Screen recording, how to press record after pressing stop?
When I do a Quicktime screen recording, I can pause the recording by use the "alt" key to make the stop button become a pause button.
However, when I click the stop button the recording is considered finished and recording cannot be re-started.
Is there a way to click "record" again after clicking "stop" to add more recording to the end of the video?
Please help with the above question...
Similar Messages
-
HT201066 My screen recording will not stop loading
how do i make it stop? I finished what i was recording and it just says Finishing Recording....
Seeing the white, blue or gray screen with spinning thing for too long is a sign of trouble
It's called the "gray screen" and you can hopefully hold down the Shift key on a wired keyboard when rebooting to let the machine enter safe mode, then backup your data off the machine in case it's a failing hard drive and then go around uninstalling, updating reinstallling all your third party software.
If that doesn't fix it then a #18 Reinstall Just OS X usually does the trick too
go through the steps here one by one or have someone take a look at your machine
Step by Step to fix your Mac
Mac won't boot or "You need to restart"
Create a data recovery, undelete boot drive -
(OSStatus error -108.) | Quicktime Screen Recording
The operation couldn’t be completed. (OSStatus error -108.)
I receive this error message when attempting to use the "screen recording" function of Quicktime X. Cannot find any information on this specific error besides the fact that it is due to insufficient memory, although I don't believe I actually have a memory issue. The "movie recording" and "audio recording" functions still work. Tried another screen recording program named Voila, and while I can begin to record, after I stop recording I end up with a corrupted file. Strange thing is, I tried a third screen recording program, Debut, a free program, and can successfully record my screen (although the video is choppy/essentially unusable). I have been having trouble with my MacBook since I installed a CUDA driver (now deleted), and so I believe this could be the actual root of the problem. Do I need to install a different graphics driver? Any insight is greatly appreciated.
Running Snow Leopard 10.6.8; 2.66 GHz Intel core i7; 4 GB 1067 MHz DDR3; MacBook Pro from 2010.
Intel HD Graphics:
Chipset Model: Intel HD Graphics
Type: GPU
Bus: Built-In
VRAM (Total): 288 MB
Vendor: Intel (0x8086)
Device ID: 0x0046
Revision ID: 0x0018
gMux Version: 1.9.21
Displays:
Display Connector:
Status: No Display Connected
NVIDIA GeForce GT 330M:
Chipset Model: NVIDIA GeForce GT 330M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0a29
Revision ID: 0x00a2
ROM Revision: 3560
gMux Version: 1.9.21
Displays:
Color LCD:
Resolution: 1680 x 1050
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Display Connector:
Status: No Display Connectedpeljmies
You have resurrected an ancient thread by posting in it, and since there was no answer in IT, it may be that your Question would benefit from starting an New Question!!
I would title it something like " QT screen recording crashing with alert "The operation couldn’t be completed. (OSStatus error -536870186.)" "
(Before you post, double check the error alert message text)
Include as much of the following as possible:
Quoted from Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
CCC -
Create a marker during a QuickTime v10 screen recording
I want to be able create markers during a screen recording instead of stopping and starting my recording. EG., hit ⌘m during recording whenever I encounter a spot to make a point of reference. Is this possible?
Thanks!I can't help but wonder why they even botherd making the video recording software if they diidn't include audio .
I tend to consider such features add-ons because to appeal to novice users because the features are incomplete as far as functonality is concerned or too dependent on the CPU power of the platform on which it is used. This is why I tend to use dedicated import and/or screen capture applications. Normally, I would recommend using an app like Snapz Pro X from Ambrosia ($69) but they too are having problems updating or replacing their audio "kernel extension" following system audio changes made in the Lion OS release. ScreenFlow ($99) is another good screen capture app but it includes a number of editing features that many users do not want or for which they are not willing to pay such a high price. I personally amd looking at what, for me, is a new app listed in an article URL posted by QTKirk. The app is called Screenflick and lists for $29. I am interested in it because they claim you can tap into user events like key presses (e.g., use of keyboart shortcuts) and highlight/include them in your captures. (I.e., this would be very handy for the makie of "quickie" tutorials.) In any event, I have not tried this app so I can't yet recommend it based on personal use... but it might be worthing looking at if you plan to purchase such a utility. (And yes, it does claim to support the audio capture of both system audio and/or a user selectable mic source.) -
I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks
Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz -
I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?
