START-OF-SELECTION.
    Get Customers
      SELECT kunnr name1
          FROM kna1
          INTO TABLE i_kna1
          UP TO p_dbcnt ROWS.
      IF sy-subrc = 0.
        SORT i_kna1 BY kunnr.
      ENDIF.
    Get Customers
      SELECT kunnr name1
          FROM kna1
          INTO TABLE i_kna1
          UP TO p_dbcnt ROWS.
      IF sy-subrc = 0.
        SORT i_lfa1 BY lifnr.
      ENDIF.
      IF i_kna1 IS NOT INITIAL OR i_lfa1 IS NOT INITIAL.
        CALL SCREEN '0100'.
      ELSE.
        MESSAGE 'No data exists for entry criteria'(001) TYPE 'I'.
        LEAVE TO LIST-PROCESSING.
      ENDIF.
          CLASS lcl_event IMPLEMENTATION
           Events Implementation
    CLASS lcl_event IMPLEMENTATION.
      METHOD on_click.
        CASE fcode.
          WHEN 'KNA1'.
            TRY.
                CALL METHOD cl_salv_table=>factory
                  EXPORTING
                    r_container = o_down
                  CHANGING
                    t_table     = i_kna1.
              CATCH cx_salv_msg.
                MESSAGE 'SALV - error'(007) TYPE 'I'.
                LEAVE TO LIST-PROCESSING.
            ENDTRY.
          WHEN 'LFA1'.
            TRY.
                CALL METHOD cl_salv_table=>factory
                  EXPORTING
                    r_container = o_down
                  CHANGING
                    t_table     = i_lfa1.
              CATCH cx_salv_msg.
                MESSAGE 'SALV - error'(007) TYPE 'I'.
                LEAVE TO LIST-PROCESSING.
            ENDTRY.
          WHEN 'EXIT'.
            LEAVE TO SCREEN 0.
        ENDCASE.
        cl_gui_cfw=>flush( ).
      ENDMETHOD.                    "on_click
    ENDCLASS.                    "lcl_event IMPLEMENTATION
          CLASS lcl_main IMPLEMENTATION
          Main Implementation
    CLASS lcl_main IMPLEMENTATION.
      METHOD constructor.
        DATA: lw_evnt  TYPE cntl_simple_event.       " Events
        DATA: li_evnt  TYPE cntl_simple_events.      " Events
    Create Docking Container
        FREE o_dock.
        CREATE OBJECT o_dock
          EXPORTING
            repid                       = sy-cprog
            dynnr                       = '0100'
            side                        = 1            " dock_at_left
            extension                   = 400
            lifetime                    = 1            " Dynpro
          EXCEPTIONS
            cntl_error                  = 1
            cntl_system_error           = 2
            create_error                = 3
            lifetime_error              = 4
            lifetime_dynpro_dynpro_link = 5
            OTHERS                      = 6.
        IF sy-subrc <> 0.
          MESSAGE 'Error creating Docking Container'(002) TYPE 'I'.
          LEAVE LIST-PROCESSING.
        ENDIF.
    Create Split Screen
        FREE: o_split,o_top,o_down.
        CREATE OBJECT o_split
          EXPORTING
            parent            = o_dock
            rows              = 2
            columns           = 1
          EXCEPTIONS
            cntl_error        = 1
            cntl_system_error = 2
            OTHERS            = 3.
        IF sy-subrc <> 0.
          MESSAGE 'Error creating Splitter Container'(003) TYPE 'I'.
          LEAVE LIST-PROCESSING.
        ENDIF.
    Set Sash Invisible
        o_split->set_row_sash( id    = 1
                              type  = o_split->type_sashvisible
                              value = o_split->false ).
    Set Row Height of 1st Container to fit Buttons
        o_split->set_row_height( id = 1 height = 5 ).
        o_top  = o_split->get_container( row = 1 column = 1 ).
        o_down = o_split->get_container( row = 2 column = 1 ).
    Create Toolbar
        CREATE OBJECT o_tlbar
          EXPORTING
            parent             = o_top
            lifetime           = 1
          EXCEPTIONS
            cntl_install_error = 1
            cntl_error         = 2
            cntb_wrong_version = 3
            OTHERS             = 4.
        IF sy-subrc <> 0.
          MESSAGE 'Error creating Toolbar'(004) TYPE 'I'.
          LEAVE LIST-PROCESSING.
        ENDIF.
    Add Buttons to the Toolbar
        CALL METHOD o_tlbar->add_button
          EXPORTING
            fcode            = 'KNA1'
            icon             = ' '
            butn_type        = 0
            text             = 'KNA1'
          EXCEPTIONS
            cntl_error       = 1
            cntb_btype_error = 2
            cntb_error_fcode = 3
            OTHERS           = 4.
        IF sy-subrc <> 0.
          MESSAGE 'Error creating Button on Toolbar'(005) TYPE 'I'.
          LEAVE LIST-PROCESSING.
        ENDIF.
        CALL METHOD o_tlbar->add_button
          EXPORTING
            fcode            = 'LFA1'
            icon             = ' '
            butn_type        = 0
            text             = 'LFA1'
          EXCEPTIONS
            cntl_error       = 1
            cntb_btype_error = 2
            cntb_error_fcode = 3
            OTHERS           = 4.
        IF sy-subrc <> 0.
          MESSAGE 'Error creating Button on Toolbar'(005) TYPE 'I'.
          LEAVE LIST-PROCESSING.
        ENDIF.
        CALL METHOD o_tlbar->add_button
          EXPORTING
            fcode            = 'EXIT'
            icon             = ' '
            butn_type        = 0
            text             = 'Exit'
          EXCEPTIONS
            cntl_error       = 1
            cntb_btype_error = 2
            cntb_error_fcode = 3
            OTHERS           = 4.
        IF sy-subrc <> 0.
          MESSAGE 'Error creating Button on Toolbar'(005) TYPE 'I'.
          LEAVE LIST-PROCESSING.
        ENDIF.
    Add Events
    register events for toolbar-control
        lw_evnt-eventid = o_tlbar->m_id_function_selected.
        APPEND lw_evnt TO li_evnt.
        o_tlbar->set_registered_events( li_evnt ).
    Create Event Handler
        CREATE OBJECT o_event.
        SET HANDLER o_event->on_click FOR o_tlbar.
      ENDMETHOD.                    "constructor
    ENDCLASS.                    "lcl_main IMPLEMENTATION
    *&      Module  STATUS_0100  OUTPUT
          Screen 100 Init
    MODULE status_0100 OUTPUT.
      IF o_main IS NOT BOUND.
        CREATE OBJECT o_main.
      ENDIF.
    ENDMODULE.                 " STATUS_0100  OUTPUT

