Screen Sequence for Mov Type 301

Dear All,
I am doing two step transfer from one plant to another plant belonging to two diff company codes. When I use 301 movement type, the item detail data is coming at the top and the header data is showing at the bottom of the screen.
Please suggest where can I change this screen sequence for this movement type.
Regards
VT

I am sorry, Its a typing error. I am talking about 303 itself. When i try to post material document with 303, the item detail is showing at the iter overview's place and vice versa. Could you please suggest where can I change settings so as to get the correct screen sequence?
Regards
VT

Similar Messages

Capture excise inv for movement type 301

Hi All,
can we capture and post excise invoice for movement type 301.
If "YES" so plz give me detail.
Thanx....
Trupti

Hi,
I think you can do it.But you have treat this as stock transfer purchase order and you have to do the billing through the SD module. For details you can check with MM Forum.
regards
ramakant

Plant transfers and purchasing orders tracing for movement type 301-310

Hi ,
When we do material transfer from plant to plant( MVT 301-310) it creates the material documents in MSEG. What's the table or the best way to find the purchase order details for the material documents created in MSEG or the materials used during transfers?
I appreciate your response
Thanks
Reddy

Hi ,
Go to table EKKO , put purchase Doc category ( must be different for Plant Transfers ) and also try out Supplying Vendor and Customer Fields..
VAT Registration no can also be part of your selection..
Please have a look at EKKO fields available and make your appropriate selections..
Regards
Sarada

New Field addtion for movement types

Hi Everyone,
I want to add new field for movement type 301(vendor material no)can you please guide me how to accomplish this task.
Thanks
Venkat

Dear,
Do the 311 movement through the MIGO and then set field for MIGO
Vendor Material No. GOITEM-IDNLF
Vendor Material No. GOSEARCH_PO-IDNLF as highlited filed in OMJX
Or else with MB1b you can use the text fiied for Vendor Material no.
Hope it will solve ypur problem.
Regards,
R.Brahmankar

Customize Header Test as Mandatory for Movement Type 350

Dear colleagues,
If inspection lot is rejected, i.e. stock is posted to blocked stock in transaction QA11, document header text must be mandatory.
I have tried setting “Field Selection for MIGO” and “Goods Issue / Transfer Postings >Define Screen Layout” for movement type 350 but those didn’t work out
Is there a solution without custom development?
Regards
Melih

Doubtful. There is a user exit to check the UD. You might be able to use that to see if the text you want is populated. If not give the user a pop-up error box and don't allow the UD to be saved until the text is populated.
A rejected characteristic can require text. This is in the control indicators. Maybe you can leverage that somehow.
Craig

Stock Transfer for Excisable Materials Using Movement Type 301

Hi,
We are having a Plant 1002 as excisable Materials.
During GR we following the process like GR (Part -I), Capture Invoice, Post Invoice.
Can we transfer the Material from Plant 1002 to other Plant, say 1001, using Movement Type 301?
Or we need to follow some other router for Stock Transfer for the Excisable Materials?
I was told by the ex-consultant that we would be using Mov Type 301 for all Stock Transfers, but I have a doubt, please guide.*
Regards,

Hi PK,
Here in Brazil we work with excisable material and when we have to transfer it plant to plant, we have to use IVA that performs tax posts on accounting document. Also, we have to create Nota Fiscal (BrazillianLegal Document).
I think you have to talk to your legal/accounting area in order to make sure which procedure you will have to use.
If you need tax posting on accounting document, then you will not be able to use 301 movement type.
We use MM/SD Plant to Plant transfer (movement type 861 / 862)
Depending on your Legal/accounting area feed back, you could use this scenario or just MM plant to plant transfer (movement type 303/305).
If they are ok with no tax postings on accounting document, then 301 movement type should be used.
Try to make a test, show then how it works, then you could get ok from then
I hope it helps you.
Best Regards,
Natan

Automatic batch number in migo_tr with movement type 301

Hi!
I am trying to do a transfer from a plant to another with MIGO_TR movement type 301.
The thing is that I must enter manually the batch number in the destination plant.
Is there a possibilty to configure the system in order to copy in batch number field for destination plant the same batch number entered in the plant from where I want to transfer?
Thanks!

your system does not work like designed
please read this very old but release independend OSS note 555 - Batch treatment during stock transfer and transfer posting:
Key word: Transfer batch
If you enter materials for stock transfers or transfer postings with movement types 301 to 316 via collective processing and in this case enter the batch number for materials to be handled in batches, the system automatically sets 'Receiving batch' equal to 'Issuing batch'.
Additional key words
Cause and prerequisites
The collective processing screen does not provide space for an additional transfer batch in the two lines provided for a material movement.
Solution
During the stock transfer of material, the batch is usually retained. If you want to change the batch number, you have to enter the item in question step by step (F8=New item).

Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

Hi All,
Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
Please advise or help me .
Thanks in advance!
Regards,
Praveen

Hi
The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
Anyway, you first need to make the field as optional for example, before you move.
One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
regards
Sidi

Stock Transfer by movement type 301 referring STO

Dear Experts,
I am unable to generate a stock transfer referring an STO in MB1B or MIGO by movement type 301. I am successfully doing whenever I refer a Reservation. Please advice.
Regards,,
Subhro Chakravarty

Hi,
i have to ask you to read the SAP Documentation for 'Stock Transfer Using a Stock Transport Order'.
It is explained there how to post a goods movement for STO.
http://help.sap.com/erp2005_ehp_04/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
br, G

Error in Transfer posting for movement type 303

Hi Sir,
I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
Error in Function:
Order    not found or not permitted for Goods Movement.
I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
Transfer posting
Transfer posting without reference to a reservation
The following fields must be populated:
Material number
Plant
Storage location
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
Please help me .........
Regards,
Krishan

I'm not sure what you're system set up is...   So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
With that said our system does require posting date, and batch. You might check that.   Also check that you've included all the required information in the header.
Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually?

Field selection for movement type 601 account 894025 differs for cutomer

While posting goods after saving delivery merror message
Field selection for movement type 601/aact 894025 differs for customer goods movement
I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601 KONTO Optional field
Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
Please provide your valued inputs why this is happening?
Thanks for your time.
Rajiv

Hi Raja,
Thanks for prompt reply.
I shall appreciate if you elaborate how to check
check the Field selection goup in control tab for that GL
I tried OBC$--> (Is this correct?)
I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
Profit center, cost object are in G004 as supressed field.
So should I make optional? So thing will work.
Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
Thanks for yr time.
Rajiv

Different Consumption Account for Movement type 201 and 261

Dear All ;
Client want use different consumption account for movement type 201 and 261 .
How we canmap this in SAP
Kindly suggest .
Regards;
Joydeep Mukherjee

This you can acheive by setting account assignment indicator is checked.
OMJJ >>> Movement Type >>>Account Grouping >>Check account Assignment
If this indicator is set, the system checks whether a G/L account or an account assignment has been specified on the item screen when user post transactional data. If so, the system copies this data to the posting line for account determination.
If this indicator is not set, the system always uses the G/L accounts or account assignments determined automatically.

How to do a screen sequence for a standard transaction?

Hi experts -
I have a requirement that the business wants a field on transaction VL02N to be grayed out based on specific delivery types. I have been told that that would require a custom screen sequence to be developed.
(1) What is the best solution to accomplish this?
(2) If the solution is a custom screen sequence for the standard transaction code VL02N, then how is that done?
Many thanks!
Mark

When one says "custom screen sequence" an Industry Solution that utilizes BDT, like Insurance or Gas/Oil comes to mind. Are you working with one of the BDT-based Industry Solutions in SAP? If so, customization by field-group or screen or view could be considered, but I think you'd find a much simpler way to do.
If not, one usually does this with an exit that allows control of screen elements, as does SD Order processing, a Badi implementation or enhancement in a PBO module for the screen to set the screen-input value to '0' for that field name.
You should, though, search the forums, since these kinds of questions are often asked....and answered....such as:
[VL0xN exits|VL01N / VL02N Exit;

Message type control for movement type

Hi All,
We are using two movment types,
301 - Plant to plant transfer
934- initial stock entry reversal(custom one).
Issue is when ever available stock of materia lM1 is consumed against some sales orders , if we try to do transfer posting using transaction MB1B MOVEMENT TYPE 301 system is throwing error message zero pcs available for M1 and not allowing us to post which is correct (messge M7 181).
But for the same material M1 if try to post using transaction MB1C and movement type 934 system is tHrowing warning message zero pcs available for M1 , but allowing to post there by removing the confrimed / consumed stock from the sale order. here also the message is M7 181.
So please let me know can same message type is used differently for two different movement type. If so where is the setting is being done.
Regards,
Babs

Dear ,
Because u already book for sales orders so release the sales orders you can do, or increase the stock and u can use .
regards
shiv

Layout for movement type 101 (MB01)

Hi experts,
1) I would like to know more on how can I define the layout for MB01 other than using screen variant?
2) Also, I would like to know more on how can I define layout for movement type lower than 201?
I can only do that for movement type > 201 in SPRO.
Thanks and regards,
JT

Hi Parag Mahajan,
Just want to double confirm with you about this.
What if I want to grey a field or make it available for user to make changes to a grey field?
My problem is tcode MB01, the Document Date field was grey and defaulted to today's date. I want to make it available and allow user to change the document date.
Thanks and regards,
JT

Screen Sequence for Mov Type 301

Similar Messages

Maybe you are looking for