Screen saver and screen sleep not working consistently
Recently with one of the most recent updates my screen saver and screen sleep stopped activating when they should. Sometimes I leave the room and come back an hour later only to find my screen is on and no screen saver. I have screen saver set for 5 minutes and screen sleep set for 10 minutes (regardless of battery or plugged in state). I have tried changing them and reserving to no avail. Any way to fix this?
Thanks.
When was the last time you restarted your computer or even repaired permissions?
Try trashing the ~/Library/Preferences/ com.apple.systempreferences.plist file and restarting the computer.
Similar Messages
-
Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI
Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again. -
Since I upgraded to Lion my screen does not go to sleep. I have set and reset the Energy saver settings but it just seems to have a full bright screen all day and night. Hot corners work and I can set the screen to sleep but when I come back a few inutes later the screen is bright again!
What have I done wrong?How to disable the closed-clamshell mode?
I think, this is what you're looking for ... maybe you want to uproot that question. -
Out of nowhere my keyboard locked, trackpad didn't work and start up chime stopped working. Then, I got drop down menus when I tried to click on something, and now my computer is working fine. In a while it will happen all over again. How can the keyboard work fine and then stop? Then be fine again. I am not technically inclined, so please help. I have a MacBook Air. Thanks
To add a Pinterest icon to your Home Screen do the followiing:
In Safari:
Go to the Pinterest Website - http://pinterest.com
Touch the Share icon at the top (looks like a box with an arrow coming out)
Touch Add to Home Screen -
When I close firefox 4 the option to save the open tabs is not offered. Only choice is to cancel or close tabs. Running vista home premium. Only extensions are adblocl plus and image zoom
You can use "Firefox > History > Restore Previous Session" to get back the previous session.<br />
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
You can set the warn prefs on the about:config page to true via the right-click context menu or toggle with a double left-click.
* browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br /> -
Manage Sites, Save and Put will not work Dreamweaver CS6
I dont know what is going on but none of these work - the only hint I get of something going wrong is that I get a warning that no testing server is set up when I try to save via Ctrl+S
I would re-install but I have a lot of sites set up and that will be a reall pain in the butt to reset them all up.
I have Creative Cloud subsriptionSound like your site definition may have the automatically upload to server on Save option enabled. See screenshot.
Also, if you're working with a Local Testing Server such as Wamp, Xampp or Mamp, you need to launch your server.
Nancy O. -
The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I accidentally dropped my Ipod into the lake, at the beach yesterday, but i caught it early and it wasn't too soaked... i wiped it off for the most part, and most of the buttons and the screen worked fine! i was shocked, and there were a few glitches with the camera and the slide button on the lock screen, but otherwise it was greatly intact! so i gave it a rest, put it in my purse, and picked it up fifteen minutes later, and it was working 100% normally again! when i got home a few hours later, i put it in rice for a few hours, taking it out every once and a while to check my notifications... it still seemed to be working perfectly, so i just set it down out of the rice, assuming the moisture was gone. this morning, again, everything was working normally, no glitches, UNTIL, i opened my instagram app, and the screen froze, and it seemed like it had two separate screens, and i held the Sleep button down until the screen went black... then i tried turning it back on, etc. and it still didn't work, and so i plugged it into the computer, holding down the sleep and home buttons, and itunes identified it as in recovery mode, and started updating. i tried again to press the sleep and home butttons, maybe pressing only the home button, because I heard the Siri noise, as well as the charging sound, but the screen was still black.... i checked my iTunes, and lo and behold, it had identified my iPod, and synced it to the computer, as if it were normally functioning. However, the screen is still not working, and Siri is not working either. The sounds may be the only thing that's functioning. Should i send it in?
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G, $99 for the other 4Gs, $99 for the 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price
Sometime it takes a little while for the water to damage the iPod. -
My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Cheers, Tom -
My Ipad Screen got struck and Ipad is not working .On using updated IOS 7
My Ipad Screen got struck and Ipad is not working and not allowing to shutdown also.
Only SIRI is working. and that also not able to open any app. Today Morning I updated IOS 7. It was working fine for a while. WHen I tried to Minimize one of the app using fingers by multi touch it got struct. Now neither app closed completely not screen is moving. Just got struck.
Please check regarding this issue and provide me solutionReset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Hi everyone,
I recently found out that my USB port, closest to my screen, is not working. Before I called Apple Care for help, I performed a PRAM and a SMC RESET, which unfortunately did not work. I called Apple Care and they help me troubleshoot simple resets such as, shutdowns and restarts. The representative I spoke with conluded that the physical hardware has an issue and must be brought to the Apple Store for a diagnosis. I called the Apple Store to at least budget the fee for getting a USB port fixed and it's about $300.00. I never dropped my macbook or had any sort tactile encounterment with hard surfaces by dropping or hitting. I don't understand how my macbook pro would be physically damaged. I then thought maybe my software was out of date (right now I am running 10.9 Mavericks) or I forgot to do the minor software updates, but I was at a lost again because my macbook is up-to-date. I searched for further help and found a way to monitor what's plugged into my usb ports. (I read in the apple forums that a girl had nothing in her usb ports, but upon looking at the System Information> Hardware> USB, that the macbook recognizes that there are drives in the ports) I looked at my ports; one is being used by wirless mouse (the port that works) and the other (the port that doesnt work) is being used by an "IR RECEIVER". Now, is the IR Receiver actually using that port and that's why my macbook cannot recognize other devices inserted into that port? Or is the IR RECEIVER suppose to be in that port and that the hardware for that port is simply damaged (which would mean I need $300.00 to get that fixed)? I know this is a lot, but someone help me?
