Screen out put out of range

I am getting a "screen output out of range" change settings etc etc message every few days witha reduced size screen. I have to reboot the computer to get a "normal" screen . I am on a Apple mini mac with an hp2009m monitor.

Hello @kpskhalsa,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your monitor indicates that the screen is out of range when connected to your Macintosh computer, and I would be happy to assist you in this matter!
According to this document on using HP Monitors on a Mac: 
"HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
I hope this helps!
Best Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!

    I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!

    Hello 74birdy
    The article below will assist with troubleshooting your iPhone not responding.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Need to update out put tax classifcation code for a range of items in Orac

    Hi,
    I need to update out put tax code for a range of items in Oracle EBS. At the moment we update tax code for individual items manually ubder invoice tab. Is there a better way to do this.
    Regards

    Where can I find the mtl_system_items_interface table?Under INV schema.
    R12 -- INV.MTL_SYSTEM_ITEMS_INTERFACE
    http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=MTL_SYSTEM_ITEMS_INTERFACE&c_owner=INV&c_type=TABLE
    11i -- INV.MTL_SYSTEM_ITEMS_INTERFACE
    http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=MTL_SYSTEM_ITEMS_INTERFACE&c_owner=INV&c_type=TABLE
    Thanks,
    Hussein

  • How to add push buttons in out put screen of ALV

    Hai,
    How to add push buttons in out put screen of ALV (tool bar) with out using classes or methods .I want to know using normal ALV .
    Thanks in advance .
    kiran

    Hi Kiran,
    Here is the sample code.If you are using reuse_alv_grid_display, no need to write code in PBO.
    Just double click the 'TEST' which is written in code.Then create a GUI Status.In Application toolbar,type the name of the button you want(say BUTTON).Then double click that name.Then enter the ICON name and function text.Activate it.This itself will work.If you want all the functionalities,then try to do as Vinod told.
    TYPE-POOLS: slis.
    DATA: i_qmel LIKE qmel OCCURS 0.
    data v_repid type repid.
    SELECT * FROM qmel INTO TABLE i_qmel.
    v_repid = sy-repid.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
       I_CALLBACK_PROGRAM                = v_repid
       I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
       I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
       i_structure_name                  = 'QMEL'
      TABLES
        t_outtab                          = i_qmel
      EXCEPTIONS
        program_error                     = 1
        OTHERS                            = 2.
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    form set_pf_status using rt_extab type slis_t_extab.
    set pf-status '<b>TEST</b>'.
    endform.
    FORM user_command USING ucomm LIKE sy-ucomm
                             selfield TYPE slis_selfield.
    data lv_ucomm type sy-ucomm.
    lv_ucomm
    = sy-ucomm.                                        
      CASE lv_ucomm.
        WHEN 'BUTTON'.                              "Double Click line Item
          call transaction 'MM01'.
      endcase.
    endform.

  • How to give F4 Help for out put screen

    Hi ,
    I have out put grid display which is editable , in that i want to give F4 help for one of the eidtable field. if any body know about this please me .
    My problem is i need to add F4 for my out put screen.
    Thanks ,
    saleem.

    Check the following code it may hel u.
    REPORT ABC.
    DATA : BEGIN OF ITAB OCCURS 0,
    UNAME LIKE USR01-BNAME,
    END OF ITAB.
    data : RETURN_TAB LIKE DDSHRETVAL occurs 0 .
    data : RETURN_wa LIKE DDSHRETVAL .
    PARAMETERS : A(12) TYPE C.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR A.
    ITAB-UNAME = 'U01'. APPEND ITAB.
    ITAB-UNAME = 'U02'. APPEND ITAB.
    ITAB-UNAME = 'U03'. APPEND ITAB.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE = ' '
    retfield = 'ITAB-UNAME'
    PVALKEY = ' '
    DYNPPROG = SY-REPID
    DYNPNR = SY-DYNNR
    DYNPROFIELD = 'A'
    STEPL = 0
    WINDOW_TITLE =
    VALUE = ' '
    VALUE_ORG = 'S'
    MULTIPLE_CHOICE = ' '
    DISPLAY = ' '
    CALLBACK_PROGRAM = ' '
    CALLBACK_FORM = ' '
    MARK_TAB =
    IMPORTING
    USER_RESET =
    tables
    value_tab = ITAB
    FIELD_TAB = FTAB
    RETURN_TAB = return_tab
    DYNPFLD_MAPPING =
    EXCEPTIONS
    PARAMETER_ERROR = 1
    NO_VALUES_FOUND = 2
    OTHERS = 3
    Regards

  • How can we get date period in out put screen as a header (PLS Urgent)

    Hi frdz,
    In ad hoc reports client want to get date field in out put screen as per selection screen date priod.
    Kindly let me know how can we get the same.
    EX: My report selection peiod is 01.01.2006 to 31.12.2006
    The same above date I want to get in out field screen header.
    Thanks,
    $ Lakshmi
    Message was edited by:
            Lakshmi

    see if this link helps http://support.apple.com/kb/ht1212
    you will probably have to restore the iphone as new.

