Screen share using Linux?

Will screen share work with a Linux machine?
How many people can be on that call at one time?
Thanks.

Good evening Lirein,
I've been doing some sniffing around and it looks like the only way I can get Skype to behave for screen sharing with more than one viewer is to use a Windows machine, sigh. Right now Skype screen share works about half the time.
I've tried lots of other programs for screen sharing on my Linux setup and have not yet found a good answer. The best so far has been Mikogo. Unfortunately they do not support a 64 bit system and that throws a wrench into my works.
To use a screen sharing program I will have to reluctantly use a Windows machine. I hope that changes some time soon.
Thanks for your reply.
John Teisberg

Similar Messages

New DSL connection prevents screen share, videochat

Previously, I was able to videochat and screen share with a remote computer using ichat. With that particular remote computer, I was never able to use vnc or finder-originated screen sharing, so I've always relied on ichat.
I switched from cable to Verizon's DSL internet service, and now I find that I can no longer screen share using ichat or use videochat. Sometimes my file sharing is also affected. I can also no longer access this screen from another computer from the finder, or access this computer as a file share from another computer.
I have enabled file sharing and screen sharing in the sharing panel. The remote computer also has screen sharing enabled. I have mobile me service, which syncs ok, and I can obtain a shared screen from my office computer, although this seems to be available only now and then.
Running ichat 4.0.8, OS 10.5.7 on both computers that I'm having trouble screensharing and videochatting between.
Any suggestions?
Thanks
Todd

Hi,
I have seen one post that remarked that the end user thought Verizon were now blocking VNC connections and that their reasoning was to stop Internet attacks on Home computers.
Seeing this is a common method for large companies to update remote computers particularly with Windows and is part of Apple Remote Desktop, And, that on all computers it has to be set to be allowed, this did seem a bit lame.
If you know the IP addressing needed to get from home to your work computer then using vnc:// instead of afp:// in Connect to Servers will invoke the Screen Sharing App that is hidden away in Leopard in Hard Drive/System/Library/Core Services (I have only done this over my Local LAN and don't know how to set it up or address it over the internet)
Your extras clues only seem to partially support the idea that VNC connections are blocked.
If Video chat were not working as well I would look to whether the Modem is allowing Response to Internet (Anonymous) Pings as I know iChat sends a Ping in Video and Audio Chats (and the screen Sharing includes a Audio feed.)
I would have looked on this site for more clues http://portforward.com/routers.htm as some of the Instruction pages include pictures that can be helpful in some cases.
I don't see your model listed which may mean it is really new and has not made it to the list yet.
Defcom either compared them a chose the most likely access defaults or found the info elsewhere.
This one which may be the closest model number has no real pictures in this case
http://portforward.com/english/routers/port_forwarding/Westell/D90-740010-06/iCh at.htm
This page is from a D-Link emulator
http://support.dlink.com/Emulators/di624revC/advfilters.html
It is Advanced then Filters (The Yellow items)
Do you have anything like this on your device ?
Does anything appear to be set ?
In this Tools and Misc page it has UPnP and other options that may need to be allowed. (WAN Ping Blocking is on this page for this device and it also has VPN stuff)
These pages/links are for clues only as most manufacturers of modems and routers layout the pages differently.
My thinking is that it is either something like a Firewall or filter or similar on the modem that need "Unblocking" in some manner to allow UPnP to "Fully" function or the ISP is doing something that they are not being too open about.
8:05 PM Monday; August 3, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

System Monitor no longer does screen share

Recently lost the ability to Screen Share using System Monitor.
2 things changed since it worked last:
1. Created a new user
2. Loaded Remote Desktop on New User
I desperately need this functionality
jim

If you're talking about the "Sharing" page of "System Preferences", then installing Remote Desktop will have changed the way screen sharing is set up. It's still there, but it's being controlled by a different service.
On the "Sharing" page, click the "Remote Management" service then click the "Computer Settings..." button. You can enable screen sharing with the VNC options there.