QuickTime version 10 can only record the entire screen.
10.1, 10.2 and 10.3 offer part of the screen recording. -
How to read data after select multiple record by checkbox,
hi experts
i m using simple report with check box , and itab whcih contain records
how to read data after select multiple record by checkbox,
thanksHi Prashant,
Try using this logic.This Code displays the list with check boxes. When you check a checkbox and press a button say 'Select All' or 'De Select all' or 'Display'. It will read the data of those records.
DATA :
fs_flight TYPE type_s_flight,
fs_flight1 TYPE type_s_flight1.
* Internal tables to hold Flight Details *
DATA :
t_flight LIKE
STANDARD TABLE
OF fs_flight,
t_flight1 LIKE
STANDARD TABLE
OF fs_flight1.
SET PF-STATUS 'SELECT' .
PERFORM selection.
PERFORM displaybasic .
* AT USER COMMAND EVENT *
AT USER-COMMAND.
PERFORM selectall .
*& Form SELECTION
* Select query to reteive data from SPFLI table
* There are no interface parameters to be passed to this subroutine.
FORM selection .
SELECT carrid " Airline Code
connid " Flight Connection Number
FROM spfli
INTO TABLE t_flight.
DESCRIBE TABLE t_flight LINES w_lines .
ENDFORM. " SELECTION
*& Form DISPLAYBASIC
* Display the basic list with SPFLI data
* There are no interface parameters to be passed to this subroutine.
FORM displaybasic .
LOOP AT t_flight INTO fs_flight.
WRITE :
w_check AS CHECKBOX,
w_mark,
fs_flight-carrid UNDER text-001,
fs_flight-connid UNDER text-002.
ENDLOOP. " LOOP AT T_FLIGHT..
CLEAR fs_flight-carrid .
CLEAR fs_flight-connid.
ENDFORM. " DISPLAYBASIC
*& Form SELECTALL
* To check all the checkboxes with a 'selectall' push button
* There are no interface parameters to be passed to this subroutine.
FORM selectall .
CASE sy-ucomm.
WHEN 'SELECT_ALL'.
w_check = 'X'.
w_line = 4 .
DO w_lines TIMES.
READ LINE w_line .
MODIFY LINE w_line FIELD VALUE w_check .
ADD 1 TO w_line .
ENDDO. " DO W_LINES TIMES
CLEAR w_line.
WHEN 'DESELECTAL'.
w_check = space.
w_line = 4 .
DO w_lines TIMES.
READ LINE w_line FIELD VALUE w_mark .
IF w_mark = space .
MODIFY LINE w_line FIELD VALUE w_check .
ENDIF. " IF W_MARK = SPACE
ADD 1 TO w_line .
ENDDO. " DO W_LINES TIMES
WHEN 'DISPLAY'.
IF sy-lilli BETWEEN 4 AND w_lines .
DO w_lines TIMES.
READ LINE w_num FIELD VALUE w_check INTO w_check
fs_flight-carrid INTO fs_flight-carrid
fs_flight-connid INTO fs_flight-connid.
IF sy-subrc = 0.
IF w_check = 'X'
SELECT carrid
connid
fldate " Flight date
seatsmax " Maximum capacity in economy
seatsocc " Occupied seats in economy class
FROM sflight
INTO TABLE t_flight1
WHERE carrid = fs_flight-carrid
AND connid = fs_flight-connid.
LOOP AT t_flight1 INTO fs_flight1.
