Screen resolution too high - text is tiny - how to change?

I'm a newbie to Audition, and spent 2.5 hours this weekend editing a 6.5 minute talk. Ended up with a massive headache, largely because of the small size of the text in the screen menues, etc.
Anyone know how to change these? I Use a MS Surface 3 pro with very high resolution (21160*1440)  with a 22" screen set at 1680 *1050 (max for the screen) .
Any help would be greatly appreciated...
Pounding head...
Mike Bland

You don't mention which version of Audition you are using, but support for High DPI displays was added to Audition and other Adobe applications last year.  This adds support for icon and text scaling, which is configured at the OS level.  Found a good overview and write-up about this at How to Make the Windows Desktop Work Well on High-DPI Displays and Fix Blurry Fonts but the quick-and-dirty method is to right-click on your Windows desktop and choose Screen Resolution then click on the item Make text and other items larger or smaller.  There, you can select scaling at 125% and 150%.  You'll probably need to log back into your Windows account for the change to take effect.

Similar Messages

  • Accidental​ly set my screen resolution too high

    I was playing around with screen resolutions and accidentally set one too high and now every time i load up my Computer, it says 'Input not supported' , please help me.

    It would help greatly if you:
    A) Identified the installed operating system
    B) Identified your HP desktop PC. (look on the service tag. Post the complete  p/n
    If your OS is Windows 7, start the operating system in Safe Mode. Press the power button and before Windows begins to boot, start tapping the F8 key. Choose Safe Mode.  In Safe Mode click on the start button and type  msconfig in the search all programs and files box . Click on the msconfig icon that appears above to invoke msconfig. In the msconfig dialog choose the Boot tab as in the following image. In Boot options put a tick inside the box to the left of base video, then click on apply and OK. Restart your PC and  right-click an unused area on the desktop and set your resolution. Choose the recommended resolution.  After you do that, go back to the msconfig and remove the tick mark in the Boot options -->Base video, click on OK and restart your PC. All should be back to normal again.
    The desktop I am using has a dual display setup, so yours will appear a bit differently. the operatng system will recommend an optimal resolution and designate it as recommended.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Please help.   My Adobe InDesign document keeps crashing when I adjust the screen resolution to High in the View menu.  Desperately trying to get my magazines prepared for press today!  HELP!

    Please help.   My Adobe InDesign document keeps crashing when I adjust the screen resolution to High in the View menu.  Desperately trying to get my magazines prepared for press today!  HELP!
    My magazine last month is still working ok - but this month's version has just started crashing for some reason.

    We can't know. You have not provided any system info, not told us what version of ID you use nor provided any specifics about the document like images, color profiles, fonts, paragraph styles and what have you...
    Mylenium

  • Screen brightness too high

    Hello, I have had my first blackberry for a few days now, and I'm in trouble with the screen brightness. I have sensitives eyes ad even at the lowest settings, the brightness is hurtful in dark rooms. It does not seem to be a bug nor a material issue specific to my phone, as most new phones and computers are also too bright. Therefore my question is is there a possibility to lower the screen brightness under the OS preset limit ?I am a developper so even a programmatical solution would be nice.  I have only seen outdated posts about this issue on the Internet, with no solution, maybe the problem could be solved in 10.3.2 or in the next versions ? Thanks a lot

    Okay thanks, it is posted there : http://supportforums.blackberry.com/t5/Native-Development/Screen-brightness-too-high/td-p/3122861. I also thought about always putting a semi-opaque frame on the foreground, as the android ight filter apps usually do.

  • I have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?

    i have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?

    Greetings Lex,
    Kind of you to comment ... but you are also adding years to my signature!   I know I'm 76 but I don't want to think about it. 
    Regards  71.

