Screen Settings in the order IW31 / 32

HI
How to display the user status below the sys status in the Tcode IW31/ IW32
Alagesan

Hi Alagesan,
You can use Active GUIXT as suggested by DP Singh. This is very easy to change the positions of the fields in a Screen and Tabs.
It is available from 4.0B version itself.
It has a restriction. Once you done the required modifications in one system, you need to copy to all the systems in which you use PM Module. Also always GUIXT has to be swithched on.
Easy and no complex changes to programs.
MLN Prasad

Similar Messages

I dont know how to get to the touch screen settings because the touch part(not screen) wont let me. it lets me drag to the stuff and some lady says something in the earphones

i really need help

Sounds like VoiceOver has been enabled. See this article for instructions on turning it off.
iPod nano (6th generation and later): How to use VoiceOver
B-rock

How to change the screen settings in my laptop

Hello. I have a Satellite Toshiba laptop and as my daughter started pressing some buttons she changed the settings on the screen. When I go to my email or to some web pages the page and the letters look bigger and maybe of a different style, although my screen zoom level remains at 100% and then they are too small if I put the zoom at 75%. I tried to change the screen settings through the control panel but couldn't find something useful and then when I tried to restore the system to an older restore point so I can go back to my old settings it wasn't able to do it, even though I' ve tried different restore points (lovely windows!). Anyone has any ideas of what else I can do?
Thank you in advance!
Sandra

Probably one of these, Sandra.
Satellite A200-1J0 (PSAE6E-04R034AR)
Satellite A200-1J0 (PSAE6E-04R039HU)
Satellite A200-1J0 (PSAE6E-04R03DRU)
The best resolution of that screen is 1280 x 800.
This site is for models made in the USA. You'll find your drivers and utilities here.
-Jerry

How can one change the order of the issues (folios) in a custom viewer?

Hi,
I am trying to find how one can determine the order that the issues (folios) will appear in a custom viewer (multi-folio with subscriptions).
I tried to rearrange the order by changing the publication date in the Folio Producer Oorganizer, but it has no effect in the iPad custom viewer.
Thanks

The publication date settings determine the order of the folios in the library, so that should work. Did you update the folios?

Problem with Screen Settings

While using FotoMagico version 1.8 I ran a slide show in full screen. After the slide show completed it changed my screen settings. The best way I can describe this problem is similar to Windows and using large fonts. The screen now scrolls. I can not find a way to change my screen setting back to it's original setting. Looking for help.
Hardware is a G5 PowerPC iMac
OS is 10.4.9
Thanks.

If FotoMagic is changing the screen resolutions each time you use it and not changing them back, then put the resolution settings in the menu bar. At least you can change them back easily. Go to Preferences-Displays. Check "Show Displays in Menu Bar". This will allow you to change the resolution by clicking on the Display icon. Some programs are not very good at putting things back the way they were.

I've added to ios6 to my new ipod touch with no problems. I'm trying to now restore the factory settings but the screen is frozen with an itunes sign and lead pointing towards it. The ipod won't even switch off. Can anyone help as it's driving me crazy

I've added ios6 to my new ipod but tried then to restore the factory settings. It won't extract any settings and the itunes then tells me that the server cannot be reached or is unavailable. I've been trying all day. Now the ipod has a itunes sign and a computer lead pointing towards it on the screen and this is frozen. It won't switch off or do anything else. Any ideas as this is now driving me crazy.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Issue in the table settings of the screen.

Hi Expert,
I have an issue because some users are changing the Table Settings of the screen to display the sales orders. So if somebody make a change affect to all the systems so I want to find a way in order to limit the access to this setting.
Thank you and best regards.

Dear Alberto
Check with your basis team who can control this with restriction to selected user ids.
thanks
G. Lakshmipathi

HT1212 So my phone is messed up and you can't do anything with the screen...in order for me to sink it to back up i have to enter the passcode because it had a lock on it...and i can't due to it being messed up...is there any way around this...

So my phone is messed up and you can't do anything with the screen...in order for me to sink it to back up i have to enter the passcode because it had a lock on it...and i can't due to it being messed up...is there any way around this...

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

HT1351 I have a apple ipod touch but recently I restored all the settings, as well as the applications. But now I am not able to add songs to it. There is blank screen that shows the symbol like to connect to itunes first. I'm not able to use that... Plea

I have a apple ipod touch but recently I restored all the settings, as well as the applications. But now I am not able to add songs to it. There is blank screen that shows the symbol like to connect to itunes first. I'm not able to use that... Please help

The iPod's firmware is corrupt. You'll need to restore it again in iTunes. If necessary, place the iPod in recovery mode for iTunes to recognize the device. Use the instructions in this Apple support document to walk you through the process of placing the iPod Touch into recovery mode.
iOS: Unable to update or restore
B-rock

Where did the halftone screen settings go?

I've just downloaded Photoshop CS5 and am desperately seeking the halftone screen settings. It used to be in the print dialogue, but it's no more there. Where did it go? And yes, I have chosen a PostScript printer.

Found 'em.

What are the settings for rework order quality inspection

HI,
Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
What are the settings for rework order Quality inspection?

Refer beautiful document
http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio Cesar

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

In Firefox 4, how do I change the order of plugins on the Add-ons Plugins manager page (I turn Shockwave Flash on only to see videos - having it off prevents screen freezing - and so I want it stay at the top of the list)?

In Firefox 4, how do I change the order of plugins on the Add-ons Plugins manager page? I turn Shockwave Flash on only when I want to watch a video and then turn it off to prevent screen freezing, and so I want it to PUT it and KEEP it at the top of the list.

Hit Ctrl+0 (That's a zero, by the way). I'm not sure if it will work, but hey, that's the first thing I would try.

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

I recently got a an iPod 5 generation as a gift and while I was in my settings I turned on the voice over to check the percentage of my battery, so I turned it off and now I can't unlock it. Even when scrolled my fingers on the screen and typed the pa

I recently got a an iPod 5 generation as a gift and while I was in my settings I turned on the voice over to check the percentage of my battery, so I turned it off and now I can't unlock it. Even when scrolled my fingers on the screen and typed the password but it would unlock, please can some one help me with this

You have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

Screen Settings in the order IW31 / 32

Similar Messages

Maybe you are looking for