Screen Saver lasts less than a second (Wireless USB Mouse)

When I put my pointer in the hot corner (lower left), the screensaver activates for less than a second, then goes off as if I've moved the mouse or pressed a key. The pointer disappears, then reappears immediately in the corner before the screensaver goes off, so that makes me think the computer is thinking that the mouse is moving (which it is not) and thus turns off the screensaver.
I recently updated to Mavericks with the exact same mouse I was using before, which is a Microsoft Wireless Mouse 5000 with Intellipoint installed. The only way to switch off the mouse would be to disconnect the USB or remove the batteries from the mouse.
http://jimlapbap.com/files/preview/Screensaver.mov
Also, the screensaver is set to go on after 20 minutes, but it never does.
Any advice/help would be appreciated.

The problem is no longer there. Repairing permissions may have been the solution, but I'm not sure because I tried a lot of things.

Similar Messages

Warning screen pops up for less than a second then disappears

After I upgraded to Mountain Lion, occasionally a warning screen with the yellow '!' pops up for less than a second then goes away. What does trhis mean, does anyone else have this problem?

Never seen it - never heard of it. Does it popup while you're using any particular application? Is it like a dialog box? It could be some third-party application trying to warn you... about something.
Clinton

Changing web server refresh to less than one second

I just set up another PC on our network to display our engine test VI. Is there any way to increase the refresh rate to less than one second. I tried entering .5 sec on the config screen, but it changed back to one second. I'm using LabVIEW 8.5.1.
Thanks,
Todd Munsell
Wood Group Pratt & Whitney Industrial Turbine Services
Todd Munsell
Turbine Engine Test Technician/IT Tech
Wood Group Pratt & Whitney Industrial Turbine Services, LLC
Plattsburgh, NY

Thanks again. I'll try that.
BTW, I just spoke with out rep from Daytronic Corp. who was testing the comm cards with his System 10 and PC. They worked fine for him. The only difference is that he is using LabVIEW 7.0 and we are using 8.5.1. They don't have any subVIs written for the newer LV versions. That may be the cause the the issue we're having with using the comm cards to access the DAQ. They do not have the time or money to update their subVIs for the newer LV versions, but I'd have to think that there is a way to change them myself to make them work. Ideally, I want to use a modified version of the app I'm using on another PC without having to bother with the network to pass the data. I already have a cable made to connect the other PC to the System 10.
I almost forgot something.... I found a version 8 System 10 subVI package using the NI search, but it didn't work either.
Do you know what might have changed in the newer LV versions that could cause this issue? I've attached a zip file of their subVIs. Like I mentioned earlier, LV works fine using the main (built-in) comm port on the System 10 DAQ. It's just the additional cards that do not work correctly. They seem to establish the comm link OK, but the binary data that the System 10 sends is not interpreted and displayed correctly. It's usually all gibberish on the screen.
Of the Daytronic subVIs, the subVI that I use to test with is the "example.vi", which is used for binary data.
The "simple terminal" subVI works fine, but I can't use it to test the data link since it's configured differently.
When I use the main System 10 comm port, the simple terminal doens't work and the example.vi does. Why wouldn't it work with the other ports/cards?
Could you please check these out when you have the time and see if you can find something that isn't configured correctly? I may be overlooking something obvious, since I'm still learning LV.
Thanks
Message Edited by tmunsell on 07-28-2008 09:18 PM
Todd Munsell
Turbine Engine Test Technician/IT Tech
Wood Group Pratt & Whitney Industrial Turbine Services, LLC
Plattsburgh, NY
Attachments:
labvdr7.zip ‏891 KB

Firefox Crashes in less than 5 seconds after opening it, randomly.

