Screen Preview Error

Ok, I'm getting a problem when I hit the spacebar in Bridge CS6. Instead of viewing the image full screen, I get the attached screenshot. The same thing happens when I enter review mode.
I'm using Mac OS X 10.7.4 with CS6.
thank you

JeffSydor wrote:
I started getting this error again everytime I closed my laptop and put it to sleep while bridge was still running.
I tried toggling that option but it goes back to the error when I toggle back.
Just checking that option and restarting the application fixes the error.
Thanks Curt!
Not a computer expert but offhand I would say that your video card is not "waking up" properly after hibernation. More knowledgable people suggest hibernation can be a risky venture.
If use software rendering works it means your video card/driver is not up to the task.

Similar Messages

Extreme poor quality in full screen preview and exported movie

I have spend evenings and evenings to create the content of a project.
After dealing with error -108 and extreme poor quality in full screen preview and in exported movies (extreme stuttering) I decided to install my iMac new again.
The error -108 disappeared, but the extreme stuttering still remained in full screen preview and in exported movies.
If I make the preview screen in the iMovie browser as big as possible there is nothing to see of any stuttering.
Now I am getting pretty annoyed and have no clue what to do anymore (how to solve this problem) .....
Anyone any suggestion ?
The orginal video was recorded with a Panasonic HD camcorder.
I do have a mid 2011 iMac with 16GB ram and 256GB SSD and 1TB HD with a complete clean installation
of OS X Lion and iLife. This configuration should be enough to create a proper movie :-(

mantralightroom wrote:
why is it this option disabled? do the generate monitor sized previews increase a lot the cache a lot!
Potentially, yes. The standard Preview is 1024 pixels, longest size. Some people (like Omke) have displays 2560 pixels longest side, potentially increasing file size by over 500%.

Lock Screen Preview

Hello,
I have been trying for the past hour to change my lock screen preview. For some reason, when I turned on my laptop today, it had changed the lock screen to a picture that looks like a beehive. I want to change the lock screen to a picture that I have saved on my laptop. Every time that I try to do this under settings and change pc settings, the image never loads nor will it let me select a default theme that comes with the computer. When I try to do the picture option, it shows the pink loading dot circle thing and it never actually loads my picture into the preview. I have tried restarting my laptop, yet I still experience the same problem. Can anyone help me fix this problem? Thank you.

@mwebb21
Can you verify for me the full product number and OS version of your notebook? Please read the following documents if you need help in finding those.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Normally I ask that first if someone does not include it in their original post, but it seems I must have been distracted somehow. Oh well, such is life. Anyway, once I have that info, I will be better able to target my answers for you.
A few other quick questions, when you try to make your changes are you logged in with an account with administrator access?
Also do you have a screen shot of the exact error that you got when you tried to change the lock screen image?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Can't check photos to import in full screen preview

Hi All,
Bit of a frusting bug, unless I misunderstand it, but when I import photos using Aperture from a SD card, I can only do so in the tiled view (max 9 photos to a screen on my 21" Mac)
I'd much prefer to select the files to import in the much larger single photo view so I can see them better before deciding to import.
As in the screenshot above, there is a check box in the single photo preview, to the bottom left, but it doesn't seem to do anything. Only photos checked in the list or tiled view are added to the photos to be imported.
Any ideas why this doesn't work (or what the check box in the single photo preview is for if not this??)
Thanks in advance.

Just to be clear, it might be easier to screenshot!
I tick the checkbox in the large import preview - notice the import checked remains greyed out - it doesn't recognise it:
If I then go back to the grid view. The photo is still checked, but Aperture still doesn't recognise that it is to be imported:
However, if I stay in the grid view, remove the tick and add it again, Aperture import does recognise it and adds it to the import list. I can now use the import button.
Not the end of the world obviously, but when going through hundreds of photos, it would be very handy to scroll through full screen previews with the arrow keys so I can see them better and check them to be imported as I go.

When i try to open photoshop this shows up Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 16

i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank you

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

Report Admin - Print Preview Error

In reports admin, I get the following error when I select print preview:error marshalling arguments; nested exception is; java.net.SocketException; Socket write failed.Any ideas?

