Screen resolution with 2 monitors
I have an MIS G4MX460-VTP video card instaled on Windows 2000 and two monitors connected to the card. I would like to know how to ajust the screen resolution on each monitor seperately. Presently, when I am openning the display properties of Windows I am seeing only one monitor even if the two monitors are connected. Thanks for your help.
syllab
I have a g-force 4200 128 meg card.
Windows 2000. I have a 21" and a 17" monitor and it spreads the entire desktop across 2 monitors but the resolution stays the same on both. Obviously a 17 to a 21, either the 17 wont carry the resolution i want for the 21 and shut down or everything is very large on the 21.
I also cant get it to behave correctly with monitor placement. My 17 is on the left and 21 on the right , but no matter what i do, software settings or physically switching the vga ports it treats the 17 as if it was on the right. these issues are regardless which is set as the primary or secondary, and my 17 is never listed by name anywhere as the 21 is . it seems to be considering that i have to have the same size and type monitor. :O
Similar Messages
-
[Non IE Regression] Support for full screen mode with multiple monitors
This seems to be a regression with Flash Player v11.2.202.x (for all other browsers).
With Internet Explorer it is still working.
http://kb2.adobe.com/cps/890/cpsid_89050.html
== Support for full screen mode with multiple monitors ==
Full screen content will remain in full-screen on secondary monitors, allowing users to watch full-screen content while working on another display.
Tested on Windows 7 x64 SP1 with:
- Internet Explorer 9
- Firefox Release, Beta, Aurora, Nightly
- Opera 12 build 1116
In bugbase.adobe.com I cannot choose v11.2.xPlease vote for it If you have the same problem:
https://bugbase.adobe.com/index.cfm?event=bug&id=3016912
Thanks -
Changing screen resolution with a button
Hi,
I would like to ask if there is a way for an interface to change the screen resolution of the computer? I am wanting to build an interface that loads an interactive camera that works with processing however I am needing it to be at the resolution 800*900 as the webcam screen is too small on a full 1680x1050 resolution.
Is there a way for the flash application to change the screen resolution with a button click? Are there any alternatives to this?
Thank you
JessIt is to display a portfolio at my design school for assessment, they will accomodate any necessary things that i may need for assessment viewing so it is very important to me.
Do you know what programs will work with this? What program would i have to install?
I only need to do this for my assessment so it is almost a desperate search for something that would work. -
Screen resolution of 2nd monitor
Dear all,
i am working on an application which uses 2 monitors.
i have a VI which measures the screen resolution of the screen.
i want to know the screen resolution of the 2nd monitor.
how can i get that ?
thanks,
ritesh
Solved!
Go to Solution.You could use an app property node, set to display -> AllMonitors. Index this with an array and unbundle the result. This will give info on the bounds of the screen. By subtracting left from right and top from bottom,. you can get the size of the screen.
- Cheers, Ed -
Screen Resolution for ALL monitors
IN FLASH MX, I set my screen resolution to 760px (width) x
560px (height). My monitor screen resolution is 1152x864. It looks
fine at that monitor screen resolution. HOWEVER, the website looks
h-u-g-e on monitor screen resolution 1024x768. It looks elongated
on monitor screen resolution 1280x768.
So I am wondering what is the best screen resolution to set
when in Flash? that will look good on all monitor screen
resolutions?
[email protected]I have four files that show my settings plus another file
that shows the code that comes automatically. Not sure how to
attach the files with this reply.
My monitor setting is 1152x864. My movie setting is 760x560.
I am not sure what you mean by embedding in HTML. I thought
that came automatically.
My movie might be 760x560 but on a monitor screen 1024x768,
my site is huge because the screen is smaller. And on a monitor
screen 1280x768, my site becomes elongated.
I am working solely in Flash, no Dreamweaver. I thought the
target to HTML is automatic.
I need to solve the situation of being huge on 1024x768 and
the situation of becoming elongated on 1280x768.
[email protected] -
Kde screen resolution with nvidia driver
Hi,
I am completely new to ArchLinux. I really enjoyed installing it and its a hoot to play around with!