  • Resolution too high for me

    All of the current Mac Book Pros and Mac Books have a native screen resolution that makes it difficult for me to read without getting a head ache. I do not believe that I have special needs and I am not a senior (in my fourties). However I still prefer my old 1.67 GHz 15 PB with the 1280x854 resolution. In fact I was lucky to get one of these old ones. I really wanted to get an Intel book when they came out but I could not deal with that resolution. I actually had to return it. Reducing the resolution does not work either since only the native screen resolution looks sharp and crisp. I just came back from the Apple store since I really want to get a Mac Book Pro now. I thought that maybe the 17 inch would be better for me. Unfortunately its the same problem. Reading the menu items alone gave me a head ache. These computers seem to be made for teenagers. So is there a solution for me such as a new graphic card or a replacement screen that would make it easier for "seniors" like myself to use the computer?
    15 inch PB   Mac OS X (10.4.9)   1.5 GB

    too me it is perfect, any higher would be really really pushing it.
    the resolution is great for production type work, animation, photography, film, design, illustration, etc. but maybe not the best for business type work.
    I am 20 and have become very adapted to reading tiny text, just in general i think, not just on computer screens but with everything.
    1680x1050 on a 17" when Apple uses 1680x1050 on their 20" monitors, but that is just how it works, Apple is not manufacturing these displays so they have to stick to the standard sizes available.
    Are you mostly at a desk with your laptop? or more taking it with you on your lap?
    I am kind of suprized however, that their isn't a way to increase text size of the Mac UI, maybe their is??
    if "Resolution Independence" turns out to work like it should, that will be a nice feature, and it should indeed solve your problem, if the whole UI is scalable like the icons, etc. are now.

  • Screen Resolution to high..

    Hi,
    after installing iOS4 my screen resolution is too high. How to reset to see all of the screen again ?

    Same problem here. I have an iPhone 3GS, but iOS4 seems to recognise the screen as having a 4G resolution. Thus I can only see 1/4 of the screen and it won't scroll.
    Tried a reset, but it isn't fixing it.

  • Resolution too high for monitor

    hi again, i had some problems installing arch linux, so i quit and tried ubuntu, but it seems that he doesnt like me and my ati card, so i couldnt get the cube and all efects working.
    so here i am again, my problem was:
    i install arch
    make all updates
    install gnome and gnome extras etc
    then, i run "x -configure"
    create an account
    and i activate gdm (through the "rc.config" i thing)
    now i get to the problem, when i try to start arch when it comes to the graphical enviroment, the screen goes blan and tell that can't support resolution, that its too high. should that be automatic? how can i solve the problem? driver problem, should i use my tft cdrom? help me please:(

    DarkForte wrote:Try editing your xorg.conf by hand and removing the unsupported resolutions.
    This can be done with a line that looks something like this:
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    Make sure the highest resolution is the one your monitor supports.
    Edit: that line goes below the "Depth" entries in the "Screen" section (usually near the bottom) of xorg.conf.
    Last edited by peets (2008-01-04 02:16:55)

  • Screen resolution too large on HP Pavilion dv6608ca after Windows 7 Update

    Hi, I've recently updated my HP Pavilion dv6608ca from Vista to Windows 7 64 bit, and all of a sudden the screen resolution is just too big even after I adjust it in the display. I've searched high and low here and elsewhere but can't seem to find the correct driver.
    Can someone please help?
    Thanks in advance.
    Chris
    This question was solved.
    View Solution.

    Newuser1227, welcome to the forum.
    Have you used Windows Update and HP Update to see if this installs the appropriate driver?
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Acrobat Pro 6.0 - Text Box Properties: How-to change font / default

    Inserting text box into an existing .pdf opened in Acrobat Pro ver. 6.0
    Need to change font size to smallest. Right-clicking on field to open 'properties', clicking on 'Appearance' tab, BUT there is no choice for 'font'.
    HOW DO I...change the font size in a text box?
    HOW DO I...set the default to that font/size/color/border/fill?

    You need to have the Properties Bar open (Ctrl + E), double-click on the text so you can select some of it, and you should see where you can specify the various font properties.
    George

  • I somehow got pumpkins at the top of the screen on Firefox - can't figure out how to change them to something else. Help!

    Across the top very top of the screen I somehow loaded a seasonal picture of pumpkins. I can not find where I got them from and can't figure out how to change it to another picture.

