Screen Painter can't be started
hi experts,
I installed screen painter in Add-On Administration, and when i try to start it in Add-On Manager, it always popped up a message and said "Cannot start Add-on".
What should I do to let screen painter work? thanks...
Hi Delete This 2 Files
1.AddOnsInstall
2.AddOnsLocalRegistration
This Will be Located in C:\Program Files\SAP\SAP Business One, Your problem Will be Solved
Mohamed Zubair
Similar Messages
-
SE51 Screen Painter - can't not start graphical painter
hello All,
when we try to use SE51 - screen painter through a connection via saprouter the followin message appear:
Password in router string. Cannot start graphical screen painter
we have installed SAP GUI 7.10 patch 02
Thanks.
HernandoHi,
This error is described in SAP Note 898102. the issue is resolved as of SAPGUI Release 710: Import GUI patch 03.
Apply the latest GUI patch. you can find the latest patch in service marketplace.
Regards,
Debasis. -
Help!! graphical screen painter can't use.
hi,everyone.
we conncet to sap with sapgui by saprouter.
the graphical screen painter not available .
how to deal with this problem?Check the RFC - EU_SCRP_WN32 destination in SM59.
Perform a "Test Connection": if the connection doesn't work maybe there is an issue in the connection between the presentation server and the application server.
Check if there is a firewall that blocks the port used by the RFC.
I have the same problem if I use a VPN connection to logon. The graphical screen-painter does not work...
Hope this helps,
Roby.
PS: check out if in <sapgui_directory>\FrontEnd\SapGui there are these executables:
gnetx.exe and gneux.exe
These are the necessary files to start the Screen-Painter. -
How to work with Alphanumeric Editor in Screen Painter?
Hello Guys,
I am trying to work on Screen Painter Layout and it's showing me that Graphical Screen Editor is not
available and continue working with Alphanumeric Editor.I don't know how to work on this.Guys,
Please let me know why is the message and what can we do about it.
Thanks in advance,
SriSomtimes you will get this message if something got screwy with your SAPgui, for me simply closing out of SAPgui and going back in has fixed this issue. If you do not know for sure that your SAPgui had been installed including the screen painter, then you should start there. You will need the SAPgui installation executable, either from CDs or a downloaded file. Run the SAPgui installation, and make sure to select the screen painter as part of the install, i believe it is under "development tools" in previous versions. In newer versions I believe it is installed by default, but I do no for a fact that it is not this way in earlier releases, such as the 46D gui.
So for make sure that Screen Painter has been installed with your SAPgui, if you are sure that it had been installed, perhaps it was working fine yesterday, then I would suggest first closing out SAPgui, and going back in, and trying the screen painter, If the problem persists, it may be worth it to reinstall the gui.
Regards,
Rich Heilman -
Hi,
What is the difference b/n screen painter and module pool?
Which to use & when?
Regards,
SiriSCREEN PAINTER-
The Screen Painter is a component of the ABAP/4 Development Workbench. In the Screen Painter, you can define the following interface elements with their associated attributes:
input/output fields
field names
checkboxes
radio buttons
Group boxes
subscreens
pushbuttons with no fixed position
To start the Screen Painter, choose the corresponding pushbutton on the initial screen of the ABAP Workbench or enter Transaction SE51. From here, you can:
Create new screens.
Test an existing screen.
Create new components for an existing screen.
In the Screen Painter, you define the graphical layout of the screen as well as the underlying flow logic.
The layout editor of the Screen Painter can run in two different modes:
alphanumeric mode
graphical mode
MODULE-POOL-
An ABAP program with the program type 'M'.
ALSO IN MODULE POOL , OUTPUT SHOWS IN ANOTHER TRANSACTION CREATED BY US.
module pool should be used with each infotype. This module pool is the main program for the maintenance interface for the infotype.
***DO REWARD IF USEFULL
VIJAY -
Regarding screen painter tutorial
hi,
i am new to screen painter & i want to start working on it as i have been assigned a report.
plzz help me by giving d easiest example of performing it as help will be definately rewarded.Screen Painter
Screen Painter is an ABAP Editor tools allowed us to create dialog screen. Dialog screen usually created as a screen to catch user input. It can be accessed by tcode SE51.
Screen Painter Architecture
You use the Screen Painter to create and maintain all elements of a screen. These are:
Screen Attributes
Describe a screen object in the R/3 System. Screen attributes include the program the screen belongs to and the screen type.
Screen layout
Screen elements are the parts of a screen with which the user interacts. Screen elements include checkboxes and radio buttons.
Elements
Correspond to screen elements. Fields are defined in the ABAP Dictionary or in your program.
