SCREEN PAINTER ACTIVATION

HI EXPERTS
i am trying design the screens in the SE51 in that i am not able to see the screen painter there..i tried it in
GUI VERSION 640 then i uninstalled the GUI and installed the GUI VERSION 7.10 even though it is showing the same in the SM53 scereen. so plz HELP ME.................................very urgent.
Cheers,
deepak

Try to use the Graphical Screen Painter by checking the checkbox in the settings of screen-painter tab in User Specific settings from ABAP development workbench. (Utlities --> Settings). Try this may be it will ok then. Hope you installed all the options while installing the GUI 7.10.

Similar Messages

How to insert tabstrip control in module pool screen painter

Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.

To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT

How to set Function Code for Radion Buttons in Screen painter

Hi,
I have faced problem of grouping 3 radio buttons in screen painter (no graphical editor). How to do it?
I have checked similiar threads in SDN, but those are for graphical editor.
Radio Buttons in custom screeen
http://****************/Tutorials/ABAP/Checkbox/page1.htm
http://****************/Tutorials/ABAP/Checkbox/page2.htm
Regards,
Sukhbold

Hi,
U want to create radio button in the selection screen then u can create like this
PARAMETERS : c1 AS CHECKBOX USER-COMMAND cd,
r1 RADIOBUTTON GROUP rad,
r2 RADIOBUTTON GROUP rad.
AT SELECTION-SCREEN OUTPUT.
IF c1 = 'X'.
LOOP AT SCREEN.
IF screen-name = 'R1'.
screen-input = '0'.
screen-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF screen-name = 'R1'.
screen-input = '1'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Thanks,

How can i make the radiobutton use screen painter?

hey experts,
i paint 3 radiobuttons in group1 use screen painter,
but when i execute the screen,all of the radiobutton are black, it means radio1='x',radio2 = 'x',radio3 = 'x'.
i only want radio1 = 'x',radio2 = ' ', radio3 = ' '.
how to do that?
and i can't do it in screen 1000.
thank you.

Hi,
Select the three radio buttons in the screen painter,
Edit->Grouping->Radiobutton group-> define.
In this case all the radio buttons will be under one group and at a time only one will be active.
Thanks,
rajinikanth

Screen painter problem

Hi everyone,
In screen painter, I would call the current screen before output module. But it tells 'the statement is not accessible' when I active the programme. What's the problem? Thanks!!

call under start of selection event.
start-of-selection.
call screen 100.

Coding in form created in screen painter

I have created a form in screen painter.How can I do coding in this form.I have added a save button in the form.How can I fire the click event on this button.The file created has extension srf and it can not be opened in asp.net.

Hi Dilip,
Although the file has a srf file extension it is actually an XML file. You can use this file to create an instance of your form through code. In the UI API there is a Application object. This object has a method called LoadBatchActions which takes one parameter which is your srf file (ie the path and filename). Calling this method will create a form in the active UI based on your srf file. You can then create an instance of the Form object in the UI API and use this to manipulate your form through code.
I also recommend you look at the SDK learning material here on the SDN and also look at the samples that come with the SDK.
Kind Regards,
Owen
P.S. Please note that you've posted your question in the application forum for SAP Business One. This forum is for discussions on the application functionality of SBO and not the SDK. Instead, please post queries about screen painter and other development questions here:
SAP Business One SDK
Thanks

Graphical screen painter activate 46B

hi
i work in SAP 46B version; i don't find graphical screen painter
how can i active graphical painter instead of alphanumeric screen painter ?
thinks

Go to the menu Utilities->Settings in se51 and check the settings and check the checkbox for Graphical Layout Editor.
Regards,
Ravi Kanth Talagana

Adding input box to screen painter

Hi abapers,
my question is...... is it possible to add input box to screen painter though code,
NOT by drag and drop?

Well it would probably be technically possible to create a complete dynpro "on the fly" in memory and then save and generate it (i.e. replicate everything SAP does in SE80) and then display it to the user... however the risks are high, and the user might not like the delay while your program does this. The usual practice is to define the field on the screen, and then hide it if it is not required under some circumstances, using the usual "loop at screen. screen-active = '0'. endloop." technique.

TS4148 configuration screen then Activation screen

I bought an iPhone 3Gs for my wife as she is always using mine. This was advertised as unlocked. When I powered up the phone, first screen is a multi language setup select language followed by set country and wifi. Final screen is Activation and this is where problem starts. It doesn't recognised the SIM card and won't go any further. I have tried two seperate SIM cards with same message.
Strange though that it should start up with the grey config screen rather than the home page with basic icons. My phone which is a hand me down from my son opened into home screen.
Any ideas on how I can get around this and get the phone working. Seller not very helpful.

Try to use the Graphical Screen Painter by checking the checkbox in the settings of screen-painter tab in User Specific settings from ABAP development workbench. (Utlities --> Settings). Try this may be it will ok then. Hope you installed all the options while installing the GUI 7.10.