  • Reports / intranet/ In some detail,  the user will input a date range from and 2 and will out put the records in the int

    Hello there,
    I am totally green in web development.
    my goal is to, for the user will input a date range from and
    to and will out put the records in the intranet when they press a
    button.
    However, the good news is: I have experience in programming.
    I have written applications for desktop in VB>NET and I
    understand RDBMS /sql concepts .
    But CF and WEB development is new to me.
    My current projects involves in connecting to DB and testing
    it. (it works fine)
    And outputting reports by to a intranet page. (records)
    i need help on how to start this asap. I will even do some
    practice at home.
    Tools I have at work
    • Development server(test)
    • Home site.
    • Toad for db connection.
    • Html reference guide
    • Cf dummies book.
    How can start my projects.
    (ex. Create cf, outputpage?)
    seriously, I am new to this.
    Thanks.

    Well, I had a really nice response with some concepts and
    ideas for you to practise on etc, but these dumb forums timed out
    and I lost it all
    If you want to pop me an email we could probably do a few
    exercises together that way - or even by MSN Messenger if you want.

  • Need to filter the out put of iw38 reprort

    hello Experts,
    i have requirement like need to filter the out put of iw38 report and after that again i need to filter that output by using department and client code and oreder .ned to show out put with 3 push buttons .
    dertails:
    selection screen fields:
    region
    customer  code
    oreder
    date range
    from these 4 fields i need to pass two(order and date range)   fields to  iw38 report and then what ever output i am getting again that should filter by customer code and region which are there in my program
    , need to display the out put with 3 push buttons .
    plz suggest me  with appraoach and sample code .
    Note : i am using using submit and return export memory but its directly showing iw38 output and not coming back.

    Hi ananta,
    The function module LIST_FROM_MEMORY loads the list from the ABAP Memory to an internal table of the row type ABAPLIST.
    The function module WRITE_LIST inserts the content of an internal table of the row type ABAPLIST in the current list.
    The function module DISPLAY_LIST displays the content of an internal table of the row type ABAPLIST in a separate list screen.
    check the below program..
    REPORT  Z642_TEST2.
    DATA list_tab TYPE TABLE OF abaplist.
    SUBMIT riaufk20 EXPORTING LIST TO MEMORY
                                    AND RETURN.
    CALL FUNCTION 'LIST_FROM_MEMORY'
      TABLES
        listobject = list_tab
      EXCEPTIONS
        not_found  = 1
        OTHERS     = 2.
    IF sy-subrc = 0.
      CALL FUNCTION 'WRITE_LIST'
        TABLES
          listobject = list_tab.
    ENDIF.
    write: ' This is calling program', sy-repid.
    Edited by: Rammohan Nagam on Apr 8, 2009 4:05 PM

  • How to get default lay out set in my ALV out put.