Flow logic
Controls the flow of your program.
Two Screen Painter Modes
The Screen Painter has a layout editor that you use to design your screen layout. It works in two modes:
Graphical mode and
Alphanumeric mode.
Both modes offer the same functions but use different interfaces. In graphical mode, you use a drag and drop interface similar to a drawing tool. In alphanumeric mode, you use your keyboard and menus.
Graphical mode is available only on MS Windows 95, MS Windows NT, and Unix/Motif platforms.
To activate the graphical mode, choose Utilities ® Settings in the Screen Painter, then select the Graphical layout editor option.
Creating a Screen: Basics
Create a screen in an existing program and define its attributes.
Design the screen layout and define the attributes of the elements.
Write the flow logic.
Basic Principles
Uses predefined elements with links to the ABAP Dictionary or program.
Supports forwards navigation.
Supports complex elements: Table Control and Tabstrip Control, and Custom Container.
Cut/ Copy/ Paste (Graph. fullscreen)
Undo/ Redo (Graph. fullscreen)
Check this link for STEP-BY-STEP DEMO FOR SCREEN PAINTER with screen shots
http://abapliveinfo.blogspot.com/2007/12/working-with-screen-painter-in-sap.html
Check this link for Screen Painter Concepts http://help.sap.com/saphelp_nw04s/helpdata/en/d1/801c54454211d189710000e8322d00/frameset.htm -
Dear all
When i using SE51 to open any screen , the screen painter can't give me the graphical layout editor and shows the following message:
EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. 37033
Anyone knows what is the problem?
Detail information :
SAP GUI Version : 710 for window
Fatch Level : 11
thanks for your input.Dear All... I had same problem for many mounths... My solution has been the "NAME" of my computer. My name contains a special char ( ì ) and the server didn't answer at my "request" to launch the screen painter SAP.
So try to change your "PC-Name" without special char (ex: "office") and try again to launch the Screen Painter.
I'm sorry for my bad english and i hope this reply will be usefull for You.
Paolo
ITALIAN VERSION:
Ciao a tutti, io ho avuto questo problema e non sono riuscito a trovare risposta; nelle innumerevoli ricerche in rete, con colleghi e persone più esperte di me sono riuscito a capire che lo Screen Painter di SAP in realtà è una sorta di "richiesta" che viene fatta al server. Se il Nome del PC contiene caratteri speciali, il server sembra non rispondere e quindi si va in timeout.
In pratica ho risolto formattando il PC ed in fase di re-installazione de S.O. ho dato come nome solo il mio nome di battesimo ed ho risolto. Ho dovuto effettuare un Format perchè nonostante avessi cambiato il nome del PC da schermata di Windows, la modifica non sembrava essere effettuata correttamente.
Ho testato questo problema su diversi computer e il problema si è sempre risolto in questa maniera.
Spero che questo contributo sia utile a tutti Voi.
Rimango a disposizione per qualsiasi chiarimento.
Paolo -
Matrix column position problem in screen painter.
hi.
i am facing one problem.
ie.
i am developing one screen.
it is having 3 matrix
each matrix is having some columns
one matrix ok two matrix ok thrid matrix ok.
but
under third matrix i put some columnes
1, 2 ,3, 4,
in screen painter design mode every thing is ok
it is appearing like 1,2,3,4
but at preview mode or through the code if i open
it is appearing like 1, 4,3,2
in preview mode screen painter if i click on the form settings it is showing only..
matrix one columns only it is not showing either 2 or 3
and if i open the form through the code..
i am able to see the columns of matrix 1 n matrix 2 and matrix 3
i am using some code.
If (pVal.FormUID = "WIP2PROCESS" And pVal.ItemUID = "1000007") Then
oForm = SBO_Application.Forms.Item("WIP2PROCESS")
oForm.PaneLevel = 2
oForm.Settings.Enabled = False
oForm.Settings.MatrixUID = "59"
End If
now through the source code i am able to see the each column under matrix.
but if i change the matrix position at form setting it is changing but
if i click other folder and come back to previous folder..
again the column position is 1, 4,3,2
previously i changed to 1,2,3,4
how can i do it..
screen painter can i change it..
Any information plz update me..Hi Srinivas,
Can you do one thing for me ? Open your form in screen painter, set the columns as you want to display. Now change the unique id for the matrix. Then try to open it through code or see in preview mode.
Hope it helps.
Thanks & Regards
Ankit Chauhan -
ERROR: password is router string,cannot start graphical screen painter
Hi Exprtts,
I remotely Login SAP at home and I want to edit the screen by screen painter. But the system pop-up a message : password is router string,cannot start graphical screen painter. But at office I can start the screen painter and edit the screen.