How can I use screen share of my mac mini? Problems validating

I recently purchased a mac mini to act as my home media server for audio as my airport express was not playing nicely with my Peachtree DAC. Anyway, I have set up sharing on the mac mini and can't figure out how to connect from my wife's Macbook, or her iPad. (I use a PC, so would welcome advice if available on how to connect across platforms as well.) My goal is to set up the mac mini without a monitor or keyboard connected to it and have it sit with our main stereo.
I am able to connect to the mac mini via my wife's macbook IF I ask for permission and I grant it from the mac mini. However, I am unable to connect no matter what I try if I try to log in as a registered user. I have tried to add her as a user to the mac mini, I have tried to log in as a guest, and I have tried to log in with a password but no matter what I try, I get an authentication error when I try to log in as an authorized user. For more clarity, here is what I have tried:
1. Added authorized users on the mac mini. I created a user name for "jeff", "maureen", and "lastname_maureen" on the mac mini and provided a password for each user. "jeff" and "maureen" are just created on the mac mini, and "lastname_maureen" is the user name of my wife's computer. I confirmed the passwords, and still am unable to connect. I have allowed any user on the network to access screen share, and no matter what I do I get an authentication error. Again, if I attempt to log in from my wife's computer by asking permission, it works fine but I can't figure out how to set up an account to login. Please help. Thanks!

Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?

I'm trying to use Mountain Lion Server so my family can have separate logins via Screen Share to their iTunes.

Using Mountain Lion Server so my family can have separate logins and connect via Screen Share.
Works great, each has their own home directory and permissions are perfect.
Now setting up iTunes for each with their own Library (not shared), thus keeping multiple Libraries.
I get this;
This Computer is already associated with an Apple ID.
If you download past purchases with your Apple ID, you
cannot auto-download past purchases with a different
Apple ID for 90 days.
What!
So what it is on the same computer, they are completely separate Libraries never to be mixed.
If this works, I only need to keep one computer up and running, instead of three.
Each can do their syncing/backup and connect to the various Airplay/AppleTVs I have around the house.
How do I fix this.
Thanks

Bottom line is you can't - easily.
You need to make sure that you log out of the server each time otherwise the ID is running. To explain, if you had a laptop with different people using it, your solution works fine. Each time someone logs in, the iTunes ID is different so it works as you can only have one person using the laptop at any one time.
Now, turning your problem inside-out, you want people to be able to log into iTunes concurrently to use their own version of the program with their own library. This does not seem to work and you get the conflicted ID error message. Even though iTunes is running under their own login ident, I have never been able to get this working reliably and was told that iTunes is NOT a network-aware application as it is designed to be single user.
The way I got around this was to login as XYZ and to make sure that the ID was changed in iTunes accordingly. However, it did not always work so I gave up with the whole thing.

No Video, No Screen share, No idea how to use it.

I have only ever used iChat to msg back and forth with friends overseas. However, in the last few years I have converted my whole family to Apple and they want to start video chatting. I have read countless discussions and maybe I'm not looking in the right area because really I have no idea how to look for an answer when I not sure what the right question is.
So here is my question. How do I set this thing up? I do not know that much about routers and ports and all that but I will list what I have and maybe someone can help me out. I as well as the rest of my family have iChat4.0.7 and Running 10.5.6 for the OS. I am hooked up to the internet via wireless router Lynksys WRT350N. I know how to set the router up so that it's not broadcasting it's name and so it has a hefty password but that's about it. When it comes to ports and know where to type in TCP 5190, 5220, 5222, 5223, 5298 or UDP 5190, 5297, 5298, 5353, 5678, 16393-16402 I have no clue.
I log onto ichat via AIM and Google. For my Google it is connected to talk.google.com for the server out port 5223 and use SSL is checked as far as AIM the server it slogin.oscar.aol.com port 5190 and use SSL is checked.
By the way I can share screens with my wife in house on the same router but not otherwise.
I used to be able to share screens and log onto my edit suite across town when I had to remotely help another editor but now when I bought my new MacBook Pro I can not do that anymore. This might be a completely different topic that should be listed under a share screen discussion board... not found that one yet.
If more information is needed please let me know and I would be glad to give what I know to fix this. It really should not be this hard but for me it seems to have stumped me really good.