  • ARD screen not refreshing

    I'm running ARD 2.2, and OS 10.4.6 on my laptop and a G5. When I try to log into the G5, it brings the screen up fine, but will not refresh. So, for every change, click, drag or whatever, I have to close the window and relaunch the session. I have no problems on any other machine. Any suggestions on what I might have to change on the G5 to be have the screens refresh automatically (btw, Refresh Screen is greyed out also)
    Thanks for any light you can shed on this.
    Robin
    G4 Powerbook   Mac OS X (10.4.6)  

    So cool!!! Thanks very much, Brent, for solving my problem.
    Maybe you can answer another one while we're at it. Before I knew the problem was on the G5, I tried deleting ARD (and all its parts) from my other machine - a g4 tower, also running 10.4.6.
    I reinstalled it and I updated it, but each time I try to launch it, it tries to reinstall itself again. Obviously, it's missing something, but I don't know what it could be. Any suggestions?

  • Remote Desktop Session - Sections of Screen Not Refreshing

    Remote Desktop Session Not Refreshing        
    I have 3 monitors.
    When I connect to any RDP session, my screen seems to lag.  For instance, I click the start button and nothing displays, but when I move the mouse, I see parts of the start menu appear. 
    This seems to be a recent issue. I RDP sessions throughout the day, so you could imagine how annoying this could be.
    Can anyone please give me some advice?
    Windows 7
    10GB RAM
    64-bit

    Hello NBell_DF,
    Please try to use other Windows 7 computer in the same network environment to see if they can normally remote desktop to the corresponding computers.
    If they also have the same issue, it may be related to the network. And then use the command ping <destination IP> to check the network delay.
    If other computer don’t have the similar issue, please update the network driver.
    Additionally, we could choose your connection speed to optimize performance.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Screen not refreshing after sleep mode

    Hello All,
         I have had a problem since 10.7.XX where my screen does not refresh after the computer goes into screen saver mode and then into sleep mode. When I move my mouse to resume i get a line drawn where I move my mouse and it reveals the login screen slowly. I can click on a login account and a small section of the screen refreshes where the login password is. Once I login it goes away. Was hoping Mountail Lion would address, but the problem continues from Snow Leopard. I am on a Imac 24" 2009 3.06Ghz dual core with 4 Gig of Ram, Nvidia GeForce 8800 GS 512mb. Thanks in advance for any advice.
    Chad

    Hello,
    See if it's related to this...
    It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
    The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
    http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
    "Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
    The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
    A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
    About iMac sleep...
    http://forums.macrumors.com/showthread.php?t=1529750
    Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
    http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

  • 9810 funtions and screen not working properly.