Hi
Are you using crystal wave a third party add or the crystal report add on provided by SAP.
1.Are all your user facing same issue ?
2.Did it happen to only item or it is happening to all ?
So far looks to me ,some fields have been deleted from template. It might be the cause .
Hard to troubleshoot if it is coming from addon ...
Well try restoring a default template (if you have ) or some other layout to test the issue.
Thank you
Bishal

How can I remove the recent pages which appear in the windows 7 screen preview

by the windows 7 screen preview I mean the little preview screen who popup when I right-click the Firefox buttom in the Windows task bar.
I do not ask about the browser History from the browser menu.
Thank you,
Pascal

You can disable the Taskbar preview by setting the pref browser.taskbar.previews.enable to false on the about:config page.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
See also http://kb.mozillazine.org/about%3Aconfig

Full screen preview and slideshow are blurry / fuzzy

Hi folks-
I just upgraded from CS2 to CS4, in part to improve efficiency of selecting photos - I wanted the zoom and loupe features. Unfortunately a very basic function has been compromised and I'm hoping there's a solution: In both full-screen preview and slideshow the full-screen image is notably blurry. This is a problem for two reasons: 1. I can't judge pictures accurately by just flipping through them in full-screen mode (without zooming to 100% to see if they are well-focused). 2. I can't use Slideshow for, well, slideshows. I've had to resort to keeping another app (like Windows Picture Viewer) open just to be able to quickly flip through and evaluate images full-screen or to show slideshows.
I've tried setting all the options related to image quality (they mostly have to do with caching thumbnails and speeding 100% viewing); I've tried purging the cache files. Nothing helps.
Any ideas? Thanks!

It seems to me that there is something wrong with it.
I am trying Bridge CS4 as a viewer for my JPEG files.
I also noticed that the previews were fuzzy. I activated the high-quality previews as well as the option to generate the previews at screen size.
Here's what I noticed. I went to check out a specific photo that is quite sharp with a number of straight lines, angles, details, where it's very easy to detect a lack of sharpness. That photo immediately looked fuzzy to me, which didn't jive with my memory of it. I quickly opened it in other viewers, which displayed it as intended with all the expected sharpness.
So, I went through the settings to see where the problem could be and I immediately thought of checking the box to get software previews instead of hardware, restarted the app, purged the cache, tried again. There my photo had recovered its sharpness, or at least most of it. I thought I found the culprit, but not quite.
I went to browse other photos and found one in particular with a lot of fine detail (hair) and that photo also didn't display all the sharpness that it should have (I was still using software mode). The difference was very slight and to make sure of it it required A/B comparison between Bridge and PS, but there was a difference.
Now I tried the opposite. I went back to hardware rendering mode, restarted, purged the cache, tried again. That second photo looked alright in preview, but the previous photo looked fuzzy again.
So, it doesn't work the same way for each photo...
What's the main difference between the first photo, obviously fuzzy in hardware mode, and the second one, alright in hardware mode but slightly fuzzier in software? The ratio. The first one is a vertical photo, the second one is horizontal (close to square).
I quickly checked other vertical photos and they showed the same behavior...
Now staying in hardware mode, I noticed something else. When I preview the vertical photo and click on it, or double click, it quickly jumps, switching between 2 versions of the photo: the one displayed originally (fuzzy) and another one, with a very slightly different size, which is sharp. During that manipulation it also briefly displays "100%" at the top of the screen. It doesn't stick when you click and immediately switches back, so it looks like a glitch.
Now in software mode, I tried the same, this time you can click once on the photo (which is originally displayed *almost* sharp). When you click once, it displays "100%" but also displays a very slightly smaller version that is clearly fuzzy. Clicking again goes back to the other, less fuzzy one, but doesn't display "100%" this time.
Doing the same test on horizontal photos shows no change that I can see.
So, it seems to me that in the preview mode, Bridge has trouble displaying some photos (vertical ones?) in their actual resolution (100%)
and since there is a slight resizing going on, it brings fuzziness. This doesn't explain the very slight fuzziness seen on horizontal photos in software mode.
Now I'll mention, for those still awake, that I saw no fuzziness on the same vertical photos when I go to Review Mode with *hardware* rendering. Photos there are sharp. Now if I go to the review mode with software rendering enabled, vertical photos are not 100% sharp (akin to the small difference I mentioned earlier while in software mode), while they are sharper in preview.
To sum up, it seems that the only configuration that gives me consistently 100% sharp (=as they were meant to be after post-processing) photos no matter what their orientation, is when I stay in hardware rendering mode and use the Review Mode, instead of preview.
This all really smells like a bug.
For info, I am using Windows 7 and an ATI HD4850 card, and this only about processed JPEG files, not RAW files.
Perhaps the preview is really meant as a quick preview and not a tool to view final photos at 100% accuracy...

Full screen preview drops frames

Hi all,
A continuation of the thread I opened here (with hardware specs for information):
http://forums.adobe.com/thread/657008?tstart=0
Whilst I resolved the tearing issue secribed in the previous thread I still can't get smooth playback on the third full screen preview display and I'd like some basic advice as to what I could do:
A couple of things I have tried - firstly I tried a basic sequence with a spinning graphic (in order to rule out any issues with disk/network access), and then also tried two screens rather than three (so only one graphic card was in operation), a 60p/30p project with screens set to 60Hz and a 50p/25p project with screens set to 50Hz.
All to no avail - the full screen preview drops frames, especially with 50p content - 25p is better but every 20 seconds or so frames are dropped. Audio is always fine, regardless of the source, BTW.
As a reminder, this is a 12 core i7 with 2 x Quadro FX3800, all unnecessary services disabled, 12Gb RAM, CS5 5.0.3, latest WHQL Nvidia drivers.
Not sure if 5.5 improves this in any regard as I'm still waiting for my licence key.
Video playback outside of premiere is perfect, 1080p50 plays fine full screen on any display through windows media player/VLC.
Any suggestions please - again I wonder if a Blackmagic Intensity or similar would help?
Has anyone else seen this behaviour? Could anybody have a go a reproducing the issue (a simple spinning or sliding jpg demonstates the issue easily and simply)
Thanks all
Sacha Goodwin.