I am having a problem getting the screen resolution to work well with the monitor and the resolution with KDE 4.3. I found that by changing the resolution to 1024x768 and changing the refresh rate to 53 or 54hz, the fonts that otherwise display horribly with the nvidia driver and installed nvidia card will suddenly become beautiful. I went to Kmenu, Settings, then display settings, and changed the configuration, and everything worked great.
But on next boot up after I have shut down the computer, X doesn't remember these settings and the fonts look terrible again. If I open the kmenu again and look at the display settings, they are still set at 1024x768 and 54 hz. Once I have looked at them, the screen on the monitor goes dark for a second. Then the computer knows that I want those settings without me changing anything, and adjusts to them without having to hit the apply button. Then the fonts look great again.
How can I get the display to start with those settings? I have tried several configurations of the /etc/X11/xorg.conf file without success, so I need some help.
Thanks
Last edited by munguanaweza (2009-11-13 17:06:17)I know some time back using nvidia driver with my particular monitor, i had to tell it what resolution/refresh rate to use by default or else X would make a poor choice as to what it wanted the default to be (put me in 800x600 or something like that by default). I was able to tell X to default to what I wanted by adding in a Metamode line in my xorg.conf, i think under the screen section. I'm out right now and won't be back to my box to look up exactly what I did, but hopefully this might give a starting point if you havent tried it already. Metamodes in xorg.conf under the Display section if i remember right. I specified a resolution there and it now uses that as the default.
-
Satellite A660-1FM - Max. screen resolution of external monitor
Hi All,
This may be (probably) an easy questions to answer but I have a Satellite A660-1FM and want to use it with my Samsung Syncmaster (forgotten model) external screen. I grabbed an HDMI->DVI-D adapter, and all is well, but here is my question:
The toshiba specs page for my laptop (http://uk.computers.toshiba-europe.com/innovation/product/Satellite-A660-1FM/1096013/toshibaShop/false/) shows an external resolution capability of:
Max Resolution : 2,048 x 1,536
Max Refresh Rate : 100 Hz
Non-interlaced resolution with max refresh rate : 1,920 x 1,200
But I get what I call standard HDMI resolution (not surprising I guess) when connected HDMI->DVI-D to my external monitor. I have previously run this monitor on my desktop at much high resolutions than 1080P, so the monitor is capable.
Just wondered what I'm missing here, or is it a case of the graphics card spec is higher than is possible to output from the laptop ?
Thanks for any help
AndyHi,
Thanks for the reply.
As to native resolution of the external monitor - unsure how to find this - but it was running a with a lot higher res when it was connected to my old desktop (which has died and been replaced by this laptop)
R/E the adapter - My Samsung Syncmaster monitor has a DVI-D cable sticking out the back of it, so I needed to connect that to my laptop - either vga-> DVI-D or HDMI-DVI-D to make use of it.
The external monitor is currently running at 1680 x 1050 using the laptop HDMI output -> HDMI-DVI-D adapater -> external monitor.
Before my desktop died, using the same external monitor I was running at 1680 x (guessing a bit here) 2048 ish (really sure I had a greater y res, this 1050 lark is really squishy).. in any case, the Y resolution was much much much better than 1050.
But, according to the specification for this laptop, it can output 2048 x 1536 to an external device (How, the HDMI and VGA outptu cannot go that high right ?)
So, I'm trying to figure out how to get the resolution on the laptop spec onto my external monitior, which has more than handled this resolution before my old gaming desktop died.
Thanks again for the reply - I hope this makes my question clearer.
Cheers
Andy -
Screen Resolution with hwd [solved]
I am having trouble getting the right screen resolution for xorg with hwd...
I used...
pacman -Sy xorg hwd
hwd -xa
My monitor and video card are optimally at 1280x1024 but when I use hwd, the maximum screen resolution seems to be set at 1024x768. Any ideas on how to get 1280x1024 without xorgconf?In the Display SUBSECTION(s) for the Screen SECTION in xorg.conf you must put something like this :
Modes "1280x1024" "1024x768" "800x600" "640x480"
The first mode listed is the mode that is used by default. -
[SOLVED] Changing screen resolution with xrandr.
