Screen on my macbook 13" won't stay on. It just flashes once and goes off.

I've tried everything but nothing seems to work. I have a new Display inverter but the problem is not solved. What happens is that when i turn it on the display flashes once and then it goes black. When i hit the display's intensity bottoms it just flashes but won't stay on. Any suggestions? please! i can't find any apple technician around here as this is a very (very) small town. Help!

I've tried everything but nothing seems to work. I have a new Display inverter but the problem is not solved. What happens is that when i turn it on the display flashes once and then it goes black. When i hit the display's intensity bottoms it just flashes but won't stay on. Any suggestions? please! i can't find any apple technician around here as this is a very (very) small town. Help!

Similar Messages

  • My macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on.

    my macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on. i don't know how to get it to progress past this loading page.

    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    If you are not using Lion, Mountain Lion, or Mavericks then use the following procedure:
    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • My labeled files on my macbook pro won't stay colored

    my labeled files on my macbook pro won't stay colored

    Ok, in theory you cannot lock the hard drive, so, run Disk Utlities, First Aid, Repair Hard Drive again.  It should come back with a message that all is OK.  Then run Repair Permissions.  That often returns a lot of messages that are not actually problems, just grumbling by the system.
    Then try a normal restart by clicking the apple left side of the menu bar, Restart.  If you restart normally all is fine.
    If not, then restart on the recovery HD again and try an Install Mac OS X and see if that succeeds this time.

  • MacBook Pro won't stay asleep with external monitor attached.  When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.

    MacBook Pro won't stay asleep with external monitor attached.  When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.  This only happens when using the external monitor. Does anyone have any suggestions?

    Mine does that too. The worst thing is when it goes to sleep, then wakes up and keeps running while the lid is closed and it is wrapped up in a case. I am afraid when the hot weather comes it is going to burn up. I am hoping Apple fixes it in the software or they may have a melted MBP to replace.
    Then when I open the lid it is crashed running at fill tilt, pumping out heat to beat the band. I am forced to hold the button down and reboot.
    I wiped my hard disk and reinstalled my OS, but it didn't help. I reversed my OS to 10.5.0 and it solved the DVI problem but still won't sleep. This post will probably be deleted by Apple, they did it a few days ago. I just don't know what to do, and I consider myself a real Apple expert. Just hoping you realize you are not the only one.

  • `my macBook Pro won't start up. Just get that gray blueshy kind of screen and don't go nowhere.

    My MacBook Pro won't start up. Just get that gray, blueishy screen and don't go on.

    Try a safe boot.
    http://support.apple.com/kb/TS2570
    This boot takes longer than a normal boot, be patient. If it boots login, and see if it seems normal. If so, logout and reboot normal.

  • My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

    hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
    I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
    (i correctly got out of dfu mode after the downgrade)
    i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
    i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

    Anyone have any suggestions? or is everyone else just as clueless as me !

  • How can I fix my App Store on my iPod. When I go to the App Store and click on updates then click on purchased it won't load up the purchased apps. It says its loading then it flashes black and goes to my home screen. How can I fix it

    My iPod has a glitch in the App Store. When I go to the App Store and click on updates then click on purchased it won't load up my purchased apps it says it is loading then it flashes black and goes to my home screen. How can I fix it??

    Have you udated to iOS 6.0.1?
    Otherwise
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • TS1627 iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

    Just got a new iPhone 5 and now iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

    Hi Jetjuice!
    I have an article that can help you troubleshoot this issue a little further and can provide you with some more steps to take in attempting to resolve this issue:
    Sync Services: Advanced troubleshooting for contact and calendar syncing
    http://support.apple.com/kb/ts2481
    That article has an extensive list of steps to perform in attempting to get the calendar to sync again, and those steps should help you resolve the issue. Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • TROUBLE MOVING CONTACTS FROM ONE GROUP , TO OTHER (APPLE ADDRESS BOOK) WHEN I TRY TO DRAG IT WON'T STAY . WHERE SHOULD I BE , AND HOW DO I DRAG ???? AND RELEASE

