Screen Resolution - want to go to 1280 x 1024 from 1024 x 768 !!

Is there any way of increasing the screen resolution to 1280 x 1024 from 1024 x 768 ??

Unsupported screen resolutions generally are not possible on internal
displays; some screen spanning software (unsupported by Apple?)
and ResX third-party patches may allow you to use those higher res-
olutions on an external display. But since they are not supported
officially by Apple, any hack to your system software/hardware which
could result in hardware damages to the computer will not be covered
under any Apple warranties on your computer.
So, were you trying to change the internal display's resolution beyond
specs or try running a different res external display?!
Best of luck in your experimentation.

Similar Messages

Satellite Pro U400 - How do I get the native screen resolution for external monitor?

I have a samsung syncmaster external screen connected to a Satellite Pro U400.
The screen resolution only goes up to 1280 etc however the samsung minimum is 1440 x 920 (ish I forget).
How do I get the samsung to display the whole enlarged screen to save my eyes from the realativively small internal screen?

Hi
> The screen resolution only goes up to 1280 etc however the Samsung minimum is 1440 x 920 (ish I forget). How do I get the Samsung to display the whole enlarged screen to save my eyes from the realativively small internal
I??ve got a U400 which was equipped with the Intel graphic card and I??ve got an external LCD which I have connected to the U400 using the DVI-to-HDMI cable.
My U400 unit supports the HDMI and the LCD the DVI port.
I have received also the driver disk with my LCD and I have installed the software.
I have also update the Intel driver and used one from the Intel page.
Now I have the access to many different external resolutions and can choose it.

X201 screen resolution issues

My x201 has a maximum screen resolution in the settings of 1280 x 800 but states that anything under 1280 x 960 may mean that some information is not displayed on the screen. I have this problem with a program that I am running. Any suggestions please.....

you can change it.
even on a netbook you can change the resolution.
make sure you have the right drivers fot the GPU.
go to the site and grab it.
i run customs all the time but you will need full software support of the graphic chip so that means not just the display driver but it software as well.
go to intels site for that.
most pc makers dont include the software just the display driver.
same one as windows has built in.
once you have fiull surport you can change it easy even give it a boost,adjust certin things.
intel is not as complex as say AMD or nvid but it getting better.
there be a limit to what the latop own display can do dpi wise size wise so on and what you read well on it depends on options too alot have a finer pith disply.
again install the software package for that chipset.

Adobe Reader 9.3.4 causes poor screen resolution and unreadable pdf documents. Why?

When I open Reader (9.3.4) the screen resolution becomes very poor - like a color monitor from the early 80's - and text in pdf documents is highlighted black or some other random color, making it unreadable. This has been the case since I upgraded from Reader 8 recently. Any ideas on how to fix this?

To those that tried to assist me with trying to get Reader to display
correctly. Thanks for your assistance.
I resolved the problem by doing a backup of all my files, then formatting the hard drive and reinstalling all programs, from XP to Trend Micro, to Office 2003 and finally Reader 9.
The problem has gone and the speed and stability of my PC has been greatly improved.

Message says "screen resolution problem" and says to set higher than 1020 x 600. My screen resolution is set higher. Why am I getting this message all the time I use firefox?

when I go on to Firefox I keep getting the message that there is a screen resolution problem and it says I should set it higher a than 1020 X 600. But my screen resolution is set higher. It is set at 1360 x 768. Why am I getting this message continuously?

I've had the problem too... for at least a month or more. It would happen when logging into yahoo mail. But it happens only with firefox... not explorer. I contacted yahoo and he had me first disable add ons... no change... and since it didn't happen with explorer, they said to contact firefox. So I followed the advice of cor-el's post (on this page) and made the text on my page smaller... It did fix the issue.... but, I liked the size of the text the way I had it. So, how do I get it back to that size, and not have that annoying message any longer? thanks!!

