Screen Painter not work remote

Good Afternoon,
I have the following issue with the screen painter when i try of work remote using String of SAP Router.
When i am in the company if can user the screen painter, but when work remote using String of SAP Router(in the house) not can display this screen for create screeen.
What is the cause for solve this issue?

facing same problem

Similar Messages

  • GUI In screen Painter not working .plz help me.

    I have Installed SAP ABAP trail version 7.01 .
    I have Installed The GUI 6.40 forntend.
    It is working fine, BY using this I can connect to system, do pogrraming .
    But when click on layout button of any screen it show a msg " No response from some file .exe ( like ginit.exe I am not remembering the name exactly) and then it shows line edditor instead of graphical editor.
    And I want graphical editor.
    While Installing GUI there were lot of check boxes where there but I hecked the check box for GUI only beacuse I was not knowing anything about the rest, do I need to reintall it and selecte some more check box to fix the problem.
    I really dont know what should do, If anyone have any suggestion please let me know.
    Good answers will be appriciated.
    Thank you in advance.

    Hi, When you install the SAPGUI you can choose the GUI component. Check you have selected the 'Screen Painter* in the Installation. No need to uninstall the SAPGUI. Just Re-install the GUI with the Screen Painter component. It will solve your problem. Thks.
    Rgds,
    Jey

  • Screen painter not working with gui 7.1

    Hi,
    I am using sap gui 7.1 in this im noit able to use screen painter, so im using alphanumeric painter..
    I also tried with 6.4 but again same prob
    So, what could be the problem?

    you probably installed Internet Explorer 7.0...
    so go get the latest SAPGUI patches from ftp://ftp.sap.com/pub/sapgui/win/640/patches/ or ftp://ftp.sap.com/pub/sapgui/win/710/patches/ and try again.
    also, when installing, make sure you install ALL options, not just SAPGUI alone.

  • Screen painter not working properly to edit an ALV screen

    Hi I am stuck with a problem, I want to edit a screen which is an ALV report screen and add a custom button to its toolbar. But the screen painter is not opening properly so that I can see the screen layout and add a button.
    Any help is greatly appreciated....

    HWat do u mean by the screen is displaying improperly? Is teh graphical layout not coming?
    If so, you have to contact your basis team. you need to get the latest Gui version, and you need a particular port to be opened.

  • Screen Painter not working?

    Hi All,
    When i Open my screen painter and click on "Layout" button
    it shows error "No response from Graphical Screen painter-Exiting".  I have IDES 4.7c version on my pc at home. I'm an ABAPer and don't know about basis. Pls help to sort this problem.
    Thanks & Regards.

    Hi Beradze,
    1. Gui version is: 6.40.
    2. Files "gnetx.exe" & "gneux.exe" are available in the
        system.
    3.  "eumfcdll.dll" file is not showing in my installation.
    4. Two "eusp.dat*"  files showing in the system
        (euspdynd.dat, euspdyne.dat).
    5. I check the "sapsetup.log" file in my system and found only
        this error "SapFeiSv  3   Shell : file 'D:\47ides\GUI 4.0
        \GUI\WINDOWS\WIN32\sapgui\saplogon.exe' does not
        exist.
    6. I also checked the trace file, the error shown is given below:
        Sapgui 640 [Build 8965] Sat May 17 19:54:18 2008
        : 'partner not reached (host 192.100.10.1, service sapdp00)
        WSAECONNREFUSED: Connection refused
        How to disable firewall and antivirus? Pls let me know if you
        require any other information.

  • Graphical Screen painter not working in development server

    Hi,
    SAP Graphical editor not working.  I am getting the following error.
    EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    Last week its sucessfully working but suddenly happen this issue... This problem in development server only. In production server is sucessfully working.
    Please advise...
    Regards
    Rajesh.

    This issue is caused by Local network response time delay.
    Solution to fix the issue is to increase the
    time-out parameter to RFC EU_SCRP_WN32.
    You can do it via transaction SM59, change RFC EU_SCRP_WN32 to a higher value.
    Jude

  • Graphical screen painter Not working

    Hi:
    When I am trying to access Graphical screen Painter in the transaction SE51,an error message is getting displayed with text "No response from graphical screen painter-exiting".
    And Alpha numeric editor is getting opened instead of GUI Editor.
    Can any One help me out with a solution.
    Thanks,
    Surya.

    hi,
    Try following links for downloading GUI.
    Link: [http://sapdocs.info/sap/uncategorized/sap-gui-downloads/]
    Link: [http://www.kodyaz.com/articles/download-sap-gui-for-windows-7.10.aspx]
    Link: [http://www.giveawayoftheday.com/sapgui7.2/]
    Regards,
    Renuka S.

  • My USB port (closest to the screen) is not working? And what is an IR Receiver in my USB port?