    HI all,  hoping to find some help here.   My 9810 is acting up.  None of the keys are working, even the 5 below the screen.  Sometimes the track pad works but not when it is pressed, and when the back botton works it puts me into sreach mode and looks for the letter "H" only.   The touch screen is fine. This was before upgrading to OS7.1.   I have done multiple hard resets and it does nothing at all.  This has been going on for three days now.  It hasn't be dropped or anything.
    Last night I upgraded to OS 7.1 now my back ground does not rotate properly with how the phone is being held it does rotate,  When you hold it upright it thinks its on it's side and vise versa.
    Has anyone had a similar problem, and how can I fix it?  Or is it one of those ones when you just get a new phone.   I have only had it since Feb 29, 2012
    Thanks

    Hello Champi,
    Welcome to the BlackBerry Support Community.
    The following article will assist regarding the issue you are experiencing with the keyboard and trackpad on your BlackBerry® Torch™ 9810 smartphone:
    Trackpad, trackball, or keyboard not working on a BlackBerry Smartphone - http://www.blackberry.com/btsc/KB29640
    We hope this helps.
    Thank you.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • HT1677 My web pages are not refreshing properly - works on my pc with windows?

    When I change accounts in my bank, the same info appears for each account.  It worked properly until the iOS upgrade to 6.
    It works fine with my PC, running windows and using explorer.
    Any idea what is causing this problem?

    This also did not clear the problem.  I also contacted the bank, and their reply was the same as yours.  I cleared the data and cookies, and the only thing that happened was that I have to key in all my information again for user Ida etc.  problem still exists.
    Once agin, the problem only appeared when the OS was upgraded, yesterday.  From other discussions I notice the new OS is causing lots of issues!

  • Brand new ipod touch screen not working properly

    My sons brand new ipod touch 32gb (well bought april 14) only occasionally will respond to the touch sceen, and when he does get into it the next screens dont work properly. Any suggestions?

    Try #2 and 3 in link below. If neither help, it's most likely a hardware issue then. Contact Apple and get it serviced.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • Screen not working properly

    The right side of my ipad 3 is not working properly and I cannot click on anything. I bought my ipad from Canada and am now out of the country and do not know who to contact for support. It has been less than a month since I bought it. I tried contacting the Canadian customer support service but when I try to enter my phone number it does not recognize it since it is a foreign number. Someone please help me with this as it is really frustrating and I have never experienced anything like this with any of my Apple products before.

    The right side of my ipad 3 is not working properly and I cannot click on anything. I bought my ipad from Canada and am now out of the country and do not know who to contact for support. It has been less than a month since I bought it. I tried contacting the Canadian customer support service but when I try to enter my phone number it does not recognize it since it is a foreign number. Someone please help me with this as it is really frustrating and I have never experienced anything like this with any of my Apple products before.

  • Af:table not refresh properly when corresponding ViewObject is repopulated

    I have a table T which is binding to a ViewObject VO.
    The initial population is working fine, but I met two problems while trying to manipulate the table data.
    Problem1:
    I have a ADD button which will add a new row to table T. The new Row is a empty Row, only Serial Number field is populated, all other fields (F1, F2, F3)are set to null by default.
    Result: the row is added, Serial Number is showing properly, but F1, F2 and F3 are showing the same value as the row above. At this moment, the respective VO entry of F1, F2 and F3 are still null. When I click a random row in the table, then the ValueChangeListeners of F1 and .etc are triggered and the screen value goes into the VO.
    Problem2:
    For each row I have a link, which will trigger a popup P. Some operation will be done in P and as the result, current row entries will be modified.
    Result: the VO entries are modified, but didn't reflect to the table completely. Again the field F1, F2 and F3 are not updating, still carrying the old data. This time, click other row won't trigger the ValueChangeListener. Instead, when you click the link of the same row, the new data are finally shown in the field F1, F2 and F3.
    Notice that simple refresh the table won't help(AdfFacesContext.getCurrentInstance().addPartialTarget(T)) in this case.
    F1 is a af:selectOneChoice, F2 and F3 are customized text input field.
    Any hint would be appreciated.