    I need to have default layout in my ALV output.
    My functional consultant idea was to make sure they have an ALV variant selected. 
    When he first run the program, how will need to  get a "/DEFAULT" variant created.
    How can I do that ?
    Initialization - For ALV variant
    INITIALIZATION.
      ws_repid = sy-repid.
      g_save  = 'A'.
      CLEAR g_variant.
      g_variant-report = ws_repid.
    Get default variant.
      gx_variant  = g_variant.
      gx_variant = g_variant.
      CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
        EXPORTING
          i_save     = g_save
        CHANGING
          cs_variant = gx_variant
        EXCEPTIONS
          not_found  = 2.
      IF sy-subrc = 0.
        p_vari = gx_variant-variant.
      ENDIF.
    &--F4 HELP - FOR ALV VARIANT GET--
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
          EXPORTING
            is_variant = g_variant
            i_save     = g_save
          IMPORTING
            e_exit     = g_exit
            es_variant = gx_variant
          EXCEPTIONS
            not_found  = 2.
        IF sy-subrc = 2.
          MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ELSE.
          IF g_exit = space.
            p_vari = gx_variant-variant.
          ENDIF.
       ENDIF.
    &--AT SELECTION-SCREEN.- For ALV Variant--
    AT SELECTION-SCREEN.
    *Getting variant Existence
      PERFORM get_exist_variant.
    *&      Form  GET_EXIST_VARIANT                                        *
          text                                                           *
    FORM get_exist_variant .
      IF NOT p_vari IS INITIAL.
        MOVE g_variant TO gx_variant.
        MOVE p_vari TO gx_variant-variant.
        CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
          EXPORTING
            i_save     = g_save
          CHANGING
            cs_variant = gx_variant.
        g_variant = gx_variant.
      ELSE.
        CLEAR g_variant.
        g_variant-report = ws_repid.
      ENDIF.
    ENDFORM.                    " GET_EXIST_VARIANT
    *&      Form  alv_display                                              *
    This subroutine is to display the out put in ALV.                    *
    FORM alv_display .
    Local data
      DATA: y_x          LIKE boole  VALUE 'X'.
      DATA: lh_index     LIKE lf_fieldcat-col_pos.
    For variant
    DATA: ws_repid LIKE sy-repid,
          g_save TYPE c VALUE 'A',
          g_exit TYPE c,
          g_variant LIKE disvariant,
          gx_variant LIKE disvariant.
      For 1st field.( RPT_LOC )
        CLEAR lf_fieldcat.
        lf_fieldcat-fieldname = 'RPT_LOC'.
        lf_fieldcat-tabname = 'GT_ZGXMIT_L'.
        lf_fieldcat-ref_tabname = 'ZGXMIT'.
        lf_fieldcat-ref_fieldname = 'RPT_LOC'.
        lh_index = lh_index + 1.
        lf_fieldcat-col_pos = lh_index.
        lf_fieldcat-key = y_x.
        lf_fieldcat-no_sum = y_x.
        APPEND lf_fieldcat TO lt_fieldcat.
    For 2nd field.( BAL_XMIT )
        CLEAR lf_fieldcat.
        lf_fieldcat-fieldname = 'BAL_XMIT'.
        lf_fieldcat-tabname = 'GT_ZGXMIT_L'.
        lf_fieldcat-ref_tabname = 'ZGXMIT'.
        lf_fieldcat-ref_fieldname = 'BAL_XMIT'.
        lh_index = lh_index + 1.
        lf_fieldcat-col_pos = lh_index.
        lf_fieldcat-key = y_x.
        lf_fieldcat-no_sum = y_x.
        APPEND lf_fieldcat TO lt_fieldcat.
    4,5,....fields appening
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
            i_callback_program                = ws_repid
          I_CALLBACK_PF_STATUS_SET          = ' '
           i_callback_user_command           = 'USER_COMMAND'
          I_CALLBACK_TOP_OF_PAGE            = ' '
          I_STRUCTURE_NAME                  =
          I_BACKGROUND_ID                   = ' '
          I_GRID_TITLE                      =
          I_GRID_SETTINGS                   =
          IS_LAYOUT                         = v_alv_layout
           it_fieldcat                       = lt_fieldcat
          IT_SORT                           =
          IT_FILTER                         =
          IS_SEL_HIDE                       =
          I_DEFAULT                         = 'X'
           i_save                            = 'A'
          IS_VARIANT                        =
           it_events                         = events[]
          IT_EVENT_EXIT                     =
          IS_PRINT                          =
          IS_REPREP_ID                      =
           TABLES
                t_outtab                 = gt_zgxmit_l
           EXCEPTIONS
                program_error            = 1
                OTHERS                   = 2.
        IF sy-subrc <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    ENDFORM.                    " alv_display

