Screen painter is not working properly.

Hi,
when i execute se51 the screen painter is not coming properly.
some dotted line coming and throughing the below message.
EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
i am using sap gui 710 final release with patch 7.
can plz suggest wht should be the problem.
Regards
deepak

Hi Deepak,
As Ashutosh said, please post the thread in the ABAP forum. Do not create a new one.
Moderators,
Please move this thread to ABAP forum.
For the time being, refer the notes: [204910|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=204910], [885581|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=885581] and [101971|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=101971]
Regards,
Srihari

Similar Messages

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

SCREEN PAINTER Layout not working

Hi,
we have SAP Netweaver 7.0 Trial version,
we are using SAP GUI 710,
when we try to view the SCREEN PAINTER Layout it is not functioning properly..
The screen displays fully in dotted lines.
Anybody can help me..
Regards,
Sudhakar N

Hi,
S the option which u said in Utilities-->settings
Graphical Layout editor is Enabled,
then also the output screen displays in dotted lines.
if you send me id i will send u the scree shot how the window displays..
Thanks & Regards,
Sudhakar

Camera lock screen iPhone 5 not working properly after upgrade to iOS 8

After I installed iOS 8 on the iPhones 5 of my and my wife's the camera on the lock screen isn't working properly anymore. When I swipe up, the camera starts but the screen turns black within less then a second.
On the iPad 2 and the iPad Air (both upgraded to iOS 8) I don't have this problem. It seems to be iPhone 5 specific.
Has anyone else experienced this problem?

Having the same problem. I'm on an iPhone 5 and I have updated to 8.0.2. When I go to apps directly from the lock screen (timer, calculator, camera) it opens up then immediately turns into a black screen. It appears that removing my passcode fixes this bug, but I can't have an unsecured phone. Please help Apple!

[Solved]dual screen (radeon 9200) not working properly under composite

I am running a radeon 9200 on my desktop with monitors plugged into both the DVI and VGA outputs. I'm using the xf86-radeon-ati driver with no Xorg.conf.
I have been using openbox for a few years now, and for as long as I remember, all I needed was:
xrandr --output DVI-0 --auto --left-of VGA-0
and everything works fine. Seems like xcompmgr and cairo-compmgr also work properly.
I was experimenting with XFCE4, which works fine until I try to also use compiz as the window manager. The right side on the left monitor become jibberish, and the second monitor also becomes just as messed up, and I cannot properly drag any windows.
The same thing happened when I installed KDE4.
I should note two things:
1) If I clone the two monitors, everything works fine.
2) If I change from OpenGL to XRender (under desktop effects in KDE settings), everything works fine, just quite slowly.
Am I right in guessing that compiz works based off of OpenGL? Is there some way to get OpenGL working properly with my setup, or is this not an option?
Last edited by twistedcubic (2012-06-01 15:27:06)

Gusar wrote:Depends on the resolution. It's quite possible the card's limit when it comes to opengl is 2048x2048. If the combined resolution of your displays is larger than that, you simply can't use an opengl compositor.
Does this have anything to do with texture size? If I try to enable composite from terminal, I see some error messages regarding texture size, and after some googling it appears as if it is possible that the max texture size is 2048.

Oil Paint filter not working properly

When I run it, it just turns the image a dark, almost black, grey. If I change the settings, it functions properly, but several actions I have that use it all fail and give me the dark grey. I'm using Photoshop CC 64bit.

Macintosh or Windows?
Exact version of the OS and of Photoshop CC 64 bit?
What type of image?
What bit depth and what color space?
Can you show your action with all steps visible?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

My iPhone 6 plus screen orientation is not working properly

I Bought my iPhone 6 plus 64GB on launch day and I haven't really had any problems, until a few days ago... My screen orientation will randomly flip upside down from the Touch ID home button. It it will be horizontal when I'm holding my device verticle, if I turn on the orientation lock the screen will return to normal but that's a temporary fix. I'm pretty sure this is a hardware problem, but I'm not positive. Is there a way to fix this?

