Screen not timing out

Ever since I got the update for my Incredible my screen will not time out regularly. I have pulled the battery, set and re-set the time out time, but doing so only helps for just a short time (less than a day). I have my screen time out set for 1 minute. Has anyone else experienced this problem or knows of a way to fix this? I had no issues with the screen time out before the update.

Is your screen timeout set up correctly? I have provided some steps below to set up your screen timeout. Hope this helps!
To Access Sound & Display Settings
From the main screen, touch Menu
Touch Settings
Touch Sound & Display
Select from below options, adjust as needed
Display Settings
Screen timeout
15 Seconds
30 Seconds
1 Minute
2 Minutes
10 Minutes
30 Minutes

Similar Messages

Shake and Shuffle While Screen's Timed Out?

Is the Shake to Shuffle feature not supposed to work when the screen is timed out? If so, to me, this is incredibly restrictive. I'd assume the shake to shuffle feature is added specifically so one can skip the song while performing some other activity - not requiring two hands. If I have to 'wake' my I-pod when I want to skip a song, why even add the shake to shuffle feature?
For instance. I bought my Nano specifically to listen to while I go on my long motorcycle rides. It's great. I put it on a wristband and run the cord up my jacket. I'd like to wear it on my left wrist and be able to give my left (clutch-hand) wrist a good shake when I want to skip a song, but I can't, as the screen times out pretty quickly and this disables the feature.
Please, in a future firmware update, can this issue be addressed? Either by allowing users to turn off the screen time-out, or by allowing a toggle to make the shake to shuffle feature work with the screen timed out?
Thanks

I just found this in the iPod's User Guide: http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
Use “Shake to Shuffle”
When the screen is on, you can give iPod nano a quick shake to skip to a random song. If the screen is off, press the Sleep/Wake button before you shake. “Shake to Shuffle” is on by default, but you can turn it off in Settings > Music.
So what you are experiencing is the default or expected behavior. If you are up to it, leave feedback to Apple on this using the form in this link.
http://www.apple.com/feedback/ipodnano.html
Is there a setting which will allow me to turn off the sleep feature and just have it go dim?
There is not.
B-rock

Request threads not timing-out

I am connecting to the crystal report server(11.5) using RAS APIs from my web application hosted on Websphere 6.
It seems the threads are not timing out, below are the threads:
com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClientWorkerThreaded$SenderThread
com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClientWorkerThreaded$ReceiverThread
com.crystaldecisions.thirdparty.com.ooc.OB.GIOPServerStarterThreaded$StarterThread
com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClientWorkerThreaded$SenderThread
com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClientWorkerThreaded$ReceiverThread
I tried putting clientSDKOptions.xml in my web application but it doesn't seem to be working.
Any inputs to this will be helpful.

I'd give more details concerning the clientSDKOptions.xml.
Sincerely,
Ted Ueda

OSB Business Service is not timing out on Connection/Read timeout

I have a weird problem with my business service in OSB. I have set the read timeout value as 1 sec and Connection timeout value as 1 sec. The response from backend is taking more than 2 seconds or even 3 seconds but still my business service is not timing out..! My service is still listening to the response from backend even if it comes after 3 seconds. I expect it to timeout after 2 seconds. Any ideas?
Business Service Configurations:
Service Type: Any type
Protocol: http
Retry count : 0
Retry Application Errors: No
Read Timeout: 0
Connection Timeout: 0
HTTP Request Method: POST
Result Caching: No
Let me know if you need any more information. Thanks in Advance.
Regards
Kaleem

AbhishekJ wrote:
Maximum possible successful response time of the service will be less than Read TO + Connection TO.
Alas, this is not true.
Maximum possible response time is infinity.
There are two reasons for that.
1. Read timeout is not counted as time from the successful connection establishing to the current moment. It is measured as time from the last received byte to now. Imagine a backend service that sends a single byte in a data packet every 500ms. Despite you have read timeout set to 1, the receiving of 3K message will take 25 minutes, and yet your Biz service will not timeout.
2. In HTTPS, handshake is handled by a separate library which has its own quirks. Specifically, if the key exchange is broken at particular point of handshake, the library re-establishes the connection and does it few times; in my experiements, the largest I could delay the eventual fault was about 3 minutes.
Having said that, in the OP message the configuration is Read=0, Connect=0, so I wonder why the timeout is expected.

Session not timing out...