    Hello SAm,
    U have to set like   DATA: IT_VARIANT LIKE DISVARIANT,
            G_S_SORT  LIKE LINE OF IT_SORT.
      DATA : G_R_DISP_VARIANT TYPE DISVARIANT.
      SORT G_T_OUTTAB BY PSPID POSID.
      CLEAR: G_R_DISP_VARIANT.
    For storing the variant layout
      IT_VARIANT-REPORT  = SY-REPID.
      IF NOT P_VARIAN IS INITIAL.
        G_R_DISP_VARIANT-VARIANT = P_VARIAN.
      ELSE.
        IT_VARIANT-VARIANT = '/Z48M'.
      ENDIF.
      CLEAR G_T_OUTTAB.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                I_CALLBACK_PROGRAM = IT_VARIANT-REPORT
                I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
                IT_FIELDCAT        = IT_FIELDCAT
                I_SAVE             = 'A'
                IS_VARIANT         = IT_VARIANT
               IS_LAYOUT          = IT_LAYOUT
                IT_SORT            = IT_SORT[]
           TABLES
                T_OUTTAB           = G_T_OUTTAB
           EXCEPTIONS
                PROGRAM_ERROR      = 1
                OTHERS             = 2.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    If u want F4 help in the selection screen then do like this.
    SELECTION-SCREEN BEGIN OF BLOCK VARIANT WITH FRAME TITLE TEXT-013.
    PARAMETERS:  P_VARIAN LIKE DISVARIANT-VARIANT DEFAULT '/STANDARD'.
    SELECTION-SCREEN END OF BLOCK VARIANT.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARIAN.
      PERFORM SHOW_EXISTING_DISPLAY_VARIANTS.
    FORM SHOW_EXISTING_DISPLAY_VARIANTS.
      DATA: G_R_DISP_VARIANT TYPE DISVARIANT.
      G_R_DISP_VARIANT-REPORT = SY-REPID.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
           EXPORTING
                IS_VARIANT    = G_R_DISP_VARIANT
                I_SAVE        = 'A'
           IMPORTING
                ES_VARIANT    = G_R_DISP_VARIANT
           EXCEPTIONS
                NOT_FOUND     = 1
                PROGRAM_ERROR = 2
                OTHERS        = 3.
      IF SY-SUBRC = 0.
        P_VARIAN = G_R_DISP_VARIANT-VARIANT.
      ENDIF.
    ENDFORM.                               " SHOW_EXISTING_DISPLAY_VARIANTS
    If useful reward.
    Vasanth

  • Out put in Background (SM37) not showing All columns

    Hi Folks,
             I’m creating an out put display for my query in background , we have define an output device , after submitting the query in back ground it just showing me only 10 columns . I mean I its not showing me all columns when I went to SE37-> select job->”spool ->view (display).
    Why it’s happening?
    Please help me
    Cheers
    Usman

    When you are submitting the job in background by exexuting your query from Sq01 or Tr.code , a screen will pop-up ask for you device name, on the same screen you’ll see properties hit that, it’ll take you to another screen and change the report format 65 and 200 or 65 and 200. It depends on your out put device . You can only display report till 255 . If you want to active ALV functional enable in background spool job you have to use extracts for that . So you can download your data in correct format.
    You can also decrease the length of variables in query so within 255 characters you can see all report columns. 
    Hope this’ll help you .
    Hope this’ll give you idea!!
    <b>P.S award the points.</b>
    Good luck
    Thanks
    Saquib Khan
    "Some are wise and some are otherwise"

  • GR Print Out Put Types

    Hi
    Wats the diff between invidual slip and collective slip in MIGO screen
    Wats the std out put type for GR print out in mb90
    Vijay

    hi
    individual means single item per printout
    collective means all items in GR
    o   Individual slip (version 1)
         In this case, one GR/GI slip is printed out for each item.
    o   Individual slip with inspection text (version 2)
         In this case, one GR/GI slip is printed out for each item. In
         addition, a quality inspection text is printed if there is one in
         the material master record.
    o   Collective slip (version 3)
         In this case, a collective slip including all the items in a
         document is printed.
    WE01, WE02 and WE03,  are std output types
    regards
    kunal
    Edited by: kunal ingale on Dec 27, 2008 9:50 AM

  • Alv and excel sheet out put.

    hi friends,
    now i am working on sales and purchase order report. For this i have created three radio button on selection screen one for sales 2nd for purchase and 3rd for both. when i click sales radio button it is going to display only sales data in ALV out put list as well as in EXCEL sheet.
    problem:-
    Some layout fileds (out put fields) i am storing in VARIENT and when i have passed this VARIANT in a SELECTION-SCREEN so here the output is ok for me, and i am unable to display these same fields in EXCEL sheet for this Please could u tell that how we do this. please send the logic for this.
    thands and regards.
    sagi.