Ok,
There are different methods of opening ports or allowing applications to use ports in a modem or router.
AS you want to Screen Share then it would be best to use UPnP (Universal Plug n Play).
Te Linksys will have this in the Adminstration page of it's set up page s that you can access in a web browser.
Use these Instructions only as far as gaining access then go to the Administration page/tab.
Enable UPnP
Go to the Security tab and Allow it to Respond to Anonymous Pings
Lets us know when you have done that.
9:03 PM Thursday; December 18, 2008

How to create and use file share in linux

Hi,
I just started trying out Azure, I have 2 linux ubuntu instances. I would like to create a File share to use as a type of NAS and mount it on both of the instances.
How can I go about doing that? Is there a tutorial?
thanks
Ricardo

Hi,
We can use Azure File services to do this, for more information, please have a look at this article:
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx. The Azure File service exposes file shares using the standard SMB 2.1 protocol. Applications running in Azure can now easily share files between
VMs using standard and familiar file system APIs like ReadFile and WriteFile.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Latency using Screen Share

I am experimenting with Screen Share in Lion (did not use in SL) and am having latency issues. MacBook taking control of iMac i7 quad core not too bad but iMac i7 Quad Core controlling MacBook is horrendous. Any ideas to speed things up?
Also trying to connect either way using "Apple ID" not working, only will connect using "Registered User" any thing to help out here would be great. Thanks

Just updated to 10.7.1 and all seems to be working great!

After the 10.9.2 upgrade I can't screen share with any Macs using Back to my Mac.

I did the 10.9.2 combo upgrade on a bunch of Macs I manage and now I can't use Back to my Mac for screen sharing on any of them. Does this upgrade mess with the original settings? Any suggestions? Anyone else see this?

Back to my Mac has been unreliable for me (and a lot of other users) ever since the Mavericks upgrade, 10.9.0.
I find that if I turn all screen sharing off, then back on again, remote macs can share my screen. But the fix usually lasts just a few days, sometimes as little as 24 hours.
So everything depends on me remembering to open Sys Prefs and then toggle Back to My Mac (in iCloud) and Remote Login, File Sharing, and Screen Sharing (all in Sharing) in the morning before I go to work. If I remember, I'm able to do screen sharing that day from work. If I forget, I'll get errors when I try to Screen Share via the link that appears under Shared in the Finder sidebar. The link is reliably present in the Finder sidebar, it just doesn't work if I haven't refreshed the Sys Prefs settings.
Hope this workaround is helpful. Wish they had a more permanent fix.

Could Troubleshoot a Mac Using Screen Share From 30 Km Away?

Hi. How far does Screen Share work? Could it be used to troubleshoot a Mac from another city or from a really far place?
Do you have full access to the other Mac using Screen Share. What can it do?
Gbu.

It would be most accurate to say it works exactly as it would as if you were sitting in front of the actual Mac. For example, if you do something like install software and the other Mac asks you for the admin password for that account, and you don't know it, the installation will not proceed. But otherwise you can click and drag and type anything you want.
Screen sharing works a lot like the other "sharing" services on a Mac, it is primarily and most easily used on a local network, but there are ways to use Screen Sharing across the Internet. They are the same ways as for any other network sharing service, which is, you have to know the IP address of the router that the Mac is behind, and there must be a port open the router to let outsiders in who know the password, and then you tunnel through to the actual Mac you want. You can look up Mac screen sharing over the web in Google.