Hi all, for some reason, my session is not timing out. If I
leave my browser and come back the next day, I can still continue
working. Can someone tell me why?
My code
<cfapplication name="myApp" sessionmanagement="yes"
sessiontimeout="#CreateTimeSpan(0,0,30,0)#">
Thank you so much,
C

Hi Ian, how can I make it so that after 30 minutes if a user
tries to
hit any page in my site, they would go back to login page to
relogin?
Thanks so much,
C
Check that the session data still exists. This will very
depending on
how exactly you are handling your login state. But since you
mention
session, I will presume you are rolling your own rather then
using the
<cflogin...> some other functionality.
I would do something like this in my code.
<cfif NOT StructKeyExists(session, "LoginName")>
<cflocation url="LoginForm.cfm">
</cfif>
Obviously you would set session.LoginName to some value on a
successful
login. Also note that if this check occurs before the
LoginForm.cfm
page you will create an endless loop. There are much more
sophisticated
solutions, but this gives you a bare bones option.

Lighthouse Approvals not timing out

I'm running into a problem where my lighthouse approvals are not timing out. I've declared the timeout value and I'm only transitioning onto the success path if the return from the approvals.approved variable is set to true. My problem is that the approval never times out, nor does it escalate if an escalator is declared.
Has anyone run into this before? Is there something in the Lighthouse Approvals that I need to change for this to work? Any help would be greatly appreciated
<Activity id='8' name='Director Approval'>
<Action id='0' process='Lighthouse Approvals'>
<Variable name='allApprovals' value='false'/>
<Variable name='approvalTemplate' value='UserForm-DirApproval'/>
<Variable name='approvalForm' value='UserForm-RoleApproval'/>
<Variable name='user' value='$(userView)'/>
<Variable name='authorized' value='true'/>
<Variable name='subject' value='Configurator'/>
<Variable name='approvals'>
<rule name='RuleLibrary:Get Approval Role'/>
</Variable>
<Variable name='additionalApproversList'>
<list>
<ref>director</ref>
</list>
</Variable>
<Variable name='timeout' value='3'/>
<Return from='approvals.approved' to='DirApproval'/>
</Action>
</Activity>

I found that if I make the timeout variable external rather than input in the Multi Approval subprocess that it works. It looks like the Lighthouse Approval calls the multi approval subprocess, but wasn't passing the timeout value to it correctly.

Iphone screen keeps timing out while watching videos

HHow do I keep my iPhones screen from timing out when watching videos. I never had this problem until recently

try check your video player's settings. if that dosen't help, the worst thing you could do is to change auto-lock to "never" in phone's settings -> general.

JRUN Apache connector not timing out despite setting recvTimeout

Hi,
       I have set a recvTimeout for the JRUN apache connector using the
[Thu Dec 15 15:29:48 2011] [notice] jrApache[3068: 20480]     ap_escape_uri(TimeoutTest.cfm) = TimeoutTest.cfm
[Thu Dec 15 15:29:48 2011] [notice] jrApache[3068: 20480] jrun_trans: sub-request so DECLINED
[Thu Dec 15 15:29:48 2011] [notice] jrApache[3068: 20480]     getRealPath(TimeoutTest.cfm) = TimeoutTest.cfm
[Thu Dec 15 15:29:48 2011] [notice] jrApache[3068: 20480] sent/avail/result 79/79/79
[Thu Dec 15 15:29:53 2011] [notice] jrApache[3068: 20480] read/len/total 4/4/4
[Thu Dec 15 15:29:53 2011] [notice] jrApache[3068: 20480] PROXY_GET_HEADER <- [11]
[Thu Dec 15 15:29:53 2011] [notice] jrApache[3068: 20480] read/len/total 4/4/4
[Thu Dec 15 15:29:53 2011] [notice] jrApache[3068: 20480] read/len/total 21/21/21
[Thu Dec 15 15:29:53 2011] [notice] jrApache[3068: 20480]     HTTP_X_REQUESTED_WITH: <null>
[Thu Dec 15 15:29:53 2011] [notice] jrApache[3068: 20480] sent/avail/result 4/4/4
[Thu Dec 15 15:34:53 2011] [notice] jrApache[3068: 20480] 67.206.10.197:51050 jrConnect [9]
[Thu Dec 15 15:34:53 2011] [notice] jrApache[3068: 20480] sent/avail/result 4/4/4
[Thu Dec 15 15:34:53 2011] [notice] jrApache[3068: 20480] 67.206.10.197:51050 is reachable
[Thu Dec 15 15:34:53 2011] [notice] jrApache[3068: 20480] sent/avail/result 4/4/4
[Thu Dec 15 15:34:53 2011] [notice] jrApache[3068: 20480] 67.206.10.197:51050 is reachable
[Thu Dec 15 15:34:53 2011] [notice] jrApache[3068: 20480] 67.206.10.197:51050 returned socket [9] to pool
[Thu Dec 15 15:34:53 2011] [notice] jrApache[3068: 20480] jrRecv [11] timeout but server reachable so recv again
[Thu Dec 15 15:36:33 2011] [notice] jrApache[3068: 20480] read/len/total 4/4/4
[Thu Dec 15 15:36:33 2011] [notice] jrApache[3068: 20480] PROXY_GET_REALPATH <- [11]
[Thu Dec 15 15:36:33 2011] [notice] jrApache[3068: 20480] read/len/total 4/4/4
What does this error mean: jrRecv [11] timeout but server reachable so recv again
Is the jrun apache connector retrying or waiting some more for the page response ? I dont want it to retry / wait beyond the recvTimeout that I have set. What can I do in the config or elsewhere so that the recvTimeout returns as a timeout to apache and cleint without recv again attempt that it appears to be doing?
Thanks in advance for any help on this.
JRunConfig RecvTimeout 300
        I want this setting so long running pages will time out and return after 300 s with a timeout error and return the error back to the client.
However, I see that the timeout is not working and long running cfm pages continue to cycle without returning. Upon enabling the verbose option I see the following error logged for the long running page after the timeout occurs, but the page does not return anything and continues to wait on the client side.