(PORT THAT WORKS)
USB Hi-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c2d
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086
Bus Number: 0xfa
FaceTime HD Camera (Built-in):
Product ID: 0x8509
Vendor ID: 0x05ac (Apple Inc.)
Version: 5.16
Serial Number: DJHBAJ06VRDH7FL0
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa200000 / 3
Current Available (mA): 500
Current Required (mA): 500
Hub:
Product ID: 0x2513
Vendor ID: 0x0424 (SMSC)
Version: b.b3
Speed: Up to 480 Mb/sec
Location ID: 0xfa100000 / 2
Current Available (mA): 500
Current Required (mA): 2
Microsoft® Nano Transceiver v2.0:
Product ID: 0x0745
Vendor ID: 0x045e (Microsoft Corporation)
Version: 6.34
Speed: Up to 12 Mb/sec
Manufacturer: Microsoft
Location ID: 0xfa130000 / 6
Current Available (mA): 500
Current Required (mA): 100
Apple Internal Keyboard / Trackpad:
Product ID: 0x0252
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.18
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa120000 / 5
Current Available (mA): 500
Current Required (mA): 40
BRCM2070 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa110000 / 4
Current Available (mA): 500
Current Required (mA): 94
Bluetooth USB Host Controller:
Product ID: 0x821a
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.42
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa113000 / 8
Current Available (mA): 500
Current Required (mA): 0
(PORT THAT DOESN'T WORK)
USB Hi-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c26
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Hub:
Product ID: 0x2513
Vendor ID: 0x0424 (SMSC)
Version: b.b3
Speed: Up to 480 Mb/sec
Location ID: 0xfd100000 / 2
Current Available (mA): 500
Current Required (mA): 2
IR Receiver:
Product ID: 0x8242
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.16
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple Computer, Inc.
Location ID: 0xfd110000 / 3
Current Available (mA): 500
Current Required (mA): 100I can help with the "IR Receiver" part of your question. That's the piece of hardware inside older MacBook Pros (MBPs) that lets them work with the Apple Remote. "IR" is the standard abbreviation for "infrared," the portion of the electromagnetic spectrum used by remotes for many common devices (stereos, cable boxes, Apple TVs, etc.). The remote sends a coded stream of IR pulses; a corresponding receiver in the target device "sees" the infrared light and decodes it. The MBP's internal IR Receiver sends the received signals to the processor via USB through an internal hub.
The most recent MacBook Pros have dropped the IR receiver and no longer work with the Apple Remote. -
I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?
You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.
-
I have an ipod touch 3rd generation and the whole touch screen is not working.
I have a 32gb ipod which I bought for fifty dollars and when i bought it had a pretty baddly cracked screen but thing is it worked fine. Every part of the screen worked fine; it was as senstive where the screen was cracked as the areas of the screen that were not cracked. I dropped it a couple times from like two or three feet on two a hard wood floor about four times all it did was make the cracks on the screen a little worse. Then one day I dropped it from about a foot and now the whole touch screen is not working does anyone know why this is. They told me at the ipod store to get a new one would be 130 to trade mine in. But the thing is I very mechanically inclined and I am very good with electrionics; I was planing on buying the glass for fifty bucks and putting it on myself because I read how to do it and I am more then capapble of doing it. But now since the touch screen is now working; do I need a new screen along with a new glass? See the thing is because I think both those part cost 120 together. Which would not be worth me doing that when I can go to the ipod store and they would trade me a new one for 130 bucks. But the issue is, they told me at the ipod store they would have to look and see how damaged the ipod is to see if they will exchange it. My screen is severly cracked; also I have a dent that is a half inch long and 1/8th inch deep in the back of my ipod and its very scracthed up; do you thing an ipod store would exchange it in the condition it is in. Also has anybody had this problem before and I was wondering if it would be possible for me to take it apart and fix it my self without buying any new parts.
If I were you, I would pay the $130 for a replacement. Then you can be sure that it has all the working parts it needs.
-
i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?
Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/ -
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
Maybe you are looking for
-
I can't install Speedgrade 7.1 on my windows 8.1 Toshiba laptop
I can't install Speedgrade 7.1 on my windows 8.1 Toshiba laptop in order to get dynamic link. Does anyone know why? Speed grade 7.1 doesn't show up on my cloud update panel either. I have new Toshiba Qosmio laptop.
-
PLEASE Help! My Boss's Movies are missing from iTunes!
Some one please help!! And with good news!! I am helping my boss install a second Apple TV to show short clips of patients that we have made using iMovie for iPad. This Apple TV is a second gen. The first Apple TV is a first generation and we hav
-
Preview app not working in 10.10.2
Ever since upgrading to 10.10.2 the Mac Preview app has not been working correctly. Any file I create in it (a scan, a print-to-PDF, a screen-shot, or the like) cannot be saved. It gives me a message to the effect that the file cannot be saved beca
-
"Mounting Failed" - downloaded driver for HP deskjet 6980
I downloaded the printer driver for my HP deskjet 6980 and when it finished downloading it said that mounting failed. Why would this be?
-
Is there a SAP note which lists the diferences in mapping functions: SAP XI vs PI ? I see some functions are implemented differently ,just wanted to have a list / SAP OSS note . Thanks