    Hi Amol,
    you are not getting me ...
    see your itab will have all the fields irrespective of variant used. so you can directly use itab to download.
    i guess you are using alv tool bar option to download.
    but i am telling to use your own button to download the report using your own button with GUI_DOWNLOAD Fm.
    for this you pass your ITAB and and then give the file name then this will save all the fields to excel file.
    Regards
    vijay

  • Hi gurus in ALV how to edit the fields on out put list

    hi gurus in ALV how to edit the fields on out put list

    hi
    REPORT ZSB_ALV_EDITABLE_SAMPLE.
    TABLES: SFLIGHT.
    DATA: gc_container TYPE scrfname VALUE 'LIST_AREA',
    gc_custom_container TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
    gc_grid TYPE REF TO CL_GUI_ALV_GRID,
    gs_layout TYPE LVC_S_LAYO,
    gt_fieldcat TYPE LVC_T_FCAT.
    DATA: ok_code TYPE SY-UCOMM.
    DATA: gt_outtab TYPE TABLE OF SFLIGHT.
    *DYNPRO
    CALL SCREEN 100.
    *& Module STATUS_0100 OUTPUT
    MODULE STATUS_0100 OUTPUT.
    SET PF-STATUS '100'.
    CREATE OBJECT gc_custom_container
    EXPORTING
    container_name = gc_container
    EXCEPTIONS
    cntl_error = 1
    cntl_system_error = 2
    create_error = 3
    lifetime_error = 4
    lifetime_dynpro_dynpro_link = 5
    OTHERS = 6.
    CREATE OBJECT gc_grid
    EXPORTING
    i_parent = gc_custom_container
    EXCEPTIONS
    error_cntl_create = 1
    error_cntl_init = 2
    error_cntl_link = 3
    error_dp_create = 4
    OTHERS = 5 .
    PERFORM prepare_field_catalog CHANGING gt_fieldcat .
    PERFORM prepare_layout CHANGING gs_layout .
    PERFORM get_alv_display.
    ENDMODULE.
    *& Module USER_COMMAND_0100 INPUT
    MODULE USER_COMMAND_0100 INPUT.
    OK_CODE = SY-UCOMM.
    IF OK_CODE = 'BACK'.
    SET SCREEN 0.
    LEAVE SCREEN.
    CLEAR OK_CODE.
    ENDIF.
    ENDMODULE.
    FORM prepare_field_catalog CHANGING gt_fieldcat TYPE LVC_T_FCAT.
    CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
    I_BUFFER_ACTIVE =
    I_STRUCTURE_NAME = 'SFLIGHT'
    I_CLIENT_NEVER_DISPLAY = 'X'
    I_BYPASSING_BUFFER =
    I_INTERNAL_TABNAME =
    CHANGING
    ct_fieldcat = gt_fieldcat[].
    ENDFORM.
    FORM prepare_layout changing p_gs_layout TYPE lvc_s_layo.
    p_gs_layout-zebra = 'X'.
    p_gs_layout-edit = 'X'.
    ENDFORM. " prepare_layout
    FORM get_alv_display .
    SELECT * FROM sflight INTO TABLE gt_outtab UP TO 10 ROWS.
    CALL METHOD gc_grid->set_table_for_first_display
    EXPORTING
    I_STRUCTURE_NAME = 'SFLIGHT'
    IS_LAYOUT = gs_layout
    CHANGING
    it_outtab = gt_outtab
    IT_FIELDCATALOG = gt_fieldcat
    ENDFORM. " get_alv_display

  • 'Back ground Job' Out put is truncating

    Hi Gurus,
                      I am excecuting the report in background. It's out put is truncating after some length and comes in the next line. It gives the undesirable fromat. I tried with higher spools also. it doesn't do the need.
                      Plese let me know any other options are available for this.
    I appreciate your help and cooperation.
    Regards,
    Mahesh.

    Hi,
    You have to create an output Variant in your report and select it in your selection screen during Execution in Background.
    Secondly, make the output field length as per the screen visibility.
    Run the report using the variant, execute in background mode (this option is available in program menu) which in turn creates background job. In SM37 you can see the output in Spool List similar to foreground.\
    To get the missed fields in the spool, while creating the background job(execute in background option) you can see the printer setting block at the end of the background job settings window, in that check the 'Spool Request Max. Width 255 char' check box and then continue. It will generate the spool list with maximum width and you can see all the fields in the spool output.
    Regards,
    Shamma

  • Out-puts for mac mini

    while sitting by my computer the other day i realized that my music stopped playing and my screen lost all video. my screen said "no input". the computer was not "sleeping", it just stopped all out-put the only way i can get it to go back on is to restart the computer. this happens at random times while i am using it. what is going on?
    Message was edited by: acedelman

    Hi,
    I'm not sure, but I would try a few things.
    Check if your system light is still on?
    Check if you can ping your system from another computer, if available. You should find the IP address of your computer before it blanks-out on you.
    Is the bottom very hot? Try turning on its side when it's running. Maybe it's overheating? This is just a guess. I always run mine on its side, as the bottom gets hot.
    David

Maybe you are looking for