    Hi, the add function is purely add a new row into the vo:
    public void addRowActionListener(ActionEvent actionEvent) {
    if (ownerAdministratorDetailsHelper.getTableVO() != null) {
    ViewObject tableVO = ownerAdministratorDetailsHelper.getTableVO();
    OwnerAdministratorTableVORowImpl rowImpl =
    (OwnerAdministratorTableVORowImpl)tableVO.createRow();
    rowImpl =
    initializeNewRow(rowImpl,
    ownerAdministratorDetailsHelper);
    tableVO.last();
    tableVO.next();
    tableVO.insertRow(rowImpl);
    tableVO.setCurrentRow(rowImpl);
    the initializeNewRow method does nothing but set initial value for each entry in the new VO row.
    For B the pop-up is using a different taskflow, and depending on that taskflow's output when I click ok, I will repopulate the VO of the selected row accordingly.

  • IPhone 4 touch screen not working properly

    i have a white iphone 4 (at&t if that makes a difference)
    it used to work perfectly, i havent dropped it a single time, i dont have a case on it, neither do i have a screen protector.
    these past two days, my screen is going crazy. yesterday, while i was texting, when i click on backspace (to erase a mistake) it clicks the return button automatically and it doesnt stop for like 2 seconds so it skips a line for 2 seconds. then when i try to type, when i click on the letter R, it clicks on the letter S (for example). or when im on safari, i try scrolling up, it opens a website or clicks on something completely away from where i touched the screen. when it happened yesterday, i turned off and on the phone by holding the home+power buttons together until it turned off. it worked yesterday but today, it became crazier. it was wayyy worse. i cant use the phone normally because of this. sometimes i cant even unlock the phone. or it automatically ends the call when im talking to someone. when i unlock the phone, it starts acting upon itself and opens apps or opens the texts and types random letters. this is getting really annoying now that i cannot use my phone normally. is this only happening to me or has it/is it happening to someone elsee.. if it HAS HAPPENED in the past, how did you fix it ?
    someone please help me! thanks

    Good Morning S.GOPINADHAN,
    I understand your iPhone screen is black and you are not able to turn it on.  The article below will explain what to do when your iPhone is not responsive.  I'll also include instructions on how to back up your iPhone when you are able to turn it on.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    iCloud: Back up your iOS device to iCloud
    https://support.apple.com/kb/PH12520?locale=en_US
    Regards,
    - Judy

  • Why is my Itunes home screen not displaying properly?

    As you can see, certain text areas don't display properly. I have Windows 7, and I've played with the resolution (from max to min, including doing computer restarts), I have reinstalled Itunes, my graphics card driver, updated windows with all updates (including the optional ones), and changed font size etc.. from within Itunes. At one point I was very computer literate, but I can't seem to figure this one out. Any ideas?
    I also ran a full scan by norton antivirus, nothing was found. Any ideas? This is also a bad time to have to deal with this, as my iphone just crashed and lost all of its memory, but I have trouble selecting what music/apps etc I need to restore it. Even the restore screen is too messed up to use.
    Thanks for any help!

    I found another thread that suggests I need a resolution greater than 1024 by 768, but I'm currently running at 1600 by 1200. I am using our bigscreen (~60") as we don't have a computer monitor. This is a family computer, so maybe someone changed a setting that I wasn't aware of? I don't think Itunes was like this at the beginning, but I can't pinpoint when the screen actually started to look like this.
    Also, where else can I go for help, without paying for it? (I have trouble paying for help with a free application, especially after buying a large number of apple products)
    Thanks again!

  • Crystal reports not rendering properly and toolbar is also not visible in firefox 21.0

    my application works fine in chrome and internet explorer when it comes to crystal reports but Firefox is not rendering them properly. they are disturbed and toolbar is also not visible. i am using visual studio 2008 for development and the crystal reports that come with it. it works fine on local system but have issues when deployed on online server. all my clients are facing the same problem. they have to use alternate browser for printing reports. But i would be happy if Firefox renders them correctly. Anyone can help?

    i made this change in my code using Visual studio 2005 VB
    rpt.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response,
    False, "Title you want")
    it make me a PDF and i dont need the cristal report bar to print it
    i hope you help you

Maybe you are looking for