WRITE :
/ fs_flight-carrid UNDER text-001,
fs_flight-connid UNDER text-002,
fs_flight1-fldate UNDER text-007,
fs_flight1-seatsmax UNDER text-008,
fs_flight1-seatsocc UNDER text-009.
ENDLOOP.
ENDIF. " IF SY-SUBRC = 0
ENDIF. " IF W_CHECK = 'X'.
ADD 1 TO w_num.
ENDDO. " DO W_LINES TIMES
CLEAR w_check.
w_num = 0.
ELSE .
MESSAGE 'INVALID CURSOR POSITION ' TYPE 'E' .
ENDIF. " IF SY-LILLI BETWEEN..
ENDCASE. " CASE SY-UCOMM
ENDFORM. " SELECTALL
Much Regards,
Amuktha. -
How to show the new table record after creating
I have a table form. After creating a new record to the table, the page go back to the same page. I wanta know how to show the new record after click 'Create' button. Right now, all the items will be cleared.
Thanks.The button submits the page so just create a branch that directs to a new page (which you'll have to create if you have not already done so) after submission which directs to a new page and uses the newly generate PK to display the row you've generated. You'll need to make the branch conditional on that press of the Create button.
Phil -
Quicktime won't respond after screen recording
This is so frustrating, and it happened TWICE!!!
So, I do "Speed-Paints"--which I need a screen recorder to do it--which, are me drawing stuff and posting it to you YouTube. So, as I said, I need a screen recorder to work properly.
The first time it happened:
- I was drawing like I was normally did, and hoped the recording didn't last over 30 minutes. It was actually two hours, whoops. So, I click the stop button to save the recording, and it freezes and I get the (what I call) "Rainbow Spinning Wheel" (Mac's version of Window's hourglass). So, after 5 minutes of Rainbow Spinning Wheel, I wonder what's taking so long. After another 5 minutes, Quicktime crashes. Wasting MY time. Thanks.
Just now:
- I got in the mood to speedpaint, and remembered the last time I tried to record(mentioned above). So I decide to draw in parts, so save time and hopefully not run Quicktime for over an hour. So, I get the sketch and lines recorded(or so I thought). I hide Manga Studio(the program I was using), and click the stop button. Same thing as before, and it's still stuck in Rainbow Spinning Wheel!!! The recording was only 17 minutes, not even!!
So, any suggestions on how I can fix this? Or any recommendations on other screen recordings that won't crash and waste people's time?!
ThanksI've had this problem as well and it's so frustrating! I do speed paints too and it's like you lose all your hard work OTL but I did two short screen record tests and apparently, one with Manga Studio 5 and the other with Photoshop CS6 and it only happened with Manga Studio 5 ;n; I really prefer Manga Studio though and it's really painful... But, good luck to you, I hope this helped!
-
I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.
Did you remove Quicktime X?
On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
You will need to reinstall OS X to get Quicktime X back if you have deleted it.
I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above. -
How do I record a quicktime screen recording directly to an external hard drive?
I want to record a screen recording directly to an external hard drive (or flash drive/SD card) and I've heard that doing so will improve system performance by reducing the workload somehow. I'm not entirely sure.
Is that true, will it work, and how do I do it?
Help would be much appreciated!I think USB is much slower than your internal HDD connection and you might start losing frames. The system itself will do the same job... the only where performance may increase are the actions where you need to read/write from/to the disk i.e. open an app or save file.
-
Would like to record what's on my 24" iMac screen. How?
I would like to record video of exactly what's appearing on my 2008, 24" iMac screen. I would like to have the video saved directly onto my hard drive. I also have usb and firewire external drives available. Any suggestions on how to do this? And instructions please?
Thanks in advance!Open your quicktime application. Under the file menu there are 3 choices pick new screen recording and have fun capturing screen recordings that you can make into training videos or just for your collection.
