Screen now has a yellow tinge...

Last night I started up my G5. I clicked on mail and while moving the arrow to select an email my screen changed to a yellowish tinge. My computer works fine otherwise. I have tried fixing it in preferences, with no luck. Have I clicked on something that I should not have??
Thanks in advance!

Cathy Johnstone-
My apologies. Your cable would be inside. This forum is for Power Mac G5 computers of the tower variety. There is another forum for user's of iMac G5 computers.
However, check here: http://www.apple.com/support/imac/repairextensionprogram/ to see if your machine was covered under this plan.
Luck-
-DaddyPaycheck

Similar Messages

  • Iphone 3GS Screen Has A Yellow Tinge Help

    Hi
    I looked at my iphone today and it looked a bit yellowish and i compared it to my friends one and it was clear and my one has a yellow tinge to it and im wondering how it could of got their or how do i get rid of it
    Hopefully someone will manage to tell me how as i want a clear screen not a yellow one hehe
    Thanks

    Hi
    Oh ok dont like that lol does it really matter or

  • My screen has a yellow tinge and my screen quivers when I'm on the web

    My phone has a yellow tinge and it quivers when Im on the web

    My QUESTION is why does my IPhone 4S have yellow lines, shading on my screen and WHY does my iPhone 4s screen jitter, shakes, vibrate etc. when I am using the Internet, web pages, websites etc.????????????????

  • Has anyone noticed that their iPhone 5 has a yellow tinged display?

    Has anyone noticed that their iPhone 5 has a yellow tinged display and the colours look too intense? Just does not look right.

    Correction - I HAVE reported the fault to Apple and to my network provider who have informed me that they have received numerous complaints from their customers and are sending out replacements to them and to me. As I hadn't stated what steps I had taken in my original post you shouldn't be so fast to assume what I have or have not done.
    Thank you and goodbye.

  • I was using my iPhone 5 and the screen now has black

    I was using my iPhone 5 and my screen now has black and white lines on it. I'm unable to do anything on it. Any suggestions please?

    Sounds like you'll have to take it in to the Apple store for service. This happened to my wife's iPhone and they just replaced it.

  • 20" display screen now has black border

    My screen suddenly has about a 2" border of black on each side and a 1" black border on top and bottom. Toolbar, desktop picture, etc. all show up as normal. However, I am only able to use about 60% of the screen. In some apps such as Quicken, I can't reach the sizer because the bottom of checkbook register is now in the black part. May not even be a prob. w/the display, because altho the screen of the PC itself has no black border, the images in some apps are cropped as described above. I have tried changing display preferences and black border remains. Ideas/solutions will be v. much appreciated.

    Sounds like you'll have to take it in to the Apple store for service. This happened to my wife's iPhone and they just replaced it.

  • Will apple swap in my black iphone 4s for a white one? Considering my screen also has the "yellow tint"

    I have a black iphone 4s in mint condition and the screen bugs me as it has a yellow tint. I am wondering if i could swap it for a white one, and if so how much would it cost? Thanks .

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

  • I dropped my mac book pro and the screen now has black and coloured lines in the corner. what is it and how can i fix it?

    I dropped my mac book pro and the screen has now got a black rectangle and pink and green lines down it. What is it and how do i fix it?

    Sounds like the display got damaged. Connect an external display and see if that's OK. If that's OK then the display is probably damaged. You can try reseating the LVDS connector but if that doesn't help the connections on the display body are very difficult to get to. Apple would just replace the entire display and that's what I would do as well.

  • HT201412 Why can't I get my iPad to go past the apple logo? The screen now has crazy lines all over it. Can't restore cause computer doesn't recognize it in device list.

    When I was updating iPad 2 to newest iOS I interrupted the update by doing a reset. Now I can't do anything. Won't even show up as device on my computer so I can do a restore. Worked perfectly before I tried to do the update. I thought the update was messing up cause it seemed frozen about 1/4 way on the line that advances when you do an update. I held down home and power buttons for about 10 seconds and now there are colored lines and such moving across the screen. Can't do a restore from backup cause device not recognized. Other iPads are recognized so it's clearly the particular iPad that has the problem. What can I do?

    Try and force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Ipad mini froze during ios 8.3 can't do anything frozen on apple screen now has white background and black apple can anyone help

    I have an ipad mini ran the ios 8.3 update all going fine then on the last part it decided to freeze on the apple logo screen.  The screen has changed colour, the screen is white and the apple logo is black now.  I cannot do anything with it, I tried to restore through iTunes but nothing happens.  I tried to connect to iTunes holding down the home key but that didn't work.  Anyone have any other suggestions.

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • IMac won't boot past white screen, now has partial pixelation?