Screen resolution is limited to 1280 x 720

Hello.
I just got my new iMac 27 3.2 Mhz
The screen resolution is limited to 1280 x 720.
I reinitialized the PR Ram without success.
No other option is displayed in the preferences. someone has already this problem ?

Before taking the Mac to an Apple Store, you could call AppleCare who may be able to offer a solution, or organise an exchange of machine, that would hopefully save you the trouble of carting it around.

I want to scale the font size programmatically according to the screen resolution

I have done scaling the front panel and front panel objects by programmatically. but the text (font) size is still remain same. It’s shows very bad. So I want to scale the font size programmatically according to the screen resolution. Can u suggest some idea to implement?
Vijayakumar.M
Bangalore.
India

This is a duplicate post. See the original post for an answer:
http://forums.ni.com/t5/LabVIEW/i-want-to-scale-the-font-size-programmatically-according-to-the/m-p/...
Eric S.
Applications Engineer
National Instruments
E. Sulzer
Applications Engineer
National Instruments

How can set screen resolution on firefox , i know zoom in and out but i want set my broswer to my favorie levelof zoom

hi
how can set my firefox screen resolution ( i know zom in and zom out but when i restart my firefox , it chanaged to perviose level of zoom )

In case you are using "Clear history when Firefox closes":
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords and website specific setting like the page zoom.
Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception.

Connecting Samsung 913n monitor to ibook -screen resolution?

Hi,
I've bought a new monitor - Samsung 913n - and want to connect it to my ibook. No joy so far!
I have the adaptor and there seems to be a link between them, as the monitor says I've lost the signal when I unplug the adaptor.
One possibility seems to be that there is not an option for the correct screen resolution when I go to the Display preferences. The monitor is 1280 x 1024, but I only have three options which are all smaller than this.
I have reinstalled my system software but no luck.
Any help appreciated!

Hi, Nikki. Welcome to Apple Discussions.
You are stuck with the screen resolution of the iBook. There is no way to increase it. Sorry.