Here's my problem.
When I load firefox, 3 to 4 times in a row it will open, and then simply vanish in less than 5 seconds. Then the next time I try to open it - It works. WTF?
It won't even give me a Crash screen, It just vanishes.
Sometimes even, It just hangs at the homepage, to which I have to C.A.D. it.
This is happening all the time and its really getting annoying. I open a page, it crashes, repeat, repeat, repeat, and then success.
I am running a freshly installed Windows XP home 32bit, with all drivers and updates installed, blah blah blah...
Using Firefox 4.0.1
Things i have tried:
Opening multiple Firefox windows at once from the desktop, and regardless of how many, it crashes.
Changed my home page to alternative sites ( Google, Youtube, Hotmail etc.)
Made sure firfox was up to date, including all add-ons.
Tried disabling addons
Tried running firefox in safemode.
Tried running firefox in safemode, with add-ons disabled.
Re-installing firefox, with and without updates.
Tried it on a friends computer, clean install without add-ons and it worked.
Hitting my computer ( lol, j/k )
Im quite fed up with this. I've never had this problem with any versions previous to 4. Yes, that means V4 did this to me as well.
The times I can get Firefox started, I have no problems at all, Its smooth sailing.
Everything else on my computer works great, so I'm sure it is just firefox.
Anyone have any ideas?

Firefox is likely to be [[firefox hangs|hanging]] rather than crashing, which explains why you get no crash reports.
The problem is likely to reside in your [[profiles|profile]] which is why reinstalls and [[safe mode]] do not help, but using a friends computer's Firefox works.<br/>(using a new clean profile would also be expected to work but may not be the simplest thing for you to do<br/> - and you could loose access to some data)
The ''"CAD"'' approach in XP will start task Manager that may be used to kill the process that is a one off solution to [[Firefox is already running but is not responding]] you will need to follow up to figure out why it is hanging repeatedly.
Follow the links I have posted, and further links in those articles if necessary, the articles should explain the problem and how to resolve it better that I could. Post back with how you get on.
If it turns out it is crashing you will need to look at [[Firefox crashes]] and follow up for a crash signature.
Good luck.

ITunes 11 - Songs less than 10 seconds long - Play count doesn't increase

The title pretty much sums up my problem. Installed iTunes 11 a couple of days ago and have noticed that any track less than 10 seconds long (of which I have quite a few) will play okay in iTunes but the play count doesn't increase when the track finishes. Anything 10 seconds or above increments fine.
However, if the same short tracks are played on the iPod then it is synced, the play count goes up no problems.
Is this a "feature" of version 11 or a glitch does anyone know?

I recently started having the same identical problem when playing iTunes on my computer (WinXP). Songs play and move between computer and iPod without problems. Songs under 10 seconds are noticably affected. The number of plays and last date played do not increment. Haven't seen longer songs affected but really haven't been watching until now. In one case increased the song length from 10 to 12 seconds. It now works. But songs that did work that are under 10 seconds, now don't. Currently using v 11.0.2.06. Nothing new installed on computer.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

That's probably a bookmark you have saved in Favorites.
Tap bookmark icon>Favorites>Edit>Delete the bookmark

Photoshop CC 2014 stops working after less than 30 second and shuts down

I have installed and uninstalled Photoshop CC 2014 three or four times via Creative Cloud and each time it stops working after less than thirty seconds and shuts down the program. I then installed a an older version of Photoshop CS5.1 from a CD and it works perfect. I also have Illustrator CC 2014 and Lightroom 5 installed from Creative Cloud and both work flawlessly. What can I do to get Photoshop CC 2014 working?

You have not provided any system information or crash logs, so we can't really know.
http://myleniumerrors.com/working-with-your-operating-systems-tools/
Mylenium

I just downloaded the trial of Photoshop. Every time I try to open it, it comes up with an error message and closes less than 5 seconds into being opened.

I just downloaded the trial of Photoshop. Every time I try to open it, it comes up with an error message and closes less than 5 seconds into being opened. Does anyone know how I can fix this? I tried rebooting my computer and reinstalling photoshop. Thank you!

i7 is quite fast. that's what i am on too. You may need to
It would be necessary that you have to use "Adobe Creative Suite Cleaner Tool". (see Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 )
The order varies depending on your individual needs:
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2. Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Did you already try "uninstalling and re-installing"? Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool. Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4. If necessary and for further questions click through http://helpx.adobe.com/contact.html or http://helpx.adobe.com/de/contact.html or
Det finns också ett svenskt språkiga chatt. http://helpx.adobe.com/se/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.

Skipping track after less than 1 second

I have downloaded iOS7, and I tried to delete some track from iTunes that I never listen to. Somehow, several of the songs on my iPhone have now started to skip onto the next track after less than a second of playing. I can still play the songs from iTunes on my PC, so I seem to have done something with the phone and I don't know what! I changed the settings from 'Phone' to 'Library' in the 'shared' music menu - I think that's what caused the problem, as now it seems fine having just changed it back. It's so frustrating that you can't get rid of music you don't want on your phone! There must be a way of doing it without shelling out for Match.