There exist no 12 core i7's. The max is hexa-core, but in your previous thread you said Xeon X5670. So what is it?
Well spotted, my bad - it is indeed 2 x hexa-core X5670's - which of course is 12 cores in total.
I still suspect your Editshare NAS.
I'd say unlikely since - we've replaced it with something else, also:
I tried a basic sequence with a spinning graphic (in order to rule out any issues with disk/network access)
and at any rate I tried it as a local project on local disks and it made no difference.
For graphic read plain color matte and basic SD res JPG (same results with either)
What happens when you increase memory to 24 GB?
No idea as I don't have access to any - strikes me as odd though to think anyone would need 24Gb or RAM just to display a rotating still smoothly.
Premiere is showing 300Mb of RAM, total RAM in use when everything is loaded and running is 3Gb, 9Gb free sitting there twiddling it's virtual thumbs.
BTW I should also mention that this happens even on SD projects, not just HD ones. Also watching the task manager shows virtually CPU usage, no disk and no network access during playback (as I would expect). No peaks in any graphs correllating with the dropped frames. Also enabling/disabling MPE Hardware assist makes no difference.
Sacha.

Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se

I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP: c000021a {Fatal System Error}.
                                                            The verification of a KnownDLL failed. system process terminated unexpectedly with
                                                             a status of 0x0000221 (0x007fb9c0 0x00000000).
                                                             The system has been shut down.
I do not have recovery disks for this computer. I tried to order them but them seem to not be available. This is my daughter's computer. She says she started to have trouble after downloading Frost Wire (music share) and then she removed it. We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
This question was solved.
View Solution.

Hi,
Assuming your in the US, recovery discs are available to order for that model here. That may be the best option.
You should also be able to do a recovery without the discs as well. Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible. This should allow you to recover the PC.
R
Although I am an HP Employee, I am speaking for myself and not for HP.

My macbook13in has a blue screen with error code 10813

my macbook 13in has a blue screen with error code 10813

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Restarting After a Blue Screen Stop Error

I have received a Blue Screen Stop Error on my Toshiba Satellite 5200 Series laptop.
I could report it here, in full, if that would be helpful. However, it begins by telling me to restart the machine but the unit's Power button is not allowing me to switch it off.
What action should I take ?

Crikey ! Someone at another forum just told me to hold the button down for 5 seconds..... and it worked !

Satellite A350 - Blue screen with error message

When starting windows7, I am getting blue screen with error message 0x0000116.
Can anyone assist please?

It looks like a graphic card driver is a trouble maker.Try to reinstall a graphic card driver in safe mode (f8 on startup). Read this article for information:
http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/eb584685-6b8b-4ad7-b6cc-ae5ee78095fb
It's for VISTA but should be the same for win 7 too.

Blue screen fatal error messages - laptop always crashes and now won't even let me restore

My dv6920ea laptop has developed a fault and keeps crashing with blue screen errors, such as "IRQL_NOT_LESS_OR_EQUAL". The problem has become so bad that it happens everytime I turn the laptop on. The laptop ran "Windows memory diagnostic tool" which said that there was a hardware fault. I've tried running a full system recovery to factory setting but sometimes the laptop crashes, and when it doesn't it asks me to insert a windows disc, but my laptop didn't come with one. The laptop is a year and a half old. What can I do to fix this issue? I don't mind completely recovering the laptop to factory settings and I have most(!) of my files backed up.

Hello djbless,
You’re getting blue screens with error IRQL_NOT_LESS_OR_EQUAL.
Run diagnostics to make sure that you are not having a problem with any of the hardware.
Turn off the computer.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
Go to HP.com and update the drivers, there is a button that says Let HP scan your system for out-of-date and missing drivers and software
Here is a link to the updates.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.

Blue screen with error message

Product Name: HP Media Center M7250n Desktop PC
Product #ED842aa-aba
I have been getting a blue screen with error messages that ask if this is the first time i get the error and then at the end it says it is dumping memory. I would like to wipe my harddrive and reinstall XP but my system is out of warrenty and HP won't provide me a recovery CD. What are my options.
This question was solved.
View Solution.

Hi,
You are most welcome.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Screen Preview Error

Similar Messages

Maybe you are looking for