Nouveu_XFCE4_Strange problems with screen resolution

Hallo to all the people out here!!!
I'm quite new to linux. I've been using Ubuntu and Mint for sometime but I decided to switch to Arch, since I decided to have more control over my machines. Before I go on I must clear out that most of those machines are build from old spare items.
in the current machine I'm using nouveau driver with a xfce4 desktop, but I'm unable to set the resolution 1280x1024 to work properly, which I'm almost sure that my screen is capable of.
I managed to set the resolution to 1280x1024 after I manually added new xrandr mode, but there were various strange problems:
1. Windows or panels that were at the bottom of the screen tend to disappear?!
2. In the log in screen (I'm using SLIM)can not see what I type
More than this:
The screen changes resolution during boot
There's a strange sound like flick of a switch every time the resolution changes
I've searched for similar problems but found nothing close to mine, and get more and more confused and i think i'm gonna mess everything up...
Thanx in advance for the help!
These outputs I think that will be useful :
uname -a
Linux archbox 3.3.2-1-ARCH #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012 i686 Intel(R) Celeron(R) CPU 2.80GHz GenuineIntel GNU/Linux
lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA controller])
lsmod
Module Size Used by
fuse 59348 2
firewire_ohci 27283 0
firewire_core 44257 1 firewire_ohci
8139too 17280 0
8139cp 16043 0
snd_intel8x0 22672 0
ppdev 4750 0
crc_itu_t 1095 1 firewire_core
mii 3439 2 8139cp,8139too
snd_ac97_codec 89900 1 snd_intel8x0
parport_pc 26601 0
iTCO_wdt 10773 0
ac97_bus 874 1 snd_ac97_codec
shpchp 22557 0
iTCO_vendor_support 1545 1 iTCO_wdt
snd_pcm 60499 2 snd_ac97_codec,snd_intel8x0
snd_page_alloc 5901 2 snd_pcm,snd_intel8x0
snd_timer 15158 1 snd_pcm
snd 45013 4 snd_timer,snd_pcm,snd_ac97_codec,snd_intel8x0
floppy 49063 0
thermal 6563 0
fan 1902 0
soundcore 4986 1 snd
pcspkr 1423 0
i2c_i801 6992 0
parport 26479 2 parport_pc,ppdev
intel_agp 8688 1
processor 23476 0
pci_hotplug 21878 1 shpchp
intel_gtt 11193 1 intel_agp
evdev 7310 5
ext4 385004 3
crc16 1091 1 ext4
jbd2 60590 1 ext4
mbcache 4345 1 ext4
usbhid 31477 0
hid 66633 1 usbhid
sr_mod 13148 0
cdrom 30504 1 sr_mod
sd_mod 25867 5
pata_acpi 2388 0
ata_generic 2391 0
ata_piix 18616 4
libata 145775 3 ata_piix,ata_generic,pata_acpi
scsi_mod 112765 3 libata,sd_mod,sr_mod
uhci_hcd 19712 0
ehci_hcd 38480 0
usbcore 122719 4 ehci_hcd,uhci_hcd,usbhid
usb_common 622 1 usbcore
nouveau 700360 2
button 3614 1 nouveau
video 9819 1 nouveau
mxm_wmi 1101 1 nouveau
wmi 7259 2 mxm_wmi,nouveau
drm_kms_helper 23303 1 nouveau
ttm 46603 1 nouveau
drm 166804 4 ttm,drm_kms_helper,nouveau
agpgart 22159 4 drm,ttm,intel_gtt,intel_agp
i2c_core 16845 4 drm,drm_kms_helper,nouveau,i2c_i801
my screen configuration placed in /etc/X11/xorg.conf.d/20-mntrstp.conf
Section "Monitor"
Identifier "Monitor0"
# Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync
# Option "PreferredMode" "1280x1024_60.00"
EndSection
Section "Device"
Identifier "Nvidia card"
Driver "nouveau"
EndSection
Section "Screen"
Identifier "Screen0" #Collapse Monitor and Device section to Screen section
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24 #Choose the depth (16||24)
SubSection "Display"
Depth 24
Modes "1280x1024_60.00" "1024x768" "640x480" #Choose the resolution
EndSubSection
EndSection
xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0*
800x600 60.3 56.2
848x480 60.0
640x480 59.9
DVI-I-1 disconnected (normal left inverted right x axis y axis)
TV-1 disconnected (normal left inverted right x axis y axis)

OK I just renamed my configuration file from 20-mntrstp.conf to 20-nouveau.conf
(I thought that the number 20 was the important part not the name itself)but nothing's changed.
I can't find any /boot/grub/grub.cfg file in my system!!!Do I have to create one manually?
And my menu.lst looks like this:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/4950a9db-cefe-4b24-a523-fbb375d5b6e3 ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/4950a9db-cefe-4b24-a523-fbb375d5b6e3 ro
initrd /initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
Yes I've followed the wiki, but I'm not sure if i messed up anything as i was trying to solve the problem. Also I'm not a very experienced Linux user so a lot of things are made without necessarily understanding the whole of them.

URGENT: How to fix an application with the screen resolution?

HI everyone,
I am desprate and need help.. I have developed an application with Java swing and awt (JFrames, JPanels and...). This application displays perfectly with 1280 x 1024 screen resolution but in a situation where the screen does not support this resolution, a part of my application will not appear. I can not even scroll down to see the reste of the components. Does any one has any idea that how I can resolve this problem! I mean how either I can make my JFrame or panel to scroll down or to change the size of the components according to the resolution!
Thank you very much and wait for a reply :)

One of the possible reason of the problem is you must have hardcoded the size of panels and other container that is just right for the screen resolution 1280 x 1024.
The solution is set the size of the containers that depends on the resolution of the screen.
You have not explained much detail about the scrolling problem. But I suppose that you have a scrollpane in you GUI and you want to scroll the component inside it even at another resolution.
try using this
if p is the panel that is added in the scrollpane then set its prefered size.
p.setPreferredSize(resolution dependant size).