Do you have a circle with a red square next to some of your songs in your music app on your phone?

SSRS report is consuming much more time to fetch data from DB even direct run SP takes less than a second

Hi,
we are using SQL SERVER 2008R2 X64 RTM version.
One of the SSRS report designed by developer is consuming much more time( 5 to 6 minutes ) to fetch data from DB. Even direct run of Stored Procedure (Called in report )takes less than a second to display the result set.
Please help.
Regards Naveen MSSQL DBA

Hi Naveen,
Based on my understanding, you spend a little time retrieving data with a stored procedure from database in dataset designer. However, it takes long time to run the report to display the data, right?
In Reporting Services, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. In your scenario, since you mentioned retrieving data costs a little time, you should check the table
Executionlog3 in the ReportServer database to find which section costs most of time, TimeProcessing or TimeRendering. Then you can refer to this article to optimize your report:
Troubleshooting Reports: Report Performance.
Besides, if parameters exist in the report, you should declare variables inside of the stored procedure and assign the incoming parameters to the variables. For more information, please refer to the similar thread:
Fast query runs slow in SSRS.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Less than a second of audio on 2 of my audiobooks

Before I left on vacation, I added 3 audiobooks to my IPod. I listened to and finished one of the audiobooks on the trip but when I went to start the next one, I only got less than a second of audio and the counter was stuck at 10 seconds. The same thing happened with the other audiobook. I tried to restart my IPod but that didn't work. When I got home I checked the audiobooks and both of them started up as if nothing happened. I don't know what to do.
David Blain

yep. Time for a new phone. That one's cooked.

I have been taking photos for years and have thousands. When I use Apple TV screen saver, it seems only to grab a handfull and repeats them. Is there a configuration setting that will allow me to have the screen saver grab more than just a few? Thanks.

I have been taking photos for years and have thousands. When I use Apple TV screen saver, it seems only to grab a handfull and repeats them. Is there a configuration setting that will allow me to have the screen saver grab more than just a few? Thanks.

The device has an 8GB drive for caching streamed meida, a small portion of that is used to temporarily store photos for the screensaver. It may vary depending on resolution etc but it seems to be around 100.

Measure time of an measurement and if measurement time is less than 90 second wait until 90 second and then proceed to next steps or stop.

Hi
I am trying to make a program
      During execute a measurement count the time.
      If measurement time is more than 90 second proceed to the next steps (or stop the measurement)
      If measurement time is less than 90 second, wait until 90 second and then proceed to next steps or stop
I appreciate deeply if some help me.

What sort of measurement are you talking about? What affects the time of your measurement? The very basic description you have is of a state machine and there are numerous examples of that
1. Actually I would like measure the time of "Alignment" function done by wafer test equipment name Prober ( the model is "UF3000" made by TOKYO SEIMITSU CO., LTD.
2.. Right now the "Alignment" function is started when a GPIB command is written as "N" and wait for resposne 70 in polling.
Please refer to the attachment for Alignement function if it help you.
In the attahement
For Alignment error delay we are using =600
Alignment counter =30000
align loop cnt = 30000
This is a program wriiten by another person and he is not availabe any more. What I am trying to do is
1. During execute a "Alignment " function count the time.
2. If  "Alignment " function time is more than 90 second proceed to the next steps
3. If "Alignment " function is less than 90 second, wait until 90 second and then proceed to next steps
Attachments:
Alignment function.xlsx ‏153 KB

Ordinary outgoing calls are stopped in less than a second

I was extremely satisfied with my new I-phone 5S until I tryed to call a friend of mine. The call was stopped in less than a second. Rebooting and resetting have had no effect, I simply can´t use the phone! I have no problems recieving calls or using FaceTime. Any suggestions?
Knut Kvinnesland
Norway

Thank you for your expedit answar, h.wilhite. I did, the SIM-card was okey and activated...they argued. Maybe I should just check the SIM-card in another cellphone?

Screen Saver lasts less than a second (Wireless USB Mouse)

Similar Messages

Maybe you are looking for