Been googling around after a way to change my screen resolution.
I'm on a Acer Aspire Timeline 3810t with the resolution 1366x768.
I wanted to change my resolution to something like 1900x1200 and found a guide explaining how to do this with xrandr.
This is what I did:
jorgen ~ $ xrandr
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 165mm
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
TV1 disconnected (normal left inverted right x axis y axis)
jorgen ~ $ cvt 1900 1200
# 1904x1200 59.93 Hz (CVT) hsync: 74.61 kHz; pclk: 191.00 MHz
Modeline "1904x1200_60.00" 191.00 1904 2032 2232 2560 1200 1203 1213 1245 -hsync +vsync
jorgen ~ $ xrandr --newmode "1904x1200_60.00" 191.00 1904 2032 2232 2560 1200 1203 1213 1245 -hsync +vsync
jorgen ~ $ xrandr --addmode LVDS1 1904x1200_60.00
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 33
Current serial number in output stream: 34
Does anybody have an idea about what I am doing wrong, or why I get this error?
Last edited by jorg1 (2011-03-12 04:20:39)jorg1 wrote:
Ok, I found some good documentation - the wiki. (Been in ubuntu so long that I forgot to check the official documentation before going to the forums :S)
Made myself a 10-monitor.conf file:
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Device0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1900x1200_60.00" #Choose the resolution
EndSubSection
EndSection
But it still won't switch to any other resolution than 1366x768. Anybody see anything wrong with this?
Good, you've learnt to use the wiki, please do that first from now on (google as well). Also, please use code-tags, makes it easier to read code/conf-files.
It looks like you're trying to set your laptop screen to a resolution higher than it can go. Hint: not possible. If you had an external screen with a higher res then you could use that, but the resolution is limited both by the screen and the graphics card, and I haven't heard of any laptop screen with such a high resolution. -
Satellite Pro U400 - How do I get the native screen resolution for external monitor?
I have a samsung syncmaster external screen connected to a Satellite Pro U400.
The screen resolution only goes up to 1280 etc however the samsung minimum is 1440 x 920 (ish I forget).
How do I get the samsung to display the whole enlarged screen to save my eyes from the realativively small internal screen?Hi
> The screen resolution only goes up to 1280 etc however the Samsung minimum is 1440 x 920 (ish I forget). How do I get the Samsung to display the whole enlarged screen to save my eyes from the realativively small internal
I??ve got a U400 which was equipped with the Intel graphic card and I??ve got an external LCD which I have connected to the U400 using the DVI-to-HDMI cable.
My U400 unit supports the HDMI and the LCD the DVI port.
I have received also the driver disk with my LCD and I have installed the software.
I have also update the Intel driver and used one from the Intel page.
Now I have the access to many different external resolutions and can choose it. -
Full Screen Problem With Dual Monitor Viewing
I have a 64 Bit system, Chrome browser and with flash player built in. I am attempting to view videos on a 2nd monitor while working on the primary monitor. I have tried this on various sites, TNT.tv, USANetworks.com, etc... I select full screen viewing. A message is displayed to exit full screen press escape. However, when I attempt to do anything else automatically exit full screen on the second monitor. This should not be an issue and with the way most people view video online, they are doing so on a 2nd monitor or TV. I have done a google search and it is a common problem, but there is no solution that seems to work.
I have just posted the same question - missed yours.
Adobe could you take a look into this - I think solving this problem can't be that hard.
jef -
Full screen preview with one monitor
Hello,
I'm using Premiere Pro CS5 on a Mac with a single monitor. I would like to see the full screen preview on this monitor, hiding all GUI elements.
By reading around, I could only find the suggestion of selecting the Preview pane and press the ~ or ` key. Unfortunatly, it seems that this shortcut only triggers the Maximize or Return to the Original Size commands. GUI elements remain in the display.
Is there some preference to select somewhere?
Thank you, PaoloThat's as close as you can get with Premiere; it doesn't do a single-monitor fullscreen the way FCP does.
