Screen pivot sticky on macbook pro

Ok so I've just spilt some champagne on my macbook pro...everything is working fine, all dry, up to speed as I acted quickly and tilted all the remaining liquid off macbook. However, whenever I open my macbook or adjust the screen by pulling it forward/backward, there is a sticky noise so I can tell there is some dried up champagne.
This is horrible, any ideas on how to get rid? Have wet a cotton bud and put it around the black pivot and bottom of screen but still there.

Liquid damage is not covered under Apple's standard 1 year warranty or Apple Care.    
NOTE:  If you are out of warranty and purchased the computer with a credit card, discuss the warranty issue with the credit card company which you purchased the computer with.   They are the only ones who can at this point cover the computer after it goes out of warranty with the manufacturer (Apple).     If you have Homeowners insurance, place a claim with them.
DIY instructions - Immediately disconnect all peripherals, power cord & remove the battery.  Turn the computer over with the lid partly open and the hinge facing upward to let the liquid drain.  Do not flop it over and lay it flat - you want to separate it from the moisture.  Place paper or cloth towels under the machine to sop up the mess. After the computer disgorges whatever you spilled on it, don't turn it on for 72 hours or longer.  You want to computer to dry out completely before turning it on again. Some users here swear by hairdryers.  Blow drying the innards may bake whatever was in the liquid onto delicate computer components.  Better to let the computer air dry.  Use plain tepid water to clean out the computer.  If you spilled iced beverage more than likely this ice fried the hot motherboard. Sugary, acidic or milky drinks will almost always cause problems later on as the residue starts slowly corroding the computer innards. Swab down any sticky parts with distilled water or denatured alcohol.  If none of the above works, you will need to take the computer to a repair shop. 

Similar Messages

  • How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

    How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

    I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side.  E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

  • How do I take a screen shot on my macbook pro?

    How do I take a screen shot on my macbook pro?

    Press the Shift, Command, and 3 keys to capture the whole screen.
    Press the Shift, Command, and 4 keys to capture a draggable part of the screen, or follow it with the spacebar to capture a window.
    Open the PNG on the desktop. Alternatively, combine either of the above with the Control key to put the screenshot onto the clipboard instead of the desktop.
    (104403)

  • I can't unlock the screen to access my macbook pro. When I enter the password it just jiggles. I'm not getting an error message, so I'm pretty certain that the password is correct. Any suggestions?

    I can't unlock the screen to access my macbook pro. When I enter the password it just jiggles. I'm not getting an error message, so I'm pretty certain that the password is correct. Any suggestions?

    I already checked that one.
    I'm baffled, especially since it will usually give you the Invalid user name or password entered message. I'm not getting that. Instead the password field just jiggles back and forth. Very odd.

  • The plastic hinge between my screen and the computer (macbook pro retina) is cracked and doesn't hold the screen anymore? Can Apple change it?

    The hinge between my screen and my computer (macbook pro retina) has cracked and doesn't hold the screen anymore. Can I fix it without changing my screen. And if it's still on guarantee does Apple have to repair it?

    Apple can fix any and all of their computers.  Whether it would be charged to you would be the question.   Do you have AppleCare?
    Accidental damage is not covered by AppleCare.
    How old is this computer?

  • Replace the Glossy Screen with the Matte Screen on a 2008 Macbook Pro?

    Can you replace the Glossy Screen with the Matte Screen on a 2008 Macbook Pro?
    Where would I get a Matte Screen for a reasonable price if I could change it?

    There are a number of issues you should consider before embarking on this project.
    1. If you have a late-2008 unibody MBP, you are undoubtedly aware that there was never any anti-glare option offered for that machine. So there is no anti-glare display that was made to work with it.
    2. If you choose to replace only the LCD panel and not the entire display assembly — which is probably feasible but involves a great deal of painstaking work — you will also need to buy (separately) the aluminum bezel that takes the place of the glossy cover glass panel in models that came equipped with the nonglare screen. The bezel covers and protects the edges of the LCD and the delicate electronic connections there, and hides all that from view.
    3. If you go that route, you will have to make sure that the cabling related to the display you are installing is identical to the cabling related to your original display. This means checking to make sure the cable lengths, connectors and routing both within the display assembly and hinge cover and within the lower case of the computer are all the same.
    4. If you choose to replace the entire display assembly with one that contains a nonglare LCD, you will have the entire, intact glossy display assembly available to sell afterward. If you replace only the LCD panel, the LCD and glass cover panel that you remove will have much less resale value and are likely to be much harder to sell at all, because you won't practically be able to offer any warranty with them and because there are probably far fewer people willing to tackle the fussy, risky display disassembly process than are willing to replace the whole assembly as a unit.
    5. Even if you choose to replace the entire assembly, you will need to verify that the cables dangling from the replacement display assembly are the right lengths and have the right connectors to tie into your lower case properly. Because the assembly will have come from a later MBP model than yours, cable routing and connectors may have changed from one to the other.
    If this all sounds more daunting than you were expecting, you may want to consider just applying a nonglare film to the glass covering your present screen. If you aren't happy with the results, you can fall back on the replacement option.

