Screen remaining black at startup

When starting up my Satellite S55 I can hear the drive running, but sometimes screen remains black. Sometimes it will not shut down if I press the on/off switch or close the lid. Just keeps running with a black screen. I usually leave my laptop plugged in. This computer was purchased in Jan of 2014 and has not been used a lot. Why does this happen frequently?

DanielTZ wrote:
I don't even know where my original installation disks are now
AppleCare will send a replacement set for a nominal fee.
Or buy a retail disk ($29 U.S.)
I have the installation disk from my MBP mid-2010.
The gray discs are specific to the model and build period of the Mac they came with; they won't work on another Mac.
Apple changed the firewire plug from the one machine to the other
You can get a small adapter, or a cable with different plugs at each end. Just so you know what the adapter looks like: http://www.amazon.com/CABLES-FIREWIRE-6-PIN-FEMALE-4-PIN/dp/B000ENY90A

Similar Messages

My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

Now that you mentioned it, that might be the source of the problem. Something was definitely wrong with my graphics card before the incident happened. You mean that particular batch of graphics cards had some inherent issues, right? I went to the genius bar, and the 'genius' there, without trying to diagnose the problem properly, just adviced me to buy a new mbp! He said Apple will no longer try to fix or touch macs older than 5 yrs. Mine is 5.5 yrs old...

IMac g5 screen remains black when turning on

My iMac 2.0 gz ppc g5 froze up while net surfing. I turned off power strip and when I turned computer back on all I hear is the fan running, the power white light is on but the screen remains black. Am I in some weird sleep mode? Or worse? I' m running 10.5.8

Try rebooting in Safe mode:
To start up into Safe Mode (to "Safe Boot"), do this:
   1. Be sure the computer is shut down.
   2. Press the power button.
   3. Immediately after you hear the startup tone, press and hold the Shift key.
      Tip: The Shift key should be held as soon as possible after the startup tone but not before.
   4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

Laptop screen remains black (off) when I turn on the computer

Hello,
Today I came home and turned on my laptop as usual except this time the screen remained black. I can hear the fan running and then the usual windows chime at start up, but nothing to view. The HP logo at the back still lights up though. Just the actual screen remains completely black like it is off. I tried connecting it to my tv via HDMI and to an external monitor but there's no signal. I also tried doing a hard reset which I read about here but that did nothing. I feel as though it's just the monitor won't turn on but everything else might be fine.

Hello @brianh123,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook's screen remains black when your power on your computer, and I would be happy to assist you!
Since the image will not appear on either the notebook or the external monitor, I believe there is a startup issue with your computer. To enable your notebook to power on correctly, I recommend following the steps in this document on Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
If the issue continues, I recommend contacting our technical support at 800-474-6836 for hardware replacement options. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

IMac G5 isight not booting, screen remains black & fans start

Hello,
The iMac in question is a 2.1 G5 20" screen with iSight. It has worked perfectly with no problems up until recently, now when I go to switch on the chime sounds, the screen remains black and after about a minute the fans startup.
I have attempted to reset the SMU and PRAM to no avail.
I did manage (after several attempts) to boot into Target Mode with another mac connected by Firewire. The hard drive shows up and all the files seem to be there. I scanned the drive with TectTool Pro and repaired permissions, I also used Disk Warrior to rebuild the drive. Still the problem persists.
Tried to boot from CD but so far this has been unsuccessfull.
I have read of people having similar problems but have yet to find a working solution but I'm hoping there is one out there as the iMac was working wonderfully right up until this problem!
Thanks in advance

It sounds as if your power supply is failingand/or your logic board. I think it's time to take it in and have it looked at. But before you do that, try running the Apple Hardware Test, on your install disc.

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

Screen Goes Black During Startup (after login)

Hello,
I have a 2005 Mac Mini PPC OS 10.4.11. This is the first problem I've had since purchasing the computer. This problem popped up out of nowhere. The screen goes black during startup just after I login into my account. I can hear the hard drive spin like it is finishing the startup process. The monitor power button blinks green.
I'm using the digital video cable. I tried switching to the VGA cable but the screen then goes black before the login screen.
The computer will startup in Safe mode.
I've tried Disk Utility (repair disk and repair permissions), Techtool Pro, Drive Genius, ColorSync Utility, Reset Pram, installed latest OS updates, and even re-installed the System twice (once because I removed all the Extension files and then the computer would not startup at all).
I've also tried removing cache files, plist files, startup files, preference files, and some or all of extension files.
The only applications I have recently installed were QuickTime Pro and a .flv movie player; both about a week before this problem started. I tried to uninstall them but could not figure out how.
What is the problem? How can this be fixed?
Thanks.
Richard

Howdy. I have Had the same problem as you in regards to a ViewSonic Monitor and the Mac Mini. This is my post:
Monitor failure when switching resolutions
Using Displays with the Mac mini, Apr 1, 2008, Replies: 2
Running 10.5.2 on Mac Mini G4 1.42 Ghz with ATI Radeon 9200, 32 MB VRAM and ViewSonic VX922
When switching resolutions from 1280x1024 to 800x600 or vice versa, the monitor will cut to black and the power light on the monitor switches from solid green to flashing green. Only by combinations of powering down the mini and starting it up again with the monitor on or off will bring the monitor back to life. This problem makes it difficult to play World of Warcraft amongst other games. Any feedback in regards to this problem would be appreciated.
Thank You!
At this point, I am unable to switch Monitor resolutions. If I do, the monitor goes black, and I have to power everything down and wait a while before I can restart.
I've resigned myself to not switching resolutions, but I'm wondering if you've had any luck.
Thanks for your time!
Kevin

HT201412 My ipad screen remains black and show a persistent apple logo.