Try hard resetting your phone:
Hold down the power and home buttons simultaneously until the screen turns off, then let go. Then press the power button to turn the phone back on. If that doesn't work, you may have to take your phone in to an Apple Store. Given the fact that you just purchased it, you will most likely get a replacement phone free of charge.
In the case that you decide to bring your iPhone in, make sure to create a backup first.
See these articles for more information:
Turn your iOS device off and on (restart) and reset
Back up and restore your iOS device with iCloud or iTunes
Wishing you the best of luck.

Camera lock screen iPhone 5S not working properly after upgrade to iOS 8.1.3

Actually, i upgrade my iPhone to 8.1.3.
What i am trying achieve is, when my iPhone is locked i just need to access my camera without login.
When i open camera when my iPhone is locked, camera displays for 2 seconds and then my screen will be black.
Has anyone else experienced this problem?

Hi there, I haven't actually heard of this issue but I would advise restoring your iPhone which should fix that. Follow this article below and follow the steps.
Use iTunes to restore your iOS device to factory settings - Apple Support

Screen painter not working properly to edit an ALV screen

Hi I am stuck with a problem, I want to edit a screen which is an ALV report screen and add a custom button to its toolbar. But the screen painter is not opening properly so that I can see the screen layout and add a button.
Any help is greatly appreciated....

HWat do u mean by the screen is displaying improperly? Is teh graphical layout not coming?
If so, you have to contact your basis team. you need to get the latest Gui version, and you need a particular port to be opened.

Display has white and grey lines and blocks crisscrossing it and touch functions are not working properly on half the screen.

I dropped my iPhone 5S and it landed flat on it's face (it was in a protective case). Since then my touch screen display is not working properly. I have white and grey lines and/or blocks crisscrossing the screen both horizontally and vertically. Screen responds to touch in odd random ways, but rarely does what I am trying to do. Can't call or receive calls because can't dial or answer phone via swipe. Can't text or read incoming texts. All functions seem to be working except that I can't access them because the touch screen is acting up. If I move the phone around it randomly accesses different apps or functions, but I have no control over them once the appear on the screen. Touching screen just causes phone to randomly choose something else to open. What have I damaged?

Shanegang77 wrote:
What have I damaged?
We cannot possibly tell. Obviously some hardware inside. Take it in to an Apple Store. They will offer you the opportunity to swap the phone for $269 in the US. Prices vary by country.

The paint bucket tool is not working properly. The colors does not change, any suggestion?

The paint bucket tool is not working properly. The colors does not change, any suggestion?

Maybe on the wrong layer.
It would be more beneficial if you capture your screen with the layers panel open and any layers that are collapsed, expand them.

My mail on iMac is not working properly. Click on email, it hangs, showing previous email. Takes forever to load. "No message selected" showing in a blank screen

My mail is not working properly: when I click on an email it hangs, frequently showing the previous email, often for up to a minute. Or it shows "loading" and just sits there showing nothing. OR there is a blank screen saying "no message selected". It's slow to load, and I'm not happy. Recently switched from Windows PC, not impressed so far. Very frustrating.
Any suggestions would be gratefully received. (I upgraded to Mountain LIon, and don't think I had problems before I did so, though I hadn't had the computer for long.)

Hi Sarah,
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Z2 double tap to wake up the screen is not working properly when taking it out of pocket

when i take my phone out of my pocket, the double tap function is not working properly, sometimes i have to tap over and over to wake up the screen.
do you know why? does same thing happen to yours ?
and please dont tell me not to use it. i have paid 700$ and i have right to use my phone fully functioning.
any advice ?

Actually it needs some practice, you need two gentle taps on the upper third of the phone (around the place where the clock shows on lock screen), tapping too hard or tapping on the lower part of the phone will require repeating the tapping more than one time. This is from my personal experience.
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario

I have just downloaded Yosemite but I find that Photoshop Elements 11 does not work properly. If I use a tool like a paint brush or spot healer I cannot paint a full stroke?

I have just downloaded Yosemite but I find that Photoshop Elements 11 does not work properly. If I use a tool like a paint brush or spot healer I cannot paint a full stroke does anyone else have this issue or know a solution?

Many thanks that does work. But it now leads to another question is this simply a trackpad issue and if so will it be fixed? I use Elements every day and was thinking I would have to go back to Mavericks.

Screen painter is not working properly.

Similar Messages

Maybe you are looking for