Any one can tell me why and how to solve this problem??Thanks in advance.
JoeDear Allen,
Please have a look at Below Note
SAP Note 898102 - Error message "Password in router string."
Solution in Note is given as below.
SAPGUI Release 620: Import GUI patch 59.
SAPGUI Release 640: Import GUI patch 16.
SAPGUI Release 710: Import GUI patch 03.
Hope This Solve your Issue.
If required also See OSS notes 204910 and 101971
Regards,
Lijo joseph
Message was edited by:
Lijo Vazhappilly -
Se80 cannot start graphical screen painter
Hi experts:
When I open graphical painter, I counter a problem message 'password in router string.cannot start graphical screen painter' of gnetx.exe, Who can solve it,TKS.
AllenDear Allen,
Please have a look at Below Note
SAP Note 898102 - Error message "Password in router string."
Solution in Note is given as below.
SAPGUI Release 620: Import GUI patch 59.
SAPGUI Release 640: Import GUI patch 16.
SAPGUI Release 710: Import GUI patch 03.
Hope This Solve your Issue.
If required also See OSS notes 204910 and 101971
Regards,
Lijo joseph
Message was edited by:
Lijo Vazhappilly -
I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?
Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
Hi how can i fix my pc if the screen display "windows failed to start"
I was try repair my pc but in the screen only display the following message : Windows failed to start.Arecent hardware or software change might be the cause.To fix the problem;
1.-Insert your windows installation disc and restart your computer.
2.-Choose your lenguage settings,and then click "next"
3.-Click "repair your computer"
If you dont have this disc contac your system administrator or computer manufacturer for assistence.
File"\windows\system32\windload.exe
status:0xc0000221
info: The file is possible corrupt.Its header checksum does no match the computed checksum.
I just dis all thos things,reinstal recovery cd but always display the same on the screen ,HOW CAN FIX THIS PROBLEM,thank youI was reinstall the system many times but always is the same message on screen
If you restored the hard drive to its original factory-new contents using the Toshiba recovery media, then the problem is almost certainly due to malfunctioning hardware.
Locate a Service Center
-Jerry -
i was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio
What exactly are you seeing on the phone's screen ? If the iTunes icon and cable then the phone is in recovery mode, in which case it's too late to take a new backup or to copy any content off the phone - you will have to connect the phone to your computer's iTunes and reset it back to factory defaults, after which you can restore to the last backup that you took or just resync your content to it
-
Can any share me the procedure to create a text box in screen painter?
Hi Friends,
Can anyone share me the procedure to create a text box in screen painter and browser for attaching files ....please its urgent....
Points will be definetly rewarded.
ThanksRefer to
How to create a text box in ascreen painter?
where another user (venkateshwar reddy) has asked a very similar question... is this an exam question?
Jonathan -
How can i make the radiobutton use screen painter?
hey experts,
i paint 3 radiobuttons in group1 use screen painter,
but when i execute the screen,all of the radiobutton are black, it means radio1='x',radio2 = 'x',radio3 = 'x'.
i only want radio1 = 'x',radio2 = ' ', radio3 = ' '.
how to do that?
and i can't do it in screen 1000.
thank you.Hi,
Select the three radio buttons in the screen painter,
Edit->Grouping->Radiobutton group-> define.
In this case all the radio buttons will be under one group and at a time only one will be active.
Thanks,
rajinikanth
Maybe you are looking for
-
Billing type does not exist in application CRMB
Dear all, I am trying to invoice a service confirmation and the corresponding entry is not found in billing due list. When I analyse the missing entry in /n/bea/crmb04, System is throwing an error that corresponding billing type and itemcategory are
-
Wireless speed slow on dual boot windows 7 but very fast on Mac OS
At home, i have mac mini and installed dual boot system. the wireless network speed is perfectly fine on Mac OS, about 10M. But only has less than 1M speed while in windows 7. All other pc/iphone/ipad/ipod touch are all arround speed 10M in the same
-
External page opened in same window
Not sure if this is the right place for this but thought I'd try. I have a product page with a link that says options. What I want is that when the "options" link is pressed I want an external page that would be relativly small to open infront of the
-
Why does Iphone 4s not charge on lock screen
4s will not charge when it goes to lock screen. it will when i keep the phone awake but as soon as it goes to the lock screen it won't.
-
I have a 5th generation iPod nano. I downloaded an audiobook on Itunes. It will not let me sync saying this computer is not authorized. Anyone know what to do?