Correct Password Using Screen Share But Incorrect While Connecting To Serve

I have two computers networks together both running Leopard. I am able to use screen share to take control of one of the computers but when I try to connect to it to view files I keep getting told that my usename or password is incorrect. However I am using the same username and password for both and I am logging in with an administrators username. My question is why would it accept there username/password combination for one function then deny it for another? And I do have file sharing enabled on the computer that us rejecting my password.
Thanks

i have the same issue.
Was working fine a few days ago and now I can't access the airport configuration through the windows utility.
Had version 5.4.1 installed, then tried 5.4.2
Still no go

Can I play WMV files in a PPT using screen share?

Will the embedded WMV files in a PPT play correctly using screen share? My CEO has a presentation through Adobe Connect. We plan to screen share. Does this allow Connect to play WMV files? I've google over and over but I seem to get answers for file share instead.

If you convert the videos to MP4 or FLV you can upload them directly to a share pod and play them back in the room. Please don't play videos through screen share for the following reasons:
Screen sharing runs at 3-5 Frames Per Second (FPS), while your video runs at around 30 FPS. Thus your attendees only see about 10% of the videos frames and that makes them look choppy.
No audio is broadcast through your screen share, it is just the image of your monitor.
Window's media player (the player most likely to play back WMV content) has anti-piracy stuff built into it, and it notorious for blocking the media from being capture by a screen recording application, which Connect's screen sharing functionality tends to fall into.
It will just make you and your attendees angry and frustrated.
Supported file types in the Share pod: PPT, PPTX, PNG, MP4, F4V, Adobe PDF, SWF, FLV, JPEG, and MP3 file types
To have a video embedded in your PPT that plays back in a Connect Meeting you will likely need Adobe Presenter 10

How can i share contact from recent call screen? Used to go to right side of number and it would pull up your options, but share contact is not there anymore

how can I share contact from the recent call screen? Used to be able to touch right side of number and have that option. It is no longer there.

Touch the cirle i and then scroll down to share contacts. I just tested this out myself.

How to blank laptop screen when using external monitor/

Hi there
I need some help with figuring out how to configure my xorg.conf for my Arch Linux 64 bit installation on a HP Pavilion dv 5000 laptop so that I can automatically blank my laptop screen when using an external monitor. I have Arch Linux installed along with Ubuntu Feisty. In Ubuntu my external monitor (Viewsonic 1912WB) was not detected at the time of installation but with the native 1280X800 resolution that is good for the laptop takes effect for the external monitor automatically when the external monitor is plugged in. The laptop monitor goes blank when the external monitor is plugged in.
In my Arch Linux installation I have not been able to configure a dual head configuration using the ATI Radeon drivers (fglrx). I have the native 1280X800 resolution set up for the laptop monitor and this resolution takes effect for the external monitor also. However the laptop monitor also continues to function when the external monitor is plugged in. I would like to blank the laptop monitor when using the external monitor.
I am attaching my Arch Linux xorg.conf and the Ubuntu xorg.conf below. Thanks for anyone who can help, I am having a lot of difficulty in figuring out how to set up xorg.conf among all the things that I have had to learn so far in Linux and I am a relative newcomer to the whole thing. I have tried to compare the two xorg.conf files and edit my Arch xorg.conf in accordance with the Ubuntu one but it did not work and I keep getting errors!
I am using XFCE as my Desktop environment.
Arch Linux xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option    "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option    "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option    "XkbRules" "xorg"
Option    "XkbModel" "pc104"
Option    "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option    "Protocol" "Auto" # Auto detect
Option    "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option    "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 30.0 - 62.0
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option    "VendorName" "ATI Proprietary Driver"
Option    "ModelName" "Generic Autodetecting Monitor"
Option    "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "* Generic VESA compatible"
Driver "vesa"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Ubuntu xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Driver "ati"
BusID "PCI:1:5:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection

Xrandr 1.2 provides means for this. But today the only supported configuration is xorg-server-1.3 + xf86-video-intel-2.0. So for Radeon you'll have to wait for drivers that support Randr 1.2.
On my laptop (Thinkpad x60s) that would be:
xrandr --output VGA --auto
xrandr --output LVDS --off

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

Screen share using Linux?

Similar Messages

Maybe you are looking for