  • Non-Glossy screen for the 13" MacBook Pro...the 13" MacBook Air has it!?!?!

    Sorry if this has already been discovered, but I just realized.....Why isn't there a Matte option for the screen on the 13" MacBook Pro? The 17" has always had it with an upgrade, the 15" now has the option for the upgrade, but why not the 13"??? I was trying to think what it would look like and then realized.....it would look like the MacBook Air......RIGHT? Because the MacBook air doesn't have a black frame around the screen, and its not glossy, and is the same 13" 1280 x 800, so why not bring that option to the MacBook PRO? (On second thought, I'd also like to have a 1440 x 900 option even though the fonts will be even smaller! lol I love screen space!)

    As someone with 20 years professional experience in digital imaging, both in video and stills, Photoshop retouching, Quark press work, and working with everything from Binuscan to Shake, having supervised thousands of press checks and taught thousands of personnel in everything from Newspapers to video Post-houses as a consultant and trainer, I love the glossy screens for the color saturation, rich blacks and fine detail rendition.
    That said, the many years of glossy Sony, Barco and Mitsu/Lacie CRT screens have taught me to use hoods and proper lighting; this goes for matte LCD screens as well, where ANY pro color-critical work should be done with a hood, such as the Hoodman or Think Tank products. That said, I have no problem in airports, outdoors, etc. using any of my glossy screen MPS, I find a properly calibrated glossy screen on these to be, at least with the latest iteration of the glossy screens available on the Unibody MBPs, eminently usable for pro color work.
    The point is, at least for me, that anyplace I'd need to worry about glare and reflections on a glossy screen MBP, I also have to worry about the same on the matte screen. For example, my wife now uses my previous generation MBP matte-screen 15" LED backlit model. This is the case when I use hers when out and about. Pro work CAN and IS done by many pros who PREFER the glossy screen MBPs to their matte screen counterparts, and manage to get pro quality work done more easily on them, as it suits their taste, and somehow manages to produce results avery bit as professional as pro users on matte-screen MBPs. I know I'm in the minority here, with regard to pros who prefer glossy screen MBPs to matte-screen ones.
    Since I am, after all, in the pro minority, I agree that Apple NEVER should have removed the matte option, and I'd be happy to have, and think it's the ethical thing to do, Apple not only offer matte screens on all laptop products from now on, but that they RETURN to making glossy displays on MacBook Pros (and MacBooks, for that matter) an EXTRA-COST OPTION, and make matte screen displays the standard. That's the fair and logical thing for Apple to do, and I wouldn't mind at all paying for being in the Pro minority by paying an extra $50.00 USD, or even $100.00 over a standard matte-screen display in any and al of the Apple laptop line.
    The matte screen's no longer what I use on my laptops for pro work, and i prefer it that way. But I know, too, that if Apple suddenly yanked the glossy displays with NO Option AT ALL of buying a MBP with a glossy display, I'd be freakin' livid. So I empathize with those pros, and anyone else, who prefers matte screens but who've been unfairly 'locked out' by Apple from paying the same as glossy screen laptops on the 15" and the 17" UMBPs and having NO glossy option on the 13" UMBP. Makes no sense at all, to quote Husker Du. ;^) BUT- pros who prefer the glossy display MBPs (I've owned all 3 unibody MBPs, with and without the superior quality latest-generation displays- the 13" MBP, the 15" MBP and the 17"), should, IMO, have at least the option to purchase the glossy display, at least as an extra-cost option. THAT would make the most sense, since the majority of pros who use UMBPs prefer the matte screen, and that vast majority should not only have the matte-screen option, but the matte-screen discount as well!