    Sounds that you installed a Persona.<br />
    You can uninstall your current Persona and revert to the Default theme (Tools > Add-ons > Themes).
    See
    * [[Personas]]
    * [[Using themes with Firefox]]

  • Is it possible to make a photo's resolution too high

    I am struggling with printing my christmas photos. I scanned my 8 X 10 photos at 1200 dpi which gave me a 9620 X 11936 file which is 38.3 MB. If I am patient enough...meaning hours of waiting...my PC will print the photos to my HP 1200 dpi printer using the Kodak EasyShare Software. These prints turn out great but it is too painful. iPhoto won't even print to the HP, preview, or save a pdf of them. I just want excellent quality prints and the 600 dpi looks bad. I'm also interested in trying out a book order. Can anyone help me figure out how to print these files? Is it possible to send files this large in for a large hardcover book order? If I need to drop my resolution how can I do it without rescanning? And last, What resolution will give me photo store quality prints from both my printer and if I order prints from the iPhoto program?
    G5   Mac OS X (10.4.3)   imac and tower

    then save as TIF or JPEG.
    Another really good alternative to TIFF or JPEG is PNG. PNG is a lossless file format that has about half the file size of a TIFF. I've been using it for scanning my slides.
    The resolution you should scan at depends on:
    1. The actual quality of your scanner. Is it really a full 1200 dpi scanner or is it interpolating to give that resolution. There are some other tricks that scanning software like Silverfast can do to decrease the noise and increase the dynamic range, that have more impact on image quality than sheer number of pixels.
    2. The quality and nature of what you're scanning. For an 8x10 photo, 1200 dpi will just show up the grain in the photo paper. Same thing for scanning a 35mm slide at over 1600 dpi -- depending on the film stock, you may hit the resolution of the film before you max out the resolution of the scanner.
    3. What you're going to do with the image. Obviously printing a very large print, or cropping down to a small portion of the frame requires more pixels (assuming they have real data in them). Prints from Kodak, etc., on photo paper actually require fewer pixels (150 dpi for the final print size) than printing from your inkjet or a photo book (which uses a halftone screen that does best with about 2x as many pixels as lines in the screen, or about 300 dpi).
    Bottom line, the final number of pixels across for your scanned image is more significant than the so-called resolution you scan at. A good quality 1200x1600 pixel image is more than adequate for many purposes.

  • TEXT IS TINY--HOW TO ENLARGE?E-MAIL ACCESS PAGE.

    WHILE FORWARDING AN E-MAIL TO A # OF PEOPLE IN ADDRESS BOOK I KEPT HOLDING THE CONTROL KEY DOWN. SUDDENLY ALL THE TEXT BECAME SMALL. HOW DO I RESTORE IT TO NORMAL? THE ENTIRE PAGE SHRUNK BUT I RESTORED IT TO FULL SCREEN, BUT TEXT IS STILL VERY SMALL. THANKS.

    Use "View > Zoom > Reset" with that shrunken page on display.
    There are also other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Java Plug-in 1.4.2_03 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • Screen Resolution Too Small With Bumblebee

    I have a Thinkpad w540 which has optimus.  I installed bumblebee and it certainly works.  That is to say that it switches between the two graphics cards (I don't have power management down yet.).  However, when I open a fullscreen game with bumblebee (specifically Bastion) the game opens in a very small windown in the top left corner of the screen.  The rest of the screen is black.  When I use bumblebee to open up the Nvidia control panel it seems that the resolution won't go greater than 640x480.  My screen is 1920x1080. 
    Has anyone else experienced this and does anyone have a work around?  I would love to be able to use both of the video cards that are on this laptop.

    I'm a Gentoo user with precisely this problem (running Bastion through Bumblebee/Optimus on my W520, with a small window for Bastion but no similar problem for Amnesia: TDD). I don't suppose you know what AUR is doing to create the intelbastion script? I'd like to try replicating it in my ebuild.
    EDIT: Hmm, looking elsewhere in this forum, it appears that "force_s3tc_enable=true bastion" makes the game work on my Intel card (rather than the nVidia one). Plus there are some useful Bash scripts here. Anyway, it would be nice to know if this is similar to what the intelbastion script is doing, nonetheless.
    Last edited by trimeta (2012-06-13 05:01:05)

  • Picture reject resolution too high.

    The new HP 5520 I bought will not print pics via ePrint when the resolution is less than 100 dpi.  I am taking it back if I can't change it. 72dpi is fine for many uses. HP just wants to force me to use more ink. Any way to change it?

    Hi,
    Viewing on normal computer screen, 72DPI is goo enough but printing photos at 72DPI you actually waste your inks. To get a better prints, you need al least 150DPI.
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for