    TROUBLE MOVING CONTACTS FROM ONE GROUP , , TO OTHER (APPLE ADDRESS BOOK) WHEN I TRY TO DRAG IT WON'T STAY . WHERE SHOULD I BE , AND HOW DO I DRAG ???? AND RELEASE   AB

    I have many different mailaccounts and different groups of contacts on my ipad and iphone. Sometimes i made the mistake when i create a new account linking it with the standard account. How it is possible to move one account to an other group?

  • When I turn on a video the screen on my MacBook Pro freezes.  I've been through Apple Care and they couldn't fix the computer.  I think the fan and the graphics are the problems

    When I turn on a video the screen on my MacBook Pro freezes.  I've been through Apple Care and they couldn't fix the computer.  I think the fan and the graphics are the problems.  I can restart after two attempts.  Sometimes I use SAFEBOOT

    Please advise the model MBP you have and the OSX you have installed.
    Also try a SMC reset:
    http://support.apple.com/kb/ht3964
    Ciao.

  • My MacBook doesn't turn on, after the sound and start white sign it starts loading something and goes off again and again and doesn't turn on .

    My macbook stopped all of a sudden soon after i tried to restart it . Now it doesn't turn on it shows  white screen with apple when you start your mac and starts loading something down that white screen and goes off . I tried thrice its still same and it's now turning on now .

    Try SMC and PRAM resets:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/ht1379
    What is the EXACT model MBP that you have and what OSX do you have installed?
    Ciao.

  • My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours and

    My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours hoping it would reload and work.  No luck.

    Hello KCC4ME,
    You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/HT1564
    If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
    OS X Mavericks: If you think you have incompatible login items
    http://support.apple.com/kb/PH14201
    Cheers,
    Allen

  • My Macbook Pro Stops running as normal, when it is not connected to the charger. Once it goes off the plug, it slows down to a point where it is not usable.

    My Macbook Pro Stops running as normal, when it is not connected to the charger. Once it goes off the plug, it slows down to a point where it is not usable. is there any fix to this?

    https://support.apple.com/kb/HT3964

  • Yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

    yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

    Are the lines like psychedelic herringbone?  If yes, I had that happen once, it was something serious, like the
    Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP.  I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
    Good luck and don't panic.

  • My Macbook Air won't stay on

    I received a new Macbook Air for christmas and trtied to use tonight but it wont work. I press the on button, the keys light up, an arrow comes up on the screen and then within seconds it goes off. Can anyone help?

    First, I would confirm that your charger is properly connected.  You should see an orange or green light on the plug when it is connected to the Air.  Try to power up with the power connected.
    Otherwise, it might be in your best interest to make an appointment at the Genius bar at your local store.  If it is new out of the box, then you should be able to get support from them.

Maybe you are looking for

  • Mavericks 10.9.1 Issues!

    Hello, I installed the update to OS X 10.9.1 and ran into problems: opening the Mail app took me more than ten attempts, where the app would crash due to some proble with "Open CL". Same with Messages. After restarting, the desktop started flashing b

  • Exclude the currency in F110

    Hi SAP Gurus, Is it possible to exclude the currencies at the time of doing F110 without changing in the configuration level. Please help me for the above issue. Thanks in Advance. Regards Vinu

  • File dir in jdev

    hi all i have an .xml file in my adf application . it located at view--->backing----->myfile.xml i try to read som data from it but always i get exception file not found , so how to refer to the file location in this case. thnx

  • Find character styles

    Hi, How to find character styles through javascript

  • Going Crazy! How to force startup using firewire drive on G3

    Okay, I think I'm going crazy. I have searched last night and today for my answers and still no solution. I have an old G3 I'm trying to install Tiger on. I don't have a dvd drive in the G3, so I installed onto a firewire drive from my G4. I booted f