    Hi everyone,
         I recently found out that my USB port, closest to my screen, is not working. Before I called Apple Care for help, I performed a PRAM and a SMC RESET, which unfortunately did not work. I called Apple Care and they help me troubleshoot simple resets such as, shutdowns and restarts. The representative I spoke with conluded that the physical hardware has an issue and must be brought to the Apple Store for a diagnosis. I called the Apple Store to at least budget the fee for getting a USB port fixed and it's about $300.00. I never dropped my macbook or had any sort tactile encounterment with hard surfaces by dropping or hitting. I don't understand how my macbook pro would be physically damaged. I then thought maybe my software was out of date (right now I am running 10.9 Mavericks) or I forgot to do the minor software updates, but I was at a lost again because my macbook is up-to-date. I searched for further help and found a way to monitor what's plugged into my usb ports. (I read in the apple forums that a girl had nothing in her usb ports, but upon looking at the System Information> Hardware> USB, that the macbook recognizes that there are drives in the ports) I looked at my ports; one is being used by wirless mouse (the port that works) and the other (the port that doesnt work) is being used by an "IR RECEIVER". Now, is the IR Receiver actually using that port and that's why my macbook cannot recognize other devices inserted into that port? Or is the IR RECEIVER suppose to be in that port and that the hardware for that port is simply damaged (which would mean I need $300.00 to get that fixed)? I know this is a lot, but someone help me?
    (PORT THAT WORKS)
    USB Hi-Speed Bus:
      Host Controller Location:          Built-in USB
      Host Controller Driver:          AppleUSBEHCI
      PCI Device ID:          0x1c2d
      PCI Revision ID:          0x0005
      PCI Vendor ID:          0x8086
      Bus Number:          0xfa
    FaceTime HD Camera (Built-in):
      Product ID:          0x8509
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:           5.16
      Serial Number:          DJHBAJ06VRDH7FL0
      Speed:          Up to 480 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa200000 / 3
      Current Available (mA):          500
      Current Required (mA):          500
    Hub:
      Product ID:          0x2513
      Vendor ID:          0x0424  (SMSC)
      Version:           b.b3
      Speed:          Up to 480 Mb/sec
      Location ID:          0xfa100000 / 2
      Current Available (mA):          500
      Current Required (mA):          2
    Microsoft® Nano Transceiver v2.0:
      Product ID:          0x0745
      Vendor ID:          0x045e  (Microsoft Corporation)
      Version:           6.34
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Microsoft
      Location ID:          0xfa130000 / 6
      Current Available (mA):          500
      Current Required (mA):          100
    Apple Internal Keyboard / Trackpad:
      Product ID:          0x0252
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:           1.18
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa120000 / 5
      Current Available (mA):          500
      Current Required (mA):          40
    BRCM2070 Hub:
      Product ID:          0x4500
      Vendor ID:          0x0a5c  (Broadcom Corp.)
      Version:           1.00
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa110000 / 4
      Current Available (mA):          500
      Current Required (mA):          94
    Bluetooth USB Host Controller:
      Product ID:          0x821a
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:           0.42
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa113000 / 8
      Current Available (mA):          500
      Current Required (mA):          0
    (PORT THAT DOESN'T WORK)
    USB Hi-Speed Bus:
      Host Controller Location:          Built-in USB
      Host Controller Driver:          AppleUSBEHCI
      PCI Device ID:          0x1c26
      PCI Revision ID:          0x0005
      PCI Vendor ID:          0x8086
      Bus Number:          0xfd
    Hub:
      Product ID:          0x2513
      Vendor ID:          0x0424  (SMSC)
      Version:           b.b3
      Speed:          Up to 480 Mb/sec
      Location ID:          0xfd100000 / 2
      Current Available (mA):          500
      Current Required (mA):          2
    IR Receiver:
      Product ID:          0x8242
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:           0.16
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Apple Computer, Inc.
      Location ID:          0xfd110000 / 3
      Current Available (mA):          500
      Current Required (mA):          100

    I can help with the "IR Receiver" part of your question. That's the piece of hardware inside older MacBook Pros (MBPs) that lets them work with the Apple Remote. "IR" is the standard abbreviation for "infrared," the portion of the electromagnetic spectrum used by remotes for many common devices (stereos, cable boxes, Apple TVs, etc.). The remote sends a coded stream of IR pulses; a corresponding receiver in the target device "sees" the infrared light and decodes it. The MBP's internal IR Receiver sends the received signals to the processor via USB through an internal hub.
    The most recent MacBook Pros have dropped the IR receiver and no longer work with the Apple Remote.

  • I need to turn off 'find my iPhone' so that I am able to restore my phone but my screen is not working. I logged into my iCloud but was not able to turn it from here. How do I do this?!

    My iPhone 4 screen stopped working. The phone is still on but the screen is not working at all, it is juts black. I was told restoring my phone might solve this problem so i plugged it into iTunes. When I click on the restore iPhone button a message popped up saying I needed to turn off 'find my iPhone' in phone settings for the restore to be go ahead. Problem is I cant access my phone!
    I went onto my cloud account to see if i could do it from here but it doesn't seem to be doing anything. Any ideas?