    I have just tried to restart my 2011 iMac and it has become stuck on the initial white screen (before the grey spinning gear) prior to the reboot it had being running fine for about 4 hours.
    I initially thought that it may be trying to boot from the scratched PS2 game I had in the drive (was experimenting with PCSX2 before the reboot) I have tried every button combination I can find to eject the disk or boot into a different OS, I have also tried resetting the SMC and PRAM (I didn't get the 2nd beep) but to no avail. I have also taken out the extra 4gb of memory I installed to go back to the stock 4gb and swapped the stock 4gb for the new RAM but this hasn't helped either.
    I have also noticed there is a small line of pixelation at the bottom of the screen, the high of it varies but it is usually around 4 pixels high, some of them are random colours but most of them are black, does this mean the graphics card has gone?

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Iphone screen now has a boarder of "dead" pixles help

    my ipone 3gs is working fine but the visable screen has shrunk so there is a 1mm frame of dead pixles surrounding the display .
    does any one else have this problem or better still know how to fix it?

    If no change after the standard troubleshooting steps which in order are power your iPhone off and on, an iPhone reset, restoring your iPhone with iTunes from your iPhone's backup, and restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, more than likely your iPhone has a hardware failure. The iPhone includes a one year warranty. You can call AppleCare, or make an appointment at an Apple store if there is one nearby, or the carrier for your iPhone may handle iPhone warranty claims.

  • Recently dropped i phone 4 down the toilet, screen now has vertical lines on when i fire up??

    I recently accidently dropped my iphone down the toilet, within seconds i retrieved but it shut down, i put in a tub with riceand left for at least 24 hrs, although i turned on and still seemed to have some moisture as the camera lens showed water in it, the screen then came on with a thick white line down the centre, I am assuming this is the white apple sign which comes on when started up, then this cahnged to just a full screen of vertical black lines (like a barcode).  I had a passlock on the phone which i managed to unlock as it appears that everything is working behind the screen, just hoping its just an LCD problem and maybe a new screen but dont want to wast my money if not going to work??? I have upgraded and now have an Iphone 5s. I am gutted as there wasnt a mark on the iphone4 and would love to be able to have it fully functional again, any help would be appreciated...

    Replacing the LCD alone won't cut it. The internal electronic components got wet and you powered the iPhone back on while the internal components were still wet. 24 hours wasn't near enough time.

  • Suddenly my entire screen now has little dots on it that flash back and forth between pink and blue. What's up?

    I was online (on Facebook) when suddenly my coputer screen developed these little dots--uniform across it not just in a browser window--and they started flashing back and forth between blue and pink. The computer froze up and I had to reboot. It hasn't gone away and it's terribly annoying. What should I try to do?

    It may be a problem with your video electronics - possibly heat related. Shutdown the PB & leave it overnight. Then startup & see if the dots appear.
     Cheers, Tom

  • My macbook PRO early-2011 was dropped and the cover of the screen now has a bump, is there a way to repair or change the cover? if so, what would the cost be?

    Also the cover under the notebook is screwed up, anyways the unibody is fine but both covers are pretty much damaged, anyway tho change those?

    Let's start by highlighting the fact that this repair will not be covered by any form of Apple warranty. That being said, you can check in places like www.powerbookmedic.com or www.ifixit.com for parts prices as a reference. You will have to change the entire lid, with all its guts, but the replacemente procedure is of medium to easy level of difficulty; basically you're disconnecting the cables and unscrewing the lid off.
    Note that you can opt for new or used replacement parts.

Maybe you are looking for

  • Problem in using JFileChooser

    Hi all i m using JFile chooser here is the code:(at class level) private JFileChooser fileChooser = new JFileChooser(){ protected void fireActionPerformed(String command) { if (command != null && command.equals(JFileChooser.APPROVE_SELECTION)) { supe

  • Currency local is not correct and USD is correct

    Hi One of the user facing issue with currency, when fetches from excel adins, where usd is correct and local not. How to troubleshoot issue? Thanks

  • Interpreting vmstat -i

    Hello, I am trying to optimize network traffic on our firewall with multiple interfaces. I am trying to understand the output of vmstat -i and what it means. Here is a sample output: $ vmstat -i interrupt total rate clock 741511658 100 qfec0 82563472

  • Assigning table name explicitly

    is it possible to get the table name from the user instead of hard-coding it in the pl/sql block itself? will it cause any dependency problems? if yes, then how should i proceed? thanks in advance karthik.J

  • Mouse unable to click/drag when in Mac applications

    I'm having trouble with my mouse - I am unable to drag any icons or files withing Mac applications (iPhoto, iTunes, Mail, Desktop), although my mouse seems to be working fine otherwise. For example, I can click and drag to crop a photo in iPhoto, but