How to start screen painter

Hi
How to start screen painter?????. I have installed SAP Business One. I tried installing ScreenPainter via ADD-ON administrator provided in SAP B One.

Hi Shabbir
When you assigned it to the company did a installshield window come up and install the addon?
-If no,tick force install and active. Log off sap and then log on, it will then install.
-If yes it did do it, sometimes you need to log on and off before seeing it in add-on manager. Also make sure that in add-on admininstration window on the second tab called user preferences if that user you are logging on as that add on is ACTIVE.
One you do the above, go to tools->screen painter.
Hope this helps

Error while opening a screen painter

Hi all,
I am trying to modify a screen in SE80. But when i am clicking on the screen painter it shows 'EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. 37033. Please let me know how to resolve this issue. Thanks a lot for your help!
Regards,
Priti

For the Future Problem Facers:
I too faced the same problem and the below steps helped me.
Re: SFLIGHT is NOT defined for the current logical database.
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.

F4_FILENAME in search help in screen painter

Hello gurus,
I want to design a screen in which the text input field is used to get file name. For that i need to enable file search in local folders and drives with f4 key press. I wish to use the functionality of function module 'F4_FILENAME" in screen painter. How can i do that?
I tried creating search help for RLGRAP structure. It compiles fine but gives the message 'No inout for selection'.
What should i do?

Thank you all,
The problem has been solved.
I am posting the final code.
1. In se38, i created program zprogram.
2. In se51, i created a screen for the program zprogram.
3. In layout, i took 2 buttons and one input/output field.
1st button for import and 2nd button for exit.
4.In flow logic-
i wrote the follwing code.
PROCESS BEFORE OUTPUT.
MODULE STATUS_100.
PROCESS AFTER INPUT.
PROCESS ON VALUE-REQUEST.
FIELD FILENAME1 MODULE F4_FILE_SEARCH.
5. IN THE MAIN PROGRAM
i wrote the following code-
REPORT ZPROGRAM.
DATA: FILENAME1 TYPE RLGRAP-FILENAME,
           OK_CODE TYPE SY-UCOMM.
CALL SCREEN 100.
MODULE F4_FILE_SEARCH INPUT.
OK_CODE = SY-UCOMM.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
    FIELD_NAME         = 'FILENAME1'
IMPORTING
    FILE_NAME           = FILENAME1
ENDMODULE.
MODULE STATUS_100 OUTPUT.
CASE OK_CODE.
WHEN 'IMPORT'.
MESSAGE 'THE FILE IS RECIEVED' TYPE 'I'.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
I REFERRED TO THE DEMO PROGRAM MENTIONED
IN OTHER POST
NAME OF THE DEMO PROGRAM IS - DEMO_DYNPRO_F4_HELP_MODULE

How to create a drop down box and text box in screen painter?

Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.

Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
    land1 TYPE t005t-land1,
    natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
     FROM t005t
       INTO TABLE i_t005t
   WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
      w_natio-key = i_t005t-land1.
      w_natio-text = i_t005t-natio.
      APPEND w_natio TO i_natio.
      CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
                      id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                values = i_natio
EXCEPTIONS
   id_illegal_name = 1
            OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
    mark type c , "This is to select the record.
    matnr like mara-matnr ,
    matkl like mara-matkl,
    maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
   Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O

Is it possible to display the standard function keys in screen painter

Hi ,
I design a screen in se51 where I use push buttons and input/output buttons and so on in the layout, here in the layout or in my final output screen(when i assign this screen to a transaction) I would like to display other standard keys, ie the function keys and application toolbar items. I would like to know whether there is a possibility to do this , if yes then how?
In a menu painter there is a possibility where I can customize the keys or I can use the standard keys by going to se41 extras->adjust template. Is there similar possibilities in the screen painter.

Ok I see. I should use &var.
Edited by: xerosaburu on Aug 18, 2009 11:37 AM

Is there any possible to display the text in big font in screen painter

HI all!
i want to display the text in the large size in the text field in the screen painter in the odule pool programing.Is there any possible.What i have to do in the screen painter to display the text in the large size.Also is there any possible to put the color for the text.Give me reply

HI
CALL METHOD o_dyndoc_id->initialize_document
      EXPORTING
        background_color = cl_dd_area=>col_tree_level1.
    DATA : dl_text(255) TYPE c. "Text
    CALL METHOD o_dyndoc_id->add_text
      EXPORTING
        text         = 'Flight Details'
        sap_style    = cl_dd_area=>heading
        sap_fontsize = cl_dd_area=>large
        sap_color    = cl_dd_area=>list_heading_int.
* Display document
    CALL METHOD o_dyndoc_id->display_document
      EXPORTING
        reuse_control      = 'X'
        parent             = cont
      EXCEPTIONS
        html_display_error = 1.
    IF sy-subrc NE 0.
    ENDIF.
by using these methods you can achieve i hope..
have a good day.
regards
sarves

SCREEN PAINTER ACTIVATION

Similar Messages

Maybe you are looking for