    From your iCloud account, you can go to Find My Phone and remove the iPhone from your devices list which will release it, or you could do a remote erase of the iPhone from iCloud.

  • My Sling Player Does Not Work Remotely on Fios Networks

    My sling box is set up locally on a high speed internet in LA.
    I have not been able to use my sling player remotely on any FIOS Network.
    Other friends have used my computer to connect to their Sling Box and it has worked fine, BUT their Sling Boxes are set up locally on FIOS networks. Mine is on DSL.
    btw, it does work remotely on a cable network.
    My question is,
    "why would sling player not work remotely on a FIOS network, when the sling box is set up locally on a DSL line?"
    "Are there any settings that I could change on the local router that would make this problem go away?"
    BTW my router is Westell A90
    Thanks

    Sound like you don't have port forwarding enabled in your Westell A90 for the slingbox.
    You would need to go into admin on the Westell router and enable port forwarding for the relevant port to the ipa address of the slingbox.  I believe some slingboxes can attempt to do this for you in their configuration.

  • HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

    touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

    Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

    Yes. They'll still replace your iPod. Several users have indicated that they have returned damaged iPods and were still given a replacement iPod.
    B-rock

  • HT1212 I am trying to restore a phone that the screen does not work on, therefore I can't input my password.  How can I bypass this and upload it to itunes?

    I am trying to restore a phone that the screen does not work on, therefore I can't input my password.  How can I bypass this and upload it to itunes?

    You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.

  • I have an ipod touch 3rd generation and the whole touch screen is not working.

    I have a 32gb ipod which I bought for fifty dollars and when i bought it had a pretty baddly cracked screen but thing is it worked fine. Every part of the screen worked fine; it was as senstive where the screen was cracked as the areas of the screen that were not cracked. I dropped it a couple times from like two or three feet on two a hard wood floor about four times all it did was make the cracks on the screen a little worse. Then one day I dropped it from about a foot and now the whole touch screen is not working does anyone know why this is. They told me at the ipod store to get a new one would be 130 to trade mine in. But the thing is I very mechanically inclined and I am very good with electrionics; I was planing on buying the glass for fifty bucks and putting it on myself because I read how to do it and I am more then capapble of doing it. But now since the touch screen is now working; do I need a new screen along with a new glass? See the thing is because I think both those part cost 120 together. Which would not be worth me doing that when I can go to the ipod store and they would trade me a new one for 130 bucks. But the issue is, they told me at the ipod store they would have to look and see how damaged the ipod is to see if they will exchange it. My screen is severly cracked; also I have a dent that is a half inch long and 1/8th inch deep in the back of my ipod and its very scracthed up; do you thing an ipod store would exchange it in the condition it is in. Also has anybody had this problem before and I was wondering if it would be possible for me to take it apart and fix it my self without buying any new parts.

    If I were you, I would pay the $130 for a replacement. Then you can be sure that it has all the working parts it needs.

  • My 5800 touch screen is not working properly.

    Hi,
    Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
    Thanks in advance,
    Tarun Konduri. 

    Tarun_Konduri wrote:
    Hi,
    Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
    Thanks in advance,
    Tarun Konduri. 
    Tarun_Konduri wrote:
    Hi,
    Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
    Thanks in advance,
    Tarun Konduri. 
    Dear all,
    I had the same issue with my nokia 5800, finally I found very interesting thing, I have been doing everything to bring my phone back to original  condition where simply I can touch and access the phone.
    Actually the issue was with the thin plastic piece which was put on the touch screen for its protection. I was struggling to touch and access the phone but i coudnt for almost 2 weeks, it was directing me to bottom left corner touch buttons of the phone and automatically opens and activate functional which I didn't want.
    Solution was, I simply removed the thin plastic layer from the phone , Now it works fine.
    Hope this will help.

Maybe you are looking for

  • SMS app on iphone

    I am using Skype App to send international SMS. However, it sometimes sent via carrier instead of skype so I got charged expensive fee. Is there any way that I can set on the app only send via skype? Thanks

  • Problem in running instance of oc4j

    Hi i am using Jdeveloper 10g for developing J2EE application. In order to debug my JSP code, I wanted to start the OC4J instance. For that i went to <JDEV_HOME>\j2ee\home and ran "java -jar oc4j.jar" command in the command prompt.The server started,

  • How do I move folders and albums in iPhoto on my MacBook Pro to my ipad?

    How do I move folders and albums in iPhoto on my MacBook Pro to a new iPad Air?

  • Hyperlink in ALV

    Hi All, I am using radiobuttons to display to different field catalogs in ALV Report. Instead i want to display an hyperlink in the grid display and when i click on that it should display the other field catalog. Can u help me on this. Thanx in advan

  • ITune does not remember my purchase anymore - all apps now list price as if I never purchase them

    During chrismas, I discovered several games I previously bought are now listed with full price, even after I went into the info page of the game. Why is this happening? Now every game I have ever bought are all now listed as full price so there is no