Make a feature request if this is something you'd like to see: Adobe Feature Request/Bug Report Form -
Screen resolution with Mode in BDC
Hi All,
In call transaction statement I am using mode as well as options from statement but 1 error is coming that i can't use mode and update with options from statement. But I want to run in background as mode 'N' as well as I want the default screen resolution.
Please tell me some way to solve this issue.
Regards,
SivaramHi ,
You need not use mode. You can set the values in OPTIONS itself.
Eg :
Declare a structure of type ctu_params.
Data :gs_params type ctu_params.
gs_params-dismode = 'N'.
gs_params-defsize = 'X'.
Call transaction 'MM01' using gt_bdccat
messages into gt_bdcmsg
options from gs_parms.
Try this .
Best Regards,
Hari -
Help!..Urgentfixed Screen Resolution with Graphics Configuration
Hello, i am try to make our swing application resolution fixed.
whatever is system resolution does't matter.
my application always running on 1024 *768 mode.
But i face some problem when i run the project with is feature and open any dialog by clicking on button and move that dialog box that dialog box is not visible(transparent) to me.
I am try most of thing but my problem was not solve.
Please give me any suggestion as soon as possible
It's very very urgent....
my code is : -
GraphicsDevice graphicsDevice = GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice();
GraphicsConfiguration graphConfig = graphicsDevice.getDefaultConfiguration();
DisplayMode displayMode = new DisplayMode(1024, 768, 32,DisplayMode.REFRESH_RATE_UNKNOWN);
mainframe = new JFrame("",graphConfig);
graphicsDevice.setFullScreenWindow(mainframe);
if(graphicsDevice.isDisplayChangeSupported()){
graphicsDevice.setDisplayMode(displayMode);
}I am using Images in my swing project if i used make
my project screen resolution free than my image
module in great trouble so that's the reason i could
not made my swing application resolution free (run on
any resolution).
Bullshit. I have used Photoshop (various versions) and Illustrator (various versions) for 5 years now and not once have they forced resolution changes on me.
This is a dumb idea and unneeded. Please give it up.
Now here is what you should do. Post a question in the Swing forum about how you are having problems with LayoutManagers when you use images and blah blah. Be prepared to post a concise, compilable and executable program that demonstrates your problem.
Best of luck. -
Leopard Screen share with 2 monitors
Screen share with Leopard is one of its best and most useful features for me so far. I'm doing it a couple times a day.
I have dual 20" screens. In Screen share, both show up on the other person's mac. If they have a laptop, that makes for very tiny viewing, because both have to fit on theiir screen.
If I turn on the mirror feature in the Monitors Sys Pref, then only one of the screens shows up. But on my end all open windows cram into one monitor.
What would be much better is if there could be a way to not turn on mirroring, and just be able to show the one monitor that has the menu.
This probably isn't doable right now. I'm just mentioning it in case someone comes up with a hack or method.Wish List stuff can be entered here http://www.apple.com/feedback/ichat.html
It will be read.
You will not a reply.
It may not be acted upon.
8:17 PM Sunday; November 11, 2007
Maybe you are looking for
-
Can't create or mount NFS share
I am trying to create an NFS share on a server that already does quite nicely sharing AFP and SMB. A friend tells me that this is easy but I can't make it work, I'm still told that my password is incorrect. Can you watch this short movie to see what
-
Help me ! I pressed reset all setting I think does it take hours ?
-
Instead of Compressor went Quicktime conversion (still problems)
Hi, Thanx for all the suggestions regarding compressor. I didn't even consider doing Quicktime conversion for my DVDSP2. I did this last night with a two pass knowing it would take along time. After about 9 hours with some 18 to go ( the piece is 78
-
How to test sound using echo call on my Samsung Pr...
I have a Skype account and am trying to see if the audio works on my Samsung Galaxy Pro 8.4 tablet which is running Android 4.4.2. How do I make an echo test call on this device?
-
How can i get my 1st gen airport back on line?
I use my airport express with iTunes to send music to my stereo. I have done this for the past 4 or 5 years. The other day i noticed that it wasn't working and upon inspection found that the power to it had become unplugged. Plugged it back in to pow