  • Glossy Screen Low Down on MacBook Pro!!

    I am reading threads that have people that have the glossy screen option on the MacBook Pros. To those that have them can you please give a really detailed description of this screen with comparisons to the antiglare coating screens and the MB glossy screen. Can you also if possible post as many pictures as possible of it in as many different lightings as possible, and if possible the same exact shot with an antiglare coated screen (maybe an apple external display) for comparision. And can someone comment on the ability to read text off of this screen does it hurt your eyes after an hour of looking at it.
    Thanks (I am deciding between gloss or no gloss 17 inch MBP)

    Pictures probably won't help you make a decision. It is difficult to see the differences between the two with pictures. Why not just check out a few PC notebooks with the glossy screens? I used to own a dell xps gen 2 with a 1920x1200 glossy screen and it was glorious, but the glare was a bit annoying. In reality, I didn't really notice much of a difference playing games; it was only in the windows applications that things looked alot better.
    Generally, you'll like glossy if you: Like super bright and contrasty colors, don't use your computer for hours on end and use your computer in a controlled lighting environment. Please realize that you will see glare at some point. There are lots of website that have reviewed the MB glossy screen, why not search for them on google? Arstechnica.com was particularly annoyed with the screen.
    Go matte if you plan on luggin the sucker around everywhere and if you plan on doing photo work. I didn't calibrate my MBP screen and my print results are very simliar to what I see on screen! The colors will not be a bright and punchy, but you will have a very nice looking screen!
    I prefer the matte now, easier on the eyes and more versatile. Besides, I can always get a big glossy screen and throw it on a desk.
    I'd say if you don't know, just for for the matte
    good luck

  • There's a soft white dot on the screen of my new MacBook Pro Retnia

    There's a soft white dot on the screen of my new MacBook Pro Retnia That is visible especially when the background is light. It isn't a sharp dot but rather a soft blurred looking dot. Does anybody else have something like this or does anyone know what it is? I'm thinking its s dead pixel but it doesn't look like one that i've seen on other lcd displays.
    I set my desktop background to a 50% grey and that's how I found it. Now that I did, i can't stop looking at it. I tried to take a pic of it its in the center of the photo. Its not easy to see on the photo but, its very easy to see on the display. Oh and its not dirt or something on the surface. Not sure if i should go to the genius bar on it. I am worried that it may get worse. Any input is appreciated.

    I also had this problem, same make and model and specifications as you have. Brought it into Apple and also called them about. They stated they have not heard of this yet although I find that hard to believe with the # of cases on this being reported. Must have been a bad lot or batch of Retina MBP's that were made and this got by quality control. But they were okay with giving me a new one on the spot.
    As you said, doesn't show on darks but on whites; oh boy it sure does and it is annoying on photo editing and documents where white is all you see; about 1.5mm x 1mm big and bright like a little star. Very hard to detect at first unless you have the white background up as wallpaper.
    I sent my MBP back for a replacement and told them I did not want a repair on a computer that was less than 3 weeks old. Stuff happens and no one is perfect so long as Apple and their resellers stand by and make amends by issuing new MBP's. I did not buy mine via Apple direct this time, but rather used a authorized Apple reseller and fortunately they agreed to issue a new one. Keeping fingers crossed.

  • How do you do a screen shot with a MacBook Pro?

    How do you do a screen shot with a MacBook Pro?

    Use this keyboard key combination:
    Shift + Command + 3 [⇧⌘3]. The file will appear on your desktop as a JPG file (default).

  • Will there be an anti-glare screen for the new MacBook Pro?

    will there be an anti-glare screen for the new MacBook Pro?

    Hi j,
    Apple rarely announces upcoming hardware upgrades, so we'll probably just have to wait and see if that's something that happens in the future with the retina line. In the meantime, you can express your desire for one here: http://www.apple.com/feedback/

  • How to do a FULL page screen shot on my macbook pro?