Screen resolution exteral monitor for philips 22PFL4505D/F7 monitor

what do i need for the screen resolution exteral monitor - philips 22PFL4505D/F7 monitor
on a macbook
thank you!
it works - it is just not clear

The 13.3" screen on the MacBook running at 1280 x 800 will have a ppi (pixels per inch) of around 113. A 22" monitor running 1680 x 1050 will have a ppi of around 90. So it is natural that it will look magnified compared with the MacBook. The two displays have different a pixel pitch.
Since there are no monitors with ~113 ppi out there in the market, what you want to do with having the same size and sharpness between the MB and a monitor will not be possible.
If you ran the MB's screen at 1024 x 640 (not even sure if that is an available choice), then the two screens would match in terms of "magnification." But the MB isn't going to look very sharp running such a low, non-native format.

Screen resolution problem - HP computer and LED Cinema Display

I just purchased an HP Envy Phoenix H9-1330 with Windows 8, and I connected it to my 27" Mac LED Cinema Display, but the resolution is horrible. The highest option in the screen resolution menu is 1280 x 720, and I'm getting the error message "Your resolution is lower than 1024 x 768. Some items might not fit and apps might not open". How do I fix this? What kind of issue is this (Windows 8? Graphics card? HP can't support my monitor? etc...)?
I just bought another brand new computer, but not an HP, with Windows 8 and I have no problems with the resolution - it looks absolutely beautiful. I want to use my monitor with my HP desktop though.
Thanks for any help

Still haven't figured it out....
BUT I did notice that, on the back of the computer, there are 2 additional DVI connections that are covered with a black cover and screwed in (and they say 'please do not remove'.... I'm asuming it's because they aren't connected to anything? Or maybe they aren't connected to the graphics card?). Is it possible that just my DVI connection is wrong, and I'll need to connect to one of these covered-up DVI inputs instead? But why are they covered up? Do I need to take it in so they can be connected to the graphics card?? Help! I don't want to return this computer, but I will have to if I can't get the resolution fixed.

Increase the screen resolution

Hi All
Is it possible to increase the screen resolution in BDC?
My Max screen resolution is 1280 X 800 and my BDC screen operates at this resolution
I want to increase it to 1400 X 1080
Is there a way i can pass these values?
Thanks in advance

Hi:
The 15.6" screen size model only has a display resolution of 1366x768 according to the product specs at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04031365&tmp_task=prodinfoCategory&cc=us&dlc=en...
There are no product specs listed for the 17" screen model but since they end in the same 111tx, I assume that the 17" display has the same resolution as well.
Nothing you can do to change that. It is a limitation of the display panel hardware.

What screen resolution are all of you designing for?

I realize a liquid layout is ideal, but even liquid layouts have an "ideal" resolution the design is built around.
What minimum width are you guys designing for? (ie, 960px for 1024px resolutions)

BobLevine wrote:
Depending on the design I use anywhere from 950 to 1000 pixel widths.
Bob
Thanks for your answer. Mind if I pick your brain regarding these choices?
By my calculations (using latest Windows + latest IE, which represent the majority) the window border occupies 8px on each side.I just measured it a few seconds ago.
The scrollbar occupies an additional 17 pixels on the right side.
Total : 33px of the horizontal viewable area is taken up by the browser.
This would mean that when catering to 1024 screens - which you clearly are - the sweet spot would be 1024 - 33 = 991 pixels max with a borderless design (ie, margin:0 on the body).
Knowing this, why would you ever use 1000px wide? If you were catering to 1280, then you'd want 1280 - 33 = 1247 pixels max. Or are you referring to centered designs that don't scroll?
Is there a conscious and calculated reason why you'd limit yourself to 950px when you've got 40 more to work with, or why you'd unnecessarily force a horizontal scrollbar on all 1024 screen resolutions by designing @ 1000px?

Screen Resolution - want to go to 1280 x 1024 from 1024 x 768 !!

Similar Messages

Maybe you are looking for