If you want to capture a picture of the screen hold the shift+command keys together and then hit number 3 to capture the whole screen and the same thing but hit number 4 to make a selection and capture just the selection.
Good luck and have fun.
Rick...
Message was edited by: SlickRick
Message was edited by: SlickRick -
After exporting screen recording, just shows a black video.
I've recorded an hour and a half of screen recorded footage. it plays back just fine. It exports fine too! the problem is, once I try to open it after exporting it to desktop,iTunes etc., it doesn't have audio or video. Just a black screen for the whole duration. it'll still play, but it plays all black, no audio... Ultimately, I just want it on my third generation iPad. It wont play back with iTunes, on my iPad or even with Preview. I've tried exporting it in iPad format and in normal 720P mode. so .m4v and .mov .My iMac is 1080P so I should be able to export a 720P screen recording. I was thinking that was the problem. it wont show video to a 480P video when I exported it 720P.. i didn't wanna export 1080P cause it was like 9 GB! any help please? i've messed around with this for days.
Hi ChuckSott
Some questions to help us help you!
# Which websites are causing this problem? A few examples would be grand!
# Does this problem occur in FF35 for Android?
# If you could post a screenshot of the tab's full display being blacked out that would be super helpful
# Have you tried temporarily uninstalling all the add-ons in Tools -> Add-ons? Sometimes add-ons break Firefox!
# Finally what version of Android OS are you using? (ice cream sandwich 4.0, jellybean 4.1-4.3, kitkat 4.4? etc) -
I just got a Canon Rebel T5i and I was testing out the video and several times it will automatically stop recording after about 6 seconds. How can I fix or disable this?
And while buying said faster card... buy a REPUTABLE brand from a reputable vendor. I've come to the conclusion that there are a lot of fly-by-nights making cards that are not as fast as they claim to be.
Reputable vendors are companies like Sandisk and Lexar. But as an SD card is just a plastic card with a sticker on it, and stickers are pretty easy to fake, buy the card from a vendor you can trust is not selling fakes.
This is one item where it is probably not a good idea to try to save money by finding the cheapest deal you can find on the Internet.
Tim Campbell
5D II, 5D III, 60Da -
How to (visually) crop a screen recording???
OK, QuickTime X is great at making a screen recording, and I now have a 1680x1050 .MOV. Great.
What I want is to crop it, so that the video depicts for example 600x600 pixels in one are of the screen. How do I crop the resulting screen recording to achieve this? Tools readily available include QuickTime 7 PRO, iMovie 06 and Final Cut Express 4. With FCE I achieved a 1680x1050 recording where the 600x600 video played inside a huge black border. No good.Adobe Reader cannot edit PDFs in any way.
Maybe you are looking for
-
mac book pro 17 over £2000 when new in the middle of the night i heard a loud noise found out that my laptop was on the floor looked and seen screen was craked and that what looked to me the battery had exploded coursing it to fall on to the floor th
-
Error in Data in table on pdf form...
Hi experts, I am designing a pdf form in Live cycle Designer in Java Web Dynpro. Now In that form i want to show a table which can contain more than one row depending on the data fetched. Every thing is fine, but the data shown in the table
-
Can't install hp photosmart 7350 series printer on my hp laptop with windows 7 home premium
I am trying to install the HP Photosmart 7350 printer on my HP Laptop (serial number {Removed for privacy}; serial number{Removed for privacy}). The driver was not listed so I searched for a compatible printer. I found the Deskjet 5550 was compatible
-
ABAP client proxy to File scenario
Hi, I am doing ABAP client proxy to File scenario. I have followed Ravikumar allampallam blog i.e https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1387. [original link is broken] [original link is broken] [original link is broken] [original link
-
Weblogic 5.1 Service Pack 9 Issue
Hi, I install weblogic5.1 with service pack 9 on Solaris. However, when I start the weblogic server, the following appears during startup even though the server is started successfully:-[ExternalEntity] : Could not resolve entity '-//Sun Microsystems