My ipad screen remains black and show a persistent apple logo. Sometimes it turn on and off automatically every 5minutes. I have already restored iOS software for 3 or 4 times. I have also seen with the apple genius supporter. The problem still remain the same. Does anybody have any suggestion beyond that? I dont know how many people are experiencing the same problems. Why dont apple solve this issue seriously? My rating to apple would become dramatically decreased to zero. I have decided not to buy apple product anymore.

We are not Apple here .. you should bring your concerns to their attention.
http://support.apple.com/kb/HT4623

IMac 24 inch screen remains black

Hi,
iMac starts up in normal way but screen remains black. When I do Screen Sharing from my MacBook Pro I see there's nothing wrong with the iMac ... on my MacBook Pro the normal screen from my iMac is shown.
Please some help?
Many thanks,
Johan

Hi guys,
got the same problem. I've even talked to apple's 2nd level support about it.
made pictures for them and so on. Now the important questions!!!
Are you guys smokers ? I bet you are
Apple's 2nd level support told me that this is caused by smoking infront of the imac.
And their solution to this problem (at least here in germany) is to get it cleaned and tell you to stop smoking in front of it !!!!!!!!!!!!!!!!!!!!!!!!!
Because there are not enough complains about this problem from customers !!
I'm soooo **** !
Please everyone let apple know (call them) that this is a big big problem and they should redesign the iMac's (if it is a design flaw).Or give everyone that has this problem a new one, that doesn't have this problem.
Smokers unit !
See pictures in this thread: http://discussions.apple.com/thread.jspa?messageID=6036577#6036577

Imac a1225 shimes but screen remains black... what can I do?

imac a1225 shimes but screen remains black... what can I do?

Try smc and pram reset.
See if you can boot in safe mode.
See if you can boot from your lion recovery partition to use Disk Utility to repair/verify your drive (not repair permissions).
OS X Lion: About Lion Recovery
Run Apple Hardware Test.
OS X Lion: Use Apple Hardware Test

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H.

MacBook Pro 2008 not turning on, no sign of power and screen remains black

I have a MacBook Pro 2008.
It was working fine until when one morning i wanted to turn it on as usual only to find out that it can not power on.
When i press the power-on button, i can hear the hard disk spinning but no display, the screen remains black like not getting power.
No beep sound when tried to boot without RAM installed.
The battery and the Charger worked fine when tested with another computer.
The RAM works fine when tested with another Computer too.
What could be wrong with my computer, i hope it is not the board that is dead.
How can i overcome this problem?

Op Charles,
You can try a SMC reset:
http://support.apple.com/kb/HT3964
Follow directions for a battery that applies to your machine.
http://support.apple.com/kb/TS1365
http://support.apple.com/kb/TS1367
You can check these as well
It sounds as thogh the the GPU may be dead, you can take it in to an Apple Genius (make an appointment) they will disgnose it for free and give you your options.
Good Luck

My iphone 4 fell in the toilet 4 days ago and it's been drying in rice since. now when i plug it in, the screen remains black but it will vibrate. is this a good sign or is all hope lost for getting it to work again?

My iphone 4 fell in the toilet 4 days ago and has been drying in rice ever since. I tried plugging it in today and the screen remained black but it did vibrate when i switched it to vibrate. Is that a good sign? Or should I just give up hope already?

well good sign or good sign maybe a strong word
it mean that not all of the device have been damaged by the fluid
but it does not really mean that the screen will ever work again
when drying in rice make sure you don't
1 conceal it so the vapor can't escape or it will not dry enough
2 make sure to leave in on a heating source like a heated floor or radiator to speed up the proccess of the vaporising

My iphone died and when I plugged it back in to charge it when it powered on the screen remained black. I can hear when I receive a text and a hear siri. I have tried holding down the sleep and home button

My iphone died & I plugged it back in to charge when it powered on the screen remained black. I can hear when I receive a text and siri. I have tried holding down the sleep and home button and restoring in itunes neither worked. The screen on the phone is cracked but has been working fine until now. Please help!!!

Here's how to perform the restore:
HT1414
If you can actually get to restore, maybe (I estimate a 0.01% chance) you'll be able to do a backup before the restore. Actually, from the symptoms you describe, I suspect a restore won't work either and you'll need to do a recovery.
Just in case, if you need to recover (restore fails), here's how. Note you may have to try to get into recovery mode more than once.
http://support.apple.com/kb/HT1808

My iphone screen is not turning on.when i put it on charging it sounds like it is charging but screen remains black.nothing is happening just i listen sound..plzz help

My iphone screen is not turning on.when i put it on charging it sounds like it is charging but screen remains black.nothing is happening just i listen sound..plzz help...i m using iphone 2g 3.1.3

Did you already try to reset the phone by holding the sleep and home button until the Apple logo comes back again?
If this does not help, try to connect in recovery mode, described here: iOS: Unable to restore

Screen remaining black at startup

Similar Messages

Maybe you are looking for