sunilr1 wrote:
Hi,
       I have set a recvTimeout for the JRUN apache connector using the
JRunConfig RecvTimeout 300
        I want this setting so long running pages will time out and return after 300 s with a timeout error and return the error back to the client.
That is not the setting to time out long-running pages and then return a message. Why would you want to control request timeouts from JRun anyway? I don't think it's a good idea.
RecvTimeout determines how long to wait before timing out a socket receive call on a JRun server. The receive call is generally a synchronous call on a socket on a JRun server. It will throw an exception if the time out period is exceeded. In other words, a long-running page does not necessarily imply a long wait on a socket receive call.

Weblogic Server 10.3.6, Forms 11.1.2, Sessions not timing out

On Weblogic Server 10.3.6, Forms 11.1.2, a Forms application contains a query that occasionally takes a long time to complete. Users of the application may close their browser before the query completes; however, their original session remains open consuming WebLogic process threads.
What information do I need to continue to debug?
How can I configure weblogic to recognize and kill the zombie threads generated by the conditions described above?

Hii,
No resources currently available in pool ePayBatchDS to allocate to applications.
This exception cleaarly shows the connection are not available to allocate to ePayBatchDS datasource.
As you said there are altogether 7 data source out which six are working and one is not.
In general if you are creating a datasource and providing a connection pool size we should consider the number of connection available or allowed at the database side as well.
Please cross check at the DB side the number of connection available and based on that try to tune the connection pool size in your data sources.
Regards,
Abdul

GPIB vi created with Instrument I/O assistant not timing out

I am new to Labview and I am trying to write a
program to control a HiPot tester via GPIB. This HiPot tester is used
on several other projects, so its GPIB address can vary. I want to use
Labview to scan for this device on the bus and then configure it.
I used the Instrument I/O Assistant to create a subVI that can query
the device for its manufacturer and model information. In this VI I
created some connectors that allow an outside program to input the bus
and device number. These numbers are formatted into a string and then
used to send commands to the GPIB device.
If I use this vi and specify the correct bus and device IDs for the
hipot tester, I get back the expected data. However if I send in the
wrong device ID (or wrong bus), the program hangs.
The Instrument I/O Assistant creates a timeout value of 2000 msec for
the operations. The *RST and *IDN? commands are sent first and then the
VI performs read operations to fill 128 bytes. So I figure that the
longest this should take to timeout is 2000*130 msec = 4.3 minutes. But
10 minutes later the VI is still running.
Why does this operation not timeout if the device and bus IDs on GPIB are not correct?
Brian Rose

Hi Brian
the first problem would appear to be that you send a reset command. But you only give the instrument
100ms to reset/reboot before your query its identify. If you have the instrument manual check to see actual timing
of bus etc.
As a rule of thumb I wait 300ms - If you run NI spy you will be able to see exactly when processes occur.
Add a sequence frame between reset command and id command.Place a
wait icon in the frame with a control on the input time so that you can
adjust time from front panel.
Initially set time to 400msand see what NI spy reveals.
Go for it
chow xseadog
Message Edited by xseadog on 09-10-2005 01:47 AM
Attachments:
wait.PNG ‏11 KB