    How to do a FULL page screen shot on my macbook pro? (Not the command+shift+3 or 4 to take a picture of just what your seeing) If anyone knows, please fill me in....thanks

    Google "How to take a screen shote in os x". This is what you get.
    https://www.google.com/search?q=how+to+take+a+screen+shot+in+os+x&oq=how+to+take +a+screen+shot+in+os+x&aqs=chrome.0.57j62l2.10738j0&sourceid=chrome&ie=UTF-8
    And this is from apple. Right at the top of the list.
    Action
    Shortcut
    Take a picture of the whole screen
    Command (⌘)-Shift-3
    Take a picture of part of the screen
    Command (⌘)-Shift-4, and then drag the crosshair pointer to select the area. Continue to press the mouse button, release the keys, and then press Shift, Option, or the Space bar while you drag to resize the selection area. When you are ready to take a picture, release the mouse button.
    To cancel, press Escape before you release the mouse button.
    Take a picture of a window or the menu bar
    Command (⌘)-Shift-4, press the Space bar, move the camera pointer over the area to highlight it, and then click.
    To cancel, press Escape before you click.
    Take a picture of a menu, including the title
    Click the menu to display the menu commands, press Command (⌘)-Shift-4, and drag the crosshair pointer over the area.
    To cancel, press Escape before you click.
    Take a picture of the menu without its title
    Click the menu to display the menu commands, press Command (⌘)-Shift-4, press the Space Bar, move the camera pointer over the menu to highlight it, and then click.
    To cancel, press Escape before you click.
    Not sure what else you want but that first shortcut take a SS of the complete screen. If you want to take a picture of the screen then you'll need to use a camera of some type.

  • How do I migrate from a 2008 MacBook Pro without a screen to new 2014 MacBook Pro?

    How do I migrate from a 2008 MacBook Pro without a video screen to a 2014 Macbook Pro?

    Use your backup drive instead. No backup drive, then get a monitor and connect it to your computer. Or take the whole shebang to the Apple Store for help with the transfer. Or you can remove the drive from the old MBP and put it in an external enclosure.

  • Green screen issues on my macbook pro 2008

    My screen on my 2008 macbook pro 15 inch sometimes goes green and than come back to normal after about 15 minutes. anyone have any idea on my issue is
    Thanks
    Vinceg5837

    See Article: http://support.apple.com/kb/TS2377 MacBook Pro: Distorted video or no video issues These computers were manufactured between approximately May 2007 and September 2008

  • Where can I purchase a LED screen for my 13" MacBook Pro?

    My 2009, 13" MacBook Pro screen needs to be replaced. It fades to white minutes after I boot up. Apple charges over $400 to replace a screen. Or they will outsource the replacement for $250. I have been repairing all my computers for years. I don't want to pay out a bunch of money for something I can do myself.  I can't seem to find a reputable dealer who sells the correct LED replacement screens for my Laptop. Will somebody here give me the names of places where I can buy a screen? Thanks in advance for your help.

    See either...
    http://www.ifixit.com/MacBook-Parts/13-Inch-Unibody-LCD-Panel/IF163-024
    ...or...
    http://www.ifixit.com/MacBook-Parts/MacBook-Unibody-Model-No-A1278-Display-Assem bly/IF160-002.
    Depending on your actual needs...
    Good luck,
    Clinton

Maybe you are looking for

  • No Internet Access ASA 5510 with Site to Site VPN

    I have inherited an ASA5510. We have configured a site to site VPN between it and a Juniper SRX550. The Site to Site VPN works fine but users behind the ASA can not see the Internet. I'm pretty sure I'm missing something. Any help would be greatly ap

  • How to increase font size in RH UI?

    Hi, I'm trying out a new "widescreen" monitor. It's native resolution is the only one that looks half decent, but it makes the words in the RoboHelp user interface smaller and hard for me to read. I'm talking about the font used in the Project Manger

  • Direct procurement & plan driven procurement

    Hello experts, i have the following basic questions - 1- is the local PO in extended classic scenario contain Purchase org info? how the Purchase Org is determined ? 2- is Direct material procuremnt  can only be used in case of Extended classic scena

  • Dbms_scheduler

    hi ,      what's up,guys?i need your favor,i scheduled my materialized view for refreshing using dbms_scheduler but it is not updating my view whenever there is an update in my table,kindly help. thanks in advance. sql>CREATE MATERIALIZED VIEW LOG ON

  • Address Labels and Merge?

    Is there a way to produce address labels and do a Mail Merge from a database with pages? I have Filemaker 9, and would like to do a mail merge to customize letters. I know that I can make address labels from Filemaker, but I would like to know if I c