Part of my Touch screen not working, out of warranty. Please Help

This just started a few days ago, I have been going crazy. I can't access a bar in the upper portion of the screen. I can't dial 4 5 6 buttons. I can't type a t in landscape mode keyboard. This is my second iphone, the first one I dropped once and the screen shattered. This one I have carried around like a newborn its entire life, scared to death I would drop it, I have treated it like gold and now this happens. I have seen on these forums, people getting these replaced for free at some apple stores, why isn't there a standard for this situation, some people get denied, some get a new phone. The closest apple store is 100 miles away, in Grand Rapids, MI, I have scheduled an appointment with a genius there this saturday. I have printed out the http://support.apple.com/kb/TS1827 article along with numerous threads showing people who have had success getting thier out of warranty iphone replaced because of this specific condition.

I can only offer my story. I bought a used 1st gen Iphone. PO had upgraded to 3G. After about 6 months for no reason my screen froze. Called Apple care and suggested I reboot, reinstall, etc.. None of it worked so AC suggested I go to the Apple Store and let them look at it. They told me they could replace w/a refurb @ $200.00, I could buy a new 3G @ $400.00, or I could get a third party to repair it. I mentioned to the Apple guy about the reports of the screen going dead on some phones and he said my phone fell outside the serial numbers that were affected. A little upset, I called AC again and just pushed a little more. I told the guy since it was a mnufacturers defect but my phone was out of warranty I would go half on a refurb at $100.00. He said wait a minute, came back had me send my phone to them and they sent me a replacement phone free. Talk nice to the guys and they will try to help. I said so what I have here now is a very expensive paper weight, is that right? That's when I said I'd go halves on a refurb. I guess they took pity on me. Hope it works out for you.

Socket not timing out - if network is disabled

Hi All,
I am using java.net.Socket to connect to a TCP/IP server. And using timeout in case of non-activity between the server-client.
This is the code I use to transfer data...
out = new BufferedWriter(new OutputStreamWriter (
sckt.getOutputStream()));
in = new BufferedReader(new InputStreamReader(
sck.getInputStream()));
out.write(msg); //char[]
out.flush();
while (! in.ready());Now the server is slow in responding so I have to wait on in.ready() but meanwhile if I disable the network manually... the reader will keep waiting and Socket timeout doesnot take place atall... let me know whats wrong with this idea ....
thanks a lot,
Ri

If you mean pull the wire out of the back of a PC
running Win2k (and quite possibly other Windows and
quite possible other OS) then various things seem to
go wrong at random, including but not limited to some
but not all threads hanging, the application
terminating without any message, and so on.It most assuredly does not do that on solaris.
And I strongly suspect that if the application is code correctly (as the ones that I tested using that on solaris) then it won't happen on windows either. I can't imagine anyway in which a thread will hang when a network cable is pulled, unless of course the thread is blocking indefinitely on a socket. But that happens on any system, since that is the defined behavior of a socket.

Dequeue timeout NOT timing out

Hi, we have an application that uses the pure JDBC drivers and the AQ api to dequeue messages off an 8.1.7.2 queue with object payloads. We user navigation next message and the queue properties are:
owner : QUEUEMGR
name : FXD_QUEUE
queue table : FXD_MSG_QUEUE
[AQQueueProperty]
type : NORMAL
max_retries : 0
retry_interval : 0.0
retention_time : 0.0
dep_tracking : false
comment : null
auto_commit : true
Payload type : OBJECT
Users enqueue messages through a stored procedure, which after calling enqueue it goes into a loop checking the queue table for the existence of that message every few ms. If the message does not leave the queue within 5 seconds, an error is thrown to the user. We are experiencing a problem with the queue in that sometimes the dequeue call would block for a very long time (1, 2 even 4 minutes) as if there were no messages, while on the same time users where getting errors thrown as they were enqueueing messages that were not received within 5 seconds. We tried to work around that by setting the dequeue timeout to 2 seconds, hoping that unblocking and calling dequeue again would work, and we added very verbose logging to know exactly where the time is spent.
While normally our log file looks like:
[Wed Sep 11 15:07:17 GMT+03:00 2002],Informative,OracleAQRetriever: Dequeue timeout due to inactivity.
[Wed Sep 11 15:07:17 GMT+03:00 2002],Informative,Calling blocking dequeue on AQ Api
[Wed Sep 11 15:07:19 GMT+03:00 2002],Informative,OracleAQRetriever: Dequeue timeout due to inactivity.
[Wed Sep 11 15:07:19 GMT+03:00 2002],Informative,Calling blocking dequeue on AQ Api
[Wed Sep 11 15:07:21 GMT+03:00 2002],Informative,OracleAQRetriever: Dequeue timeout due to inactivity.
[Wed Sep 11 15:07:21 GMT+03:00 2002],Informative,Calling blocking dequeue on AQ Api
[Wed Sep 11 15:07:23 GMT+03:00 2002],Informative,OracleAQRetriever: Dequeue timeout due to inactivity.
[Wed Sep 11 15:07:23 GMT+03:00 2002],Informative,Calling blocking dequeue on AQ Api
[Wed Sep 11 15:07:25 GMT+03:00 2002],Informative,Blocking dequeue returned message
[Wed Sep 11 15:07:25 GMT+03:00 2002],Informative,OracleAQRetriever: processing msg from dequeue call
At random intervals we get :
[Wed Sep 11 15:07:43 GMT+03:00 2002],Informative,OracleAQRetriever: Dequeue timeout due to inactivity.
[Wed Sep 11 15:07:43 GMT+03:00 2002],Informative,Calling blocking dequeue on AQ Api
[Wed Sep 11 15:08:56 GMT+03:00 2002],Informative,Blocking dequeue returned message
[Wed Sep 11 15:08:56 GMT+03:00 2002],Informative,OracleAQRetriever: processing msg from dequeue call
which means that now we called dequeue at 15:07:43, there was a meesage so there was no reason to timeout. The method returned over a minute
later with a message.
Is there anything that could be causing it not to timeout every 2 seconds?
Is there anything that could be causing it not to dequeue the message immediately but with a huge delay?
Kind regards,
alex

Hi,
While de-queing the dequeue session does not refresh after every dequeue.The message list is read only once i.e during the first dequeue call of the session.If the first dequeue call sees only 3 messages it would dequeue only 3 messages even if more messages are added(through enqueue) after the first dequeue.
To overcome this you can set dbms_aq.dequeue_options_t 's navigation property to DBMS_AQ.FIRST_MESSAGE(the default is dbms_aq.next_message) before every call to dequeue is made.
loop
set the property to first message
dequeue
end loop
Thanks
Gautham C
[email protected]

I cant download the latest software update I get 652.7 or 652.8 of file then I get an err=-3259 it says I have timed out and I have not!

Does anyone have an issue downloading the latest iPhone update. I get 652.7 of 652.8 of the file and then an err=-3259 and it says i have timed out. I know I have not timed out though any help?

Temporarily disable ALL of your antivirus/antispyware software (that includes the included MicroSoft software and any other installed software such as Kaspersky, McAfee, etc.) and try again.

Folio packaged on PC and moved to OSX: Folio Builder timing out.

Please help!
I have an Indesign file that we have created on a windows 8 PC running Indesign CC. We are now getting to the part that requires an apple computer to complete the final publishing steps so I packaged the file/resources on the PC and transferred the packed folder to a brand new IMac.
Again using Indesign CC, I have the file open on the mac and all the links etc look fine. When I run the folio builder however, it is BRUTALLY slow. On the pc which is a much slower computer it takes maybe 5-10 mins to run but on the new mac it will take an hour+ and when it finally drops the loading screen it seems to just time itself out and does not show that a folio has been uploaded. Its not timing out on the actual internet upload part, I'm familiar with that error but thats no problem, its timing out on the processing of the folio pngs I guess.
Notes: The file is very heavy on the dps effects, lots of slideshows, tons of object states, few videos, etc. Its using linked PS files for every object state so the actual packaged folder is a little over 3 GB. Obviously the compiled app itself is nowhere near that, but it IS a lot of data. Still, it works perfectly on the PC so something is wrong here. Brand new imac so its not a power issue. I have tested another mac as well so its not a bad computer. It WILL run the folio builder if I drop all but a few object states although it still takes far far longer to run than it does on the PC. I have tried changing the default image type to pdf instead of png and got the same issue.
Looking for any clues here.
Thank you.

If you’re creating a single edition app through CC, you’ll need to open InDesign and sign into Folio Builder with the same ID.
Choose the folio and then create app. The app is created from the folio in the cloud, not the InDesign files you installed.
If you have a pro or enterprise account, then yes, just open the app builder on the Mac and go to it.

Screen not timing out

Similar Messages

Maybe you are looking for